CS Paper Radar

On the Multi-Weight Shift-Sum Iterative Decoding of Short BCH Codes

Yinglei Yang, Di Zhang, Aimin Li, Yifei Shen, Alexey Frolov, Bo Gu

cs.IT eess.SP ·submitted 2026-10-12 16:02 UTC · v1
publishedtheoryhot direction

Abstract

This paper investigates a shift-sum decoding algorithm that employs dual codewords. Existing dual codeword shift-sum decoding schemes mainly rely on minimum-weight dual codewords. However, the number of such codewords is often limited, which restricts the amount of reliability information available to the decoder. To address this issue, we extend the component counting mechanism from minimum-weight dual codewords to dual codewords whose Hamming weights lie within a prescribed upper bound. We further introduce a normalized component counting rule to suppress the overcounting bias caused by the much larger populations of higher-weight classes. Based on this framework, we develop a hard-decision iterative error reduction decoder and a soft information-aided iterative error reduction decoder. Numerical results show that the proposed method consistently outperforms existing minimum-weight shift-sum baselines especially for short codes where additional dual codeword information is particularly valuable.

Journal ref
IEEE Globecom 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Iterative Bounded Distance Decoding With 2-Bit Reliability Marker For Product-Like Codes

cs.IT ·2026-10-15 ·Xiaowei Wu, Min Qiu, Yueying Zhan, Lei Yang
similarity 0.63
Abstract · Accepted by IEEE Information Theory Workshop 2026

We propose a novel soft-aided hard-decision decoding scheme for product codes based on two-bit quantized reliability markers. In particular, one bit is used for a two-level tolerance miscorrection check to validate the bounded distance decoding (BDD) result, while the other identifies bits to be randomly flipped upon BDD failure and miscorrection. List decoding is incorporated to further facilitate the error performance. Density evolution is performed for the design of the quantization thresholds. Compared to iterative BDD, the proposed scheme requires only moderate increases in memory and computational overhead. Simulation results verify that our scheme outperforms several unquantized soft-aided decoders, while maintaining small memory costs and low BDD attempts.

0.38

Optimization of Finite Alphabet Message Passing Decoding on Fully Node-Parallel Architectures for 5G LDPC Codes

cs.IT eess.SP ·2026-11-11 ·Alexander von Bank, Oliver Griebel, Eike-Manuel Edelmann, Norbert Wehn, Laurent Schmalen
similarity 0.63
Abstract

In this paper, we propose a novel design method for the lookup tables (LUTs) of the minimum reconstruction, computation, and quantization (min-RCQ) LDPC code decoding algorithm. The proposed design method uses Bayesian optimization and samples from a subspace of the design space. The novel design method does not require knowledge about the channel or the modulation format and uses the frame error rate (FER) as loss function. The design method is applicable to irregular low-density parity-check (LDPC) codes with puncturing and shortening. Furthermore, the design method creates a set of iteration-agnostic LUTs that can be used over all iterations, which makes this approach suitable for fully node-parallel decoder architectures. We show that our proposed approach achieves a 38.6 % better energy efficiency than a state-of-the-art normalized min-sum (NMS) decoder without loss in error correction performance.

0.20

Construction and Design of MPAC Codes

cs.IT ·2026-08-22 ·Fangbo Yi, Zuoxin Cai, Zhongjun Yang, Li Chen, Huazi Zhang +2 more
similarity 0.62
Abstract · This paper has submitted to IEEE Transactions on Information Theory

This paper proposes modified polarization-adjusted convolutional (MPAC) codes and their hybrid decoding that achieves an improved performance-complexity tradeoff. For MPAC codes, only a subset of the information bits undergo the convolutional transform. The output is then combined with the remaining information bits for the inner polar transform. Correspondingly, the convolutionally transformed bits are recovered by Fano decoding, while the remaining information bits are recovered by the successive cancellation (SC) decoding, constituting the hybrid Fano-successive cancellation (HFSC) decoding. The MPAC codes are further designed by the coset-wise analysis that characterizes the number of minimum weight codewords (MWCs). It is discovered that a partially convolutional transform can improve the codeword through utilizing the row combinations of the frozen set efficiently. This property enables the MPAC codes to outperform their prototype polarization-adjusted convolutional (PAC) codes and cyclic redundancy check (CRC)-polar codes. Furthermore, MPAC codes can be optimized by reducing the number of MWCs. Our numerical results demonstrate that, with a similar decoding complexity budget, the MPAC codes offer competent decoding performance when compared with PAC codes using Fano decoding and CRC-polar codes using SC list (SCL) decoding.

0.26

Four-Level Quantized Soft Information Aided Hard-Decision Decoder for Product-like Codes

cs.IT ·2026-10-15 ·Xiaowei Wu, Min Qiu, Yueying Zhan, Lei Yang
published similarity 0.61
Abstract · Accepted by IEEE Communications Letters

We propose a novel low-complexity soft-aided hard-decision decoding scheme for product-like codes, termed iterative bounded-distance decoding (iBDD) with graded scaled reliability and bit-flipping (GSRF). This scheme operates on four-level quantized soft information. It incorporates a graded scaled reliability rule to assign decoding confidence to the bounded-distance decoding result, and employs a bit-flipping rule based on bit-level and component-code-level reliability. A selective re-decoding rule is designed to further facilitate the error performance while keeping the number of BDD attempts in reasonably low levels. The decoding parameter design of iBDD-GSRF is investigated for product codes and staircase codes, respectively. Simulation results on both codes verify that iBDD-GSRF achieves a gain of more than 0.4 dB over the conventional iBDD, comparable to several existing unquantized soft-aided decoders.

0.45

Row-Boosted Ensemble Belief Propagation for Short LDPC Codes

cs.IT eess.SP ·2026-08-10 ·Paul Bezner, Felix Krieg, Stephan ten Brink
similarity 0.60
Abstract · 6 pages, 9 figures, submitted to an IEEE conference for possible publication

Belief-propagation (BP) decoding of short and moderate-length low-density parity-check (LDPC) codes is limited by finite-length graph effects: a single decoder trajectory can become trapped or oscillatory even when an alternative trajectory would decode the received word. Existing ensemble-BP decoders create the required diversity through multiple parity-check matrices, automorphisms, modified schedules, subcodes, or altered update rules. We introduce row-boosted ensemble (RBE) decoding as a minimal decoder-side diversity mechanism: all ensemble members share the same parity-check matrix and the same BP kernel, and differ only in a small set of parity-check rows whose outgoing messages are boosted. On the 5G~NR BG1 \((144,96)\) code, RBE with \(32\) members lowers the frame-error rate of BP with \(20\) iterations (BP-20) from \(1.6\times10^{-2}\) to \(1.6\times10^{-3}\) at \(E_\mathrm{b}/N_0=4.0\,\mathrm{dB}\), outperforming saturated-min-sum and affine subcode ensembles of equal size. Increasing the ensemble size yields additional gains, indicating that RBE provides a scalable performance-complexity tradeoff. The gains transfer across 5G~NR block lengths and rates, to non-5G short LDPC codes, and across flooding and layered schedules.

0.43

Generalized Hamming Weights and Subcode Support Weight Distributions of Twisted Reed-Solomon Codes

cs.IT ·2026-10-12 ·Chao Liu, Hao Chen, Dabin Zheng, Yaqi Chen
similarity 0.59
Abstract · 38 pages

In this paper, we determine the generalized Hamming weight hierarchies of two classes of twisted Reed--Solomon (TRS) codes. For TRS codes with one twist, we first determine all possible values of the generalized Hamming weights. We then give a complete characterization of the weight hierarchy in terms of the minimum distance of the dual code. Explicit conditions are derived for the minimum distances of the code and its dual, which make the whole weight hierarchy explicitly computable. As special cases, the obtained results recover several known characterizations for TRS codes to be MDS, NMDS codes, and $s$-gap AMDS codes. For TRS codes with two twists, we similarly determine the complete generalized Hamming weight hierarchy. In this case, the higher generalized Hamming weights are determined by the first two generalized Hamming weights of the dual code, for which explicit rank conditions are also obtained. In addition, we further determine the subcode support weight distributions of this class of single-twist TRS codes. More precisely, for each $1 \le r \le k$, we derive an explicit formula for the number of $r$-dimensional subcodes with a prescribed support size, thereby giving a complete description of the support distribution of subcodes.

0.22

Limits of Weight-Bounded Redundant Checks for Peeling Decoding of Random Regular LDPC Codes

cs.IT ·2026-10-04 ·Jianshen Zhu
similarity 0.59
Abstract

We study peeling decoding on the binary erasure channel when redundant parity checks may be added without restriction in number, but each check is subject to a row-weight constraint. For random simple binary regular low-density parity-check (LDPC) codes, we consider the parity-check matrix formed by all nonzero dual codewords up to a prescribed weight. We show that, throughout an explicit logarithmic row-weight range, this complete family of redundant checks has the same asymptotic normalized-residual threshold as peeling with the original LDPC matrix. In the same range, with probability tending to one over the random code, it still has a linear-size stopping set that is uniquely decodable. Consequently, every parity-check representation whose peeling decoder succeeds on every uniquely decodable erasure pattern must contain checks above this logarithmic scale, and the supports of those heavier checks must collectively contain a linear number of coordinates. Thus row weight remains an asymptotic limitation even when the number and selection of redundant checks are unrestricted.

0.11

Achievability of CSS codes performance limits over Pauli channels under separate ML decoding with bounded graphical complexity

cs.IT quant-ph ·2026-11-02 ·Gulnihal Mercanoglu, Achilleas Anastasopoulos, S. Sandeep Pradhan
similarity 0.59
Abstract · 45 pages, 9 figures

Capacity-approaching quantum error correction faces a fundamental tension: the required parity-check matrices need to become increasingly dense, while practical decoding and syndrome extraction favor sparse, bounded-degree structures. Reconciling these competing requirements remains an important open problem in quantum code design. We construct Calderbank-Shor-Steane (CSS) code ensembles that approach the CSS rate over memoryless Pauli channels under maximum-likelihood decoding while retaining sparse, bounded-degree graphical representations. The construction separates parity-check density from graphical complexity: although capacity-approaching components may require dense parity-check matrices, they are represented by sparse concatenated factor graphs. We first study a construction combining low-density parity-check (LDPC) and low-density generator-matrix (LDGM) component codes and numerically analyze the average weight distributions of the resulting codes. Motivated by these results, we introduce a second construction based on concatenated LDPC and LDGM codes and generalized irregular repeat-accumulate (GIRA) codes. We derive bounds on the average weight distribution of the resulting sum ensemble and use the Miller-Burshtein framework to prove simultaneous reliability of the two CSS decoding components. Consequently, the proposed ensemble achieves rates arbitrarily close to the CSS hashing bound under separate bit- and phase-error correction, while maintaining bounded graphical complexity, thus providing a foundation for future iterative decoders and indirect syndrome-extraction architectures.

0.20