CS Paper Radar

Solvating machine-learning interatomic potentials for solution-phase chemistry

Anton Z. Ni, Joonho Lee

cs.LG physics.chem-ph ·submitted 2026-10-12 18:01 UTC · v1

Abstract

Most machine-learning interatomic potentials (MLIPs) are trained on gas-phase data, which limits their use for chemistry in solution. Here, we introduce AnySolv, a transferable implicit solvation potential that provides solvent-dependent energy and force corrections to existing gas-phase potentials without retraining them. It is trained on 1.4 million solvation energies and forces computed with density functional theory (DFT) and SMD in 36 solvents, spanning charged, open-shell, and transition-state structures. Because solvents are represented by continuous physical descriptors, AnySolv supports 179 solvents, including those absent from training. On external benchmarks, AnySolv reproduces DFT-SMD solvation energies to 2-4 meV mean absolute error at more than three orders of magnitude lower cost, and it matches the accuracy of DFT-SMD against experimental solvation free energies. This enables screening of the mechanisms of 120 nucleophilic aromatic substitution reactions in six phases as well as molecular dynamics simulations that reproduce the experimentally observed solvent-dependent conformational preferences of alanine dipeptide. By providing transferable solvation corrections to existing MLIPs, AnySolv enables scalable simulations of solvent-dependent chemical reactivity and molecular dynamics.

Comment
19 pages, 7 figures, 11 tables

Closest papers

Nearest neighbours by meaning across the whole index.

First-Principles Atomistic Structure and Dynamics of Polyethylene During High-Pressure Radical Polymerization via Machine Learning Force Fields

cs.LG cond-mat.mtrl-scicond-mat.dis-nnphysics.chem-ph ·2026-08-22 ·Bharatha K. Gunawardana, Teresa Shah, Bicha Azizova, Deepa Ranabhat, Yizhi Song +4 more
similarity 0.68
Abstract · 15 pages, 7 figures, and 1 table

Polyethylene (PE) is one of the most commonly used synthetic polymers. While the synthesis and processing protocols for PE are well established, precise experimental assignment of microscopic structures at atomistic resolution (i.e., the position of each atom) remains largely limited to highly crystalline systems. This gap is often addressed via computer simulations using empirical interatomic potentials, which use approximate but efficient descriptions of interatomic interactions to reach the length and time scales needed to describe macromolecules. These empirical potentials typically perform well for bulk and/or collective properties but face challenges with chemical realism for complex systems, e.g., during reactive processes. In this work, we address this challenge by combining the computational efficiency of a deep potential (DP) machine-learning force field and the chemical realism of first-principles van der Waals (vdW) corrected hybrid density functional theory (DFT) enabled by a SeA high-throughput framework. Using this approach, we study the structure and dynamics of PE oligomers and polymers in an ethylene solvent under common high-pressure (supercritical) radical polymerization conditions. We found that the local solvation environment of radical-containing PE oligomers converges for chain lengths greater than (n~6), suggesting extensibility of our oligomer-trained MLFF to significantly longer polymers. We then confirmed the extensibility of these models to long PE chains by characterizing the molecular weight scaling of single-chain structure and dynamics, which showed classic good solvent behavior. Our PE MLFF retained a consistent level of fidelity and stability across a wide range of thermodynamic state points and chain lengths, at full atomistic resolution, therefore paving the way towards first-principles-based polymer structure and property prediction.

0.43

SoLiD26: A First Principles Solid-Liquid Interface Dataset for Machine-learned Interatomic Potentials

cs.LG cond-mat.mtrl-sciphysics.chem-phphysics.comp-ph ·2026-09-23 ·Jonas Busk, Emil J. P. Frost, Yogeshwaran Krishnan, Henrik H. Kristoffersen, August E. G. Mikkelsen +5 more
similarity 0.67
Abstract

Machine-learned interatomic potentials (MLIPs) enable simulations of larger atomistic systems over longer timescales than traditional ab initio methods but require large, diverse training data. Existing datasets lack comprehensive sampling of solid-liquid interfaces, which exhibit complex phenomena such as solvent layering and surface reconstruction critical for energy and catalytic materials. Here, we present SoLiD26, a curated solid-liquid interface dataset of 15.4 million first-principles structures with up to 576 atoms and 15 chemical elements for training and evaluating MLIPs. The structures were compiled from density functional theory (DFT) calculations, with most configurations originating from ab initio molecular dynamics (AIMD) simulations. SoLiD26 includes aqueous coinage metal interfaces, electrode-electrolyte systems, and selected bulk reference structures, calculated with VASP using the PBE functional and D3 dispersion corrections. The application of SoLiD26 for training and evaluating MLIPs is demonstrated with a suite of MACE models on a simple training, validation and test split. This dataset provides a valuable resource for advancing MLIP development targeted at modelling solid-liquid interfaces in electrochemical and catalytic systems.

0.17

EVA-Flow: Learning Shared Chemistry for Unified Environment-Aware Molecular Conformation Generation

cs.LG cs.CE ·2026-10-26 ·Bing Yan, Anuroop Sriram, Zachary Ward Ulissi, Kyunghyun Cho, Ricky T. Q. Chen +1 more
top venue similarity 0.67
Abstract · Accepted at Transactions on Machine Learning Research (TMLR), 2026

Molecular 3D structures underpin simulations of thermodynamics, kinetics, crystallization, and nucleation, making their accurate prediction central to drug discovery and materials design. However, molecular geometry can change dramatically across environments. Existing models either ignore environmental effects or train separate models for each environment. We hypothesize that transfer learning across contexts is possible for conformer generation and that a general model will perform better when training data are limited, as in ligand binding and crystallization. We introduce EVA-Flow, a unified framework for environment-aware molecular conformation generation that learns shared chemical structure and adapts it through environment-conditioned generative modeling. Across vacuum, protein-ligand docking, solvation, and crystal packing, pretraining and cross-environment finetuning provide their largest gains in the three data-scarce settings. Evaluation against multiple reference conformations shows that EVA-Flow covers a broad range of solvation conformations. Analyses of molecules shared across environments support its ability to generate different conformations for the same molecule in different environments.

0.33

DISSOLVR: An Interpretable and Fast Framework for Aqueous and Organic Solubility Prediction

cs.LG physics.chem-ph ·2026-10-01 ·Vansh Ramani, Har Ashish Arora, Dhairya Kuchhal, Sayan Ranu, Tarak Karmakar
top venuesurveybenchmark similarity 0.63
Abstract · 48 pages, 19 tables, 6 figures. Accepted to the 43rd International Conference on Machine Learning (ICML 2026)

High-fidelity solubility prediction is fundamental to pharmaceutical development and environmental partitioning, where accurate modeling must couple molecular structure with thermodynamic behavior across diverse chemical environments. However, recent advancements have been dominated by deep learning architectures that often sacrifice physical interpretability for predictive power. We challenge this trend by showing that state-of-the-art performance does not require such non-transparent architectures. To address this, we introduce DISSOLVR, a transparent framework for molecular solubility prediction. In addition, we perform a comprehensive literature review and a benchmarking study against various methods. We show that DISSOLVR approaches the aleatoric limit of experimental uncertainty and achieves OOD generalization through structural invariance, derived by mapping molecules to physically-grounded descriptors. Then, we present an LLM-assisted post-hoc explanation pipeline that bridges the gap between symbolic model artifacts and chemically grounded narratives. Finally, a comparative benchmark of a survey involving 22 expert chemists reveals that expert evaluators provide deep insights.

0.58

EnSol: an environment-aware graph neural network for molecular solubility prediction

cs.LG cs.AI ·2026-09-17 ·Thao Nguyen, Saman Shafaei, Zhengyi Zhang, Huimin Zhao, Heng Ji
benchmark similarity 0.62
Abstract

Molecular solubility directly affects key aspects of molecular development such as reaction feasibility, formulation performance, separation efficiency, and solvent selection. However, experimental measurement across solutes, solvents, and temperatures remains costly and sparsely sampled. Existing computational models often rely on fixed-solvent assumptions, deterministic formulations, or simplified representations of solute-solvent interactions, limiting their ability to capture complex molecular interactions, continuous temperature effects, and experimental uncertainty. Here, we introduce EnSol, an environment-aware probabilistic framework for molecular solubility prediction. EnSol represents the solute and solvent as molecular graphs and learns separate representations for each before bringing them together through cross-attention to capture solute-solvent interactions. Temperature is incorporated directly into the solvent environment through feature-wise modulation, and a mixture density network predicts full solubility distributions to capture both temperature-dependent behavior and experimental uncertainty. On the independent SolProp and Leeds benchmark datasets, EnSol achieved Spearman correlations of 0.876 and 0.601, respectively, outperforming state-of-the-art solubility prediction models across both benchmarks. Beyond computational benchmarking, experimental validation across chemically diverse solute-solvent pairs showed that EnSol maintained strong predictive performance and supported reliable solvent ranking, achieving a Spearman correlation of 0.715. These results show that EnSol can support reliable solubility prediction and solvent selection across diverse chemical systems while accounting for predictive uncertainty.

0.26

Neural Network Path Optimization for Finding Transition States on a Machine Learned Potential

cs.AI physics.chem-ph ·2026-11-17 ·Kareem Hegazy, Eric C-Y Yuan, Anup Kumar, Dmitriy Morozov, Daniel Barter +3 more
similarity 0.60
Abstract

Transition states govern chemical reaction rates and outcomes, yet locating them remains a central challenge in computational chemistry. Double-ended search methods find transition states given reactant and product structures, but generally rely on discretized path representations developed for density functional theory, where potential energy surface evaluations are expensive. Machine learned interatomic potentials (MLIPs) dramatically reduce this cost and leverage automatic differentiation to access higher-order derivatives efficiently. We introduce Popcornn, a framework to find transition states by optimizing continuous neural network paths atop an MLIP with a parallelized adaptive numerical integrator. This combination eliminates path discretization artifacts, reduces hyperparameter sensitivity, and enables non-local optimization to overcome local features using second-order potential-energy-surface information. Popcornn consistently recovers more correct transition states than standard methods such as nudged elastic band and growing string, across MLIPs on thousands of organic reactions, establishing it as a robust, automation-ready method for high-throughput transition state search. Popcornn's infrastructure is flexible in path objective, integration strategy, and optimization algorithm, making it a practical tool and platform for investigating open questions in MLIP-based path optimization.

0.26

Learning consistent molecular mechanics force fields from first principles

cs.LG physics.chem-phphysics.comp-ph ·2026-10-06 ·Berkay Günes, Leif Seute, Jigyasa Nigam, Frauke Gräter
published similarity 0.60
Abstract · Accepted to the ML4Molecules Workshop at NeurIPS 2026

Classical force fields (FFs) remain the workhorse for large-scale simulations even as machine-learned interatomic potentials (MLIPs) approach ab initio accuracy. They decompose total configuration energies into simple effective interactions whose parameters are traditionally assigned based on atom or bond types, enabling efficient simulations but also limiting their ability to adapt across configurations. Recent machine learning approaches have improved the accuracy and transferability of bonded parameters in these FFs by inferring them as functions of local atomic environments, but still rely on empirical nonbonded parameters for practical simulations. In this work, we introduce a unified approach, \texttt{grappa-fullFF}, which learns both bonded and nonbonded parameters \emph{consistently} and simultaneously from ab initio reference data. By incorporating physically inspired regularization via supervision of the electrostatic potential and an architecture that facilitates charge equilibration, our model recovers accurate electric response properties, achieves state-of-the-art accuracy on geometry optimization benchmarks, and reproduces the conformational sampling of both classical and existing machine-learned FFs, without relying on externally assigned nonbonded parameters.

0.32

Hessian-Informed Conformation Augmentation for Potential Energy Surface Curvature in Machine Learning Interatomic Potentials

cs.LG physics.chem-ph ·2026-09-04 ·Bumju Kwak, Jeonghee Jo
code/data similarity 0.59
Abstract · 51 pages including Supporting Information, with 9 figures and 7 tables in the main text. Code available at https://github.com/fromjade/Hessi…

While machine-learning interatomic potentials (MLIPs) have successfully learned potential energy surfaces (PES) and atomic forces, many practical applications, such as vibrational analysis and transition state search, rely heavily on the PES Hessian. Yet standard MLIPs are trained on energy and forces only, and using the Hessian as an additional training objective requires backpropagation whose memory cost grows quadratically with the number of atoms. To address these limitations, we propose two Hessian-derived data augmentation schemes: isotropic Gaussian displacement (\textbf{UniAug}) and normal mode-weighted displacement (\textbf{ModeAug}). Both methods utilize simple Taylor expansions, generating physically grounded molecular structures with highly accurate energy and force labels. By preserving the underlying MLIP architecture and training procedure, this approach contributes to improving energy and force predictions in various benchmarks. Comprehensive evaluations across non-equilibrium and equilibrium datasets demonstrate that our approach enhances model accuracy where reference forces are large and training data are limited.

0.49