CS Paper Radar

Shape-Aware Neural Time Fields for Rigid-Body Motion and Manipulation Planning

Yanming Zhou, Yuchen Liu, Ahmed H. Qureshi

cs.RO cs.LG ·submitted 2026-10-16 00:05 UTC · v1

Abstract

Rigid-body motion planning is fundamental to robotic transport and manipulation, where both object position and orientation determine whether a body can move through cluttered environments. This coupling makes planning chal- lenging because translation and rotation can be constrained very differently by surrounding geometry. We propose Shape- Aware Neural Time Fields, a physics-informed neural motion planning framework that learns a reusable travel-time, or cost- to-go, representation for rigid-body motion while explicitly accounting for these distinct geometric restrictions. The learned field captures local motion difficulty in translation and rotation and is paired with a sampling-based planner that balances progress toward the goal with the cost of reaching nearby poses. We evaluate the framework across 2D and 3D rigid- body planning tasks and non-prehensile manipulation through object pushing in diverse environments. Results show substantial improvements in planning success and inference efficiency over physics-informed neural planning baselines, while remaining competitive with classical sampling-based planners at significantly lower planning times. Ablation studies further validate the contributions of both the learned representation and the proposed planning strategy. Finally, closed-loop pushing experiments under execution deviations and external disturbances demonstrate that fast replanning enables reactive and adaptive task execution.

Closest papers

Nearest neighbours by meaning across the whole index.

OATH: Object-Agnostic Tracking for Dexterous Hands, Enabling Rapid Physics-based Retargeting

cs.RO ·2026-10-09 ·Solvin Sigurdson, Prasanna Sriganesh, Juan Borbon, Joel Burdick, Dingqi Zhang +1 more
code/data similarity 0.75
Abstract · 8 pages, 7 figures, 3 tables. Project page: https://multiplylabs.github.io/oath/

Retargeting human demonstrations into dynamically feasible dexterous hand trajectories requires resolving complex contact physics, yet current methods either omit physical constraints or rely on computationally expensive sampling-based optimization in simulation. Reinforcement learning has previously been used to achieve planning and control through contact dynamics; however, standard policies require object-specific training and fail to generalize across arbitrary geometries. This work reframes physics-based retargeting as a residual learning problem, where we demonstrate that zero-shot generalization across objects relies on structured state representations. Specifically, formulating the observation space to include a localized contact-error signal guiding each robot link to its target coordinate on the object surface enables a single, unified residual policy to successfully grasp novel, unseen object geometries. Rolling out this policy in simulation on a kinematic reference trajectory yields a physics-based retargeter, OATH. Operating at 0.4 seconds of compute per second of reference, OATH achieves 2.4x faster-than-real-time performance and a 60-350x reduction in computational cost compared to sampling-based methods. The system recovers 58% of held-out and 54% of unseen-object DexYCB trajectories while maintaining a sub-2 cm tracking error.

0.29

Grasp-TAGS: Task-Aware Grasp Selection via Critic Distillation for Prehensile Loco-Manipulation

cs.RO cs.AIcs.LG ·2026-11-06 ·Xun Tu, Minghao Zou, Karthik Desingh
similarity 0.74
Abstract · 10 pages, 6 figures

Loco-manipulation, which requires mobile manipulators to coordinate locomotion and manipulation over long horizons, is a key capability for large-object rearrangement in applications such as service robotics and warehouse automation. Despite recent progress, reliably executing these tasks remains challenging because performance depends on complex robot-object and object-environment interaction dynamics. Existing approaches address this challenge either through model-based methods, which often require accurate dynamics models, or through learning-based methods, which reduce this requirement but typically assume a fixed or predefined initial grasp. However, different geometrically stable grasps can lead to substantially different downstream manipulation performance. Therefore, we propose Grasp-TAGS, a task-aware grasp selection framework for goal-conditioned large-object rearrangement. We train a unified PPO-based reinforcement learning policy across multiple initial grasp configurations and distill the learned critic into a lightweight grasp utility network that ranks candidate grasps using only the candidate grasp configuration and goal information. At inference time, we select the grasp with the highest predicted downstream utility for the downstream policy to complete the task, before even making a contact. Experiments demonstrate that Grasp-TAGS improves rearrangement success over both fixed single-grasp policies and random grasp selection, achieving an average success rate of 89.84% compared with 79.87% for the best-performing single-grasp policies, an improvement of 9.97 percentage points. Grasp-TAGS also reduces final orientation errors across all evaluated objects. For more qualitative results, refer to the supplementary webpage: https://rpm-lab-umn.github.io/Grasp-TAGS-web-page/

0.17

Representation World Model: Learning States, Transition and Executable Plans in Representation

cs.RO cs.CV ·2026-09-24 ·Yijun Yuan, Weicheng Zheng, Weibang Wang, Minghui Qin, Chang Sun +5 more
similarity 0.73
Abstract · Website: https://tsinghua-mars-lab.github.io/RepresentationWorldModel

We propose the Representation World Model (RWM), which learns states, transitions, and executable plans directly in representation space. Unlike existing world models that typically learn latent representations together with explicit dynamics models and perform planning through search, optimization, or policy-based prediction, RWM directly incorporates planning into the learned representation geometry. RWM learns the representation geometry by applying inverse-dynamics supervision locally along latent paths constructed from endpoint representations, requiring these paths to preserve task-relevant state and transition information. At inference, planning is performed by directly constructing a latent path between the current and goal representations, with inverse dynamics used to recover the corresponding actions, without recursive rollouts or action-space search. Experiments on continuous-control benchmarks demonstrate the effectiveness of RWM for direct planning, while results on robotic manipulation further show its potential to extend to more complex embodied control tasks. These results suggest that planning directly in representation space provides a promising alternative to conventional world-model planning.

0.25

MetaPusher: Meta Learning and Planning for Nonprehensile Manipulation of Unseen Objects with Rapid Online Adaption

cs.RO ·2026-09-17 ·Donghyung Lee, Seyedali Golestaneh, Jaskrit Singh, Zhuoyun Zhong, Athanasios Kapoutsis +1 more
similarity 0.73
Abstract

Manipulating previously unseen objects remains challenging, as their dynamics depend on latent physical properties, such as friction and mass distribution, that cannot be inferred from perception alone. Prior experience across objects can provide an initial estimate of unseen object dynamics, but this estimate remains uncertain and can degrade further during sim-to-real transfer. Adapting the dynamics through interaction can progressively refine the estimation, however, updating the model may invalidate the planned trajectory. Successful and efficient manipulation therefore requires both rapid dynamics adaptation and a planning strategy that can incorporate this evolution. In this work, we introduce MetaPusher, a meta-learning and adaptive planning framework for nonprehensile manipulation of unseen objects without prior object-specific interactions. A meta-learned dynamics model rapidly adapts from interactions during task execution, while an adaptive kinodynamic planner updates long-horizon plans by reusing and refining its existing search tree. This coupling enables manipulation and adaptation without a separate data collection phase. We evaluate MetaPusher on unseen objects in simulation and in sim-to-real scenarios, comparing against fine-tuning and active learning methods, MPPI-based control, and a reinforcement learning policy. It achieves lower prediction error and improves task success rate by up to 20%.

0.25

Whole-Body Dexterity

cs.RO cs.AIcs.LGeess.SY ·2026-10-15 ·Conor Mc Gartoll, An Dang, Pranay Thangeda, Arjun Gupta, Carolina Higuera +3 more
similarity 0.73
Abstract · 20 pages, 13 figures

Current humanoid dexterous manipulation remains largely confined to end-effectors and simple grasps, falling short of humans' ability to engage the entire body by bracing and sliding bulky objects against the arms and torso. We introduce Whole-Body Dexterity (WBD), a general framework that uses the robot's body and appendages as contact surfaces to grasp and manipulate objects. Our sim-to-real pipeline first generates a dataset of feasible whole-body grasps, then trains reinforcement-learning experts on a general any-to-any repositioning objective by sampling initial and goal grasps from the dataset, and distills these experts into a single policy that uses proprioception and object geometry. We show that the distilled policy transfers zero-shot to a real Unitree G1, where it repositions a basketball and a cardboard box to regions around the torso and completes a long-horizon task that stows a box under one arm, carries it from a shelf to a table, and places it. The controller operates interactively, steered by coarse motion references from a human teleoperator. Across real-world whole-body manipulation tasks, the distilled controller completes 90% of trials, compared with 18% for direct retargeting and 4% for a generalist whole-body controller.

0.38

From Prediction to Action: Learning Physical Context for Deformable Linear Object Manipulation

cs.RO ·2026-11-10 ·Chengxiao Dong, Alessio Caporali, Hongyu Lan, Gianluca Palli
similarity 0.73
Abstract · Submitted to ICRA 2027

A representation that accurately predicts a deformable object's response is not necessarily the one most useful for choosing manipulation actions. We study this distinction between predictive utility and decision utility in planar single-grasp shape control of Deformable Linear Objects (DLOs). As a common decision backbone, we introduce Geometry-Pointer-Flow (GPF), a geometry-grounded policy that separates grasp-location selection from grasp-conditioned motion generation. Its geometry-only variant reduces one-step executed shape error by 32.8% relative to a DLO-specific diffusion policy, while using 18.7 times fewer parameters and achieving approximately 193 times faster inference. On this backbone, we compare physical context represented by ground-truth parameters, estimated parameters, and learned interaction-history representations, for both forward prediction and executed control. For prediction, ground-truth physical parameters reduce next-shape error by 15.8% over geometry alone, and estimated parameters are slightly more predictive than interaction history. This ordering does not carry over to control: estimated parameters provide no detectable one-step control gain, whereas history-conditioned GPF reduces executed error by 9.9% relative to geometry-only GPF across 470 paired simulation trials. In closed loop, interaction history improves strict-threshold attainment in simulation and yields the strongest zero-shot performance on hardware. All policies are trained exclusively in simulation and transferred to the physical robot without real-world training or fine-tuning. These results show that physical context should be evaluated by the decisions it supports rather than by predictive accuracy alone. Code will be released upon acceptance.

0.15

Co${}^{2}$Skill: Whole-Body Control via Skill Composition for Long-Horizon Human-Environment Interaction

cs.RO cs.GR ·2026-10-07 ·Jeonghwan Kim, Hyeonwoo Kim, Hanbyul Joo
code/data similarity 0.72
Abstract · 12 pages, 3 figures, 2 tables. Project page: https://canoneod.github.io/projects/coskill/

Achieving human-level dexterity in complex, unstructured environments requires the seamless integration of whole-body scene interaction and dexterous object manipulation skills. While existing physics-based controllers generate physically plausible behaviors in each domain, they largely address these two capabilities independently. In this paper, we present Co${}^{2}$Skill that integrates scene interaction and dexterous manipulation through a unified policy formulation. Built on a pretrained motion prior, the policy uses task and phase dependent observation masks to select information relevant to the current interaction goals. We introduce a goal-conditioned loco-manipulation curriculum that combines partial reference guidance for precision with exploration from varied initial states while allowing goal-directed execution beyond the demonstrated trajectories. We further introduce a cross-task curriculum that jointly trains individual skills and selected task sequences, preserving physical states across task boundaries and maintaining grasps during subsequent scene interactions. Together, these support sequential task execution and simultaneous scene interaction with object manipulation. We evaluate sitting, standing, climbing, stair traversal, and goal-directed manipulation, together with sequential execution and with random different conditions. Additionally, we demonstrate skill compositions in indoor environments, illustrating their integration within the same control formulation.

0.31

VidAct: Learning Manipulation from In-the-Wild Videos with Object-Centric 3D Awareness

cs.RO ·2026-09-29 ·Hang Li, Mingxin Zhang, Zihan Wu, Yang Tian, Dong Chen +7 more
similarity 0.72
Abstract

Video demonstrations offer a scalable alternative to costly robot data for learning manipulation, yet existing reconstruction-based approaches often rely on constrained camera viewpoints or human-to-robot retargeting, while the reconstructed trajectories are difficult to adapt to new objects configurations without distorting the trajectory shape. Another key limitation is that the resulting policies often lack precise object-level 3D geometry awareness, limiting object grounding and object shape awareness critical for precise manipulation. To bridge these gaps, we propose VidAct, an efficient video-to-robot framework that learns object-centric, 3D-aware manipulation policies from a single monocular video per task and enables zero-shot real-world deployment. VidAct consists of three key components. First, VidAct reconstructs object meshes and motion from arbitrary demo videos and canonicalizes the motion in the static object frame, avoiding embodiment-specific retargeting and accommodating diverse camera viewpoints. Second, VidAct employ residual trajectory transfer for adapting the reconstructed motion to novel object configurations while preserving its motion shape. Finally, as the key policy-learning component, VidAct predicts simulation-provided privileged complete-object point clouds at each frame as an auxiliary task while retaining RGB-only deployment, providing dense object-centric supervision over both object pose and 3D geometry. Experiments on human, robot, generated, and internet videos demonstrate broad video applicability and zero-shot deployment. Per-frame complete-object 3D supervision improves policy generalization and sim-to-real success, while residual trajectory transfer enables reliable trajectory adaptation with better shape preservation.

0.39