CS Paper Radar

MIRRA: Fast, High-Fidelity Molecular Generation with Chemistry-Informed Discrete Flow Matching

Ge Sun, Juan J. de Pablo

cs.LG physics.chem-phphysics.comp-ph ·submitted 2026-10-12 18:10 UTC · v1

Abstract

Fast, high-fidelity molecular generation requires accurate chemical choices and efficient sampling. Chemical building blocks reduce graph size, but make each node a choice among tens of thousands of related identities. We introduce MIRRA (Molecular Identity Representation, Refresh and Assembly), a discrete flow-matching generator that learns from chemical knowledge and evaluates identity probabilities only when needed, while keeping every identity in its vocabulary available. Chemical features share information across related blocks, and learned identity corrections distinguish them in molecular context. By deciding which positions will refresh before computing their probabilities, the sampler avoids unused predictions while preserving each sampling transition. Against the strongest baselines in each task, MIRRA reduces chemical and graph distribution errors on ZINC250k by 29-31% and 53-60%, respectively, with generation up to 8.6 times faster. Property targeting yields an estimated 7.8-20.8 times more distinct novel hits per second. On a held-out polymer test set, MIRRA achieves 100% periodic validity with known chain topology, versus 57.0% for a polymer variational autoencoder. These results demonstrate fast, high-fidelity generation with the full chemical vocabulary available throughout sampling.

Closest papers

Nearest neighbours by meaning across the whole index.

Molecular representation shapes the balance between target fidelity and exploration in flow based polymer generation

cs.LG physics.chem-phcond-mat.mtrl-sci ·2026-09-10 ·Tianren Zhang
similarity 0.72
Abstract

Designing polymers with targeted properties requires navigating vast chemical spaces from limited labeled data. Here we introduce PolyLatentFlow, a framework based on continuous-time flow matching in latent space for unconditional and conditional polymer generation, together with LlamaUni, a multimodal representation combining polymer sequence and 3D structural information. In unconditional generation, PolyLatentFlow with LlamaUni produced the largest yield of valid candidates novel relative to PolyInfo among the evaluated unconditional generators while maintaining high diversity. For $T_g$ conditioning, generated property distributions shifted systematically across a 200 °C target range. In multi-property tasks, molecular representations showed similar surrogate target fidelity but differed markedly in validity, training-set replay, and structural proximity to labeled polymers. PolyLatentFlow with LlamaUni consistently combined high validity with low replay and achieved the largest per-attempt yield of nonreplayed target hits for CO$_2$/N$_2$ conditioning. These results demonstrate latent space flow matching for polymer inverse design and identify molecular representation as a key determinant of target control and exploration beyond labeled chemistry.

0.08

Navigating Route Latent Space for Synthesizable Molecular Design

cs.AI cs.CE ·2026-10-06 ·Tao Li, Tuan Vinh, Monika Raj, Yuan Fang, Zhichun Guo +1 more
position similarity 0.69
Abstract

Goal-directed molecular design has advanced rapidly, yet a substantial proportion of designed molecules remain difficult to synthesize in practice, limiting their real-world utility. Prior synthesizability-aware methods either project generated molecules back to synthesizable analogs that deviate from the intended target, or optimize directly in discrete synthesis spaces that lack a continuous landscape for efficient search. We argue that this limitation mainly comes from the search space rather than the optimizer. To address this, we propose RouteFlow, a framework that reformulates synthesizable molecular design as a search over a continuous route latent space, where each latent maps back to a complete synthesis route and synthesizability is inherently preserved. To navigate this space, we adopt reward-guided flow matching as an efficient sampler that steers toward high-property regions. Since reward optimization may push latents off the manifold of real synthesis routes, where decoding becomes unreliable, we further introduce a cycle-consistency mechanism to stabilize fine-tuning. Across 16 optimization tasks from Therapeutic Data Commons, RouteFlow achieves the best sample efficiency among synthesizability-aware baselines, with the best synthetic accessibility and the highest retrosynthesis success rate. Our results also confirm that the proposed cycle-consistency reliably keeps optimization on-manifold while improving target properties, supporting effective synthesizable molecular discovery.

0.17

Latent Flow Matching for Molecular Graph Generation

cs.LG cs.AI ·2026-10-05 ·Mathis Goupillon, Roman Bresson, Konstantinos Divriotis, Michalis Vazirgiannis
similarity 0.68
Abstract

Modern graph generative models typically operate directly in the discrete graph space, explicitly generating node and edge variables, which can become costly as graphs grow. In this paper, we perform generation explicitly on latent representations of entire graphs obtained from a pretrained Variational Autoencoder with high reconstruction fidelity. The generated representations, obtained through flow matching, are then decoded only at the final step. Across molecular benchmarks of increasing size, our approach achieves strong validity and FCD while offering a favorable quality-efficiency trade-off compared with state-of-the-art explicit graph generative models. One of the main advantages of this formulation is that the graph representation only needs to be learned once, after which the same one can be reused across multiple generative objectives without retraining. We demonstrate generation guided by molecular properties and further introduce validity-aware generation though a classifier learned directly in latent space. All code will be made available upon acceptance.

0.21

Evolutionary One-Step Generators: Fast and Diverse Sampling for Discrete Design

cs.LG cs.NE ·2026-10-06 ·Marcus Vukojevic, Erik Nielsen, Veronica Lachi, Andrea Passerini, Giovanni Iacca
similarity 0.67
Abstract

Several discrete design tasks, such as molecular discovery, require diverse collections of useful candidates at low computational cost. High validity alone does not guarantee a useful candidate library: repeatedly generating the same valid structures leaves few distinct alternatives. Training for both feasibility and diversity is challenging because many relevant criteria can only be evaluated after hard decoding. To address this challenge, we propose EGO (Evolutionary Generators with One-step inference), a framework for training compact generators directly on discrete outputs. The method combines distribution matching with structural constraints and optional diversity or history-dependent rewards, using antithetic low-rank evolution strategies without requiring criterion-specific differentiable surrogates. Once trained, the generator produces the entire graph in a single neural-network evaluation. On molecular generation benchmarks, our compact generator achieves over $50\times$ the valid-and-unique yield per estimated dense operation compared to recent one-step flow-map baselines while retaining high chemical validity. In scaffold completion, EGO achieves an observed $44.3\times$ speedup over MoLeR in generation to SMILES and produces approximately $10\times$ as many filter-passing proposals within matched time budgets for generation and screening. Beyond chemistry, EGO produces $1.54\times$ as many distinct held-out elite architectures as relaxed gradient training on NAS-Bench-101. The low generation cost may enable real-time candidate generation across discrete design tasks, supporting interactive exploration of constrained design spaces and rapid construction of candidate sets for downstream evaluation.

0.22

Language-Informed Flow Matching for Trend-Guided Structure-Based 3D Molecular Generation

cs.LG ·2026-08-31 ·Tianyu Gao, Zhikai Su, Jiashu Li, Wenjun Gao, Zichuan Ying +3 more
top venuecode/data similarity 0.66
Abstract · Accepted at Findings of EMNLP 2026

Structure-based drug design (SBDD) requires ligands that satisfy both 3D target affinity and 1D chemical validity. Existing controllable generation methods often rely on task-specific fine-tuning or externally imposed sampling-time guidance, adding cost and potentially conflicting with evolving 3D geometric constraints. We propose LiFT, a language-informed cross-modal framework built on Flow Matching for trend-guided 3D molecular generation across both de novo design and scaffold hopping. LiFT uses a "Sense-Evolve-Assemble" agent to generate target-aware SMILES as intermediate chemical conditions, from which a pre-trained chemical foundation model extracts continuous semantic priors. These priors are integrated into geometric generation through a lightweight semantic projector with zero-initialized adaptive normalization for stable cross-modal conditioning. We further introduce a Self-Conditioned Decoupled Router (SCDR), which modulates the velocity field according to intermediate structural states during ODE integration. Experiments on Cross-Docked2020 show that LiFT achieves competitive distribution matching while improving medicinal chemistry metrics and maintaining competitive structural validity under task-steering settings without additional generator fine-tuning. Our results suggest that language-derived chemical priors provide effective trend-level guidance for 3D molecular generation. Code and released artifacts are available at https://github.com/kasurl/LiFT.

0.58

Packora: Systematic Design for Generative Molecular Crystal Structure Prediction

cs.LG cond-mat.mtrl-sci ·2026-08-27 ·Nayoung Kim, Kiyoung Seong, Sungsoo Ahn
similarity 0.65
Abstract · 37 pages, 21 figures

Molecular crystal structure prediction (CSP) is important in pharmaceuticals, agrochemicals, and organic electronics, where subtle differences in molecular conformation and packing can strongly affect material properties. We present Packora, a flow-based generative model for molecular CSP that jointly predicts atomic coordinates and the lattice from molecular graphs. Packora supports multi-component and organometallic crystals and can condition on any subset of molecular conformers, stereochemical labels, and space-group information within a single model. Inspired by the CCDC CSP blind test, we evaluate generation and ranking separately, using generation to isolate generator quality and ranking to measure end-to-end performance under a common relaxation and ranking pipeline. We also systematically study architecture, training, conditioning, inference, and scaling, identifying an effective design based on cacheable pairwise reasoning, training objective and numerical solver choices, conditioning dropout, and balanced scaling of pairwise and single representations. Packora outperforms the baselines on both structure generation and ranking benchmarks, achieving the best matched-budget coverage across all six generation benchmarks, as well as higher experimental-form recovery, lower experimental-form ranks, and faster convergence in ranking.

0.16

Fixed-Dimensional Latent Flow for Generating Variable-Size 3D Molecules

cs.LG physics.chem-phq-bio.QM ·2026-09-08 ·Weichi Yao, Cameron Gruich, Bryan R. Goldsmith, Yixin Wang
similarity 0.64
Abstract

Molecular size is intrinsically linked to composition, structure, and properties, but most 3D molecular generators treat size as a predefined input rather than a quantity to be generated. We introduce Equivariant-Free Transformer-Autoencoded Latent Flow Matching, a two-stage framework that samples a fixed-dimensional latent vector using flow matching and employs an autoregressive Transformer to determine molecular size, atom types, coordinates, and chemical attributes. Canonical atom ordering and rigid-pose alignment enable Transformers without equivariant layers, while decoded attributes guide bond reconstruction. On PCQM4Mv2, unconditional generation yields 87.9\% unique and novel molecules passing sanitization and PoseBusters checks, exceeding baselines with lower end-to-end training and sampling time and higher end-to-end throughput. Across ten target HOMO-LUMO gaps, internal ranking retains 30\% of the screened candidates and increases the density functional theory-verified hit rate within 0.1 eV of the target from 25.0\% to 52.4\%, while largely preserving novelty and diversity. These results demonstrate fixed-dimensional latent generation with autoregressive decoding as a practical approach to molecular design without prespecifying size.

0.50

GEMS: Molecular Structure Elucidation as Learned Search over Isomer Graphs

cs.AI ·2026-10-16 ·Utku Umur Acikalin, Yingheng Wang, Goncalo J. Gouveia, Tyler J. Schwertfeger, Frank C. Schroeder +1 more
similarity 0.64
Abstract · 36 pages, 9 figures, 17 tables

Identifying small-molecule structures from molecular formulas and tandem mass spectra remains a bottleneck in untargeted metabolomics and natural-product discovery. Even when database retrieval or de novo prediction misses the exact structure, the resulting candidates can provide starting points for exploring nearby structures through a few bond edits. We introduce GEMS (Guided Editing of Molecular Structures), which refines candidates through learned 2-switch bond edits that preserve the molecular formula and each atom's total valence. GEMS uses MIST, a pretrained spectrum-to-fingerprint model, to predict fingerprint probabilities once per spectrum. A neural policy compares each candidate's fingerprint with these predictions, links present features to the atoms and bonds that generate them, and scores all valid edits in one forward pass. The policy is trained on shortest edit paths between structures, so it can be pretrained on PubChem isomers without spectra and then fine-tuned with spectrum-predicted fingerprints. At inference, GEMS searches from multiple initial candidates matching the supplied molecular formula and ranks candidates by fingerprint agreement and multi-start consensus. With the target structure excluded from PubChem initialization, three edit rounds achieve Hit@1/Hit@10 of 29.64%/50.81% on NPLIB1 and 30.22%/41.33% on MassSpecGym, exceeding published baselines under comparable settings. On NPLIB1, GEMS achieves higher identification accuracy in about 3.3 minutes end to end, compared with 26.2 hours for our FRIGID run. GEMS also improves identification from generated candidates, including those refined by FRIGID. Experiments with exact target fingerprints identify fingerprint prediction error as a bottleneck in target recovery and final ranking. Deeper search recovers additional targets without retraining, with larger gains from weaker initial candidates.

0.27