CS Paper Radar

TALU: A Reconfigurable Tiled-ALU Grid for RISC-V

Ali Emre Oztas, Can Erim Karsal, Mahir Demir, Mikel Luján

cs.AR ·submitted 2026-10-13 22:54 UTC · v1
benchmark

Abstract

Lane-based RISC-V vector processors exploit data parallelism well but pay a recurring cost for two common patterns: reductions, which require a separate tree pass, and deep dependent expression chains, which cannot be fused and are issued as serial vector instructions. We present TALU, a 5-stage RISC-V core whose execute stage is an NxN grid of registered ALU tiles instead of a single ALU. The grid is a reconfigurable, feed-forward spatial fabric: tiles route operands only from non-backward neighbours, and added diagonal forwarding lets a reduction collapse spatially. A minimal custom extension configures the per-tile operation, routing, and per-tile constants, and streams operands through the array. On a single fabric, TALU runs ordinary scalar code, single deep-path expressions, and multi-lane vector kernels. On the benchmark suite of the RISC-V2 vector processor, TALU is 1.8-5.5x faster than RISC-V2 and 4.5-15.5x faster than Vicuna at equal lane count, with a reduction cost (dot÷add) of 1.05x versus 1.96x and 1.26x for the vector cores. A retimed implementation places and routes at 1.03 GHz in 45 nm in 0.30 mm2, half the area of RISC-V2.

Comment
Submitted to the 2027 IEEE International Symposium on Circuits and Systems (ISCAS)

Closest papers

Nearest neighbours by meaning across the whole index.

SPECTRA: Adaptive Execution of Speculative Decoding on a Runtime-Reconfigurable Tiled Architecture

cs.AR cs.AIcs.DC ·2026-09-21 ·Gabriele Tombesi, William Baisi, Je Yang, Elisavet Lydia Alvanaki, Kevin Lee +3 more
published similarity 0.66
Abstract · Accepted at the IEEE/ACM International Conference on Computer-Aided Design (ICCAD 2026)

LLM inference on edge devices is constrained by computational and memory resources, making efficient autoregressive decoding challenging. Speculative decoding alleviates this bottleneck by generating tokens with a smaller draft model and verifying multiple tokens in parallel with a batched target model pass. However, verification introduces a runtime-dependent intermediate regime between memory-bound general matrix-vector (GEMV) operations in decoding and compute-bound general matrix-matrix (GEMM) operations in prefill, as its arithmetic intensity varies with speculation length and acceptance rate. We present SPECTRA, a runtime-reconfigurable tiled architecture that sustains high utilization across the full speculative decoding pipeline. Within each tile, the compute engine switches between systolic execution for GEMMs and vector-lane execution for GEMVs. Across tiles, SPECTRA dynamically adapts computation parallelism by selecting tile count, kernel partitioning, and communication pattern. Both tile-level and system-level reconfiguration operate on a per-kernel basis, enabling efficient execution across these diverse regimes. Evaluated on a 20-tile FPGA prototype across the Pythia, SmolLM2, and GPT-2 families, SPECTRA achieves up to $2.09\times$ speedup from tile-level reconfiguration and a further $1.25\times$ gain from system-level adaptability over fixed designs.

0.54

TileMix: Tile-Centric Mixed-Precision Attention for LLM Inference Acceleration

cs.AI ·2026-08-18 ·Hanzhi Zhang, Qiao Zhang, Qinglei Cao, Heng Fan, Yan Huang +2 more
code/data similarity 0.66
Abstract

Long-context prefill in large language models (LLMs) incurs substantial computation and memory traffic because dense self-attention computes quadratic query-key scores. Existing methods either use a uniform low-precision path or select token interactions, leaving spatial precision routing over hardware-aligned score tiles outside fused dense attention. We introduce TileMix, a tile-centric precision-routing kernel that makes numerical precision an executable spatial decision over score-tile groups within fused dense attention. TileMix partitions the attention matrix into hardware-aligned score tiles, packs routing decisions into compact bitmasks, and dispatches each tile group through FP16 or INT8 score computation while both paths update a shared online-softmax state. Scalable precision grouping lets each routing bit govern multiple adjacent key tiles, preserving hardware-aligned compute tiles and compact metadata at long contexts. By routing all legal tile groups, TileMix preserves dense token connectivity, requires no training, and supports grouped-query attention, variable-length batches, and INT8 key/value caches. Across LongEval, LV-Eval, and A100 prefill benchmarks on LLaMA, Qwen, and Vicuna, TileMix recovers long-context quality lost under uniform INT8 and improves prefill throughput over FP16, yielding a controllable accuracy-efficiency frontier across model families. The implementation is available at https://github.com/HanzhiZhang-Ulrica/TileMix.

0.35

Annotation-Driven Migration of CUDA Programs to Tenstorrent Blackhole

cs.DC ·2026-10-02 ·Ayumi Ohno, Shinya Takamaeda-Yamazaki
similarity 0.64
Abstract · Accepted at the Thirteenth Workshop on Accelerator Programming and Directives (WACCPD 2026)

Tenstorrent Blackhole combines distributed local memories, explicit inter-core communication, and Tensix cores decoupling data movement from computation. CUDA offers a substantial HPC software base but leaves physical data placement and scheduling largely implicit. Migrating CUDA HPC kernels to Blackhole requires spatial mapping across cores and per-core coordination of compute and data-movement kernels. We present an MLIR-based compiler deriving data placement, inter-core communication, and tile computation from a statically shaped affine CUDA subset. Declarative annotations express choices not fixed by the source, including compute/DM operation placement and streaming granularity. We evaluate it on Gaussian elimination, five-point stencil, and symmetric rank-k update. Relative to our compiler's default realizations, the best measured configurations achieve a 4.2x speedup for BF16 Gaussian and 2.1-2.2x for FP32 Gaussian and Jacobi. A choice's performance impact can reverse with surrounding policies, precision, and loop schedule, motivating comparison of alternative per-core realizations rather than independent policy selection.

0.24

RVANNS: Mixed-Precision Indexing and Locality-Aware Graph Traversal on RISC-V

cs.IR ·2026-08-10 ·Chengying Huan, Yudong Liu, Jianguo Wang, Lizheng Chen, Renling Yin +7 more
similarity 0.64
Abstract

Approximate nearest neighbor search (ANNS) on CPUs is increasingly constrained by candidate-vector movement and decoding rather than peak arithmetic throughput. Although the RISC-V Vector Extension (RVV) provides vector-length-agnostic execution and LMUL-based register grouping, generic low-precision decoding still incurs conversion overhead, while irregular graph traversal generates scattered accesses that degrade cache locality and memory-level parallelism. We present RVANNS, an RVV-oriented ANNS engine that jointly optimizes vector representation and graph locality. Its Mixed-Precision Multi-Layer Index (MPMI) represents each vector with a dense 8-bit affine base and sparse FP16/FP32 residuals, fusing reconstruction with distance accumulation and aligning widening with LMUL-sized register groups. ROrder co-locates likely co-visited graph nodes and sorts remapped adjacency lists, transforming scattered payload probes into denser, predominantly forward-moving address streams. Integrated into Milvus, RVANNS achieves 3.39x and 4.94x speedups over scalar execution on real 128-bit and 256-bit RVV processors, respectively. Under controlled HNSW configurations, it improves throughput by 2.27--2.76x over RVV SIMD+FP32 and by 1.18--1.59x over the corresponding AVX-512 and SVE baselines. On Cohere10M, it further delivers 1.82--2.27x higher QPS/W than the evaluated GPU baselines.

0.04

Compiling Semi-Ring Dynamic Programming to Tier-Aware 3D-DRAM Processing-in-Memory

cs.AR ·2026-10-06 ·Mahbod Afarin, Tsung-Han Lu, Tajana Rosing
similarity 0.64
Abstract

Processing-in-Memory (PIM) on monolithic 3D (M3D) DRAM is a promising answer to the memory wall for data-intensive dynamic programming (DP), yet extracting its performance today demands hand-written kernels: the programmer must pick a tile size, place data across non-uniform-latency memory tiers, partition work between heterogeneous processing units, and insert the right broadcasts and queues by hand. We present GenMLIR, an MLIR compiler that automates this mapping for tier-aware 3D PIM. GenMLIR encodes the semi-ring generalized grid update, the algebraic form shared by all-pairs shortest path (APSP) and sequence alignment, as a first-class IR abstraction, and lowers it through four GenDRAM-aware pass groups that derive blocked tiling, tier-aware placement, tile-to-PU assignment, and explicit communication. We also characterize precisely which DP recurrences the abstraction admits and which it does not. On the GenDRAM architecture, GenMLIR-generated code runs up to 5.8 (APSP) and 16.7 (alignment) faster than a lowering without compiler support, and 1.2-1.4 faster than a standard affine-tiling PIM compiler we also implement, reaching 90-100% of an achievable-performance bound. It expresses these workloads in 4-9 lines instead of 300-500 and compiles in a negligible fraction of runtime.

0.22

mKernel: Fast Multi-GPU, Multi-Node Fused Kernels

cs.DC cs.AIcs.LGcs.NI ·2026-09-11 ·Ziming Mao, Yihan Zhang, Shawn Wei Chew, Shuang Ma, Costin Raiciu +3 more
highly cited similarity 0.64
Abstract

Communication has become a bottleneck in distributed training and inference of large models. Overlapping communication with computation at the granularity of kernels, on separate streams, reduces only part of this communication cost. Fused kernels often have better performance by transmitting each output tile as soon as it is produced, but existing fused kernels are largely confined to a single NVLink domain. We present mKernel, a library of multi-GPU, multi-node fused kernels that overlap computation, intra-node NVLink communication, and inter-node RDMA at tile granularity. mKernel partitions the streaming multiprocessors (SMs) of a persistent kernel into compute and communication roles, and an on-GPU controller tunes the SM partition adaptively at run time, since the best SM partition varies with the kernel and the input shape. It structures data movement hierarchically so that data traversing the inter-node network is minimized. Finally, it drives the network from the GPU through a lightweight command queue and host proxy implemented directly on RDMA verbs, which allows the same kernels to run on any network backend (e.g. InfiniBand and on AWS EFA); we observe, surprisingly, that GPUDirect Async (IBGDA) yields little additional benefit over host-assisted GPU-initiated communication. We implement five kernels spanning tensor, sequence, and expert parallelism. On two 16-GPU H200 clusters, mKernel achieves speedups of up to 1.72x on GEMM+AllReduce and $1.88\times$ on Ring Attention.

0.48

Exploring spectral element methods on the Tenstorrent RISC-V accelerator

cs.DC ·2026-08-24 ·Daniyal Arshad, Nick Brown
similarity 0.63
Abstract · Author accepted version of paper to RISC-V for HPC International Workshop at ISC26

The growing availability of commodity RISC-V hardware has sparked interest in its use for High Performance Computing (HPC), with PCIe accelerator cards offering a practical near-term pathway to adoption. The Tenstorrent Wormhole is one example, with dedicated vector and matrix units across 128 Tensix cores, and is widely available. In this paper, we explore porting the AX kernel of Nekbone, a widely used HPC mini-application derived from the Gordon Bell Prize-winning Nek5000 spectral element solver, onto the Wormhole accelerator. This kernel evaluates the Poisson operator, and we describe the mapping of the algorithm onto the Tensix. The initial performance results reveal that the host-side data transposition, required for the z-direction gradient computation, is a severe bottleneck. Consequently, we investigated two optimisation strategies that yield dramatic improvements, achieving 242.97 GFLOPS for 100000 elements across 128 Tensix cores, outperforming a 24-core Xeon Platinum CPU and drawing approximately 7 times less power.

0.54

SyclKittens: A Tile Programming Model for Programmers and Coding Agents on Intel GPUs

cs.DC ·2026-10-03 ·Yehong Jiang, Sheng Chen, Fangwen Fu, Yen-Kuang Chen, Xinmin Tian +2 more
code/data similarity 0.63
Abstract · 46 pages, 11 figures. Code at https://github.com/intel/SyclKittens

New AI accelerators arrive before the kernels that make them fast, because peak kernel performance requires architecture-specific expertise in operand pipelines and data-movement techniques. Coding agents can now write, compile, and tune kernels on their own, so they could greatly accelerate kernel development and optimization. What agents produce depends on the interfaces they are given. These interfaces may expose a machine's raw capabilities or encode the known-good methods for exploiting its hardware features efficiently. We test the performance impact of these two interfaces on Intel GPUs through controlled experiments with three coding models on three kernels. With raw SYCL and execution feedback, Opus 4.8, the strongest of the three models tested, writes a single-GPU GEMM kernel reaching only 57.5% of Intel's tuned oneDNN library. We present SyclKittens, a hardware-aware tile programming model for Intel GPUs that encodes these known-good methods, so its operations place operands in matrix-engine layouts, prefetch through the L1 cache, and communicate over the fabric that links GPU stacks into a node. With SyclKittens under the same agent, task, and feedback budget, the agent reaches 82.1%, showing that encoded methods turn hardware capabilities into performance. Workload-specific policies stay programmable, and engineers and agents jointly refine these schedules in SyclKittens to build a kernel suite that reaches ~96% of oneDNN in geometric mean across GEMM shapes. The suite runs Llama-3.1-8B inference 1.59x faster than torch$.$compile on one GPU and up to 2.91x faster than a matched multi-GPU decode path on Intel's oneCCL. SyclKittens is open source and available at https://github.com/intel/SyclKittens.

0.34