CS Paper Radar

PlaneZip: Lossless Bit-Plane Compression of Training Activations Offloaded over PCIe

Zhufan Gu, Qizhe Tang, Yuxin Wang, Xun Zhou, Hui Feng

cs.DC ·submitted 2026-10-18 05:44 UTC · v1

Abstract

Training under a device-memory budget relies on tensor rematerialization: an evicted activation is either swapped to host memory or dropped and recomputed. Because GPU compute has outgrown PCIe bandwidth, cost-model planners such as MegTaiChi, which charge a swap its full transfer time, almost never swap, and swaps that fill idle link time carry only a small fraction of the saved activations. Saved activations, however, are homogeneously typed arrays with bit-level redundancy beyond zeros, which lightweight bit-plane compressors can remove at line rate. We present PlaneZip, which compresses swapped tensors on the copy path and plans around the compression. Its codec picks, for every 128-byte block, the smallest of zero-value, delta bit-plane, bit-plane, and a new zero-masked bit-plane encoding. A per-tensor predictor reuses the ratio of the previous iteration, and the planner budgets link time in compressed transfer times. On activations captured from five models trained on real data, the codec compresses BF16 activations by 1.71x and FP32 activations by 1.39x (geometric means), against 1.18x and 1.20x for zero-value compression. In trace-driven simulation of a PCIe 3.0 consumer GPU and a PCIe 4.0 datacenter GPU at half the activation memory, PlaneZip cuts the rematerialization overhead by 47% and 31% relative to a bandwidth-aware planner without compression, and by 73% and 54% relative to MegTaiChi's cost model, with an estimated engine area of 0.036 square millimeters.

Closest papers

Nearest neighbours by meaning across the whole index.

NeuralZip: Reusable Setup for Fast Lossless Compression

cs.LG ·2026-10-07 ·Martín Bravo, Samuel Horváth, Gonzalo Navarro, Andrés Abeliuk
similarity 0.78
Abstract

Lossless compression can reduce the storage and movement of model weights without changing their floating-point values, but repeated statistical analysis and code construction add computational overhead. We study whether the statistical structure of exponents can be prepared once and reused. For this, we introduce NeuralZip, which groups chunks with similar exponent distributions, shares Huffman codes, and selectively represents recurring exponent tuples using packed exponents, thereby achieving additional moderate compression ratios. A setup chooses these representations before subsequent encodings, while every encoding still processes the current tensor values. In floating-point model checkpoints, post-setup compression is 1.81-21.33$\times$ faster than the baselines and achieves exact bit-to-bit reconstruction. We show that this setup can be precomputed and transferred from another compatible architecture, preserving similar compression ratios and avoiding the need to amortize setup costs. Therefore, compression adaptation is transferable and reusable. Training checkpoints demonstrate continued reuse as the weights evolve. Finally, GPU experiments reduce active memory usage by up to 27.5$\%$ while reproducing the logits exactly.

0.24

LCT: Losslessly Compressed Tensors with GPU friendly execution for Training

cs.LG ·2026-10-15 ·Max Zhu, Bohang Sun, Pietro Lio, Jialin Yu
similarity 0.73
Abstract

Lossless tensor compression could reduce memory usage during training, but training requires tensors to be repeatedly re-encoded. We introduce Losslessly Compressed Tensors (LCT), a GPU execution framework designed for this repeated encode-decode regime. LCT exploits the natural redundancy in floating point data to reduce storage for weights, activations and optimizer states. Highly optimized GPU kernels implement Huffman coding with precomputed codebooks for low compression and decompression overhead, essential for training. Our analysis characterizes LCT's storage costs and adaptation to magnitude shifts. LCT achieves a compression ratio of up to $1.455\times$, and is demonstrated in training and finetuning settings. On a 162M-parameter NanoGPT, LCT reduces memory usage by $24.6\%$ for a $7.2\%$ step-time increase. In Qwen3-4B fine-tuning, LCT saves up to $23.8\%$ of peak memory, enabling a $3.5\times$ larger context length in training on the same GPU.

0.15

BitSparse: Compact Activation Storage for ReLU Feed-Forward Networks

cs.LG ·2026-10-15 ·Max Zhu, Bohang Sun, Pietro Lio, Jialin Yu
similarity 0.73
Abstract

Reducing memory use in large language model (LLM) training is an ongoing challenge. Activation checkpointing saves memory by recomputation, while lossy compression changes the stored activations. The reemergence of sparse $\relu$ and $\relu^2$ activations creates a third opportunity: losslessly compressing the activation cache itself. We present BitSparse, a GPU-resident lossless compression format for sparse activations. Compression and reconstruction run in custom Triton kernels fused into an autograd function, shrinking the activation cache while recovering it exactly for the backward pass. Bfloat16 (BF16) and FP8 activations are supported. Optional sign-bit packing further increases compression up to close to the theoretical limit. We analyze its compression ratio and compare it to the theoretical optimum. BitSparse lowers per-token VRAM by 31\% and 30\% Modded-NanoGPT and Nemotron-H respectively, with overheads of no more than 1\% at practical sequence lengths. Additionally, a new preallocated buffer system avoids host synchronization during training when variable size tensors are allocated.

0.14

SlackSwap: Bandwidth-Aware Activation Swapping and Recomputation for Memory-Efficient DNN Training

cs.DC ·2026-10-09 ·Hui Feng, Xun Zhou, Yuxin Wang
similarity 0.68
Abstract

Swapping saved activations to host memory once enabled GPUs to train models that exceeded their device-memory capacity when compute throughput and host-link bandwidth were roughly balanced. For example, on a 2015 Titan X, PCIe bandwidth was sufficient to offload all VGG-16 activations during the forward pass. This balance no longer holds. From the Titan X to the H100, peak training throughput increased by 141x, whereas host-link bandwidth improved by only 3.9x. On an A100, the host link can hide transfers for only 11-38% of the activations in the transformer models we study. Existing swapping approaches, such as vDNN, SuperNeurons, and SwapAdvisor, offload tensors according to memory requirements without explicitly respecting the available link-time budget, resulting in transfer-induced stalls; block checkpointing, in contrast, leaves the host link underutilized. We present SlackSwap, which treats host-link time as an explicit resource budget. Using a single profiled iteration, SlackSwap allocates the forward-pass link budget to tensors that are most expensive to recompute, resolves the remaining memory deficit by recomputing the least expensive tensors, and schedules FIFO offloads and earliest-deadline-first prefetches without per-layer synchronization barriers. In trace-driven simulations of BERT-Large, GPT-2 XL, and a Llama-7B-style model on an A100, SlackSwap retains 96-100% of unlimited-memory GPU throughput while using half the activation memory, achieving 1.10-1.11x the throughput of the best baseline. Its plans are within 0.5% of a genetic search over 6,600-14,000 candidate plans, while requiring less than 0.4 seconds to generate.

0.32

Scheduling Data to Compute: Hierarchical Data Pipelining for LLM Training on AMD GPUs

cs.AR cs.AI ·2026-11-03 ·Gengyu Rao, Ghadeer Ahmed H Alabandi, Su Ann Chong, Thomas Huber, Kailash Gogineni +26 more
code/data similarity 0.66
Abstract

Large language models (LLM) have been the key focus of recent machine learning breakthroughs. As the model size grows exponentially, the computation needed for training is astronomical. A GPU can do a huge amount of arithmetic. However, the data its compute units need is not always available when they are ready. This data may still be in slow memory or on another GPU. While the chip waits, expensive compute sits idle, and at scale even a small drop in utilization translates into substantial cost. In this paper, we treat this waiting time as the primary bottleneck. We focus on hardware features designed for explicit data movement. These features load data from off-chip memory onto the chip, rearrange it into the layout the computation requires as it is loaded, and transfer it between GPUs. By orchestrating them, we keep a steady pipeline of data flowing to the compute units so that they remain busy. We present kernel and framework implementations that address this bottleneck using three key data-movement instructions and hardware features. The Tensor Data Mover (TDM) moves tensor data from high-bandwidth memory (HBM) into on-chip memory. Transpose-load instructions transpose tensor data into the layout that LLM computations require as it is loaded on-chip. Finally, System DMA (SDMA) and Remote DMA (RDMA) move data between GPUs over the scale-up and scale-out networks, respectively. Our results show that TDM and transpose-load provide on average 1.88x and 1.19x speedup at the kernel level, respectively. The SDMA and RDMA lead to on average 1.16x and 1.33x speedup for computation overlapped with communication. This is the first AMD LLM training system to utilize all the GPU data pipelining features. Our implementation has been integrated into open source framework and library for AMD GPUs. https://github.com/AMD-AGI/Primus-Turbo https://github.com/AMD-AGI/Primus

0.34

FlowTT: Exploiting Computation Flow Reuse in Irregular Tensor-Train Embedding

cs.DC cs.AR ·2026-09-03 ·Jongmin Seok, Chae Eun Rhee
published similarity 0.65
Abstract · 9 pages, 9 figures, 3 tables. Accepted to IEEE/ACM International Conference on Computer-Aided Design (ICCAD 2026)

Tensor-Train (TT) decomposition effectively compresses large embedding tables in recommendation models, but TT-based embedding lookup remains inefficient because partially shared computation flows across input indices are not fully reused and intermediate results are repeatedly materialized off-chip between sequential TT-core contractions. We present FlowTT, a flow-aware GPU execution framework that reformulates TT gather as a set of prefix-shared irregular computation flows. FlowTT combines flow-aligned prefix-based index grouping, a fused TT-embedding execution path with on-chip intermediate retention, and persistent-thread scheduling with chunk-based work stealing and L2 checkpointing to preserve reuse under skewed workloads. By co-designing task formation, data buffering, and scheduling with the structure of TT gather, FlowTT reduces redundant TT-core operations, global-memory traffic, and load imbalance. On Meta's synthetic recommendation benchmarks (Meta-240, Meta-480, and Meta-788), FlowTT consistently achieves the lowest latency compared to existing methods. At batch size 32,768, it reduces latency by up to 42.2% in inference and 49.2% in training relative to EcoRec, while also achieving the lowest inference peak memory usage. These results show that exposing prefix-shared computation is key to efficient TT-based embedding execution.

0.33

Activation Sparsity with Weight Approximation for Faster LLM Decoding on Offloaded Weights

cs.LG cs.PF ·2026-10-01 ·JuneHyung Kim, Sankeerth Durvasula, Nandita Vijaykumar
similarity 0.65
Abstract

Deploying LLMs on consumer-grade GPUs with insufficient memory to hold their weights can result in prohibitively slow inference, because decoding repeatedly transfers offloaded weights from system RAM or flash storage into GPU at much lower bandwidth than local GPU-memory access. Activation sparsity reduces these transfers by skipping weights associated with zero or near-zero activations. However, as more activation contributions are omitted, model quality eventually degrades rapidly, indicating that weights associated with small-magnitude activations collectively influence model quality sharply. In this work, we improve the trade-off between model quality and decoding performance when exploiting activation sparsity. Our key idea is to replace the binary choice of whether or not to read a weight with three options: fully retain it, approximate it using a compressed weight representation, or omit it entirely. SpAx skips weights associated with activations closest to zero, reads approximate weights for smaller-magnitude activations, and reads original weights for the largest-magnitude activations. Smaller-magnitude activations attenuate the errors introduced by approximate weights, while compressed weight representations require fewer bytes to be transferred. With weights offloaded to CPU memory, SpAx speeds up decoding by 3.86X on average (up to 5.57X) with 16-bit weights and 2.06X (up to 2.74X) with 4-bit weights, at a WikiText-2 perplexity increase of at most 10%. With weights offloaded to flash storage, the speedups are 3.31X on average (up to 4.81X) and 1.54X (up to 2.03X).

0.35

The Invocation Bottleneck in LLM-Based Lossless Compression: What Can Be Removed and What Must Be Traded

cs.IT cs.DB ·2026-11-04 ·Zhe Yan, Yihao Liu, Antonio Boffa, Huanchen Zhang
positioncode/data similarity 0.64
Abstract · 14 pages, 7 figures, 4 tables. Code: https://github.com/Angie-Yan/LLM-based-Data-Compression

Large language models (LLMs) compress text far better than classical compressors, but LLM-based compressors are slow, particularly during decompression. We argue that their decoding time has two fundamentally different sources. Execution redundancy, such as per-token host transfers, CPU-side coding, and token-by-token encoding, is work that the coded output does not require and can be removed without changing a single output bit. Sequential dependency, one model call per decoded token, is inherent to lossless decoding and cannot be removed by better execution, only traded for more calls or for more bits. We remove execution redundancy with a GPU-resident pipeline whose block-parallel encoding is made lossless in half precision by batch-invariant kernels, speeding up arithmetic coding by up to 5.8x in encoding and 3.0x in decoding without changing its compression rate. We then study the two ways of trading sequential dependency, speculative dual-model coding (SDMC) and multi-token single-model coding (MSMC), characterize the compression cost of predicting several tokens from a shared prefix, and identify the workloads in which fewer model calls are worth that cost.

0.58