CS Paper Radar

Repair, Retry, and the Cost of Hindsight: Verifier Feedback in Formal Theorem Proving

Jack Li, Sophia Li

cs.AI ·submitted 2026-10-15 22:03 UTC · v1
publishedtheory

Abstract

Verifier-guided self-repair conditions a model on feedback from failed attempts before it tries again, without weight updates. Yet two findings in prior work are in tension: verifier feedback can improve repair of failures, but self-repair itself can provide little-to-no advantage over independent resampling. We reconcile these findings in Lean theorem proving through controlled one-step experiments that hold the preceding failure fixed while varying whether the failed proof is shown, whether the compiler error corresponds to that failure, and the retry instruction. We test frozen Qwen3.6-27B, a general-purpose model, and DeepSeek-Prover-V2-7B, a specialized prover, on difficult MiniF2F problems. We find two opposing effects. Showing the model its failed predecessor reduces success and sharply increases copying of it, while on Qwen adding that attempt's compiler error recovers the loss, to the level of the diagnostic alone. Replacing the predecessor with another theorem's failed proof largely removes the degradation on both models; on Qwen, replacing the diagnostic with another problem's error substantially reduces the recovery. Without the failed proof, correct diagnostics show no resolved advantage over wrong-diagnostic controls on either model. The failed-proof penalty persists with and without the retry instruction, whereas Qwen's diagnostic recovery is weaker without it. In 11-problem sequential experiments through 64 attempts, Qwen retains a correct-diagnostic benefit within failed-proof histories, while DeepSeek-Prover shows no resolved recovery. However, no tested one-step feedback condition establishes an advantage over instruction-only resampling, nor does 64-attempt sequential repair with failed proofs and correct diagnostics at equal token budgets. Verifier feedback can thus improve repair without overcoming the performance loss from conditioning on a failed attempt.

Comment
NeurIPS 2026 Workshop on AI for Verifiable Coding

Closest papers

Nearest neighbours by meaning across the whole index.

How Stable Are LLM-Generated Proofs Under Program Refactoring? A Stress Test for Verifiable Code Generation

cs.AI cs.LOcs.SE ·2026-10-26 ·Aravind Mandiga, Guoming Li
published similarity 0.71
Abstract · Accepted at the NeurIPS 2026 Workshop on AI for Verifiable Coding

Benchmarks for verifiable code generation usually test a proof against one fixed implementation. We ask whether the same proof remains valid after a program refactoring that preserves behavior. We introduce RefactorProof, which derives 458 Lean-certified variants from the 185 VERINA tasks that compile in our pinned environment while holding the specification and evaluated proof fixed byte-for-byte. VERINA supplies reference proofs for 46 tasks, all from its basic split; the primary model-versus-reference comparisons further match on 21-25 short, non-recursive tasks. Structural refactorings expose substantial brittleness across proof sources: task-normalized structural PSR is 4.3% for the supplied references and 13.3-26.8% for the specialized provers. On the matched tasks, specialized prover proofs nevertheless have higher overall unchanged-proof survival than the supplied reference artifacts: +15.6 points for DeepSeek-Prover-V2-7B, +18.8 for Goedel-Prover-V2-32B, and +20.3 for Goedel-Prover-V2-8B; all three 95% CIs exclude zero. The ordering persists after excluding universally survived T1 variants, under family-balanced aggregation, and under alternative deployable valid-proof selection rules. However, unchanged-proof failure is not the same as high repair cost: predefined one-identifier edits repair 51/54 eligible reference structural failures and 58/85 eligible prover failures. RefactorProof therefore measures unchanged-proof stability under program refactoring, not the cost of maintaining a proof after it breaks.

0.30

Fix, Not Just Resample: Bounded Compiler-Guided Repair in Lean 4

cs.AI ·2026-10-18 ·Haotian Deng, Chris Farber, Sonal Narasimha, Samskrithi Sivakumar, Yexiang Xue
benchmarktheory similarity 0.70
Abstract

Automated theorem provers often rely on sampling language models, but proof assistants like Lean reject each failed step with a precise error message --- information that pure sampling discards. To overcome this, we introduce a bounded, online step-level repair module. Our search samples $K$ candidate tactics at each step and repairs a failed tactic at most $R$ times. Instead of discarding failed tactics, we feed the compiler's error message to a pretrained repair model to fix individual rejected steps in place. This approach improves the solve rate over a sampling-only baseline across all tested candidate budgets ($K \in \{1,3,5,8\}$), achieving up to a $32\%$ relative gain and solving $82$ additional theorems on a $1{,}990$-theorem subset of the LeanDojo benchmark. Repair is not free: it trades extra runtime for reachable proofs. But the trade is predictable: repair pays most when sampling is constrained; its return is front-loaded, with the first repair attempt capturing $84\text{--}96\%$ of the total gain; and the gain comes almost entirely from shallow tactic-execution failures rather than structural errors such as type mismatches. This targeted repair successfully replicates on a second benchmark (Lean Workbook), nearly doubling the solve rate with zero regressions.

0.21

On the Limits of Execution Traces for Repairing Assertion Failures in LLM-Generated Code

cs.SE cs.AI ·2026-11-06 ·Muntasir Adnan, Carlos C. N. Kuhn
position similarity 0.67
Abstract · Under review at 2027 2nd International Conference on Advances in Artificial Intelligence and Machine Learning

Iterative repair returns a failed program's error to a large language model (LLM) and asks it to fix it. After iterative repair, the remaining failures are mostly assertion failures: with four Qwen2.5 models, they make up 79% of residual failures on BigCodeBench, all on HumanEval and 93% on LiveCodeBench. We argue, through an information view of the feedback, that an assertion failure says little about where the fault lies. We propose Breakpoint Debugging (BPD), which returns the failed program annotated inline with its variables' runtime values. We take the tasks that iterative repair failed to fix with five repair attempts and compare two ways of spending five further generations on them: BPD, and resampling. On BigCodeBench, BPD repairs 26.7% of these tasks against 22.4%, and its advantage grows with model size. On HumanEval, BPD outperforms resampling but only slightly, and on LiveCodeBench, fresh sampling repairs more (6.5% against 4.9%). Furthermore, BPD reduces unchanged-code resubmissions from 28% to 8% on BigCodeBench. Using only the first failing test's trace, it outperforms tracing all failing tests while using fewer tokens than both all-trace BPD and plain iterative repair. On LiveCodeBench, BPD gives no gain even on the public tests, so a visible failing input is not enough for a trace to help. These results match the information view: a trace helps only when the test exposes a failing input, and the fault is an implementation slip; otherwise, a repair loop should resample rather than trace.

0.16

Curriculum proof repair with learned counterexamples

cs.PL cs.LG ·2026-11-10 ·Yuechun Sun, Jun Yang, Kexin Pei
top venue similarity 0.64
Abstract · Accepted at NeurIPS 2026. 28 pages

Language models (LMs) have substantially lowered the barrier to applying formal verification for building reliable and secure software. Existing approaches commonly follow the verifier-in-the-loop paradigm, but the verifier often provides only coarse, binary pass/fail feedback, which offers little actionable signal on how the proof should be repaired. Recent work shows that counterexamples provide more actionable feedback by grounding proof failures in concrete program states, but generating useful ones at inference time requires costly iterative refinement. We present TopoVerus, an LM-based framework for Verus proof repair that internalizes counterexample-guided diagnosis as a model capability, producing useful counterexamples in a single pass. Our key insight is to train counterexample generation not as a standalone validation task, but as a data-driven diagnostic objective: a counterexample is useful when conditioning on it helps the model produce a safe, verifier-passing proof. Given a failed Verus proof and verifier error, TopoVerus generates a structured source-level counterexample, repair rationale, and repaired proof in one trajectory, optimized with reinforcement learning from Verus feedback and a proof-code safety gate. To guide the order of invariant repairs, TopoVerus introduces a curriculum with a topological graph reward based on invariant dependencies derived from inductiveness tests, which encourages counterexample generation to follow the same topological order. Across seven Verus benchmarks with 471 problems, TopoVerus achieves 61.6%/72.2% weighted-average Safe-Pass@1/Safe-Pass@3, outperforming the strongest baseline, Claude Sonnet 4.5, by 5.7/6.3 points. We also show that TopoVerus's learned counterexamples can directly augment the reasoning of existing LM-based proof repair approaches, improving their success rate by 64.3% compared to chain-of-thought diagnostics.

0.41

Maestro: Agentic Formal Proof Development by Coordination

cs.LG ·2026-10-19 ·Haoyu Li, Zeren Shui, Yuhao Zhang, Ferhat Erata, Benjamin Mikek +2 more
benchmark similarity 0.64
Abstract

Lean is increasingly used to verify mathematical proofs and software produced by LLM agents, but writing formal proofs remains hard. Existing prover systems take a divide-and-conquer approach that recursively decomposes hard proof goals into easier lemmas and splits again any lemma that resists proof. However, a lemma can resist proof for different reasons, including insufficient guidance, a false statement, or a flaw in the decomposition that produced it. Existing systems cannot tell these apart as a failed attempt reports little beyond its failure, and responses are confined to the failing node without considering the rest of the proof or revising the plan above it. The system may thus keep decomposing obligations along a flawed proof direction until the budget runs out, causing the whole proof attempt to fail. We introduce Maestro, a Lean prover harness that handles failures through global coordination. Provers report why they failed, not just that they failed, and a coordinator that sees the whole proof chooses an appropriate response, such as guiding a stuck prover, correcting a false lemma, or retracting a flawed subtree and replanning it. The same harness extends to verified code synthesis, where a checked counterexample sends the code back for repair. We evaluate Maestro with four frontier LLMs on seven mathematics and three software verification benchmarks. It proves more targets than each model's native coding agent (Claude Code or Codex) on every benchmark the agent has not already saturated, with the largest gains on research-level mathematics. With Claude Opus 5, it discovers its own proofs of 34 of the 48 theorems in the June 2026 release of arXivLean, against 19 for the native agent. It also outperforms all published prover systems on every benchmark they share, solving 669/672 PutnamBench, 59/60 Lean-IMO-Bench, and 6/6 IMO 2026.

0.37

From Errors to Proofs: Minimal-Core-Guided Repair for Neuro-Symbolic Constraint Solving

cs.AI cs.CLcs.LGcs.LO+3 ·2026-08-14 ·Dipankar Sarkar
publishedbenchmark similarity 0.64
Abstract · 7 pages, 2 figures. Accepted at the IJCAI-ECAI 2026 Workshop on Logic and Symbolic Reasoning (LogiSymb), poster

Making language models solve constraint problems reliably often means having them translate the problem into a formal specification and delegating the search to a sound solver. But the translation is itself a language-model task, and an unfaithful translation makes the solver faithfully solve the wrong problem. Existing pipelines repair only translations that crash, returning the solver's error message and falling silent when the program runs but is wrong. We replace the error message with a proof: when the generated program is unsatisfiable, we extract a minimal unsatisfiable core over the model's own constraints and hand it back the exact set that cannot hold together, a leakage-free signal that localizes the fault. On a new benchmark of 77 problems with an exact oracle, translation to Answer Set Programming is faithful on six of seven domains and fails only on aggregate coverage scheduling, which concentrates the translation tax in one diagnosable pattern. A minimal core, rather than a bare error, is what stops a weaker model from fabricating solutions to infeasible problems, cutting fabrication from 79% to 7%. A strong chain-of-thought baseline meanwhile matches the symbolic route on accuracy, so the route's value is not accuracy but certificates and its refusal to fabricate.

0.23

RePro: Proof-Verified Benchmark Rewriting for Reliable Evaluation of LLM Mathematical Problem Solving

cs.CL cs.AI ·2026-08-30 ·Xiyuan Zhou, Zhuoqi Li, Xinlei Wang, Yirui He, Yuhao Wu +4 more
top venuebenchmarktheorycode/data similarity 0.63
Abstract · Accepted to the EMNLP 2026 Main Conference

Data contamination undermines the reliable evaluation of large language models (LLMs) on mathematical problem solving. While rewriting-based evaluation mitigates memorization, existing methods lack guarantees of problem validity and answer correctness. We propose Proof-Verified Benchmark Rewriting (RePro), the first framework to integrate Lean-oriented neural automated theorem provers (ATPs) into benchmark rewriting, which rewrites problems and regenerates answers with correctness ensured by Lean-verified proofs. Experiments on GSM8K and MATH show that RePro's retained rewritten instances achieve 100% well-definedness, feasibility, and answer correctness, while existing methods still produce invalid or incorrect instances. Moreover, several models exhibit accuracy drops on proof-verified rewritten benchmarks, suggesting that their performance is sensitive to surface-level and structural variations and may partly reflect memorization effects. Our source code and data are available at https://github.com/AI4Engi/RePro.

0.50

Solving VeriContest with a Lean-Backed Rust Verifier

cs.LO cs.AIcs.SE ·2026-10-02 ·Traian Serbanuta, Jun Xu, Andrei Stefanescu, Cosmin Radoi
benchmarktheory similarity 0.62
Abstract

VeriContest is a benchmark of 1007 competitive-programming problems in Rust, each with a Verus specification, a judge-accepted solution, and a Verus proof. Its authors report that proof generation is the bottleneck for frontier models: given the specification and the code, the best model produces an accepted Verus proof for 13.95% of the problems on the first attempt. We report on solving the same proof-generation task with Rust-Prover, a verifier for Rust backed by Lean 4. The Verus specification and the Rust code are restated and translated into Lean, each specification becomes a theorem, and agents prove the theorems with Lean's kernel as the final check. All 1325 theorems of all 1007 problems were proved. 1259 of them were proved in one run of under 32 hours on Claude Opus 5.5, at a median of 3.2 minutes and $1.17 per proof, and 70% of them on the first iteration. The restated specifications were checked against the benchmark's test suites, and reviewed where no suite applies. None was wrong or weakened. The translated Lean programs were run on 21,413 of the benchmark's test cases and produced the same output as the Rust programs on every one. Across four Claude and four GPT models at five reasoning-effort settings, every current frontier model proves nearly all of a ten-theorem sample at every setting, and more effort raises the cost without raising the number of proofs. The cheapest Claude setting, Sonnet 5.5 at low effort, proves all of the 50 hardest theorems. We also rerun the benchmark's own Verus protocol with Claude Opus 5.5 on the 50 problems with the longest reference proofs. Opus 5.5 alone fails to prove one of them.

0.30