CS Paper Radar

Understanding KV Residency in Production-Scale Agentic LLM Workloads

Mayank Arya, Agrim Bari, Anjaly Parayil, Yogesh Simmhan, Renee St. Amant, Victor Rühle, Saravan Rajmohan

cs.DC ·submitted 2026-10-16 03:09 UTC · v1

Abstract

Agentic large language model (LLM) applications turn one user request into a sequence of model and tool calls over a growing context. Retaining this context's key-value (KV) state in GPU memory lets later calls reuse it instead of recomputing it, but at fleet scale this needs substantial memory. We characterize four production Microsoft M365 workload traces (Deep Research, Enterprise Assistant, Coding Agent and Enterprise Chat) spanning more than 121 million model calls. In Deep Research, the application issues 89% of model calls and the median context grows from about 10K to 68K tokens by the 30th call. About 80% of context tokens are served from the prefix cache. With the public Llama-2-70B KV layout standing in for confidential models, one 99th-percentile Deep Research session exceeds the 80 GB HBM of an NVIDIA H100, and holding all live sessions at their peak needs an estimated 501.8 TB of HBM, although inference occupies only 5.6% of that retention time. Trace-driven replay shows that a one-hour idle cap cuts this ceiling by 3.6x while raising the share of calls that recompute context only from 4.07% to 4.53%. Under tighter budgets, eviction alone is insufficient: at one tenth of the busiest hour's demand, LRU eviction makes 63% of Deep Research calls recompute and clairvoyant furthest-next-use 31%, whereas multi-resolution retention (MRR), which demotes the LRU session's KV state to int4, lowers this to 13.6%. Placement imposes a separate limit: when the next call reaches a different deployment, cached-context reuse drops from 89% to 29%, and treating KV state as deployment-local raises the recompute floor under unlimited memory from 5.4% to 20.2%. These findings motivate retention that changes the representation of KV state, together with deployment-aware routing or migration. We plan to release AgenticTraceSim, a parametric trace generator, and a residency replay framework.

Closest papers

Nearest neighbours by meaning across the whole index.

KVMem: Virtualizing Million-Token Agent Workspaces on a Consumer GPU

cs.LG ·2026-09-04 ·Di Chai, Leye Wang, Zeshen Su, Zhiguo Xia, Zhihang Yu
similarity 0.75
Abstract

Modern LLM agents operate in persistent workspaces whose accumulated history can exceed both GPU KV capacity and the model's native context window. Existing systems typically compact older context into summaries or retrieve it later as text, either losing fine-grained execution evidence or repeatedly prefilling content that the model has already processed. We present KVMem, a KV-context virtualization system that preserves overflowed workspace history as paged KV state across GPU memory, host memory, and NVMe. KVMem uses lightweight, model-native attention-space indexes to select relevant historical blocks and materializes a query-dependent execution view bounded by the model's native context window. Extensive evaluations on long-context agent benchmarks spanning histories up to one million tokens, including LongMemEval, MemoryAgentBench, and AgentLongBench, show that KVMem generally achieves higher task utility and greater inference efficiency than compaction-based approaches, the de facto standard for handling context overflow. In the DeepSWE long-context test with Qwen3.8-27B, KVMem improves task success from 43.8% with compaction-only context management to 48.4%. In our local-deployment evaluation, KVMem runs Qwen3.6/3.8-27B NVFP4 with MTP on an off-the-shelf laptop equipped with a 24\,GB RTX 5090 Laptop GPU, virtualizing agent workspaces of up to 1M tokens-four times the model's native 256K-token context window. In a single-session setting, KVMem generates $\sim$50 tokens/s, providing interactive responsiveness for local agent execution. More broadly, by decoupling addressable workspace size from the LLM's native context window, KVMem provides a practical path toward long-running agents whose workspaces can grow beyond that window.

0.38

The Storage View Of KV Cache: Characterizing Cache Behavior Across LLM Workloads

cs.OS ·2026-11-06 ·Talia Q. Chen, Daniel Waddington, Narangerelt Batsoyol, Vijay Chidambaram
similarity 0.74
Abstract

Modern LLM serving increasingly extends KV caches beyond GPU memory into host DRAM, SSDs, and remote storage, yet these stores remain largely governed by workload-agnostic policies such as LRU and fixed TTLs. We ask what execution context is needed by storage to make retention, reclamation, and placement decisions across heterogeneous workloads. We characterize KV-cache reuse, lifetime, and footprint at block granularity across 11 production and public traces spanning chat, API serving, RAG, coding agents, tool-using agents, and multi-lineage workflows. We examine reuse sources, recurrence timing and frequency, useful lifetimes, and storage consumption. Across workloads, KV state takes two recurring forms. Single-session state is reused within one execution: its footprint grows as sessions deepen and accumulates across concurrent sessions; it can remain useful through long idle periods but loses value at session completion. Multi-session state recurs across sessions of the same workload, outlives individual sessions, and spans hot prefixes and a large infrequent tail. While prior systems often exploit application-, agent-, or workflow-specific knowledge, our results suggest that three generic signals (a workload identifier, a session identifier, and session completion) expose much of the structure needed for KV-storage management. Trace-driven comparisons show that workload-specific recurrence estimates retain up to 22% more within-session hits and reduce dead state by up to 40%; a session completion signal eliminates the fundamental idle-time reclamation tradeoff for single-session state; and session-aware reuse classification identifies shared state 4-700x more selectively than request-level access counts. These results motivate a small cross-layer interface for workload-aware KV storage without application-specific semantics.

0.14

The Cost of Context: Profiling the Energy Footprint of Input Tokens in Large Language Models

cs.DC ·2026-10-14 ·Boris Ruf, Marcin Detyniecki
similarity 0.73
Abstract · Accepted at HotCarbon'26, the 5th Workshop on Sustainable Computer Systems; to appear in ACM SIGENERGY Energy Informatics Review, Vol. 6, Is…

The rapid adoption of Retrieval-Augmented Generation (RAG) and long-context LLMs has shifted the computational burden toward the prefill phase---the initial stage where the model processes all input tokens in parallel before generating a response---yet its energy impact remains poorly characterised. We investigate the contradiction between massive hardware-level power spikes and the sub-linear marginal cost of input tokens reported in system-level studies. Through high-resolution telemetry of Llama-3.1 and Qwen-2 models on NVIDIA A100 hardware, we identify the efficiency threshold where $O(n^2)$ attention complexity overcomes GPU parallelisation. Our results quantify how optimised memory orchestration (PagedAttention) delays this scaling bottleneck across three orders of context scaling, yielding up to an 8.9$\times$ energy efficiency advantage at 112,000 tokens compared to standard baselines. Furthermore, we characterise the energy disparity between input and output tokens, demonstrating that optimised serving (vLLM) causes this ratio to narrow (from $\approx$850$\times$ to 750$\times$) as context scales due to high decode efficiency, whereas unoptimised baselines show a much smaller, roughly constant gap ($\approx$150--230$\times$) because their prefill is itself expensive. This work establishes context-scaling laws that differentiate engine-level optimisations from inherent model constraints, providing an empirical framework for sustainable LLM deployment.

0.47

Real Long-Term Memory for AI: A 50-Million-Token Window That Is Faster and Cheaper Than Recompute

cs.CL cs.AIcs.DCcs.LG ·2026-10-07 ·Sietse Schelpe
similarity 0.73
Abstract

A large language model can only use the text that fits in its context window, and it recomputes its internal key-value (KV) state for a prompt every time the prompt is sent. We test a memory layer, the public package galahad-kv, that saves the KV state of each block of about 16,000 tokens to encrypted local NVMe disk and loads it back later, byte-exact, without recomputing it. We ran it on 50,000,000 tokens of real public text, served through vLLM on one NVIDIA H100, with Gemma 4 12B and Gemma 4 31B. Every block we probed was loaded back from the encrypted store with no recompute (100 of 100, at depths from 0 to 50M tokens) on both models. Loading a block was 2.8x to 4.3x faster than recomputing it and used 8.8x to 12.3x less GPU energy, and GPU memory stayed flat over the whole 50M-token stream. Asked about facts planted millions of tokens earlier, the 12B model gave the right answer 82 times out of 100 and the 31B model 98 times out of 100. Neither model made up an answer. The limits are as follows. This is reuse of stored state, not a wider attention window: one block is loaded at a time, and how well a question is answered depends on the model. Writing the memory is a one-time cost, and the store takes terabytes of local NVMe disk. We describe the test protocol, which is built to resist common ways of gaming long-context benchmarks, and give a single-GPU reproduction that uses public software and a free licence for the package.

0.15

From LLM Inference to Agentic Workloads: Characterization and Implications for Serving Systems

cs.OS cs.AIcs.DCcs.MA ·2026-08-15 ·Chaokun Chang, Yukun Zhou, Kaihua Fu, Dakai An, Tianyu Feng +8 more
benchmarkhighly cited similarity 0.70
Abstract

Agentic applications are shifting AI serving from isolated model inference to long-running workloads in which LLMs coordinate tools, environments, and persistent state. However, the system behavior of these workloads---where latency, cost, and bottlenecks arise---remains poorly characterized, leaving serving systems to rely on assumptions built for conventional inference. We present AgentSysBench, a benchmark suite and measurement toolkit with ten representative agentic applications and unified systems-level instrumentation. Across controlled deployments and production traces, we identify six properties that distinguish agentic workloads from conventional LLM serving: (1) execution is heavyweight and stateful, with non-LLM components dominating latency in 5 of 10 applications and sandbox working-set memory peaking at 28 GB per session; (2) applications compose components with heterogeneous resource affinity---GPU-bound inference, memory-bound retrieval, CPU-bound sandboxes---whose task latencies diverge by up to 32x; (3) bottlenecks shift across requests, models, and deployments; (4) production sessions hold state idle for minutes to hours between active steps; (5) a control-plane tax---auxiliary LLM calls and context overhead from tool schemas and observations---crowds out productive compute and context; and (6) production traces from three applications reveal heavy cross-request redundancy in search queries and web fetches, exposing a large caching opportunity. Four design explorations demonstrate that these findings are actionable: task-aware serving reduces latency by 29--40%, communication-aware placement by up to 4.5x, state offloading reduces memory usage by 4.6x, and tool-result caching removes 35.2% of redundant search calls and saves 19.3% of aggregate search latency.

0.44

The Physical Cost of Context: Quality-Constrained Resource Accounting for Coding Agents

cs.SE cs.AI ·2026-10-26 ·Zhongming Yu, Yitong Ma, Hengjia Yu, Boqin Yuan, Xiangye Lin +2 more
publishedhot direction similarity 0.69
Abstract · Accepted at the NeurIPS 2026 Workshop on Resource-Aware Agentic AI (RAAAI). 15 pages, 2 figures, 6 tables

Coding agents resend a growing context on every model call, and context policies are usually judged by the prompt tokens they save. Executed work also depends on call count and prefix reuse: a caching runtime prefills only the tokens after the longest cached prefix. A shorter prompt can therefore cost more if it rewrites cached history. Our quality-gated protocol splits executed prefill into logical prompt minus reused prefix and measures KV residency, time, and energy. On 450 localization cases derived from SWE-rebench V2, preloading ten retrieved blocks (Eager) and adding anchored history compaction (Compact) both pass a five-point non-inferiority gate. In a separate 900-cell study, Eager cuts model calls by 35.7% and the GPU-energy proxy by 33.2% against on-demand search (Grep); Compact saves nothing further. Enabling prefix caching leaves Eager's prompt volume similar (+8.3%; its 95% CI spans zero) but cuts its uncached prefill by 67.7%. Deleting history can turn a token saving into extra work. With mini-SWE-agent on 100 SWE-bench Verified instances, keeping only the last five observations (Mask-5) cuts Eager's prompt volume by 33.3% but loses 135.9k reusable tokens per task. Uncached prefill rises by 608.5%, the energy proxy by 125.6%, and the policy misses the quality gate. Policies thus save physical work by shortening the trajectory and can multiply it by editing reusable history.

0.40

Understanding the Energy Cost of Quantized Agents on Shared GPUs

cs.PF ·2026-10-30 ·Stephen Abkin, Alex Flesher, Aldric Yang, Nitheesh Kodarapu, Deepak Panigrahy +1 more
similarity 0.69
Abstract · 16 pages, 8 figures. Alex Flesher and Aldric Yang contributed equally

Quantization can lower the energy of language-model calls and free memory for serving more agents, but its benefit per completed task remains unclear when agents share a GPU. Measurements of fixed requests or isolated agents leave open how the agents' generated work interact with competition for compute and cache. We present a systematic study of precision and admission limits for two agent models on A100 deployments with 40 or 80 GB of memory, using coding and data-analysis tasks with independently verified outcomes. We replay recorded calls across precisions to isolate execution energy and cap the cache to test the value of freed memory. For both models with four admitted agents where requests fit in the cache, 4-bit weights with 16-bit activations execute the same calls with 10-25% less energy than 8-bit weights and activations. Despite this saving, extra work and fewer completions in live runs raise their energy per verified completion by 49%. Where requests compete for cache on the 40 GB deployment, 4-bit weights cost less, and capping their cache raises energy per verified completion by 34% with 16 agents. These results show how generated work and cache demand change the energy benefit of quantization, providing a practical basis for choosing precision and admission limits together.

0.23

PackServe: SLO-Aware Request Scheduling for Agentic LLM Serving at Scale

cs.DC ·2026-09-27 ·Zhiyuan Tan, Dejiang Zhu, Jingzhe Jiang, Yihao Zheng, Yang Tian +2 more
similarity 0.69
Abstract · 13 pages, 13 figures

Request scheduling is a key challenge in large-scale clusters serving agentic large language model (LLM) workloads. An effective scheduler must preserve key-value cache (KVC) reuse across long, shared prefixes, meet token-level latency service-level objectives (SLOs), and minimize GPU resource footprint. Existing schedulers struggle to reconcile these requirements: request consolidation can sacrifice cache locality and increase prefill/decode interference, compromising both SLO attainment and resource efficiency. We present PackServe, a scheduler designed to reduce resource costs while meeting latency SLOs for agentic LLM serving. PackServe uses compact white-box models to predict latency under prefill/decode interference. Guided by these predictions, it packs requests onto fewer serving instances while preserving KVC reuse and SLO constraints, trading available latency headroom for improved per-instance throughput. Evaluation on 64 NVIDIA H20 GPUs shows that PackServe uses up to 16.8% and 24.6% fewer GPU-hours than state-of-the-art schedulers under 30-ms and 50-ms TPOT targets, respectively, while meeting the target TPOT objectives. PackServe has also been deployed in our production cluster comprising over 1000 GPUs, where it reduces the resource footprint by 34.7% compared with the original production scheduler.

0.21