CS Paper Radar

Are You Sure Your LLM Is Sure? Repairing and Auditing Confidence

Arijit Dey, Bhartendu Kumar, Ramya Hebbalaguppe, Khuushi Maheshwari

cs.AI ·submitted 2026-10-15 16:12 UTC · v1

Abstract

Confidence scores determine whether an LLM answer is accepted, reviewed, or regenerated, yet scalar recalibration can only correct errors visible through the score itself. We introduce RADAR (Repair, Adopt, and Diagnose After Recalibration), a reliability framework that separates confidence repair from deciding whether to deploy the repair and auditing the errors that remain. Under squared loss, we decompose prediction risk into outcome noise, information hidden by the score, and mapping error; restricting repair to order-preserving maps additionally introduces a pooling gap. For repair, we propose Probe-Anchored Isotonic Calibration (PAIC), which learns a monotone map from correctness-probe predictions on unlabeled target prompts. PAIC's excess risk depends on the probe's score-conditional bias and fitting error rather than its overall accuracy. For adoption, we derive a paired procedure with finite-sample control of false improvements. For auditing, we develop a prompt-clustered kernel test that detects feature-aligned residual errors while accounting for dependent answers from the same prompt. Across multiple LLM checkpoints, benchmarks, and distribution shifts, richer predictors can improve confidence estimation, but projecting their information back to a scalar score can lose these gains, and lower prediction risk need not yield better review decisions. Across 47,400 replayed raw-score allocations, paired betting adopts candidates with lower held-out test risk in 42.95% of allocations, versus 15.09% for one-sided empirical Bernstein. RADAR thus provides a principled workflow to repair what a scalar score can express, adopt a repair only when supported by evidence, and diagnose systematic errors that recalibration leaves behind. Code and data will be released upon acceptance.

Comment
main paper 10 pages; supplementary 44 pages; 5 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Calibration-Constrained Diagnostics for Evaluating LLM Self-Evaluation

cs.AI ·2026-11-01 ·Jae Oh Woo, Mengdie Flora Wang, Rahul Ghosh, Baishali Chaudhury, Mun Young Kim
publishedcode/data similarity 0.66
Abstract · 38 pages, 7 figures, 17 tables. Extended and substantially revised version of the non-archival NeurIPS 2025 LAW Workshop paper "Can LLMs Rel…

We introduce a reusable evaluation artifact for diagnosing whether LLM self-reported confidence can support confidence-gated act-or-defer decisions. The artifact is designed for evaluation rather than safety certification: it provides a black-box protocol, prompts, judge-reference labels, model outputs, reproduction scripts, and calibration-constrained diagnostic metrics for auditing LLM self-evaluation across math, factual, and commonsense reasoning tasks. Our central finding is that aggregate uncertainty summaries can produce deployment-misleading rankings: a model that appears strongest under standard aggregate calibration metrics can fail under category-level calibration constraints, while a model with worse aggregate calibration can exhibit stronger calibration-constrained behavior in the positive-margin region where high self-selection accuracy and tight calibration coexist. To expose this failure mode, we define PVC and C-PVC as category-level diagnostics over an accuracy-by-calibration surface: PVC counts categories whose self-evaluation accuracy exceeds a threshold, while C-PVC additionally requires category-level calibration error below a tolerance. We aggregate these diagnostics using Volume Under Surface (VUS) and a positive-margin restriction; they are VC/fat-shattering motivated but are empirical evaluation proxies, not literal VC-dimension estimates. Across 13 models and four benchmarks, the artifact shows weak confidence-correctness separation, stable diagnostic rankings under alternative categorizations and judge-label perturbations, and persistent positive-margin failures not captured by ECE or Brier score. Confidence-gated self-evaluation therefore requires calibration-constrained, category-level diagnostics, and we provide a reusable artifact for applying them under black-box access.

0.62

Machine Learning under Imperfect Data: Challenges and Methods

cs.LG ·2026-09-12 ·Masoumeh Zareapoor
benchmark similarity 0.63
Abstract

Machine-learning models are commonly developed under an assumption that training and test data are sufficiently complete, balanced, labelled, and drawn from compatible distributions. In practice, one or more of these conditions is often violated. Measurements may be missing or corrupted, rare classes may be poorly represented, supervision may be weak, and the deployment environment may differ from the training environment. These imperfections are usually treated as separate technical problems, although they alter learning through a small number of shared mechanisms: loss of information, biased empirical risk, ambiguous supervision, and unstable representations. This short survey organises representative methods around these mechanisms. It reviews reconstruction and generation, rebalancing and representation calibration, learning with limited supervision, adaptation across domains and modalities, and reliability under distribution change. The discussion highlights the limits of plausible reconstruction, benchmark-specific correction, and adaptation without trustworthy feedback. It concludes with directions for evidence-aware learning, uncertainty-preserving prediction, and evaluation that separates visual plausibility from decision utility.

0.19

Reliability-Aware Checkpoint Selection for Domain Generalization

cs.LG cs.CV ·2026-09-30 ·Jinshi Liu, Jiahao Li, Pan Liu, Yanfeng Li, Rui Qian +3 more
code/data similarity 0.63
Abstract · 28 pages, 5 figures. Project page: https://github.com/Jjjjjjh666/Reliability-Aware-DG

Checkpoint selection in domain generalization often relies on source-validation accuracy, yet the selected checkpoint need not provide reliable probabilities on unseen target domains. Source-target distribution shifts can alter accuracy rankings, while accuracy alone does not measure predictive probability quality. We identify an empirical selection opportunity within fixed training trajectories: reselecting among checkpoints with near-optimal source accuracy can improve mean target probability quality with small observed changes in mean target accuracy. We study accuracy-constrained reliability selection (AC), which retains checkpoints within a tolerance of the best source-validation accuracy and ranks them by source reliability. Our reference rule aggregates within-set normalized negative log-likelihood (NLL) and class-wise calibration error (CwECE) using $D_\infty$. AC uses no target data and requires neither additional training nor weight averaging. We evaluate five domain generalization training algorithms on three benchmarks, using PACS to develop the objectives and a 0.5-percentage-point tolerance. In exploratory aggregation comparisons on 360 OfficeHome and TerraIncognita runs, the reference rule reduces mean target soft-bin squared-gap ECE and CwECE by 0.240% and 0.182%, respectively, and NLL by 0.030 relative to Source-Acc. Mean target accuracy changes by +0.213 percentage points. These results identify opportunities for reliability-aware reselection, while the additional benefit of joint over single-objective ranking remains unresolved.

0.28

Regime-Conditional Verification: Correctness Estimation for Adapting and Monitoring Safety Classifiers

cs.AI cs.CLcs.CRcs.LG ·2026-08-14 ·Thiago Sandoval, Ufuk Topcu
benchmarkcode/data similarity 0.62
Abstract · 18 pages including technical appendix, 6 figures. Project page and code: https://rcv.tsandoval.com

Safety classifiers deployed with large language models often fail for two reasons: their decisions reflect the policy learned during training rather than the deployer's desired policy, and their performance degrades as deployment traffic evolves. We present Regime-Conditional Verification (RCV), a lightweight wrapper that adapts an off-the-shelf safety classifier without retraining it. RCV estimates, from the classifier's internal representations, the probability that each prediction disagrees with the deployer's policy, and selectively corrects predictions likely to be wrong. The same correctness estimates also provide a label-free signal for detecting distribution shift, enabling a maintenance loop that updates the correctness estimation layer and resorts to classifier fine-tuning only when repair fails within a label budget. Across three off-the-shelf safety classifiers and two benchmark datasets, RCV improves adherence to the deployer's policy in every classifier-dataset combination, catching up to 0.81 of previously missed unsafe content without modifying the underlying classifier. In a deployment study with ten attack campaigns, each a harm category held out of RCV's training, RCV detects every campaign in a dedicated injection panel; in the maintenance census most drift episodes are repaired without updating the classifier, and the fine-tune is reserved for the residual episodes.

0.26

Claim-Level Reliability Assessment for Efficient Test-Time Reasoning

cs.AI cs.CL ·2026-08-12 ·Sen Xu, Wei Wang, Shixi Liu, Jixin Min, Yingwei Dai +3 more
similarity 0.62
Abstract

We propose claim-level falsification as a principle for test-time scaling and instantiate it through Claim-Level Reliability Assessment (CLR), a training-free framework that reallocates test-time compute from additional solution sampling to targeted verification. Since whole-trace evaluation often obscures decisive errors due to signal dilution from routine tokens, CLR condenses each reasoning trace into a compact set of decision-critical claims, thereby isolating its logical anchors. Furthermore, recognizing the inherent difficulty of generating entirely correct solutions under fixed model capabilities, CLR shifts the focus to semantic falsification. This approach exploits a fundamental asymmetry between solution construction and claim refutation. Constructing a valid solution requires a flawless reasoning path, whereas refuting an incorrect claim requires identifying only a single decisive flaw. This targeted search for negative evidence systematically compresses the survival space of high-confidence incorrect traces, effectively suppressing erroneous consensus via nonlinear reliability scoring. Across four LLMs and four reasoning benchmarks under matched budgets, CLR generally improves upon pass@1 and self-consistency. On GPT-OSS-20B/CMIMC25, for instance, CLR exceeds pass@1 by 27.15 percentage-points and raises self-consistency accuracy from 77.50\% to 82.19\% with 37.0\% fewer tokens.

0.34

Experimental Settings in LLM-Based Program Repair: A Study of Inputs, Tool Access, Feedback, and Validation

cs.SE ·2026-09-16 ·Xushu Dai, Yicheng Cai, Nanqing Luo, Pei-Yu Tseng
benchmark similarity 0.62
Abstract · 11 pages, 1 figure, 3 tables

Evaluations of automated program repair (APR) systems commonly report the benchmark, the number of repaired defects, and the tests used for final patch validation, but these items no longer fully specify the repair task presented to a system. Recent LLM-based systems differ in the information supplied before repair, the repository and testing operations permitted during repair, and the feedback returned after unsuccessful attempts, allowing the same benchmark to instantiate substantially different repair tasks ranging from localized patch generation to repository-level diagnosis and iterative repair. We present a framework for explicitly specifying the experimental settings associated with reported APR results. We analyze reported experimental settings from systems evaluated on Defects4J and SWE-bench and characterize each result by its task unit, fault-localization assumptions, initial input, tool access, repair-time feedback, final validation, and resource budget. Our analysis shows that benchmark identity alone is insufficient to reconstruct the evaluated task or determine the appropriate scope of comparison across reported repair rates. We therefore introduce a machine-readable schema for specifying each experimental setting to improve reproducibility and make the scope of cross-system comparisons explicit.

0.19

Why Are LLMs Confidently Wrong? Correcting Overconfident Errors via Causal Head Intervention

cs.AI ·2026-10-26 ·Jing Ren, Bowen Li, Ziqi Xu, Xuechao Yang, Feng Xia
top venue similarity 0.61
Abstract · The paper has been accepted by NeurIPS 2026

Modern large language models (LLMs) often exhibit overconfident errors, assigning high confidence to incorrect predictions and thereby undermining reliability in real-world use. Existing calibration methods typically rely on post-hoc adjustment or retraining, operating at the output level without addressing the underlying causes of miscalibration. We propose CoCHI, (Class-oriented Causal Head Intervention), a framework that improves calibration by identifying and intervening on internal components responsible for distinct confidence behaviours. By analysing predictions through correctness-confidence patterns, CoCHI enables targeted intervention on model internals, reducing overconfident errors while preserving correct predictions. Our approach provides a mechanistic perspective on calibration, linking reliability to identifiable structures within the model rather than treating it as an output-level issue. Experiments across multiple LLMs show consistent improvements in calibration metrics, including Expected Calibration Error, Negative Log-Likelihood, and Brier Score, while maintaining accuracy on five multiple-choice question answering benchmarks. These results suggest that effective calibration requires not only adjusting outputs, but also addressing the underlying causal mechanisms within the model.

0.31

Not Every Correction Helps: Gain-Guided Continual Test-Time Adaptation

cs.CV ·2026-09-29 ·Youjia Zhang, Huiling Liu, Soyun Choi, Jaehong Yoon, Sungeun Hong
similarity 0.61
Abstract

Continual test-time adaptation (CTTA) adapts a source model to an unlabeled test stream whose distribution may change over time. Existing TTA methods often assess prediction reliability using confidence or entropy, which primarily reflect the model's self-certainty for the current sample. In CTTA, accumulated target observations can provide complementary evidence for correcting the source prediction, but this history may become misaligned as the target distribution changes. The key question is therefore not how much the correction differs from the source prediction, but whether and how strongly it should be applied. This paper proposes Gain-Aware INtervention (GAIN), a backpropagation-free CTTA framework guided by a simple principle: history proposes, gain decides. GAIN maintains compact target statistics to form a correction proposal and a posterior-predictive evaluator that accounts for estimation uncertainty. The resulting source-relative gain estimates the proposal's benefit and determines a sample-specific intervention strength along a continuous path through efficient one-dimensional optimization. Gain-controlled predictions then update the target statistics online, limiting the propagation of unreliable corrections, all without backpropagation, sample storage, or replay. Across five benchmarks, our method achieves strong predictive performance, with favorable accuracy--calibration--efficiency trade-offs in continual adaptation. On ImageNet-C, for example, GAIN achieves 61.9% accuracy with near-source calibration. It remains stable under diverse and challenging continual shifts while running 15.9x faster than a representative optimization-based CTTA baseline.

0.33