CS Paper Radar

Space-Time Parallel Direct Numerical Simulation of Rayleigh-Bénard Convection

Thomas Saupe, Thibaut Lunet, Mathis Bode, Robert Speck, Sebastian Götschel, Daniel Ruprecht

cs.DC math.NAphysics.flu-dyn ·submitted 2026-10-13 08:27 UTC · v1

Abstract

Rayleigh-Bénard convection (RBC) is a model for turbulent flow and challenging to simulate by direct numerical simulation (DNS). Adequate resolution of all relevant length scales requires very fine grids in space and stability restrictions can dictate small step sizes. In this paper, we investigate the use of parallel spectral deferred correction (SDC) as a high-order time-stepping method to reduce wall-clock times of direct numerical simulation of RBC. Performance results on JUSUF (CPUs) and JUPITER (GPUs) with two different codes show parallel SDC can offer some concurrency along the temporal axis plus larger maximum stable time steps. Taken together, this allows for a reduction of wall-clock time required for simulations over one free-fall time by having to compute fewer steps and being able to mitigate the higher cost per time step through temporal parallelization.

Closest papers

Nearest neighbours by meaning across the whole index.

Adaptive Parallel-in-Time Integration with Dynamic Resource Management

cs.CE ·2026-09-21 ·Keerthi Gaddameedi, Dominik Huber, Martin Schreiber, Hans-Joachim Bungartz, Valentina Schüller +2 more
similarity 0.60
Abstract

As computational resources continue to grow, the strong-scaling limitations of spatial parallelism motivate the pursuit of additional concurrency in the temporal dimension, particularly for applications with hard time constraints, such as weather and climate simulations. The Parallel Full Approximation Scheme in Space and Time (PFASST) is a parallel-in-time method based on Spectral Deferred Corrections (SDC). It computes multiple timesteps concurrently by coupling fine- and coarse-grid SDC sweeps using multigrid Full Approximation Scheme (FAS) corrections. However, PFASST's convergence is often problem-dependent, demanding a variable number of parallel timesteps and, hence, computing resources at different times throughout the simulation. Dynamic Resource Management (DRM) provides a remedy for this challenge by enabling the adaptive adjustment of computational resources and algorithmic parameters at runtime. In this work, we present our novel approach to extending PFASST with DRM, which enables (a) dynamic adaptation of computing resources, (b) adaptive selection of the number of PFASST iterations based on local convergence behavior, and (c) coupling of these two adaptations into a single resizing strategy. With this approach, we demonstrate for the first time that optimal configurations can be identified in real time for each application, rather than relying on static allocation. Furthermore, we show that convergence-informed tuning of PFASST improves resource utilization and convergence efficiency.

0.28

Mixed-precision GPU algorithms for efficient turbulent flow simulations with Raviart-Thomas finite elements

cs.MS physics.flu-dynmath.NA ·2026-09-17 ·Ivan Prusak, Enes Mustafa Soydan, Ivan Pribec, Martin Kronbichler
similarity 0.60
Abstract · 19 pages, 9 figures, 5 tables

We propose GPU algorithms for high-fidelity simulation of incompressible turbulent flows. Discretization in space is performed with H(div)-conforming high-order Raviart-Thomas finite elements for the velocity and an $L^2$-conforming discontinuous Galerkin approximation for the pressure. In time, a consistent splitting scheme based on higher-order BDF time stepping is used, with convection treated explicitly. In this scheme, a pressure Poisson equation and a symmetric reaction-diffusion-type equation for the velocity need to be solved in each time step. We develop a solution framework with fast matrix-free operator evaluation for all ingredients, combined with multigrid solvers for the Poisson problem, and propose a robust mixed-precision algorithmic framework. A key to mixed-precision efficiency is a least-squares projection to generate accurate initial guesses for the iterative linear solvers, enabling us to work with relative residual tolerances of $10^{-3}$. In this regime, running the solvers entirely in single precision leads to almost no change in overall iteration counts and maintains the crucial turbulence statistics, while showing up to $1.7\times$ speedup over pure double-precision simulations.

0.53

Mixed-Precision SEM-Based CFD Simulations on GPUs: A Taylor-Green Vortex case

cs.DC cs.SE ·2026-08-25 ·Yanxiang Chen, Manuel Münsch, Roman Iakymchuk
similarity 0.58
Abstract

Mixed precision is a promising approach for reducing the computational cost and energy consumption of Computation Fluid Dynamics (CFD) simulations, but its effectiveness depends strongly on where precision is reduced within the full simulation pipeline. In this work, we study Taylor-Green vortex case using Neko, a matrix-free CFD solver based on the spectral element method (SEM). Profiling shows that the fluid time step is not dominated by Krylov convergence alone: the velocity and pressure solvers require only a small number of iterations per step, while a substantial fraction of runtime is spent in other SEM operators and solver components. Motivated by this structure, we propose a three-level hierarchical mixed-precision control model. Two groups of configurations are evaluated in environments bounded by 64-bit floating-point (fp64) and 32-bit floating-point (fp32) precision, respectively. The fp64-bounded group identifies accuracy sensitive components and shows that SEM-focused fp32 computation is a promising direction for future optimization. The fp32-bounded group provides the main practical benefit. For the high Reynolds number case studied, selected configurations reduce both time- and energy-to-solution by about 34% relative to the fp64 baseline, while improving robustness compared with global fp32. Targeted fp16 kernel overrides are also explored, showing potential for selected operations but increased sensitivity in gradient-based quantities such as enstrophy. Overall, these results indicate that mixed-precision for matrix-free SEM-based CFD should be treated as a simulation-level control problem rather than solely as a Krylov-solver optimization.

0.26

Are implicit schemes needed in adaptive time stepping for PDEs?

cs.CE math.NAphysics.comp-ph ·2026-10-10 ·Mikhail A. Botchev
similarity 0.57
Abstract · 17 pages, 6 figures, 2 tables

Implicit time integration is the standard way to overcome the tight CFL time step restriction when solving nonstationary PDEs numerically. However, within an adaptive time accurate integration, the time step size selection is governed not only by stability but also by accuracy requirements. Therefore, an eligible question to ask is: is (unconditionally) stable implicit time stepping really needed if the time step is restricted by accuracy considerations anyway? And how much do we then lose (in terms of the time step size) when switching from the expensive implicit time stepping to stabilized explicit schemes? An answer to this question is also important because such a switch is often done when solving large scale nonstationary PDEs on massively parallel computers. This paper attempts to answer these questions by numerical tests for two particular adaptive time accurate settings: (i)~nonstationary convection-diffusion equations and (ii)~nonlinear heat equations.

0.31

TERRA-NG v1.0: Extreme-Scale, GPU-accelerated Mantle Convection

cs.CE ·2026-09-18 ·Fabian Böhm, Nils Kohl, Ponsuganth Ilangovan, Gabriel Robl, Fatemeh Rezaei +5 more
benchmark similarity 0.55
Abstract

We present TERRA-NG, a portable, GPU-accelerated, matrix-free mantle-convection code. A single Kokkos C++ implementation runs at scale on NVIDIA, AMD, and Intel GPU supercomputers. TERRA-NG has a deliberately narrow design: built on a radially extruded mesh of spherical wedges, tailored to the spherical shell geometry, which enables domain-specific optimizations like single quadrature-point integral-evaluations, radial coordinate storage compression and radial shared-memory tiling. The corresponding low-order $W_1$-iso-$W_2/W_1$ wedge-based Stokes--energy discretisation is verified against the Zhong et al.(2008) spherical-shell convection benchmark suite. We showcase TERRA-NG through strong- and weak-scaling on the JUWELS Booster (NVIDIA A100), MareNostrum 5 (NVIDIA H100), LUMI-G (AMD MI250X), Hunter (AMD MI300A APU), and SuperMUC-NG Phase 2 (Intel PVC) supercomputers. Coupled mantle convection simulations at $\sim\!11$ km and $\sim\!5.6$ km radial spacing ($\sim 2.8$ B and $\sim 22$ B DoFs) can be run routinely on standard node partitions of all considered systems. Global $\sim\!1$ km-per-gridpoint mantle convection ($\sim 1.4$ T DoFs) is feasible on an extreme-scale allocation, and a sub-km hero-run at $\sim\!0.7$ km grid spacing scaling up to $\sim 11,000$ GPUs of LUMI-G ($\sim 11$ T DoFs) shows the potential of the code on future, larger machines.

0.52

What Bloats Your Floats? Right-Sizing Numerical Precision for Scientific Computing

cs.DC ·2026-10-06 ·Pratyai Mazumder, Alexandru Calotoiu, Marcin Copik, Yakup Koray Budanaz, Shriram Chandran +1 more
published similarity 0.53
Abstract · Accepted at SC '26: The International Conference for High Performance Computing, Networking, Storage, and Analysis, November 15-20, 2026, Ch…

While FP64 (binary64) remains the standard representation of real numbers in scientific computing, hardware trends increasingly favor low-precision formats optimized for AI workloads. This shift prioritizes throughput and energy efficiency over full-precision capabilities. We challenge the necessity of high-precision arithmetic in PDE-governed simulations, where spatial and temporal discretization errors introduce a physical noise floor that masks the lower-order bits of the FP64 format, rendering them irrelevant. We propose a criterion based on the Signal-to-Noise Ratio (SNR) with respect to spatial and temporal refinements to evaluate the impact of safe precision reduction on scientific computations. Finally, we present an automated dataflow-centric workflow for targeted lowering within mixed-precision subgraphs in complex scientific applications. Large-scale evaluations of weather and climate applications show that strategic precision reduction on GPUs achieves up to 1.8x speedup without compromising physical fidelity.

0.36

TokaGLINT: A Scalable GPU-Tailored Implicit Solver for Full 3D Tokamak Electromagnetic Simulations

cs.DC ·2026-09-18 ·Zifan Yang, Haoyuan Zhang, Jialin Li, Wu Yuan, Xiazhen Liu +3 more
published similarity 0.53
Abstract · Accepted at SC26

We introduce TokaGLINT, a GPU-accelerated implicit solver for electromagnetic field computations in full 3D tokamak simulations, aimed at efficient large-scale parallel GPU computing. Its central innovation lies in the co-design of hierarchical domain decomposition and a fast exact local solver, where hierarchical partitioning is tailored to match fine-grained intra-card subdomains and exploit the tensor-based solver dedicated to curvilinear-coordinate symplectic CN-FDTD-discretized 3D Maxwell equations. Backed by automated operator fusion and batching customized for the intra-card multi-subdomain structure, the solver decouples unknowns through discrete transformations and leverages tensor-structured computations to achieve high hardware utilization, while preserving the long-time stability characteristic of symplectic discretizations. TokaGLINT scales the electromagnetic field solve beyond 10,000 GPUs, achieving 90.1% weak and 53.9% strong scaling efficiency, while delivering a 2.67X single-node speedup over an unpreconditioned BiCGStab baseline (HIP-enabled HYPRE). It is validated in EAST tokamak simulations within the SymPIC plasma simulation code, enabling high-fidelity long-duration modeling.

0.51

Falcons: Pushing the Speed-Ratio Limits of Lossy Compression for Parallel Scientific Applications

cs.DC ·2026-10-30 ·Bing Lu, Jinyang Liu, Xinyang Ma, Quantong Fu, Chenwei Hou +11 more
similarity 0.51
Abstract

The extreme volume of scientific data has become a critical challenge for modern exa-scale scientific computing applications, and error-bounded lossy compression remains indispensable for scientific data management due to its high data reduction rate and controllable data fidelity. However, to ensure sufficient data reduction, existing compressors incur prohibitive computational overheads in real-world parallel scientific computing applications. To overcome the performance bottlenecks of error-bounded lossy compression, we present \textbf{Falcons}, a broadly deployable error-bounded lossy compressor that simultaneously achieves \textbf{high compression ratios with ultra-fast throughput, minimizing the overhead in parallel scientific applications}. Falcons integrates three key designs: memory-regularized interpolation with SIMD (Single Instruction Multiple Data) vectorization, distribution-adaptive lossless coding, and application-oriented optimizations for multiple parallelization schemes. Across our evaluations on cutting-edge supercomputers, Falcons clearly outperforms state-of-the-art compressors, simultaneously achieving up to 29\% compression ratio improvement and 255\% throughput improvement. In case studies of real-world applications, Falcons accelerates large-scale parallel data I/O and remote transfer by up to 44.6\% and 51.5\%, and provides 1.55$\times$ end-to-end speedup for the full WRF (Weather Research \& Forecasting) application workflow.

0.08