CS Paper Radar

Surface Reconstruction from Range Scans Under Visibility Constraints

Gabriel Lenain, Edmond Boyer, Jean Ponce

cs.CV ·submitted 2026-10-13 09:05 UTC · v2

Abstract

Surface reconstruction from range scans is challenging in the presence of noise and outliers, as fidelity to observations must be balanced against sensitivity to measurement errors. Yet, most neural approaches discard the sensor positions and corresponding visibility information, compensating for this loss with geometric priors or regularization terms. We instead formulate surface reconstruction as robust regression of the predicted first surface intersection along each acquisition ray against its measured depth, which penalizes predicted surface intersections within the segment between the sensor and the observed point. We represent the surface as the zero set of a 1-Lipschitz multi-layer perceptron, allowing the use of linearly convergent sphere tracing to compute the first hit, and use a robust Huber loss for regression. Our formulation requires neither oriented normals, sampled off-surface points, nor an eikonal loss. Comparisons with the state of the art on synthetic and real data with varying levels of noise and outlier contamination demonstrate competitive performance on clean data and much improved fidelity and robustness under even moderate corruption. Our analysis further confirms a trade-off between fidelity and robustness: greater fitting capacity improves data fidelity in the clean case but increases sensitivity to the measurement errors inherent in real acquisitions, with a sweet spot typically emerging at intermediate capacity.

Closest papers

Nearest neighbours by meaning across the whole index.

NeuDonatello: Uncertainty-Aware Framework for Accurate Neural SDF Learning

cs.CV ·2026-08-27 ·Alvin Jinsung Choi, Wanhee Kim, Taeyun Kim, Dasol Hong, Wooju Lee +1 more
published similarity 0.66
Abstract · Accepted to BMVC 2026

Neural surface reconstruction has emerged as a powerful paradigm for recovering high-quality 3D surfaces from multi-view images. However, recovering accurate geometry solely from RGB images remains challenging due to uncertainties arising from textureless regions, occlusions, and inherent scene ambiguities. Existing methods often overlook such uncertainties, leading to inaccurate estimates of the signed distance function (SDF). We introduce NeuDonatello, a novel framework that models and leverages SDF uncertainty to improve surface reconstruction. Central to our approach is to model spatially varying uncertainty using a Monte Carlo sampling strategy. Using this uncertainty, we develop an adaptive regularization that selectively strengthens geometric constraints where RGB supervision is unreliable, avoiding incorrect surface reconstruction. We further introduce an uncertainty-aware scale parameter for the SDF-to-density conversion. Conditioned on uncertainty, this design enables more accurate modeling of spatially varying densities. Extensive experiments demonstrate that NeuDonatello achieves state-of-the-art reconstruction accuracy, with robust performance across diverse scenes using only posed RGB images.

0.26

Neural Implicit Energy Optimization for LiDAR Mapping

cs.CV cs.GRcs.LG ·2026-10-20 ·Hrishikesh Viswanath, Md Ashiqur Rahman, Chi Lin, Damon Conover, Aniket Bera
code/data similarity 0.64
Abstract

Neural implicit representations provide memory-efficient signed distance field (SDF) parameterizations for large-scale LiDAR scenes, but the geometry recovered from sparse and often noisy inputs carries jitter and artifacts. Classical geometric optimization techniques resolve such artifacts with surface energy functionals, whose minimizers correspond to smooth surfaces. Motivated by this principle, we formulate neural LiDAR mapping as the optimization of energy functionals over the parameter space of neural implicit representations. Specifically, we regularize the signed distance field with an energy functional defined on the shape operator of its level set, which represents the curvature of the surface, thus encouraging smoothness along the surface. This adapts classical geometric priors to the scale of million-point LiDAR maps. Experiments on large-scale datasets show reconstructions with improved smoothness at preserved geometric fidelity, and no additional inference-time cost. The code is publicly available at \href{https://github.com/HrishikeshVish/nieo}{https://github.com/HrishikeshVish/nieo}

0.30

Reliable iToF Depth Sensing via Sensor-Intrinsic Uncertainty Modeling and State-Space Restoration

cs.CV physics.optics ·2026-08-29 ·Yansong Du, Yutong Deng, Yuting Zhou, Zhancong Xu, Yingjia Lu +5 more
similarity 0.62
Abstract · 11 pages, 7 figures

Indirect time-of-flight (iToF) cameras provide compact and cost-effective dense depth measurements, but their ranging accuracy is often degraded by sensor-intrinsic uncertainty under practical imaging conditions. Spatially uniform or range-only Gaussian perturbations cannot accurately reproduce the range-dependent and signal-dependent noise characteristics of real iToF measurements, leading to a synthetic-to-real gap for learning-based restoration. To address this problem, we propose a joint depth-uncertainty modeling and restoration framework for reliable iToF sensing. A sensor-intrinsic depth-uncertainty model is first developed from calibrated tap responses, returned-signal levels, and sensor noise statistics through a depth-oriented weighted least-squares formulation. The resulting pixel-wise uncertainty is used for heteroscedastic depth synthesis and uncertainty-aware restoration supervision. Based on this heteroscedastic data synthesis, we further develop a U-shaped restoration network with Depth Visual State Space (DVSS) blocks, which combine long-range state-space modeling with convolutional spatial-channel refinement for structure-preserving depth recovery. Experiments on synthetic data and measurements captured by an in-house iToF prototype validate the proposed uncertainty model under varying range and returned-signal conditions. Controlled comparisons with fixed and range-aware Gaussian noise, together with evaluations on U-Net, Restormer, and DVSS, further demonstrate that the proposed synthesis consistently benefits different restoration backbones. The complete framework achieves 40.85~dB PSNR and 2.54 mm MAE on the synthetic test set, and 35.42 dB PSNR and 4.87 mm MAE on real iToF measurements.

0.33

Martine: Benchmarking Multi-View 3D Surface Reconstruction Across Viewpoint Coverage, Resolution, and Lighting

cs.CV ·2026-11-08 ·Robin Bruneau, Baptiste Brument, Frederic Giraud, Bastian Sigrist, Sascha Jecklin +3 more
top venuebenchmarkcode/data similarity 0.62
Abstract · Accepted at the 40th Conference on Neural Information Processing Systems (NeurIPS 2026), Track on Evaluations and Datasets. 23 pages, 14 fig…

Controlled acquisition setups are widely used for high-accuracy multi-view 3D surface reconstruction, as they allow sensor configuration, image resolution, viewpoint distribution, and illumination to be specified. Yet benchmarking remains difficult, since reconstruction accuracy depends jointly on the reconstruction paradigm, object properties, and acquisition regime. Existing benchmarks often restrict viewpoint coverage, resolution, or illumination, which can bias comparisons towards methods suited to the chosen setting. Others lack accurate 3D ground truth or quantified image-to-geometry alignment, limiting their use for metric surface evaluation. We introduce Martine, a benchmark for controlled 3D object surface reconstruction. Martine comprises 28 objects, including transparent materials and fine structures, captured at 9568 x 6376 pixels from 84 views over a spherical cap under both single-light and multi-light regimes. It provides object-independent camera calibration, accurate 3D ground-truth scans, calibration and image-to-geometry accuracy quantified on test images, and 3D property masks for analysing errors by material properties, visibility, curvature and fine structures. Experiments across photogrammetry, classical multi-view stereo, neural implicit surfaces, Gaussian-splatting-based reconstruction, and multi-view photometric stereo show that Martine enables regime-aware evaluation with explicit control over reference-data accuracy. The benchmark resolves sub-millimetric reconstruction differences, with a best observed Chamfer distance of 0.058 mm over the evaluated visible surface.

0.55

Uncertainty-Aware Cortical Surface Reconstruction and Spherical Registration for Heterogeneous Brain MRI

eess.IV cs.CV ·2026-10-12 ·Jesper Duemose Nielsen, Karthik Gopinath, Andrew Hoopes, Adrian Dalca, Axel Thielscher +2 more
similarity 0.62
Abstract

Surface-based cortical analysis is useful in many applications as it is a natural way to model the highly folded structure of the cerebral cortex, allowing quantities such as curvature and thickness to be easily calculated. Existing deep learning (DL) methods have focused on 1x1x1 mm3 T1-weighted (T1w) scans, thus replicating classical pipelines. Here we present a neural network that is trained exclusively on synthetic scans with random contrast and resolution. Consequently, it can be applied to almost any kind of magnetic resonance imaging (MRI) scan. In addition, our model provides vertex-wise uncertainty estimates of the predicted surface as well as a spherical registration to fsaverage space. Our model performs on par with other state-of-the-art DL methods on 1x1x1 mm3 T1w scans and outperforms the only other method capable of estimating cortical surfaces from low resolution, non-T1w scans. The predicted uncertainty, moreover, correlates with overall scan quality on low resolution scans and highlights areas of poor surface reconstruction on 1x1x1 mm3 T1w scans, suggesting that it can be used for quality control. Finally, the predicted spherical registrations prove comparable to other DL and classical registration methods. These qualities, when combined with the fast inference time, will provide the ability to analyze large, existing databases of clinical MRI scans, with the potential for finding disease-specific patterns that would otherwise be infeasible in a research setting.

0.29

Extrapolation Matters: Sparse-Only Depth Completion Beyond LiDAR Coverage

cs.CV ·2026-11-05 ·Maximilian Jansen, Gasser Elazab, Praveen Kulkarni
hot direction similarity 0.61
Abstract

Extrapolation beyond LiDAR coverage is an important yet under-evaluated challenge of depth completion. In real camera--LiDAR systems, partial sensor overlap, occlusions, and limited field coverage often leave large image regions weakly observed or completely unobserved by LiDAR. Thus, we investigate depth completion in this beyond-coverage regime using only sparse supervision from raw single-sweep LiDAR, without dense depth labels, LiDAR accumulation, or pseudo-LiDAR generation. Our approach leverages a frozen monocular depth foundation model, lightweight per-frame alignment to sparse LiDAR geometry, and a refinement module that fuses the aligned prior with sparse LiDAR anchors to predict dense metric depth. To regularize learning under raw sparse supervision, we introduce a high-frequency normal-consistency loss defined as the image-space gradient of the per-pixel normal cosine discrepancy. This term penalizes spatial variation in scalar angular error; it does not directly match changes in neighboring normal vectors. We further introduce an evaluation protocol that explicitly separates LiDAR-supported and beyond-coverage regions, revealing extrapolative behavior that conventional depth-completion metrics can obscure. Our method achieves strong depth accuracy beyond LiDAR coverage while remaining competitive in LiDAR-covered regions, providing a practical way to deploy monocular foundation priors in multi-sensor systems.

0.18

Surfsvr: 2D Surface Priors as 3D Geometric Regularizers for Sparse Voxel Reconstruction

cs.CV ·2026-08-12 ·Yan Di, Chengxi Li, Yaoxing Wang, Mengge Liu, Zhigang Li +5 more
similarity 0.61
Abstract

Sparse voxel reconstruction offers an efficient representation for high-fidelity 3D modeling, yet its geometry is commonly optimized from local photometric evidence and discrete visibility statistics. This often leads to fragmented surfaces, excessive subdivision, and floating artifacts, particularly in weakly textured or sparsely observed regions. We introduce SurfSVR, a novel sparse voxel reconstruction paradigm that treats 2D surface priors as explicit 3D geometric regularizers. Instead of directly lifting noisy pixel-wise depth predictions, SurfSVR first organizes each image into coherent surface regions by jointly reasoning over appearance, monocular depth, normals and cross-view geometry. Each region is then represented by an adaptively selected planar or quadratic surface model based on fitting reliability and geometric complexity, while cross-model agreement distinguishes reliable geometry from ambiguous predictions. These structured 2D priors are lifted into 3D and integrated throughout the reconstruction pipeline. They guide surface-adaptive voxel subdivision, provide region-level depth and normal supervision during optimization, enhance geometrically reliable sparse-observed surfaces in voxel pruning, and suppress off-surface floaters during post-refinement training. This unified design converts semantic and geometric coherence in image space into persistent structural constraints in 3D. Extensive experiments on 3 public benchmarks demonstrate that SurfSVR consistently improves sparse voxel reconstruction across scenes with substantially different visibility and geometry characteristics, achieving state-of-the-art reconstruction quality. Codes and models will be released soon.

0.14

RBF Your SDF: Radial Basis Function Interpolation of Signed Distance Fields with Implied Tangent Points

cs.GR ·2026-09-05 ·Yong Cheng, Yotam Gingold
published similarity 0.60
Abstract · 19 pages

Signed distance fields (SDFs) are a popular implicit representation of geometry. Converting a discrete set of SDF samples into an explicit surface is a fundamental problem in geometry processing. Traditional reconstruction methods such as marching cubes and dual contouring ignore the geometric information carried by samples far from the surface. Recently, Sellán et al.[2023] and several follow-up works leveraged the tangent-sphere structure of SDFs; every sample implies a point on a sphere tangent to the surface. However, these approaches extract the zero-level set via surface reconstruction, which considers only points and normals on the surface and ignores the remaining samples. We propose an approach that marries the tangent-sphere observation with radial basis function interpolation of all data, the implied surface points and the original data. By detecting spheres with extremely constrained tangent points, a configuration geometrically forced at sharp surface features, we identify and preserve surface corners that surface reconstruction-based methods systematically round. A partition-of-unity decomposition allows our method to scale efficiently to large grid resolutions. Our reconstructions improve both Chamfer and Hausdorff accuracy at every tested resolution.

0.33