CS Paper Radar

Feed-Forward Multi-View Feature Coding for 3D Gaussian Splatting

Seungmi Choi, Ji-Hyoun Choi, Suhyun Jo, Tae-Gwon Park, Hui Yong Kim

cs.CV ·submitted 2026-10-14 17:58 UTC · v2

Abstract

Feed-forward 3D Gaussian Splatting (3DGS) methods enable efficient reconstruction of 3D scenes from sparse multi-view images in a single forward pass, without scene-specific optimization. However, existing feed-forward scene-coding pipelines follow a "generate-then-compress" framework, first generating a Gaussian representation and then encoding its geometry and appearance through separate coding paths, complicating codec design and limiting the exploitation of cross-attribute redundancy. We propose multi-view feature coding for Gaussian splatting (MFGS), an end-to-end feed-forward framework for scene coding. Instead of compressing an explicit Gaussian representation, MFGS extracts multi-view features from the input images and encodes them into a compact bitstream. Through end-to-end rate-distortion training, MFGS learns a compact latent representation of multi-view features that jointly represents geometry and appearance, enabling the receiver to predict Gaussian attributes from the decoded features. We further introduce importance-guided Gaussian selection to accommodate different rendering budgets, allowing the receiver to adjust the number of Gaussians used for rendering from the same bitstream. Across RE10K, ACID, and DL3DV, MFGS achieves 99.76-99.86% bitrate savings over the generate-then-compress pipeline, as measured by BD-rate, while reducing total GMACs by 52-55% and providing an approximately 12 times end-to-end speedup.

Comment
13 pages. Submitted to IEEE TCSVT. Revised the presentation and appendix, with additional minor changes

Closest papers

Nearest neighbours by meaning across the whole index.

Anchor3DGS: Feed-Forward 3D Gaussian Splatting with Compact Anchor-Based Representation

cs.CV ·2026-10-15 ·Sheng Ye, Jiangke Lin, Fudong Wang, Yi Yuan, Zhen-Hui Dong +1 more
publishedbenchmark similarity 0.81
Abstract · NeurIPS 2026

Recent feed-forward 3D Gaussian Splatting (3DGS) methods have enabled effective multi-view 3D reconstruction by predicting Gaussian primitives in a single forward pass. However, existing approaches predominantly adopt a pixel-aligned paradigm that predicts one Gaussian per input pixel, coupling the Gaussian count to the input resolution and number of views. This also leads to redundant primitives in textureless regions and insufficient coverage in geometrically complex areas. We present Anchor3DGS, a pose-free feed-forward 3DGS framework that replaces pixel-aligned prediction with a compact anchor-based representation. Guided by information entropy, our method places a set of 3D anchors in the scene, concentrating them in regions of higher visual complexity while maintaining broad spatial coverage. Each anchor performs occlusion-aware aggregation of multi-view image features, exchanges information with other anchors, and is decoded into a set of local Gaussians. A lightweight feature enhancement module further refines the coarse RGB output from Gaussian splatting and improves rendering fidelity. Extensive experiments on diverse benchmark datasets demonstrate that our Anchor3DGS achieves state-of-the-art novel view synthesis quality while only using an order of magnitude fewer Gaussian primitives.

0.16

BudSplat: Feed-forward 3D Gaussian Splatting under a Rendering Budget

cs.CV ·2026-10-28 ·Muyu Xu, Fangneng Zhan, Yu Wei, Ling Shao, Shijian Lu
similarity 0.81
Abstract

Feed-forward 3D Gaussian Splatting has recently emerged as a promising alternative to per-scene optimization, enabling fast novel view synthesis by predicting Gaussian primitives directly from input images. However, it quickly faces a bottleneck of rendering efficiency while scaling from sparse to dense multi-view inputs, which offer more geometric constraints but produce a rapidly growing set of candidate Gaussians. Existing solutions cannot reliably distinguish redundant primitives, leading to many redundant primitives from repeatedly observed regions and increased rendering cost without much gain in visual quality. We propose BudSplat, a compact feed-forward 3DGS framework that learns to keep the most valuable Gaussians under a limited primitive count. BudSplat has two novel designs. The first is a detail-aware importance score that is extracted from multi-level visual tokens, providing an explicit cue for regions where pruning is likely to harm perceptual quality. The score can be injected into voxel fusion to preserve high-value local contributors during multi-view aggregation. The second is quality-aware Gaussian pruning that selects a compact set of primitives by jointly considering rendering contribution and detail importance. The quality-aware pruning enables local quota redistribution that helps avoid over-allocating primitives to large redundant regions. Experiments on RE10K, DL3DV, and ACID show that BudSplat achieves a favorable trade-off among rendering quality and efficiency.

0.16

FeCoSplat: Feedback-Guided Compression for Feed-Forward 3D Gaussian Splatting

cs.CV ·2026-09-27 ·Yuxuan Li, Yihang Chen, Yufeng Zhang, Jianfei Cai, Weiyao Lin
similarity 0.80
Abstract

Feed-forward 3D Gaussian Splatting (3DGS) enables efficient novel-view synthesis from sparse multi-view images, yet its representations remain costly to store and transmit. Existing approaches compress either the input images, incurring heavy receiver-side reconstruction, or the reconstructed Gaussian primitives, which are difficult to compress due to their heterogeneous and irregular attributes. We instead compress compact intermediate features, providing a better balance between compression efficiency and receiver-side complexity. Based on this paradigm, we propose FeCoSplat, a feedback-guided compression framework for feed-forward 3DGS. FeCoSplat first compresses multi-view features to obtain an intermediate 3DGS, whose rendered views are used as feedback to guide a second-stage compression for further refinement. The resulting bitstreams are decoded into a compact implicit state, from which the final Gaussian primitives are reconstructed with a lightweight predictor. Experiments demonstrate that FeCoSplat achieves favorable rate--distortion performance, particularly at low bitrates, while requiring only 3.45M parameters for receiver-side Gaussian reconstruction. Code will be released soon.

0.15

FineSplat: Fine Patches, Local Groups, Detailed Splats

cs.CV ·2026-10-18 ·Hyebin Kim, Hwasik Jeong, Joonhyuk Park, Gyeongjin Kang, Jungwoo Kim +2 more
similarity 0.77
Abstract

Feed-forward 3D Gaussian Splatting (3DGS) promises instant scene reconstruction with high-quality novel-view synthesis. Yet, fine-grained geometry and appearance remain difficult to recover, motivating us to revisit how feed-forward models represent, aggregate, and refine detailed visual information. We introduce FineSplat, a feed-forward 3DGS framework built around fine-grained image patches. Since global multi-view attention becomes prohibitively expensive at such high token resolutions, we develop a dual-grouping strategy that combines two complementary forms of locality: view-wise grouping enables efficient interaction among neighboring views, while 3D spatial grouping reconnects geometrically related tokens that may never have interacted under view-wise grouping by lifting them into the 3D scene space. We further leverage reconstruction error as direct feedback, providing an explicit rendering-based signal to recover fine-grained structures and appearance, thereby overcoming the limitations of one-pass feed-forward prediction. Finally, a compact Gaussian generation scheme preserves the benefits of fine-grained features without unnecessarily increasing the number of primitives. Together, these designs enable FineSplat to recover richer geometry and appearance while remaining efficient and compact, achieving state-of-the-art results by a substantial margin, under the same or smaller Gaussian budgets than existing methods.

0.44

GeoGSplat: Geometry-Grounded Non-Pixel-Aligned Gaussian Splatting

cs.CV ·2026-10-27 ·Jiale Wang, Chen Zhao, Haoyang Zhang, Yanhao Wu, Fei He +4 more
code/data similarity 0.77
Abstract

Feed-forward Gaussian Splatting enables efficient novel view synthesis, but pixel-aligned prediction makes the primitive count grow with image resolution and view count, leading to substantial redundancy and increased computational cost. Non-pixel-aligned methods address this limitation by predicting a fixed number of Gaussians. Without explicit ray and depth constraints, these methods yield misplaced Gaussian centers, causing rendering artifacts under large viewpoint changes. To address this issue, we introduce GeoGSplat, a geometry-grounded feed-forward model that explicitly incorporates geometric priors into the non-pixel-aligned framework. A dual-branch encoder constructs Anchors and Triplane to capture coarse 3D structure and fine-grained scene features, respectively. Subsequently, a hierarchical decoder progressively decodes dense 3D points and Gaussian primitives, enabling 3D reconstruction and novel view synthesis. GeoGSplat surpasses both state-of-the-art pixel-aligned and non-pixel-aligned Gaussian Splatting methods on DTU and NRGBD in terms of novel view synthesis and reconstruction. The advantage of our geometry-grounded paradigm further increases as target viewpoints move farther from the input cameras, demonstrating stronger generalization to large viewpoint changes. Project Page: https://comedy0913.github.io/projects/geogsplat

0.27

VS-Splat: Voxel-Selective feed-forward Gaussian Splatting for end-to-end 3D object reconstruction from sparse-views

cs.CV ·2026-09-11 ·Yunsu Jeong, Hyuk Heo, Youngsang Kwak, Jaehwa Kwak, Il Yong Chun
benchmark similarity 0.76
Abstract · Main paper: 10 pages, 4 figures. Appendix: 4 pages, 5 figures, Transaction of Multimedia

Feed-forward Gaussian splatting models have demonstrated remarkable effectiveness in reconstructing three-dimensional (3D) objects from a few two-dimensional (2D) images, even if they are unseen. As existing methods typically predict Gaussian primitives uniformly across the 3D space, most primitives are placed in non-object regions. This may hinder the representation of fine object details. This paper proposes a Voxel-Selective Gaussian Splatting model (VS-Splat), a new end-to-endfeed-forward Gaussian splatting framework that predicts many primitives only within selected voxels that are likely to belong to an object, without 3D structural supervision. To achieve this, we propose a new learnable voxel selection approach that identifies object-centric voxels only with 2D rendering supervision. Our sparse-view rendering experiments with three benchmark datasets show that proposed VS-Splat outperforms several state-of-the-art methods. We further demonstrate its effectiveness as a backbone for an existing densification method and show that anoptional extension improves its robustness to inaccurate camera pose estimates.

0.13

Visual Geometry Foundation-Aware Gaussians for Single-Frame Surround-View Driving Reconstruction

cs.CV ·2026-08-11 ·Junhong Lin, Jinlong Wang, Xianda Guo, Yanlun Peng, Wei Zheng +4 more
benchmarkposition similarity 0.76
Abstract

Single-frame surround-view reconstruction faces severe geometric instability and rendering artifacts due to minimal inter-camera overlap. While existing methods rely on complex decoders or auxiliary cues, they remain bottlenecked by the weak geometric capacity of upstream features. We argue that leveraging pretrained visual geometry priors strengthens upstream representations and alleviates the geometric ambiguity in sparse surround views. To this end, we propose VGGD, a visual geometry foundation-aware 3D Gaussian Splatting framework for feed-forward surround-view driving reconstruction, which shifts geometric modeling to the frontend and adapts foundation priors to the driving camera setting. First, VGGD leverages VGGT to provide transferable multi-view geometric prior tokens. Next, we introduce a Dual-Path Neck to decouple geometry-consistent and appearance-aware representations, improving appearance completion in weakly observed regions. We further apply Scale Warmup to stabilize early geometry learning and suppress scale drift under ego-pose changes. Finally, we use a hybrid pixel--volume Gaussian decoder to produce a renderable 3D Gaussian scene for novel-view synthesis. Experiments on the nuScenes single-frame benchmark show that VGGD achieves the best overall rendering quality among the compared methods and improves relative geometric consistency.

0.04

RLSplat: Resource-Linear Budget Control for Feed-forward 3D Gaussian Splatting

cs.CV cs.AI ·2026-10-20 ·Injae Kim, Minseok Joo, Jihwan Park, Sehyung Kim, Minseong Bae +1 more
code/datacommunity pick similarity 0.76
Abstract · Code available at https://github.com/mlvlab/RLSplat

Feed-forward 3D Gaussian Splatting (FF3DGS) reconstructs 3D scenes from images in a single forward pass, making it well-suited to applications that must operate within limited resource budgets. To further improve its practicality, recent budget-controllable FF3DGS methods allow the number of Gaussians to be adjusted at inference, so that the output meets a given storage limit or rendering-latency constraint. However, these methods overlook the cost of inference itself: to produce a representation with the target number of Gaussians, they first predict a dense set of Gaussians and then prune or select from it, requiring nearly constant latency and peak memory regardless of the budget. We therefore propose RLSplat, a resource-linear budget-controllable FF3DGS framework whose representation size, inference latency, and peak memory all decrease linearly as the Gaussian budget is reduced. Instead of pruning or selection, RLSplat learns a Gaussian allocation policy that distributes the budget across local scene regions, so that exactly the requested number of Gaussians is generated. These Gaussians are then refined through resource-linear Gaussian decoding, in which each Gaussian attends only to nearby Gaussians found via an efficient hierarchical neighbor search, so that the decoding cost decreases linearly with fewer Gaussians. In zero-shot evaluation, RLSplat outperforms prior budget-controllable methods at every budget, surpassing the strongest baseline even with 4$\times$ fewer Gaussians, while running up to 4.1$\times$ faster with 9.6$\times$ less peak memory at low budgets.

0.38