CS Paper Radar

An Embedded Industrial Irrigation System with Weather-Integrated Intelligent Scheduling

Kiarash Zangooei, Arya Masoodpay, Hamid Reza Ghaeini

cs.ET ·submitted 2026-10-16 09:14 UTC · v1

Abstract

Efficient irrigation management requires timely responses to soil moisture conditions and anticipated weather changes. This article presents an embedded, weather-based irrigation system that integrates soil moisture monitoring using multiple sensors, edge-based decision-making, automated pump control, and local data management. Four capacitive soil moisture sensors are connected to an STM32F103C8T6 microcontroller for data acquisition, while a BTT Pi V1.2 platform evaluates the sensor data, retrieves short-term weather forecasts, makes irrigation decisions, manages a graphical user interface, and stores operational data locally. Individual sensor readings serve as the basis for zone-level irrigation decisions, while the median of four time-averaged readings supports monitoring and analysis. Forecasted precipitation is taken into account as effective precipitation to reduce the calculated irrigation requirement before the pump is activated. The system was evaluated as part of a one-month cultivation trial with radishes, during which a total of 38,112 data points from measurement cycles were recorded. The median value of normalized soil moisture averaged 47.93\% and remained predominantly within the configured control range. Three irrigation events with a planned total irrigation volume of 26.68 L were recorded. Finally, we demonstrate the technical feasibility of integrating sensors, weather data, local data processing, automated control, and data collection into a scalable platform for precision irrigation.

Comment
9 pages

Closest papers

Nearest neighbours by meaning across the whole index.

An Uncertainty-Aware Hybrid Mathematical-Machine-Learning Model for Smart Irrigation Decision Support

cs.LG stat.AP ·2026-09-12 ·Andrea Scariolo
theorycode/data similarity 0.59
Abstract · 19 pages, 8 figures, 7 tables. Code: https://github.com/ascariolo/hybrid-model-irrigation-dss

Agriculture accounts for roughly 70% of global freshwater withdrawals, yet irrigation is still commonly scheduled reactively, with no forecast of where soil moisture is heading and no statement of confidence in that forecast. Data-driven models are accurate but opaque and point-valued; water-balance models are transparent but carry large structural error. Neither alone supports a defensible irrigation decision under uncertainty. This study coupled the two and carried uncertainty through to the decision: a four-parameter water-balance core, calibrated on training data only, was corrected by a Random Forest that learned nothing but the physical residual, conformal prediction attached 90%-nominal intervals, and a risk-aware rule converted the interval lower bound into an irrigation trigger. It was evaluated on three years of hourly in-situ measurements from a rainfed Mediterranean cropland station under a strict chronological split, scored against persistence, from one hour to one week. At the 24 h horizon the hybrid reached RMSE 0.00925 m^3 m^-3 and +9.4% skill, roughly double the best of nine baselines, of which only the Random Forest beat persistence. Skill did not grow with lead time: it peaked at +27.4% at three hours and fell to +1.2% at one week. Conformalised quantile regression was better calibrated and 11% sharper than constant-width conformal prediction. The risk-aware rule raised management-threshold crossings detected in advance from 0.905 to 1.000, at a precision cost of 0.975 to 0.950 and 3.7% more notional water, and beyond 72 h the point forecast fell below the no-forecast rule while the interval-based rule did not. Uncertainty quantification therefore governs the lead time over which forecast-driven irrigation advice remains trustworthy, and here transparency in the physical layer cost no measurable accuracy.

0.41

AgriDefend: A $205 Offline Edge Device that Detects Crop Stress Before Visible Symptoms via Multimodal AI Fusion

cs.LG eess.SP ·2026-10-26 ·George Xu, Nikhil Vincent, Elizabeth S. Forbes
similarity 0.56
Abstract · 3 pages, 3 figures

Most in-field crop-monitoring devices sense a single modality -- either a camera looking at the canopy or a probe reading the soil -- and so cannot detect stress that begins below ground before it becomes visible above it. We present AgriDefend, a self-contained consumer-grade edge device that fuses both. A MobileNetV2 convolutional neural network (CNN) analyses canopy imagery, and a Random Forest classifier integrates trend features from a single soil probe: moisture, the rate of change in pH and in N, P, K, and belowground CO2 relative to ambient (a proxy for soil respiration). A logistic-regression meta-learner fuses the two into a five-class crop-health prediction, all on a Raspberry Pi 5 with no cloud or cellular link. On a controlled greenhouse drought trial with wild radish, the fused model reached 87% accuracy (R^2=0.88, MAE=0.05) at 1.4 s INT8 TensorFlow Lite inference, and its soil signals preceded visible wilting by about four days. The complete bill of materials is $205, roughly a fifth of comparable commercial nodes, positioning multimodal, sustainable crop sensing as a practical consumer-electronics product for connectivity-limited settings.

0.14

Zero-Shot Forecasting of In-Situ Soil Moisture and Temperature with a Time-Series Foundation Model

cs.AI ·2026-10-22 ·Mohammad Talaei, Mohammad Goudarzi, Maille Todd, Vanessa N. L. Wong, Iadine Chadès
published similarity 0.55
Abstract · Accepted at the NeurIPS 2026 Workshop on Tackling Climate Change with Machine Learning

Soil moisture and temperature govern plant-water availability and microbial activity, making them key indicators for evaluating land-restoration efforts on degraded landscapes. However, the physical and data-driven models normally used to forecast them both need information that a newly instrumented restoration site does not yet have: hydraulic parameters for the former and months of per-site training data for the latter. We evaluate TimesFM 1, a 500M-parameter time-series foundation model, zero-shot on 15-minute telemetry from 27 sensor stations across three land-management regimes (Control, Treatment, Scald) at a semi-arid restoration site, forecasting 5 cm and 30 cm soil moisture and enclosure temperature at seven lead times from 1 h to 168 h. Using gap-aware rolling-origin evaluation across sensors, we find that TimesFM beats the best rule-based statistical forecasting baselines (persistence, seasonal-naive, or 7-day climatology) by 21-76% at sub-daily lead times but loses by 6-79% beyond a day, a pattern explained by a diurnal-alignment mechanism that holds for both soil-moisture depths and temperature. A CatBoost baseline trained walk-forward on the same origins with full history and weather covariates never wins overall, and we show that its weakness is partly a cold-start effect specific to short deployments. We additionally quantify the inference cost of zero-shot forecasting on commodity CPU hardware. Our results highlight a practical trade-off between zero-shot forecasting capability, predictive performance, and computational efficiency.

0.33

Simulating the Marginal Green Contribution of AI Modules in a Smart-Agriculture Platform: Evidence from Two Monte Carlo Experiments

cs.AI math.NA ·2026-09-06 ·Zhaoyang Li, Ruijie Zhang, Zhaoji Sun, Lu Zhang
similarity 0.52
Abstract · 10 pages, 5 figures, 5 tables; bilingual (Chinese title page with Chinese abstract, English full text); companion to platform-level green-va…

Smart agriculture platforms usually bundle AI diagnosis, IoT sensing and decision push into a single package, so the green benefit attributable to each component remains unclear and resource-allocation decisions lack quantitative evidence. Building on a previous platform-level Monte Carlo assessment, this paper makes the components explicit and runs two controlled simulation experiments. Experiment 1 follows the chain from AI capability to farmer behavior to agrochemical input reduction, modeling pesticide/fertilizer reduction as avoidable blind-application share times prescription effectiveness times decision-touch coverage times adoption rate, and compares an experienced-extension mode with the AI mode: the probability of reaching 20% pesticide reduction is essentially zero in the extension mode but 20.7% at baseline, up to 49% with diagnosis accuracy 0.95 and adoption 0.85 under AI; the probability of 15% fertilizer reduction rises from near zero to 52.0%. Experiment 2 compares current practice (P0), IoT engineering retrofit (P1), and P1 plus AI irrigation scheduling (P2): median aggregate water saving rises from 7.8% (P0) to 11.0% (P1) and 16.0% (P2), with AI adding 5.0 percentage points beyond engineering; paddy CH4 reduction reaches 30.5% under AI scheduling versus 19.8% under manual operation, and the rice irrigation-methane subsystem carbon intensity declines 27.9%. Sensitivity analyses of both experiments consistently indicate that the primary bottleneck for meeting green targets is farmer adoption rather than algorithm accuracy, and that AI data fusion is robust to soil-moisture sensing errors. This work provides a reproducible simulation framework for component-level green-value evaluation and promotion-strategy optimization of smart agriculture platforms.

0.37

Deploying and Evaluating a Smart-Agriculture Agentic Engine for Full-Season Soybean Farm Operations

cs.AI cs.RO ·2026-08-31 ·Ao Qu, Panagiotis Michelakis, Linyuan Han, Yiannis Hadjiyianni, Kun Ouyang +6 more
published similarity 0.50
Abstract · Accepted to ACM SIGSPATIAL 2026

This paper presents FAIRY, a full-stack smart-agriculture agent system developed for and deployed to an operating soybean research farm at Harbin Institute of Technology's smart-agriculture site. We develop FAIRY to execute and evaluate agentic agronomic operations on full-season spatiotemporal workflows that span ridge preparation, planting, irrigation, fertilization, pest and disease treatment, harvest, grain handling, drying, and storage. FAIRY integrates APIs and infrastructure across production-grade machinery, fixed soil and canopy sensors, multispectral and thermal drones, satellite vegetation products, a weather station, calibrated crop-process models, agronomic records, and multi-season yield histories. The system is built around the novel "everything is an event" execution paradigm, which represents spatiotemporal world evolution, remote sensing and UAV observations, sensor readings, crop-growth transitions, machinery actions, and management interventions as state-changing events in a shared farm process engine. On top of this event-driven world model, FAIRY implements a complete agentic stack: a knowledge library of atomic agronomic skills; multi-agent controller and orchestration backends; frontier- and edge-model execution; full-path trace logging; and deployment profiling on local nodes. We use FAIRY to evaluate nine state-of-the-art agent controllers across one hundred full-season soybean scenarios that preserve the operational coupling between spatial observations in a 64-ridge field, temporal decision sequences, agronomic constraints, delayed effects, and final yield. We develop an evaluation suite that combines agentic success, full-path spatiotemporal correctness, token cost, and edge-device runtime.

0.52

A Swarm-Coordinated Multi-Robot System for Early Stress Detection in Agricultural Rows Using Multimodal Leaf Sensing

cs.RO cs.AI ·2026-10-06 ·Rishi Gupta, Astha Goyal, Vinay Vishwakarma
similarity 0.50
Abstract

Early stress detection in crops is a necessity today to improve efficiency and reduce waste of time, money, and effort. However, most modern techniques, such as hyperspectral imaging and AI-based systems, are too costly and complex for medium and small-scale farmers to implement. This paper showcases CropSentry, a low-cost, ground-based multi-robot system that uses multimodal leaf sensing to continuously monitor crop health by tracking stress levels. The system comprises two autonomous bots that continuously detect leaf color and environmental data row by row. The observations are spatially mapped and sent over to the master bot, which uses color-coded row segments to generate a real-time web-based dashboard displaying crop health. After 63 observations were collected during the experiments, the results showed an overall crop health classification accuracy of 84.12%, with 82.60% for healthy plants, 88% for nutrient-deficient plants, and 80% for diseased plants. Also, 100% wireless communication success rate across 10 slave observations was achieved. Close-range leaf inspection across multiple bots can detect early stress in crops while remaining affordable, accessible, and scalable. It provides farmers with timely information to improve resource utilization and crop management.

0.21

Agri-SCHOLAR: Simulation-Grounded In-Season Rolling Advisories for Agricultural Crops Using LLM-Bounded Optimization

cs.AI cs.MA ·2026-10-22 ·Geetha Charan, Vedant Balasubramaniam, Manojkumar Patil, V. Priyanka, Kodur Sai Vinay Sathvik +3 more
similarity 0.49
Abstract

Existing agricultural advisories to farmers suffer from several limitations: (a) remain largely expert-driven, (b) do not adequately account for in-season weather, and (c) do not scale to individual farms. In this paper, our objective is to close these gaps by developing Agri-SCHOLAR (Simulation-Grounded Crop Harvest Optimization with LLM-Guided In-Season Advisory Rollouts). Agri-SCHOLAR is a rolling, in-season advisory framework that issues, at intervals of every few days or every week, a personalized advisory using the following information: soil and crop properties, observed weather to date, short-range forecast of weather, and a season extrapolation of weather based on historical analogs. The novelty and depth of Agri-SCHOLAR lies in each advisory being produced by a closed-loop system which couples multiple LLM agents with a powerful crop simulator (such as APSIM in our case). The simulator crucially serves as an evaluation oracle. In Agri-SCHOLAR, the LLM agents propose agronomically sound and feasible bounds on actionable parameters and an optimizer searches within those bounds against a multi-objective reward spanning yield, resource utilization, and economic feasibility. We conduct a detailed 11-year analysis of the maize crop in two selected locations of South Asia and show that Agri-SCHOLAR consistently outperforms the region's standard packages of practice and satisfactorily addresses the limitations of existing agricultural advisories.

0.24

Physics-guided machine learning for saturation control across variable hydraulic conditions in heap leaching

eess.SY cs.LGstat.ML ·2026-10-11 ·Sultan Alhamdan, Daniel Navia, Paulina Quintanilla
similarity 0.48
Abstract

Heap-leaching hydraulics vary between regions of an ore bed, motivating fast prediction models that accommodate different material properties. This study develops a parameter-conditioned physics-guided machine-learning (PGML) surrogate and demonstrates its use in simulated saturation control. A dataset of 4096 numerical Richards-equation trajectories was divided into 2867 training, 614 validation and 615 evaluation cases. The network predicts hourly saturation profiles from the current profile, irrigation rate and four hydraulic parameters, and is trained with an approximate Gardner mass-balance penalty. A daily predictive controller compared 200 constant irrigation rates over a 24-hour horizon. Across the evaluation cases, the median full-cycle tracking deviation was 4.9% of a 0.70 saturation target, equal to that of a tuned proportional-integral (PI) controller, while the PGML controller reached the target without overshoot in the median and applied approximately 4% less irrigation. Moderate physics guidance reduced long-horizon prediction error by approximately 30% relative to data-only training and reduced irrigation-bound activity, but slightly worsened closed-loop tracking. For a matched prediction workload, the surrogate was approximately 70 times faster than the numerical solver, and batched evaluation cost under 2 ms per column for 5000 columns. The results support a reusable physics-guided surrogate for large-scale saturation control in simulation.

0.24