CS Paper Radar

Learning Geometry-Aware Planning Representations for Monocular Flight with Cross-Modal Supervision

Wencan Feng, Bailing Tian, Yulin Hui, Zhiyu Li, Junjie Lu

cs.RO ·submitted 2026-10-19 14:44 UTC · v1

Abstract

Existing high-speed navigation systems for micro aerial vehicles (MAVs) commonly rely on depth cameras, stereo vision, or LiDAR to obtain explicit geometric information, while monocular cameras offer a lighter and lower-cost alternative. However, monocular flight remains challenging because RGB images offer no direct metric cues and visual appearance varies considerably across environments. We propose a geometry-aware monocular visual planning framework that predicts trajectories from two image frames, their relative pose, and the MAV state. Without explicitly reconstructing depth, the proposed method complements the downstream planning objective with feature-level geometric supervision by transferring the planning-relevant representation learned by a privileged depth expert to the RGB planner through cross-modal distillation. The framework first trains a depth-based geometric expert, then distills its planning features into a monocular branch using paired RGB-D observations, and finally adapts the planner to the downstream trajectory planning objective. This design encourages the policy to learn planning-relevant geometric features, enabling collision avoidance. We further use a 3D Gaussian Splatting (3DGS) simulator to render visual observations for data collection, paired RGB-D supervision, and simulation evaluation. The planner trained in simulation is then deployed in real-world environments without real-world fine-tuning, achieving obstacle avoidance at speeds of up to 6.5 m/s.

Closest papers

Nearest neighbours by meaning across the whole index.

Stereo-Planner: Learning Stereo-to-Trajectory Planning for Zero-Shot Sim-to-Real Quadrotor Navigation

cs.RO ·2026-10-11 ·Hongming Shen, Junjie Lu, Xun Chen, Wei Wang, Xinhang Xu +2 more
benchmarkcode/data similarity 0.79
Abstract

Existing navigation systems commonly rely on dedicated depth sensors or explicit depth reconstruction, while learning to generate trajectories directly from RGB images remains challenging due to the sim-to-real domain gap. In this work, we propose Stereo-Planner, an end-to-end vision-to-trajectory framework that enables zero-shot sim-to-real planning from stereo RGB observations. The key idea is to formulate trajectory generation as state- and scale-conditioned querying of latent stereo geometry. A Scene Representor incorporates a pretrained vision grounding foundation model to extract geometric cues shared across simulated and real-world environments, supporting generalization across visual domains. A lightweight Trajectory Decoder then translates these representations into trajectories through interleaved attention, separating trajectory-state interaction from scene-feature retrieval and incorporating the stereo baseline as a metric-scale cue. With these designs, Stereo-Planner is trained entirely on simulated data by minimizing differentiable trajectory costs and deployed directly in real-world environments without fine-tuning. Benchmark results demonstrate strong cross-scene generalization, with a 95% success rate in simulation environments at a commanded speed of 8 m/s, and competitive performance against depth-based planners using only stereo RGB observations for scene perception. Furthermore, deployment on a compact quadrotor equipped with an NVIDIA Orin NX enables autonomous flight at speeds of up to 7 m/s, with a mean onboard vision-to-action inference time of 24.27 ms. The software, simulation environments, and hardware designs will be open-sourced at https://github.com/Stereo-Planner/Stereo-Planner.

0.33

CollisionSplatting: Collision-Aware Motion Planning in 3DGS Scenes with Image-Conditioned Objectives and Adjustable Conservatism

cs.RO ·2026-09-28 ·R. Khorrambakht, Joaquim Ortiz-Haro, Stephan Weiss, Ludovic Righetti
similarity 0.76
Abstract

Incorporating dense visual information into motion planning remains challenging, as geometric planners rely on abstracted scene representations that discard visual richness, while learned visual models often lack geometric interpretability and computational efficiency. This paper introduces CollisionSplatting, a simple, modular, GPU-accelerated, probability-inspired distance metric with tunable conservatism that operates directly on standard 3D Gaussian Splatting (3DGS) scenes. When combined with learned image-conditioned reward functions, this metric enables joint geometric and visual planning by unifying collision-aware costs with image-space objectives. We integrate the metric into GPU-accelerated Model Predictive Path Integral (MPPI) and Rapidly-Exploring Random Tree (RRT) planners, and show on-par or better collision-classification performance compared to representative baselines while achieving substantially higher collision-checking throughput and significantly lower VRAM usage. Finally, we demonstrate the effectiveness of our metric in real-world vision-guided navigation and manipulation tasks, highlighting 3DGS as a practical bridge between rich perception and real-time motion planning.

0.18

AirForesight: Current-to-Future Spatial Map Imagination with Cross-Space Planning Consistency for UAV-VLN

cs.RO ·2026-08-13 ·Yutong Liu, Xiaojie Li, Mingzhu Xu, Jianlong Wu
top venue similarity 0.74
Abstract · Accepted by ACM Multimedia 2026

Unmanned Aerial Vehicle Vision-Language Navigation (UAV-VLN) requires agents to follow language instructions, infer spatial structure from sparse multi-view observations, and execute feasible 3D motion in complex outdoor environments. Despite recent progress with large language models, most existing methods still map vision-language inputs directly to actions, providing limited explicit scene grounding and future-aware spatial reasoning. We propose AirForesight, a current-to-future spatial map imagination framework for UAV-VLN. AirForesight first learns a structured current-map representation from multi-view observations. This representation is jointly supervised by current-map reconstruction and future-trajectory prediction, encouraging it to encode both present scene structure and future motion intent. Under structured causal attention, the current spatial knowledge is propagated to future-map reasoning, and the resulting current and future representations are aggregated to predict the next 3D waypoint. To make spatial imagination more relevant to navigation, we introduce a cross-space planning consistency loss that encourages directional agreement between the predicted map-space trajectory and the expert action direction derived from the ground-truth waypoint displacement. Experiments on OpenUAV and AerialVLN-S, together with extensive ablations, demonstrate strong performance and support the effectiveness and stability of the proposed framework.

0.64

EpiTransfer: Sparse, Training-Free Long-Range Depth Estimation from Temporal Monocular Aerial Frames

cs.RO cs.CV ·2026-09-27 ·Diksha Aggarwal, Rutvik Dagadkhair, Sanjana Srivastava, Bradley Denby, Kevin Kochersberger
similarity 0.73
Abstract

Reliable 3D spatial understanding is essential for autonomous navigation, obstacle avoidance, and scene reconstruction. While state-of-the-art learned depth estimation techniques achieve high accuracy in-distribution, they often generalize poorly to novel viewpoints and altitudes. This paper presents a geometrically derived, training-free depth estimation method using epipolar transfer with only two monocular images and camera pose estimates. By leveraging camera motion to synthesize a virtual stereo pair with a freely chosen baseline, our approach transforms temporal correspondence into a stereo triangulation task while mitigating geometric degeneracies inherent to direct two-view triangulation. Validated across outdoor drone flights (to a maximum range of approximately 90\,m) and indoor OptiTrack environments against LiDAR ground truth, the method achieves an indoor AbsRel of 0.092 and $δ< 1.25$ of 0.940, comparable to direct triangulation (AbsRel 0.073) while retaining valid depth over a larger fraction of challenging scenes, and substantially outperforms off-the-shelf learning-based baselines such as ZoeDepth (AbsRel 0.225) and Depth Anything V2 (AbsRel 0.570), which are not trained or fine-tuned for this domain, with no training data required.

0.16

OccPlanner: Goal-Aware Occupancy-Conditioned Diffusion Planner for PixelGoal Navigation

cs.RO ·2026-08-14 ·Binling Huang, Nianjin Ye, Xi Yang, Liang Hu, Zhou Huang +4 more
code/data similarity 0.73
Abstract · Technical report. 9 pages, 10 figures, and 3 tables

PixelGoal navigation specifies targets directly in the agent's camera view, providing a natural interface between high-level visual reasoning and low-level navigation. Depth can lift a visible target pixel into a metric PointGoal, but this estimate becomes unreliable under occlusion or sensor noise. Moreover, a PointGoal alone does not encode traversability or feasible paths around obstacles. We present OccPlanner, a goal-aware occupancy-conditioned diffusion planner that learns complementary egocentric goal and planning-oriented 3D representations through metric target and occupancy prediction, respectively. These representations condition a diffusion trajectory module to generate target-directed, obstacle-aware trajectories. For scalable geometric supervision, we introduce L3ROcc, which converts monocular RGB navigation videos into aligned 3D occupancy and trajectory annotations. We train OccPlanner on L3ROcc-processed InternData-N1 and evaluate it in closed-loop simulation across four unseen InternScenes categories and two goal-distance ranges. Across all eight settings, OccPlanner substantially outperforms existing open-source PixelGoal approaches and achieves competitive performance against PointGoal planners with direct metric-goal inputs.

0.26

M3GD: Multi-Modal Multi-View Geometric Diffusion for Camera--LiDAR Novel View Synthesis

cs.RO cs.CV ·2026-09-24 ·Yang Zhou, Jiuhong Xiao, Shizhao Ye, Long Quang, Carlos Nieto-Granda +1 more
similarity 0.73
Abstract

Robotic novel view synthesis (NVS) must recover both visual appearance and metric 3D structure, yet most generative NVS methods rely only on images, overlooking LiDAR, a complementary sensor common on robotic platforms. We present M3GD, a Camera--LiDAR multimodal representation for generative NVS that composes independently pretrained 2D image and 3D point-cloud foundation models without separately pretraining a cross-modal translator. We show that, after camera projection, frozen LiDAR and image features exhibit substantial shared spatial structure, providing a natural cross-modal representation. M3GD conditions generation on LiDAR through this structure: it combines explicit geometry statistics with learned point-cloud descriptors into view-aligned packets on the image-latent grid, injected through a lightweight residual adapter into a multi-view flow-matching generator whose latent space, decoders, and training objective remain intact. On the GrandTour dataset, M3GD improves target-view RGB and depth synthesis over an image-only version of the same backbone. Ablations show that the gains come from pixel-aligned LiDAR content and that target-view LiDAR acts as a geometric query linking the requested view to source observations. Deployment on a ground robot demonstrates practical real-world operation, with a configurable quality--cost trade-off controlled by the number of Euler integration steps.

0.13

DiffWAM: A Fast and Efficient Navigation World Action Model

cs.RO cs.AI ·2026-09-30 ·Mo Zhu, Yuze Wu, Xijie Huang, Xiao Cui, Fei Gao +1 more
benchmarkcode/data similarity 0.73
Abstract · 32 pages,10 figures, 8 tables

Pretrained video foundation models encode rich semantic and spatiotemporal priors for embodied navigation, yet converting these priors into UAV motion typically requires expensive future-video synthesis and geometric reconstruction. We investigate whether the motion implicit in future visual prediction can instead be recovered directly from the predictive representations of a frozen video model. To this end, we present DiffWAM, a geometry-conditioned navigation world-action model that directly transforms multi-level predictive features into continuous camera trajectories. Its Grid-Motion module preserves spatial-temporal motion associations, while Latent2Pose grounds them with first-frame geometry to recover metrically meaningful 3D motion. Complete video rollouts and geometric reconstruction are required only for offline supervision, eliminating future-video decoding and multi-frame reconstruction during deployment. We further introduce FastDreamer, which overlaps predictive and geometric computation with ongoing flight and performs timestamp-aware asynchronous trajectory handoff for continuous UAV execution. DiffWAM achieves a trajectory RMSE of 0.3492 m and an endpoint success rate of 74.40% on the 1,000-sample DiffWAM-1000 benchmark, while representative real-world experiments demonstrate complex behaviors including constrained traversal, orbiting, S-shaped flight, and multi-stage navigation. An onboard DiffWAM-Flash implementation further reaches 1.08 s model-pipeline latency on NVIDIA Jetson AGX Thor. These results demonstrate that predictive video representations can be efficiently grounded into continuous 3D motion, providing a direct alternative to generate-then-reconstruct navigation pipelines. Project page: https://zzmmzzm.github.io/diffwam.github.io/.

0.55

DepState-JEPA: Learning Depth-Grounded State Representation for Visual Perception and Manipulation

cs.RO cs.CV ·2026-10-21 ·Xiujian Liang, Liuyuan Na, Zehao Du, Jiacheng Xu, Weixi Song +4 more
code/data similarity 0.73
Abstract

Predictive representations for robot manipulation should connect scene geometry with the state changes induced by actions. Our intuition is that understanding what an action will change starts with understanding where things are: complementary RGB and depth observations ground a common scene representation from which to infer those changes. Guided by this intuition, we introduce DepState-JEPA, a dual-stream RGB--Depth joint-embedding predictive architecture that connects spatial understanding with action-conditioned prediction through a shared latent state, DepState. Built on V-JEPA~2.1, the framework uses depth both as a complementary observation stream and to ground both modalities in metric 3D space, aggregating shared information into DepState while retaining modality-private features for decoding. Ray-conditioned readouts predict local features without target depth; after an action-conditioned transition, the same decoders predict future RGB and depth features using the predicted state and fixed initial private features. Robot-state readouts provide recursive proprioceptive inputs; object-trajectory supervision and calibrated forward kinematics shape state learning through motion targets and joint--TCP consistency. Comparisons show stronger RGB-encoder transfer after RGB-D adaptation, feature completion, conditioned visual forecasting, and manipulation success. Within-model ablations identify contributions from depth content, metric coordinates, and future-state matching, with additional control gains from FK regularization. The project page is available at https://shawnleung-sii.github.io/depstate-jepa/.

0.26