CS Paper Radar

Context-Aware RGB-Thermal-Radar Obstacle Perception for Resource-Constrained ASVs

Pranav Kedia, Edwin Redhead, Heiko Hamann

cs.RO cs.AIcs.CV ·submitted 2026-09-19 12:00 UTC · v1

Abstract

Reliable obstacle perception is challenging for small autonomous surface vessels (ASVs): reflections and glare confound visible-light cameras, vessel motion shifts the apparent waterline, and darkness removes the dominant sensing modality altogether. Rather than treating multimodal fusion as a static accuracy gain, we propose a context-aware architecture that combines RGB and long-wave infrared (LWIR) imagery, frequency-modulated continuous-wave (FMCW) mmWave radar, and inertial context. A bearing-sector interface provides the navigation controller with calibrated obstacle probabilities, radar ranges, and sensor status. It also distinguishes sensor dropout from a valid observation with no detected obstacle. Using new multimodal lake recordings, we deployed the pipeline in a 24-leg closed-loop pilot under uncontrolled lake conditions (16 day, 4 dusk, and 4 night; 351 m), including night legs in which RGB was unusable and the vessel drove on LWIR and radar evidence alone. On eight held-out low-light recordings, the calibrated fusion model achieved average precision (AP) 0.869 and expected calibration error 0.108, compared with AP 0.673 for rule-based fusion, 0.620 for gated fusion, and 0.903 for RGB alone. Our results expose a central tradeoff: RGB ranks best when usable, whereas fusion preserves a navigation input when RGB fails. This work is a step toward perception that remains usable and degrades predictably across multi-day ASV missions.

Closest papers

Nearest neighbours by meaning across the whole index.

Seeing above the waves: A modular sensing framework for data acquisition at sea

cs.RO ·2026-08-11 ·Jonathan E. Schmidt, Julius Wirbel, P. Nicholas Hansen, Morgan Louédec, Christian L. H. Westerdahl +2 more
published similarity 0.66
Abstract · Submitted and accepted to the IFAC WC 2026 as an invited session paper for track 7.2 Transportation and Vehicle Systems - Marine Systems

Advancing autonomy for surface vessels requires systematic evaluation of their sensing and perception subsystems. Yet, maritime environments impose unique challenges: sensor installation is constrained by vessel layout, environmental conditions such as fog or sea clutter are difficult to reproduce, and long-duration missions complicate data collection. This work addresses the question: How can we design a modular and reproducible sensor platform for maritime autonomy? We present a comprehensive design blueprint that incorporates diverse modalities - RADAR, LiDAR, IMU, GNSS, AIS, RGB and LWIR cameras, and weather sensors - to enhance environmental awareness and vessel proprioception. Supported by a dedicated ROS2-based software framework for data management, our modular platform enables long-term data collection, hardware-in-the-loop testing, and integration with existing sensors and algorithms. By unifying hardware design and data capture methodology, the platform enhances reproducibility and comparability across vessels and research projects. The proposed framework bridges engineering implementation and research methodology, providing the foundation for standardized, verifiable datasets essential to advancing situational awareness and autonomous maritime navigation.

0.19

Embedded Bare-Metal Radar-Inertial Odometry

cs.RO ·2026-10-05 ·Nicolai Adil Øyen Aatif, Morten Nissov, Kostas Alexis
code/data similarity 0.62
Abstract

Compact extraplanetary rovers and micro aerial vehicles require robust state estimation frameworks designed to operate under strict computational constraints in unforgiving environments. Typical solutions involving vision- or LiDAR-based sensing are computationally expensive and vulnerable to environments with perceptual degradation, making them poorly suited for resource-constrained platforms and austere conditions. Alternatively, Frequency Modulated Continuous Wave (FMCW) radar offers both robustness and computational efficiency by directly providing velocity measurements coupled with inherent resilience to perceptual degradation. These factors enable robust estimation, thereby reducing reliance on human operators for supervision to ensure platform safety in challenging environments. In this manuscript, we propose an embedded radar-inertial estimator tailored for low-compute platforms. All sensor drivers, data processing, and aided inertial navigation are performed on a single-core microcontroller, demonstrating its computational efficiency. Flight experiments show translational APE of $0.51-0.82\,\mathrm{m}$ and RPE of $<$3\,\% against motion capture, alongside closed-loop flight through an unmodified PX4 stack. The firmware and printed circuit board design are openly available on GitHub at https://github.com/ntnu-arl/embedded_rio and https://github.com/ntnu-arl/embedded_rio-pcb respectively.

0.32

SenseWeather: Multimodal Sensing for Robust Robotic Perception under Extreme Conditions

cs.RO cs.CV ·2026-10-08 ·Fucai Ke, Sukai Huang, Junyi Hao, Kal Backman, Naim Rastgoo +2 more
benchmark similarity 0.62
Abstract

Robotic perception must remain reliable when extreme environmental conditions severely degrade the primary RGB observation. Although robotic platforms commonly carry complementary sensors such as depth and infrared, much of the modern perception stack remains RGB-centric, creating a mismatch between multimodal onboard sensing and pretrained downstream models. We study whether complementary sensing can be used upstream to recover a task-compatible RGB observation that preserves existing perception capabilities without modifying or retraining the downstream stack. To this end, we introduce SenseWeather, a controlled multimodal benchmark for robotic perception under severe rain, snow, dust, fog, and darkness, with registered RGB, depth, and infrared observations, clean references, and grounded high-level perception tasks. We further develop Fusion-to-RGB, with two parameter-efficient sensor-fusion realizations based on token-space fusion for a diffusion transformer and residual latent conditioning for an inpainting UNet. Across frozen open-vocabulary grounding and vision-language models, RGB+D+IR fusion improves all paired downstream comparisons over the corresponding RGB-only restorers, including AP50 gains across all ten detector comparisons. Importantly, these perception gains do not consistently follow conventional image-fidelity metrics, and increasing weather severity does not induce monotonic downstream degradation. These results show that complementary sensing can preserve reusable robotic perception under extreme conditions, while highlighting task-level perception robustness as an objective distinct from visual restoration quality.

0.24

Navigational Safety of Marine Surface Vehicles in Restricted Visibility: From Intelligent Vision to Vision-Centered Multi-Sensor Fusion

cs.CV ·2026-11-04 ·Ryan Wen Liu, Fengchuan Song, Tianxiang Wang, Guobei Peng, Youngrong Kim +5 more
code/data similarity 0.62
Abstract · 42 pages, 16 figures

Marine surface vehicles (MSVs) have attracted considerable attention for their commercial, scientific, and military applications. Owing to their favorable performance-to-cost ratio, shipboard cameras are widely used to detect and recognize potentially hazardous situations across diverse operational scenarios. However, visual perception is inevitably degraded by restricted conditions, including irregular motion of the imaging platform, adverse weather, and long imaging distances. To improve situational awareness and navigation capabilities, complementary sensors, such as the automatic identification system (AIS), radar, and light detection and ranging (LiDAR), etc., have become essential shipboard equipment. Multi-sensor fusion can provide richer perceptual information and help ensure navigational safety of MSVs in restricted visibility. This article reviews recent progress from intelligent vision to vision-centered multi-sensor fusion for newcomers and researchers in intelligent ship navigation and intelligent waterborne transportation system (IWTS). After introducing the generation of quality-degraded images in restricted visibility, we will review intelligent vision methods for four key issues, i.e., shipboard video stabilization, visual perception enhancement, object detection and tracking, and navigable area segmentation. We then examine vision-centered multi-sensor fusion methods, including infrared-visible image fusion, radar-vision fusion, LiDAR-vision fusion, AIS-vision fusion, and other multi-sensor fusion scenarios. Open-source datasets and safety-critical applications are also summarized and discussed. Finally, we highlight open challenges and future research directions. The collected maritime datasets are available at https://github.com/MAPGroup/Datasets and will be regularly updated.

0.36

What Limits mmWave Human-State Sensing for Robot Perception?

cs.RO cs.HC ·2026-11-06 ·Shuntian Zheng, Guangming Wang, Hongyang He, Shuai He, Yu Guan
similarity 0.61
Abstract

Assistive robots and search-and-rescue platforms require reliable human state sensing in smoke, darkness, and privacy-sensitive environments, where cameras and LiDAR may be unreliable Millimeter-wave radar offers an alternative that works without ambient light, penetrates smoke, and does not capture visual appearance. However, the compact arrays that fit robot size, power, and cost budgets have limited apertures, producing joint-localization errors on the order of decimeters at a few meters, large enough to compromise the safety margins and tracking accuracy a robot depends on. Existing pipelines reduce pose error through frame fusion, multiple viewpoints, return selection, or stronger estimators, but examine one technique at a time, without relating its effect to a shared measurement limit or separating gains from added information from gains from estimator completion. We address this gap with a framework that models the human and environment as one time-varying scattering field and states a Cramer-Rao type error floor for joint localization as a function of bandwidth, aperture, signal-to-noise ratio, fused frame count, phase coherence, and visibility of retained returns. We then use existing frame fusion, multi viewpoint, return selection, and pose estimation methods as matched probes of this floor rather than as competing pipelines. Under the evaluated conditions, experiments on three datasets and a live deployment show these strategies move joint localization error in the predicted directions, for example lowering mean per-joint position error from about 97 to 65 mm with a second viewpoint, while a stronger estimator mainly lowers overall error by completing joints the measurement cannot resolve. These results give the robotics community a principled basis for deciding whether to prioritize observation design or estimator capacity when deploying reliable mmWave human sensing.

0.28

MS-DOTT: A Multi-Modal Dataset for Off-Road Traversability Estimation

cs.RO ·2026-11-02 ·Shivani Subramanyan, Saksham Sharma, Samahith SA, Ahaan Kotian, Suresh Sundaram
published similarity 0.61
Abstract · Accepted to RAAI Conference 2026

Autonomous robots are gaining traction in off-road environments, driven by their rising demand in agriculture, defense, and search-and-rescue operations. However, these environments are inherently unpredictable and navigation remains a formidable challenge given the complex environmental conditions including challenging terrain and varying illumination. Off-road autonomy requires robust perception across multiple spatial scales and imaging modalities, yet most sensing setups struggle to capture both far-field environmental context and near-field terrain detail simultaneously across various illumination conditions. To facilitate development of robust off-road perception and traversability estimation systems, we propose MS-DOTT (Multi-Sensor Dataset for Off-road Terrain Traversability) a comprehensive multi-modal off-road dataset with long-range 3D sensing and short-range, fine-grained perception to facilitate high-fidelity terrain understanding by combining proprioceptive signals for tracking vehicle dynamics with exteroceptive imaging and pointcloud data. The dataset includes trajectories recorded across nominal lighting, low-light, and no-light conditions with diverse 2D and 3D sensing for both long-range large-scale and short-range high-resolution sensing, as well as 4D RADAR measurements that provide velocity estimates for detected pointclouds. We demonstrate the utility of the dataset by adapting a SOTA multi-sensor fusion method for the purpose of traversability estimation. This dataset will aid the robotics community in advancing research and development of methods for traversability estimation, off-road perception and multi-sensor fusion in unstructured environments.

0.21

Radar2Plan: Benchmarking 4D Radar for End-to-End Open-Loop Ego-Trajectory Planning

cs.RO ·2026-10-05 ·Ling Yao, Yichun Xiao, Jin Jin, Yihan Zhang, Fangqiang Ding
benchmark similarity 0.60
Abstract · 9 pages, 5 figures, 3 tables

Adverse weather and poor illumination remain major challenges for robust ego-trajectory planning in mobile autonomy. 4D radar offers reliable sensing under adverse conditions and direct radial-velocity measurements. However, sensing robustness does not necessarily translate into robust downstream planning, while existing 4D radar benchmarks focus primarily on perception rather than trajectory planning. We present Radar2Plan, a modular benchmark for open-loop ego-trajectory planning using real-world 4D radar data. Radar2Plan connects sensor encoders, scene representations, and planning heads through common interfaces, enabling controlled comparisons between different sensor and planner configurations. Using DSERT-RoLL and MAN TruckScenes, we evaluated seven combinations of camera, 4D radar, and LiDAR in four representative planning baselines and 12 weather and illumination conditions under a unified protocol. To our knowledge, Radar2Plan is the first benchmark dedicated to evaluating real-world 4D radars for autonomous driving planning. Experiments show that 4D radar alone supports competitive ego-trajectory planning and robust performance under adverse conditions. Sensor-configuration comparisons further demonstrate its complementary value to other modalities, while revealing dependencies on sensor combination and planning architecture. The modular design also supports additional datasets, sensing modalities, and planners, providing a flexible foundation for future research on radar-based autonomous driving planning.

0.17

Early versus Late RGB-Infrared Fusion for Counter-UAV Detection: A Comparative Study

cs.CV ·2026-10-21 ·Alberto De Zan, Denis Tavaris, Gian Luca Foresti, Ivan Scagnetto
published similarity 0.60
Abstract · This version differs from the article published in IEEE Access. It includes revisions requested by the reviewers during the final review rou…

This paper presents a novel strategy for UAV detection through visible (RGB) and infrared (IR) fusion, in order to improve accuracy and precision in harsh environments and weather conditions. In this research, two opposite approaches have been studied and implemented: the first concerns image-level (early) fusion, which merges two different spectra into a single image to which one detector is applied. On the other hand, the second approach, called decision-level (late) fusion, focuses on blending together the output bounding boxes of two different detection pipelines, aiming to create a common result that can be applied to both spectra simultaneously. Both strategies have been extensively tested in a dedicated environment, which included alternating low and high brightness scenes, different backgrounds (sky and ground), distances (5, 25 and 60 m), altitudes and zoom levels (1X, 2X and 4X). These tests allowed for the assessment of actual detection capabilities and system reliability in real-world applications. Furthermore, the two fusion strategies were evaluated and compared over a set of aligned images in order to highlight the better approach of the two. The results indicate that early fusion achieves better raw performance, since it incorporates the thermal information from the beginning of the training process. However, late fusion presents an innovative and useful detection workflow that can be applied in cases of sensor or frame misalignment. Both positive and negative aspects have also been pointed out and discussed, in order to give a more comprehensive overview. Finally, the paper outlines implementation considerations and practical recommendations based on operational priorities. Overall, the findings contribute to the research in RGB-IR fusion modalities, with the goal of enhancing UAV detection capabilities.

0.38