CS Paper Radar

MESS: Multi-Exposure Sequence Synthesis for Generalizable Image Enhancement

Ruodai Cui, Shuaizheng Liu, Rongyuan Wu, Lei Zhang

cs.CV ·submitted 2026-10-17 13:19 UTC · v1
top venuedatasetcode/data

Abstract

Despite the significant progress in image enhancement under adverse illuminations, such as low-light image enhancement, exposure correction, and backlit image enhancement, existing models show limited generalizability to different scenarios. A major bottleneck lies in the lack of large-scale and diverse training data, as these tasks typically rely on manually captured, precisely aligned image pairs that are expensive to scale up. Although synthetic data have been explored as an alternative, existing synthesis methods are limited in modeling complex adverse illumination conditions and camera imaging pipelines. To address this issue, we propose a novel framework to synthesize realistic training pairs for generalizable image enhancement in the wild. Specifically, we first derive multi-exposure sequences (MES) from high-bit RAW images by rendering them under different exposure settings through an emulated ISP pipeline. Using these RAW-derived MES as supervision, we train a diffusion-based RGB-to-MES generator to synthesize plausible exposure sequences from a single 8-bit RGB image, extending the synthesis pipeline from limited RAW collections to large-scale in-the-wild RGB data. For each source image, we randomly sample one synthesized exposure variant as the degraded input and use the original high-quality RGB image as the target. With the proposed MES Synthesis (MESS) approach, we construct a dataset of 500K training pairs and train a lightweight network, which demonstrates significantly better generalization performance than existing models across various image enhancement tasks. Code and data are available at https://github.com/PolyU-VCLab/MESS.

Comment
Accepted at NeurIPS 2026. Code and data are available at https://github.com/PolyU-VCLab/MESS

Closest papers

Nearest neighbours by meaning across the whole index.

A General Pipeline for Dense Illuminant Estimation via Physically Based Synthetic Data

cs.CV ·2026-10-05 ·Luca Cogo, Gianmarco Corti, Simone Bianco, Raimondo Schettini
published similarity 0.70
Abstract · Accepted at the 34th Color and Imaging Conference (CIC 2026), hosted by the Society for Imaging Science and Technology (IS&T)

Illuminant estimation is a fundamental problem in computational photography, as it enables the correction of color shifts induced by varying lighting conditions. While learning-based methods have demonstrated strong performance, their progress is hindered by the limited availability of large-scale datasets with accurate illuminant ground-truth. In this work, we propose a general and reusable pipeline to derive dense illuminant chromaticity maps from physically based 3D-rendered scenes. By repurposing an existing 3D scene collection, our approach enables the systematic generation of pixel-wise illuminant annotations under controlled lighting conditions, effectively lowering the barrier to data acquisition for learning-based illuminant estimation. Using this pipeline, we generate a large-scale synthetic set of 74,321 images, which we employ for pre-training both single- and multi-illuminant estimation models. Extensive experiments with state-of-the-art architectures show that synthetic pre-training consistently improves performance, with gains of up to 28% for single-illuminant estimation and up to 57% for multi-illuminant estimation, particularly in data-scarce regimes. These findings demonstrate that synthetic data generation pipelines offer an effective and scalable solution for the pre-training of illuminant estimation methods.

0.17

IDM-Net: A Lightweight Illumination-Decoupled Modulation Network for Low-Light Image Enhancement

cs.CV ·2026-09-25 ·Cheng-Yen Hsiao, Jing-Ming Guo
similarity 0.69
Abstract

Low-light image enhancement (LLIE) remains challenging for lightweight models because illumination restoration and color fidelity are difficult to optimize simultaneously in the RGB color space. Although recent color-decoupled methods separate luminance and chrominance representations, they primarily optimize luminance as an enhancement target, leaving its potential as an explicit guidance prior largely unexplored during feature reconstruction. To address this limitation, we propose IDM-Net, a lightweight Illumination-Decoupled Modulation Network for low-light image enhancement. IDM-Net adopts a dual-encoder architecture consisting of a structure encoder that extracts multi-scale appearance features from the RGB image and a lightweight illumination encoder that learns illumination priors from the decoupled luminance (Y) channel. To effectively exploit these priors, we introduce an Illumination-Guided Modulation (IGM) module that injects multi-scale illumination cues into the decoder through spatially adaptive affine modulation, enabling accurate brightness restoration while preserving natural color consistency. Furthermore, we design a lightweight Feature Refinement Block (FRB) to progressively suppress degradation artifacts and recover fine-grained image details during reconstruction. Extensive experiments on multiple standard low-light image enhancement benchmarks demonstrate that IDM-Net achieves competitive performance among lightweight LLIE methods while maintaining an excellent balance between restoration quality and computational efficiency.

0.24

BC-IHV: Conditioning the Color Space for Stable Rectified-Flow Low-Light Enhancement

cs.CV ·2026-08-22 ·Yi Ai, Zheng Chen, Yuanhao Cai, Yulun Zhang, Xiaokang Yang
similarity 0.68
Abstract · 7 pages, 5 figures

Low-light image enhancement (LLIE) must correct ambiguous exposure without overwriting structure already supported by the input. Generative transport can model exposure ambiguity; however, its flexibility may also alter observable geometry and chromatic content. Moreover, fixed invertible color coordinates are usually treated only as representations, although their inverse mappings reshape the RGB-domain gradients received by the enhancement network. To address these issues, we propose Structure-Anchored Rectified Flow (SA-RF), which maintains correspondence through separate chromaticity/intensity stems, a scale-matched condition pyramid, and HybridAda. HybridAda assigns location-specific retrieval to spatial cross-attention and global exposure modulation to pooled AdaLN. We further introduce BC-IHV, a learnable Box--Cox polar color space whose analytically invertible intensity mapping controls the inverse-gradient dynamic range through a single exponent. This allows the representation to balance dark-range expansion and gradient conditioning instead of adopting a fixed linear or logarithmic law. Experiments on three LOL benchmarks, blind image-quality evaluation, and cross-dataset tests demonstrate consistent reconstruction and perceptual advantages over the sota. Controlled studies further support the effectiveness of both the proposed framework and color representation.

0.10

Dynamic Interpolation for Training-Time Prediction Reshaping in Low-Light Image Enhancement

cs.CV ·2026-10-13 ·Peirui Zhu, Shijie Hao, Jingxi Liao, Richang Hong, Meng Wang
publishedbenchmark similarity 0.68
Abstract · 18 pages, 9 figures. Published in IEEE Transactions on Circuits and Systems for Video Technology (Early Access)

Low-light image enhancement (LLIE) is an important image/video processing problem for reliable visual systems under poor illumination, yet it remains challenging due to the strong coupling among insufficient illumination, noise amplification, and structural degradation. Existing methods typically rely on sophisticated network architectures or engineered objective functions. While effective, the former increases model complexity and deployment burden, whereas the latter relies on empirically tuned loss weights. We revisit supervised LLIE from a training-dynamics perspective and observe that brightness-related errors tend to converge early, while residual noise and structural artifacts often remain insufficiently optimized in later stages. To address this issue, we propose a Dynamic Interpolation Training-only Module (DITM), which introduces no additional learnable parameters and adaptively reshapes the model prediction for supervised feed-forward LLIE training. Specifically, DITM employs brightness-aware interpolation, in which the model prediction is combined with a mean brightness-aligned image constructed by rescaling the model prediction according to the mean brightness of the ground-truth image. By reducing the relative dominance of global brightness discrepancy, DITM makes residual local errors more influential during backpropagation after global luminance has largely stabilized, thereby facilitating artifact suppression and fine-detail restoration in later training stages. DITM is used only during training and is fully removed at inference, introducing no additional inference cost. Extensive experiments on multiple benchmark datasets and CNN-, Transformer-, and Mamba-based LLIE backbones show that DITM consistently improves fidelity and perceptual quality while preserving the inference-time architecture and introducing no additional inference-time computation.

0.28

CHROMA-MILL: Joint Low-Light Enhancement and White Balance under Colored Illumination

cs.CV ·2026-11-03 ·Pol Riubrogent-Comas, David Serrano-Lozano, Maria Pilligua, Michael S. Brown, Ramon Baldrich +1 more
publishedcode/data similarity 0.67
Abstract · Accepted at WACV 2027. 16 pages (main paper + supplementary material), 7 figures, 7 tables. Project page: https://color.cvc.uab.cat/chromami…

Capturing an image in a low-light environment produces a weak, noisy sensor signal. Low-light image enhancement (LLIE) aims to restore it. Auto white balance (AWB) is also required for every image, and the same noisy signal degrades its ability to infer the scene illuminant. LLIE is typically performed first, followed by AWB, but this strategy remains largely unexamined because existing low-light datasets span a narrow range of illuminants and lack illuminant ground truth for evaluating AWB. We address this with CHROMA-MILL, a RAW dataset of 50 scenes captured with a DSLR and smartphone under four calibrated illuminants at eleven intensity levels. Because light is additive, we blend these captures in the linear RAW domain to synthesize physically valid illuminant mixtures with exact chromaticity ground truth. Benchmarking on this data, we find joint correction is best, and introduce CTI-Retinexformer, which supervises an illumination map, a chromaticity prediction, and an illumination-invariant scene embedding, outperforming the best cascade by 0.7 dB PSNR$_L$ and 1.1 $ΔE_{00}$.

0.50

FixAnything: 3D-Consistent Rendering Refinement via Video Generative Priors

cs.CV ·2026-08-24 ·Khiem Vuong, Deva Ramanan, Srinivasa Narasimhan
top venuecode/data similarity 0.67
Abstract · Appearing in ECCV 2026. Project page: https://fix-anything.github.io

Rendering views using 3D scene representations such as Gaussian Splatting (3DGS), Neural Radiance Fields (NeRF), meshes, or even point clouds produces artifacts when input views are sparse or target views lie far from the input. Recent work mitigates these artifacts using diffusion-based generative priors, but is specialized to individual representations and require custom architectures or extensive retraining. We present FixAnything, a single model for fixing a wide range of rendering artifacts. It does so by repurposing a pretrained video generative model, leveraging its implicit multi-view priors with only minimal modification and lightweight finetuning. Our key insight is that even noisily-rendered sequences preserve camera motion and coarse scene structure, allowing cleanup to be formulated as video-to-video translation. To control what scene structure should be preserved, we introduce a binary mask denoting the clean pixels, enabling the model to anchor its output to high-quality inputs (e.g. training views) while refining the rest. To encourage FixAnything to produce 3D-consistent renderings that support downstream reconstruction, we use camera pose accuracy (recovered via structure-from-motion) as a reward signal for direct preference optimization (DPO). Across four distinct 3D representations, FixAnything consistently improves rendering quality with lightweight finetuning, demonstrating that a single generalist video prior can replace multiple specialist refinement pipelines. The simplicity of the framework enables immediate adoption of stronger future video models without architectural redesign.

0.62

RetinexGS: Retinex-Inspired Gaussian Splatting for Low-Light RAW Reconstruction

cs.CV ·2026-11-09 ·Yulang Fei, Huaiyuan Weng, Chul Min Yeum
similarity 0.67
Abstract

Standard 3D Gaussian Splatting (3DGS) pipelines struggle with severely underexposed images, producing unstable colors, floating artifacts, and incomplete reconstructions in dark regions. To better account for noise in these low-light observations, RAW images offer a natural basis for noise-aware reconstruction by preserving linear sensor measurements and providing access to noise metadata. We present RetinexGS, a RAW-domain 3DGS framework that combines Retinex-inspired appearance modeling with sensor-informed optimization for low-light novel-view synthesis. We factorize each Gaussian's color into a view-independent base color and a shared, position- and view-dependent modulation field, regularizing the two components separately to constrain appearance learning from noisy observations. We use DNG noise metadata to weight the reconstruction loss for signal-dependent noise, while distortion-aware rendering avoids spatially resampling RAW targets. To address sparse geometry in dark regions, we introduce depth-guided initialization. We evaluate RetinexGS on three public RawNeRF scenes and two custom-captured low-light RAW scenes. With all methods trained on the same RAW inputs for each scene, RetinexGS outperforms LE3D and RawNeRF in mean sRGB PSNR by 2.18 dB and 2.71 dB respectively, across the five scenes, while supporting real-time novel-view rendering.

0.10

LightBridge: Feed-Forward Generative Relighting for 3D Gaussian Splatting

cs.GR eess.IV ·2026-09-02 ·Hezhi Cao, Panhao Cheng, huangsheng du, Qibiao Li, Youcheng Cai +1 more
code/data similarity 0.67
Abstract · 14pages, 8figures

3D Gaussian Splatting (3DGS) achieves high-quality, real-time novel view synthesis, but the resulting assets have baked-in illumination and cannot be easily relit. Inverse rendering methods optimize simplified reflectance and illumination models for each scene, limiting efficiency and relighting quality. Recent generative approaches leverage large diffusion models for realistic lighting edits, but applying them to 3DGS typically requires an additional per-scene optimization stage to bake the edited appearance into the representation. We present LightBridge, a feed-forward generative framework for controllable relighting of complete 3DGS assets in a single pass. To enable feed-forward training, we construct a large-scale Multi-Illumination Relighting Dataset with paired source and target observations of the same scenes. Latent Bridge Relighting Diffusion models relighting as source-to-target transport in latent space, enabling one-step extraction of 2D visual tokens without iterative diffusion sampling. A Gaussian Propagation Transformer uses a point transformer with sparse image-to-point self-attention followed by point-to-image cross-attention to efficiently propagate these cues across the complete 3DGS, while avoiding full attention over all image and Gaussian tokens. Experiments validate these designs, demonstrating competitive relighting quality and efficient single-pass prediction of complete relit 3DGS assets without scene-specific optimization. The code and dataset will be made publicly available upon acceptance.

0.25