CS Paper Radar

Test-time Adaptation for Point Cloud Denoising under Unseen Noise

Kun Jiang, Shida Fu, Fanhao Yi, Weiqing Li, Zhiyong Su

cs.CV cs.GR ·submitted 2026-10-20 00:04 UTC · v1
top venue

Abstract

Although deep learning-based point cloud denoising methods have demonstrated impressive results in recent years, their effectiveness usually degrades substantially in real-world scenarios where the noise distribution of test point clouds deviates from that of the training set. To address this challenge, we propose a test-time adaptive denoising (TTAD) framework that enables existing denoising approaches to adapt to unknown noise patterns at test time without relying on additional supervision or retraining from source data. Taking a pre-trained denoising model and a test noisy point cloud as input, TTAD first employs a residual-driven noise modeling (RDNM) module to estimate the sample-specific noise distribution through analyzing the deviation between the noisy input and its pseudo-clean version denoised by the initial model. Then, a noise-aware contrastive adaptation (NACA) module is designed to build sample-specific noisy-noisier test-time training pair from the denoised point cloud, and update the model parameters over a few adaptation steps per sample at test time through contrastive learning. Furthermore, TTAD naturally extends to a continual TTAD (CTTAD) setting, facilitating efficient progressive refinement across sequential test samples with consistent noise distributions, while reducing the computational cost per sample. Extensive experiments on both synthetic and real-world datasets demonstrate that our approach significantly improves the generalization ability of existing denoising models under unseen noise, achieving superior performance across multiple evaluation metrics.

Journal ref
Computer-Aided Design, 203: 104182, 2027
DOI
10.1016/j.cad.2026.104182

Closest papers

Nearest neighbours by meaning across the whole index.

Spatially Adaptive Noise Injection

cs.LG stat.ML ·2026-09-16 ·Frantzeska Lavda, Maciej Falkiewicz, Van Khoa Nguyen, Alexandros Kalousis
similarity 0.63
Abstract

Diffusion samplers reverse a learned noising process using either stochastic (DDPM) or deterministic (DDIM) updates, which represent endpoints of a single family controlled by a scalar noise-injection variance that is applied identically at every spatial location. This uniform approach neglects the geometry of natural images: high-curvature regions such as edges and textures, where the denoiser is uncertain, benefit from stochastic correction, whereas smooth regions, where the score is precise, are degraded by injected noise. This work investigates whether each pixel requires stochastic correction at a given timestep and introduces Spatially Adaptive Noise Injection (SANI), a novel sampling framework that dynamically adjusts noise application on a per-pixel basis. SANI integrates a probabilistic gating mechanism with a derived spatially adaptive variance, ensuring that noise is injected precisely where needed to refine complex features while preserving well-formed structures. Experimental results and decoupling ablations demonstrate that SANI consistently improves Fréchet Inception Distance (FID) over the vanilla DDPM and DDIM endpoint samplers across diverse sampling timesteps, while remaining competitive with variance-learning baselines, highlighting the importance of spatial adaptivity in diffusion sampling.

0.50

PointNDF: Cascaded Neural Displacement Fields for Point Cloud Denoising

cs.CV ·2026-10-28 ·Michael Y. Wang, Pingping Cai
publishedcode/data similarity 0.60
Abstract · 14 pages, 3 figures, 7 tables. Accepted to MMM 2027 (33rd International Conference on Multimedia Modeling)

Point cloud denoising aims to recover clean geometry from noisy 3D observations while preserving both fine surface details and the underlying spatial distribution of the points. Many learning-based methods adopt a two-stage pipeline that first extracts point-wise features from the noisy input and subsequently predicts point-wise displacements via simple regressions. However, these approaches often lack robust feature guidance and distribution-aware geometric refinement, causing them to fail at maintaining optimal point uniformity and geometric quality. To address these limitations, we propose PointNDF, a denoising framework that combines patch-level geometric context with local displacement prediction. Specifically, a Point Transformer V3 (PTv3) encoder aggregates multiscale geometric information into a global patch descriptor. Rather than directly regressing an unconstrained displacement vector, a Neural Displacement Field (NDF) fuses this global patch descriptor with per-point neighborhood features. It then predicts each displacement through bounded-vector and scale factor branches, thereby achieving a superior, more uniform point distribution. Three cascaded NDF stages propagate local features and progressively refine the point positions. Experiments on PU-Net and ModelNet10 demonstrate competitive denoising accuracy and favorable inference efficiency. The source code is publicly available at https://github.com/peridous/PointNDF.

0.37

PEEK: One-Step-Look-Ahead Exposure Bias Correction for Diffusion Sampling

cs.CV cs.AI ·2026-10-20 ·Yunwei Bai, Ying Kiat Tan, Tsuhan Chen
published similarity 0.58
Abstract · Accepted to Neurips 2026

Diffusion image generators owe much of their practical success to accurate denoising networks and strong numerical samplers. However, during sampling, the denoiser predicts the next step from flawed inputs that differ substantially from real data. This train-test gap, or exposure bias, caps image generation quality (i.e., blurry images, missing details, or distorted shapes). To mitigate the problem, we propose PEEK, a training-free deterministic sampler plugin. At each eligible denoising step, PEEK first performs a provisional one-step update, evaluates the denoiser once at the look-ahead state, and interpolates the current clean prediction with this one-step-later prediction to form the next noisy state. By taking the additional step, we obtain a generally more image like prediction from the higher-signal noisy state, mitigating exposure bias. To optimize the interpolation positions, PEEK searches for an interpolation schedule with a greedy metric-driven search made efficient by the PEEK prefix and baseline noise-schedule-rebasing caches. Across pixel-space and latent-space diffusion models with unconditional, label-guided, and text-guided settings on CIFAR-10, LSUNBedroom,I mageNet, and MS-COCO,the look-ahead correction consistently improves over baselines matched by number of function evaluations (NFE), with Fréchet Inception Distance (FID) reductions up to 49.3%. The one-time per-model calibration, the only extra cost, takes at most 2.2 minutes in our experiments. Project website is available at https://dachengruoque.github.io/PEEK-Video/.

0.33

Should All Noises Be Treated Equally: Impact of Input Noise Variability on Neural Network Robustness

cs.LG eess.SPphysics.geo-ph ·2026-09-13 ·Salma Alsinan, Maksim Makarenko, Sixiu Liu, Ali Aldawood, Ibrahim Hoteit
published similarity 0.58
Abstract · Main:(pages 1-31,15 figures), Supplementary: (pages: 32-75, 37 figures)

Geophysical data collected from active field sites are often contaminated by complex and heterogeneous noise, obscuring weak seismic events, and complicating automated interpretation. Although deep learning offers promising solutions for seismic processing, its performance is highly sensitive to the nature of training noise, especially under out-of-distribution (OOD) conditions. This study investigates the influence of noise parameters, such as type, scale, and complexity on the performance, generalization and robustness of neural networks in two geophysical tasks: first break picking and denoising. We simulate seismic-while-drilling data and apply controlled input source noise augmentation using stochastic generators to vary the noise characteristics. Different neural networks are trained on fixed noise types and scales, then evaluated across both seen and unseen noise scenarios. We incrementally increase the complexity of the noise by introducing compound noise mixtures and assess the performance of the model under increasingly challenging OOD conditions. This yields a robustness matrix that captures the generalizability of each model relative to its training configuration. Results indicate that larger noise scales boost generalization, and that effective alignment between noise type, task complexity, and architecture is key for maximizing generalization gains. In addition, training with compound noises mitigate weaknesses associated with single-noise training, acting as an additional implicit regularizer to improving robustness. These findings highlight key factors influencing model resilience in noisy geophysical environments and offer guidance for developing deep learning models that generalize effectively across diverse and unpredictable noise conditions.

0.49

ASSERT: Adaptive Stochastic Sampling for Robust Diffusion Models on Analog Compute-in-Memory Hardware

cs.CV ·2026-09-01 ·Yuannuo Feng, Yizhe Chen, Wenshuai Yao, Yuxin Xie, Ngai Wong +2 more
top venue similarity 0.58
Abstract · Accepted by ASP-DAC 2027, Tokoy, Japan

Diffusion models achieve strong image generation quality but incur high iterative denoising costs. Analog compute-in-memory (CIM) can accelerate matrix-vector multiplications, yet spatial memory variations perturb weights and accumulate during sampling. Unlike conventional neural networks, diffusion models' temporal sensitivity to hardware noise remains underexplored. We investigate diffusion inference using a noise model calibrated and validated against measurements collected from multiple physical CIM chips. Our results show that the early, high-noise denoising stage is substantially more vulnerable than the final refinement stage. A first-order trajectory analysis attributes this behavior to the repeated propagation of correlated prediction errors induced by a fixed hardware mapping. Based on this observation, we propose ASSERT, a training-free sampler that uses higher stochasticity early and smoothly transitions to deterministic denoising. The injected stochasticity changes subsequent activation trajectories and thereby reduces their alignment with persistent spatial errors. Across the evaluated settings, ASSERT achieves up to 2.58$\times$ lower FID than deterministic DDIM on high-resolution datasets and 7.68$\times$ lower FID in the CIFAR-10 step-count study, without changing model parameters or the number of network evaluations.

0.23

Denoising Textures is a Different Ballgame Altogether!

eess.IV cs.CV ·2026-10-15 ·Saptarshi Mandal, Oindrila Haldar, Chirayata Bhattacharya, Chandra Sekhar Seelamantula, Zhiwei Xu +2 more
position similarity 0.58
Abstract

The human brain effortlessly deciphers colors and textures from visual stimuli and reconstructs the world around us, yet preserving such details remains challenging in image denoising. While significant progress has been made in generic image denoising, the problem of texture denoising has remained relatively under-explored. Fine details, such as intricate patterns and repetitive structures, often suffer from over-smoothing even in deep learning based approaches for denoising. In this paper, we analyze the behavior of state-of-the-art (SOTA) denoisers on texture datasets and show that performance improvements are possible only by fine-tuning the denoisers on the texture datasets. Surprisingly, fine-tuning on texture datasets result in the models catastrophically forgetting the original dataset. These findings highlight the need for specialized treatment of textures in denoising. Since denoising quality directly impacts downstream tasks such as generative modelling, we argue that dedicated texture aware denoisers are essential for faithful texture reconstruction and synthesis.

0.18

DnNP: Denoising Input Uncertainty in Neural Processes

cs.LG ·2026-11-10 ·Fatemeh Tohidian, Chengzhi Shi, Soomi Lee, Matthew Elia, Amy Mueller +2 more
top venuecode/data similarity 0.58
Abstract · Accepted at NeurIPS 2026. 20 pages, 3 figures, 3 tables. Code: https://github.com/iSUPER-ML/DnNP

Neural Processes (NPs) are flexible meta-learning models capable of uncertainty quantification across diverse applications. However, the standard NP framework assumes access to noise-free inputs. This is unrealistic in many practical settings, where sensor noise or measurement errors are unavoidable. This discrepancy between model assumptions and real-world data can significantly degrade prediction quality and uncertainty estimates. We introduce Denoising Neural Processes (DnNPs), a principled extension of the NP framework that explicitly models input uncertainty. We train DnNPs via variational inference. DnNPs jointly learn to denoise corrupted inputs and perform meta-learning, making them robust to noisy training data. We demonstrate DnNPs' effectiveness on both synthetic and real-world datasets, showing consistent improvements in prediction and uncertainty quantification compared to standard NPs. On PM2.5 spatial interpolation from real-world air quality sensors, DnNP reduces RMSE by up to 30% and NLL by up to 73% relative to standard NPs. We also provide theoretical grounding: we show that the Bayes-optimal predictor under noisy inputs belongs to the DnNP model class, and that plug-in models with fixed observation variance incur an irreducible KL divergence gap that DnNP provably avoids.

0.52

FilterFusion: Prior-Guided Adaptive Filter Fusion for Efficient Video Denoising

cs.CV ·2026-10-15 ·Wenlong Yang, Weihang Yuan, Canran Jin, Jiahao Li, Henrik Turbell +1 more
published similarity 0.58
Abstract · Accepted by MMSP 2026

Real-world video denoising for communication systems must handle mixed degradations such as sensor noise, compression artifacts, and motion-induced inconsistency while remaining deployable under tight latency budgets. Purely deep models often achieve high accuracy but come with significant computational cost, whereas classical filters are robust and efficient but insufficiently adaptive. We present FilterFusion, a prior-guided multi-frame denoising framework that combines temporally-aware learned features with an interpretable bank of denoising branches. The model predicts a low-cost guidance signal and uses it to adaptively mix a compact set of denoising responses at the original resolution. The lightweight design uses only 109K parameters and explicitly injects temporal variance and spatial variance cues into the low-resolution controller. On CRVD (real sensor noise), it reaches 34.72 dB PSNR and 0.9330 SSIM with only 0.18 GFLOPs (network-only). Because the filter-bank operations are simple and regular (Gaussian blur, median, weighted sum), a straightforward compiled C implementation of the synthesis path achieves 17.9ms per frame (55.9 FPS) on a single CPU thread at 1080p---exceeding real-time and 122--252 times faster than lightweight CNN baselines that require over 2 seconds per frame. The results demonstrate a strong quality-efficiency-speed trade-off and a practical route to real-time denoising through low-resolution control and explicit filter-based synthesis.

0.21