CS Paper Radar

Ammonia-Hydrogen Phase Equilibria in Planetary Envelopes from First-Principles-Based Machine-Learning Molecular Dynamics

Akash Gupta, Austin Guo, Jie Deng

cs.LG astro-ph.EPcond-mat.mtrl-sciphysics.chem-phphysics.geo-ph ·submitted 2026-10-19 18:33 UTC · v1

Abstract

Ammonia and hydrogen are major constituents of planets within and beyond the solar system, yet how they interact in planetary envelopes is poorly known. We perform large-scale two-phase coexistence simulations of the ammonia-hydrogen system from 500 to 4000 K and 0.1 to 100 GPa, driven by machine-learning interatomic potentials trained on density functional theory calculations. From these we map the compositions of coexisting hydrogen-rich and ammonia-rich phases, and the critical curve that separates conditions of complete miscibility from those of phase separation. The critical temperature increases with pressure, from 500 K at 0.1 GPa to 2000 K near 30 GPa, and we find no phase separation at 3000 and 4000 K up to 100 GPa. The slope of the critical curve decreases substantially between 0.3 and 30 GPa, and the curve nearly flattens above about 30 GPa and 2000 K, where molecules begin to give way to atomic species. The coexistence curves are asymmetric with an ammonia-rich critical composition. For the expected envelope compositions, the phase boundary lies close to, and intersects, published thermal profiles of Uranus and Neptune, implying ammonia may be raining out in these planets today. In contrast, in warm sub-Neptunes such as TOI-270 d, ammonia and hydrogen are likely miscible in all proportions. Together with previous studies, our results suggest that silicates, water and ammonia separate from hydrogen in sequence as planets cool, with implications for their compositional, thermal and structural evolution.

Comment
20 pages, 8 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Learning ab initio phase-field models

cs.LG cond-mat.stat-mechcond-mat.mtrl-sci ·2026-10-01 ·Mengyi Chen, Peichen Zhong, Zihan Zhang, Qianxiao Li
similarity 0.64
Abstract

Simulating microstructure evolution requires quantum-mechanical accuracy and mesoscopic reach in length and time scales, a combination that no current method achieves. Classical phase-field models provide this reach, but their accuracy is limited by phenomenological free energies and mobilities. Here we develop a framework for learning ab initio phase-field models, where the mesoscopic equation is not postulated but derived from a Mori-Zwanzig projection of molecular dynamics onto species-density fields under explicit assumptions. The nonlocal free energy and mobility left unspecified by this equation are parametrized by neural networks and learned from short molecular dynamics trajectories generated with machine-learning interatomic potentials of ab initio accuracy. We demonstrate the framework on an iron-boron melt and on hydrogen-helium mixtures under planetary conditions. For iron-boron, the model shows that the melt at the FeB$_4$ composition is spinodally unstable at ambient pressure but stabilized at 10 GPa, offering a thermodynamic rationale for why FeB$_4$ has been synthesized only under high pressure. For hydrogen-helium, the model predicts the immiscibility boundary and captures droplet nucleation and growth in helium-rain simulations of a column corresponding to 2.2 million atoms, far beyond the scale of atomistic modeling at comparable accuracy. Trained across compositions and conditions, such models could provide a mesoscopic counterpart to ab initio molecular dynamics.

0.56

Equivariant learning of a transferable three-dimensional classical density functional

cs.LG cond-mat.stat-mechcond-mat.softphysics.chem-ph+1 ·2026-08-13 ·Bingqing Cheng
highly cited similarity 0.57
Abstract

Liquids exhibit collective behavior that depends sensitively on thermodynamic conditions, interfaces and confinement, yet predicting each new state commonly requires a separate atomistic simulation. Classical density functional theory offers a reusable variational description, but its central excess free-energy functional is generally unknown, and learned approximations have largely remained restricted to planar or lower-dimensional settings. Here we show that this functional can be learned directly from fully three-dimensional equilibrium density fields while preserving spatial symmetry and variational consistency, without free-energy or chemical-potential labels. A single learned functional transfers across temperatures, system sizes and statistical ensembles, and recovers structure factors, the equation of state, liquid--vapor coexistence and interfacial broadening, none of which are used as training targets. Applied to complex three-dimensional geometries, it predicts the non-monotonic force associated with formation and rupture of a solvent-depleted bridge between colloids and adsorption in an interconnected gyroid pore. These results demonstrate that equilibrium density data can be converted into a transferable thermodynamic generator connecting microscopic liquid structure to response, phase behavior and collective phenomena.

0.43

On the Theoretical Limits of Learning Unconstrained Interatomic Potentials

cs.LG physics.chem-ph ·2026-10-10 ·Prajwal Ananth, Shuwen Yue
hot direction similarity 0.53
Abstract

Machine-learned interatomic potentials (MLIPs) accelerate molecular dynamics (MD) simulations by learning the energies and forces that govern atomic motion. Recent work has shown that relaxing physical inductive biases can improve computational efficiency and predictive accuracy, raising the question of whether energy-and-force matching alone is sufficient to ensure accurate sampling. We show that, for unconstrained hypothesis classes, the relationship between prediction error and sampling accuracy is exponentially ill-conditioned in dimension. In particular, prediction errors that decay exponentially with dimension can coexist with nearly maximal total variation distance between the learned and target distributions. We identify two failure mechanisms. The first is kinetic trapping, where relaxation to an accurate learned equilibrium requires exponentially long times, even when simulations are initialized from training configurations at which energies and forces are matched exactly. The second is equilibrium mismatch, where the learned stationary distribution itself remains far from the target. Under explicit assumptions, we show that equilibrium mismatch can persist even in local, symmetry-preserving models, where small per-atom errors coexist with a distributional discrepancy that approaches its maximum as system size increases. Finally, we establish global energy-control conditions that guarantee equilibrium accuracy and identify additional conditions required for rapid relaxation.

0.27

Learning atomic interactions for the thermodynamics of liquid mixtures

cs.LG cs.CE ·2026-10-27 ·Marco Hoffmann, Sebastian Schmitt, Hans Hasse, Fabian Jirasek
similarity 0.53
Abstract · 30 pages, 13 figures, 1 table

Predictive models for activity coefficients, which describe the non-ideality of liquid mixtures, are foundational for process design and optimization. Group-contribution methods, such as UNIFAC, are computationally cheap and well established in process simulators. Modern machine learning models, such as HANNA, offer higher accuracy and broader applicability, but their integration into process simulation is expensive or even infeasible. In this work, we introduce COGNAC, a graph neural network that learns atom-level geometry and interaction parameters that depend on the molecular neighborhood and evaluates them in the UNIFAC framework. Trained on about 820,000 experimental data points, COGNAC achieves significantly higher accuracy than UNIFAC and HANNA for binary and multi-component mixtures, reduces error relative to HANNA by 13-63%, reliably predicts multi-phase equilibria and identifies azeotropes, yields interpretable parameters, and is strictly thermodynamically consistent. COGNAC evaluations run at a cost comparable to UNIFAC, thereby unlocking the potential of machine-learning models for process simulations.

0.27

Learning consistent molecular mechanics force fields from first principles

cs.LG physics.chem-phphysics.comp-ph ·2026-10-06 ·Berkay Günes, Leif Seute, Jigyasa Nigam, Frauke Gräter
published similarity 0.52
Abstract · Accepted to the ML4Molecules Workshop at NeurIPS 2026

Classical force fields (FFs) remain the workhorse for large-scale simulations even as machine-learned interatomic potentials (MLIPs) approach ab initio accuracy. They decompose total configuration energies into simple effective interactions whose parameters are traditionally assigned based on atom or bond types, enabling efficient simulations but also limiting their ability to adapt across configurations. Recent machine learning approaches have improved the accuracy and transferability of bonded parameters in these FFs by inferring them as functions of local atomic environments, but still rely on empirical nonbonded parameters for practical simulations. In this work, we introduce a unified approach, \texttt{grappa-fullFF}, which learns both bonded and nonbonded parameters \emph{consistently} and simultaneously from ab initio reference data. By incorporating physically inspired regularization via supervision of the electrostatic potential and an architecture that facilitates charge equilibration, our model recovers accurate electric response properties, achieves state-of-the-art accuracy on geometry optimization benchmarks, and reproduces the conformational sampling of both classical and existing machine-learned FFs, without relying on externally assigned nonbonded parameters.

0.32

First-Principles Atomistic Structure and Dynamics of Polyethylene During High-Pressure Radical Polymerization via Machine Learning Force Fields

cs.LG cond-mat.mtrl-scicond-mat.dis-nnphysics.chem-ph ·2026-08-22 ·Bharatha K. Gunawardana, Teresa Shah, Bicha Azizova, Deepa Ranabhat, Yizhi Song +4 more
similarity 0.51
Abstract · 15 pages, 7 figures, and 1 table

Polyethylene (PE) is one of the most commonly used synthetic polymers. While the synthesis and processing protocols for PE are well established, precise experimental assignment of microscopic structures at atomistic resolution (i.e., the position of each atom) remains largely limited to highly crystalline systems. This gap is often addressed via computer simulations using empirical interatomic potentials, which use approximate but efficient descriptions of interatomic interactions to reach the length and time scales needed to describe macromolecules. These empirical potentials typically perform well for bulk and/or collective properties but face challenges with chemical realism for complex systems, e.g., during reactive processes. In this work, we address this challenge by combining the computational efficiency of a deep potential (DP) machine-learning force field and the chemical realism of first-principles van der Waals (vdW) corrected hybrid density functional theory (DFT) enabled by a SeA high-throughput framework. Using this approach, we study the structure and dynamics of PE oligomers and polymers in an ethylene solvent under common high-pressure (supercritical) radical polymerization conditions. We found that the local solvation environment of radical-containing PE oligomers converges for chain lengths greater than (n~6), suggesting extensibility of our oligomer-trained MLFF to significantly longer polymers. We then confirmed the extensibility of these models to long PE chains by characterizing the molecular weight scaling of single-chain structure and dynamics, which showed classic good solvent behavior. Our PE MLFF retained a consistent level of fidelity and stability across a wide range of thermodynamic state points and chain lengths, at full atomistic resolution, therefore paving the way towards first-principles-based polymer structure and property prediction.

0.43

Alchemically Transferable Parameters for Variational Quantum Eigensolvers

cs.LG quant-phphysics.chem-ph ·2026-11-08 ·Jonas Motyl, Jakob S. Kottmann
similarity 0.51
Abstract · 14 pages, 8 figures

Machine-learned circuit parameters could remove one of the main bottlenecks of variational quantum eigensolvers: the classical optimization loop, with its typical barren plateaus, local minima, and costly energy and gradient evaluations, is replaced by a direct prediction. Prior work showed that machine-learning models paired with a structured circuit design can transfer across system size and structure within hydrogenic systems. The next step: Extending them to organic molecules would seem to require re-training on use-case-specific training sets. In this work, we show that this is not necessary by establishing an alchemical approach. A geometric projection places surrogate hydrogen atoms along the bond directions of the target molecule and so maps its local bonding environment onto small hydrogenic fragments. Existing hydrogenic solvers can then be reused as they are. The only new quantity is a single projection radius per bond type, which is fitted once on a small reference molecule and reused unchanged thereafter. We demonstrate the approach on the separable-pair circuit designs that have been used in prior work and extend the approach to multi-circuit approaches that span effective bases for quantum subspaces.

0.20

Universal Thermodynamic Interatomic Potentials for Crystalline Materials

cs.AI cond-mat.mtrl-scicond-mat.stat-mechcs.LG+1 ·2026-08-14 ·Juno Nam, Bowen Deng, Xiaochen Du, Luis Barroso-Luque, Benjamin Kurt Miller +1 more
similarity 0.51
Abstract

Free energies govern solid-state phase stability, yet computational materials discovery still relies largely on ground-state energies because free energy calculations require ensemble averages. We introduce the thermodynamic interatomic potential (TIP), which extends an interatomic potential from its static energy to a thermodynamically consistent Gibbs free energy model, with thermodynamic responses following from temperature and pressure by automatic differentiation. We implement TIP[UMA] using the universal potential UMA, train it on free energies from quasi-harmonic to molecular dynamics fidelity, and calibrate it to higher-resolution calculations or experiment. From a single evaluation, it returns the equation of state of a crystal and locates phase transitions among competing branches, including dynamically stabilized phases. Fine-tuning extends the model to alloy solubility limits and miscibility gaps. TIP makes the free energy as accessible as the potential energy, opening finite-temperature phase stability to high-throughput discovery.

0.04