CS Paper Radar

Region-Aware Multi-View Inspection Using Deep Learning and Domain-Informed Decision Fusion

Srivishnu Ethirajulu Krishnaraj, Rishikesh R. Chopade

cs.CV cs.LGeess.IV ·submitted 2026-10-21 08:29 UTC · v1

Abstract

Automated optical inspection of precision components with tiny surface defects remains challenging when different regions of the same component exhibit different defect characteristics and, therefore, different acceptance criteria. This paper presents a region-aware, dual-model inspection framework that combines instance segmentation of localized seat-region defects with image-level classification of global shaft-region anomalies. Rather than treating these two model detections as sufficient evidence for component rejection, a deterministic decision fusion layer that formalizes industrial Standard Operating Procedures is applied to the model outputs to make the final component level decision. A PLC-synchronized imaging system acquires 18 seat and 18 shaft images over a full 360-degree rotation to provide multi-view circumferential coverage. The framework was evaluated on 380 automotive fuel injector needles, covering representative operational defect types, using identical model predictions in all configurations. Direct model-output aggregation via simple union logic (where any single-view detection flags a rejection) identified all 104 non-conforming components but produced a component level false rejection rate of 57.6%. Inclusion of a complete decision layer maintained the observed non-conforming (NOK) recall of 100% while reducing the false rejection rate to 10.9%, corresponding to an 81.1% reduction in false-positive component decisions. The results demonstrate that formalized manufacturing acceptance criteria can complement sensitive visual models by translating frame-level detections into practical and traceable component-level decisions.

Comment
10 pages, 4 figures, 10 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Beyond CLIP: Calibrated (Few-Shot) Defect Detection With System One Decision Models

cs.CV cs.AI ·2026-10-30 ·Fadel M. Megahed, Ying-Ju Chen
similarity 0.64
Abstract · 10 pages, 5 figures

Cameras and vision sensors are widely used for product and process inspection in manufacturing environments. Traditionally, this process required thousands of images of both nominal and defective products to train such models. Recent research shows that vision transformer (ViT) models, such as CLIP, can reduce this requirement to 50-100 images per nominal and defective class. However, collecting even 50 defective images can be difficult in high-yield or low-volume manufacturing processes. In this paper, we examine the utility of two recently proposed structured decision models (Jev and Clef-Flash) in applications using as few as k=2 reference images per class at inference. In the process, we provide three main contributions: (a) a framework for k-shot learning of these models for image classification/inspection applications; (b) an agentic approach for automatically refining the text descriptions that guide image classification in these decision models; and (c) an approach to calibrate the resulting defect probabilities to improve their reliability for inspection decisions. We test these contributions in five manufacturing case studies. Using two reference images per class, both Jev and Clef-Flash outperform CLIP's test accuracies with the same references (0.75-1.00 [Jev] and 0.71-0.99 [Clef-Flash] vs 0.67-0.84 [CLIP]). Furthermore, we show that our agentic refinement of text descriptions significantly improves accuracy across 6 of 8 model-application combinations, and our calibration approach reduces the Brier score in 13 of the 15 model-application configurations. To support the reproducibility of our work, we provide our replication code and have created the R "decisions" package for evaluating additional models. We also provide a publicly available web app that allows practitioners to inspect their own images with no code.

0.26

Training-Free Logical and Structural Anomaly Detection via Calibrated Fusion

cs.CV ·2026-09-04 ·Changyi Li, Miao Yu, Kai Dong, Yu Xiao
published similarity 0.63
Abstract · Accepted by PRCV 2026

Industrial anomaly detection must handle two distinct defect families: structural anomalies, which manifest as local texture corruptions, and logical anomalies, which violate global rules on object count, composition, or arrangement. Existing detectors typically favor one family at the expense of the other. In particular, training-free methods effectively exploit frozen representations but lack an explicit notion of object count, while methods that reason about counts usually rely on category-specific component modeling. We show that counting ability can be introduced into training-free anomaly detection without additional training or part-level supervision. Our key idea is a normal-set calibration that aligns heterogeneous anomaly cues using statistics from normal images, enabling their direct fusion within a unified training-free framework. Built upon this calibration, our detector combines complementary frozen cues to address both logical and structural anomalies. On MVTec-LOCO, our method achieves image-level AUROCs of 89.0 and 95.9 on logical and structural anomalies, respectively, yielding a 92.5 average---the best among training-free detectors in our comparison. It remains competitive with methods requiring network training or part annotations, while its structural variant matches PatchCore on MVTec-AD (99.1 image-AUROC), suggesting that the proposed calibration generalizes beyond logical anomaly detection.

0.27

Continuity-Driven Representation Learning for Industrial Defect Detection

cs.CV ·2026-08-18 ·Minjong Kim, Hyun Jun Kim, Jeongrae Kim, Heeseung Shin, Changwon Lim
publishedbenchmark similarity 0.62
Abstract · Accepted at the British Machine Vision Conference (BMVC) 2026

Industrial defect detection differs from natural-image object detection because inspection images are captured under controlled conditions and contain large normal-dominant regions with repetitive structures. Defects therefore appear as localized disruptions of otherwise predictable patterns, while conventional detectors rely mainly on sparse bounding-box supervision, resulting in weakly constrained normal-region representations. We propose a continuity-driven representation regularization framework that exploits normal-dominant regions as dense auxiliary supervision. The framework introduces two detector-agnostic objectives: Multi-Continuity Loss, which combines 1D patch-sequence prediction and 2D masked spatial prediction, and Differencing Loss, which regularizes first-order feature variation and second-order curvature between neighboring patch embeddings. Both objectives are applied with box-derived region weighting to stabilize normal-region representations while preserving defect-related discontinuities. Experiments on two real-world industrial datasets and the public NEU-DET benchmark, using six detector architectures including YOLO-family models, MambaYOLO, and DETR, demonstrate consistent improvements over native detector baselines. In the full-data setting, the proposed regularizers improve average mAP@0.5:0.95 by up to 3.49 percentage points on Industrial Metal, 5.38 percentage points on MEA, and 5.03 percentage points on NEU-DET. Under limited-data conditions, the gains become more pronounced, with Differencing Loss achieving improvements of up to 21.07 percentage points in mAP@0.5 and 8.23 percentage points in mAP@0.5:0.95 on NEU-DET using only 25% of the training data. These results suggest that continuity-driven regularization provides an effective prior for improving industrial defect detection, particularly when annotated data are scarce.

0.31

VerdictAD: Few-Shot Anomaly Detection via Decision-Guided Refinement

cs.CV ·2026-11-02 ·Shangquan Sun, Wenjun Luo, Yuanzhi Wang, Ruiqi Li, Ruoyu Chen +2 more
code/data similarity 0.62
Abstract · Preprint with 5 tables and 7 figures. Code and experimental logs available at https://github.com/sgstq0811/VerdictAD-Jev-AD

Detecting defects in real-world industrial inspection often requires learning from only a few normal images per category. Recent few-shot anomaly detection methods have achieved strong performance by measuring feature differences between query images and normal references. However, visual differences do not always indicate genuine defects, as normal appearance variations can also produce high anomaly scores. Conversely, structural or logical anomalies may not produce strong local feature differences, making them difficult to detect. To address this limitation, we introduce VerdictAD, a training-free framework that refines existing anomaly detectors through visual decisions. Rather than replacing existing detectors, VerdictAD adopts a typed decision model to assess the query image and its local regions against a few normal references. By directly producing structured decision probabilities without text generation, the model provides complementary evidence for refining anomaly responses at different spatial scales. Building on this capability, we introduce two modules: Global Verdict Refinement (GVR) uses image-level decisions to refine the overall anomaly score, while Local Verdict Refinement (LVR) aggregates regional decisions to refine the anomaly map. Combined with a simple DINOv2-based detector, VerdictAD achieves competitive performance in one-shot and few-shot anomaly detection. More importantly, as a plug-and-play framework, it consistently improves existing anomaly detectors across MVTec AD, VisA, and MVTec LOCO AD, achieving strong results across one-shot and few-shot settings. Our code and experimental logs are publicly available at https://github.com/sgstq0811/VerdictAD-Jev-AD.

0.30

FuDU: A Fuzzy Dual-dimensional Uncertainty Framework for Streaming Active Learning in Industrial Defect Detection

cs.CV ·2026-09-02 ·Zhaoyang Wang, Haiyong Chen, Binyi Su, Xinwei Lyu
top venuecode/data similarity 0.61
Abstract · Accepted at ECCV 2026

Ensuring the reliability of deep learning models in real-time industrial defect detection is critical for high-stakes quality inspection. To mine uncertain samples within continuous industrial media streams, thereby enhancing the reliability of the detection system, this paper proposes a streaming active learning method based on the Fuzzy Dual-dimensional Uncertainty (FuDU) framework. Specifically, we first design a Prototype-based Global Uncertainty Quantification (PGUQ) module on the backbone to evaluate image-level uncertainty via normal/defective feature prototypes. A Dual-entropy defect Uncertainty Evaluator (DeUE) is then integrated into the detection head to quantify box-level uncertainty. Finally, by modeling uncertainty as systematic error, we propose a fuzzy dual-dimensional uncertainty-aware strategy that leverages fuzzy inference to fuse dual-dimensional uncertainties, enabling expert knowledge-driven adaptive sampling decisions. Comprehensive experiments demonstrate that FuDU is efficient and flexible, making it well-suited for challenging industrial inspection tasks such as the detection of nuclear fuel rod defects. Our code is publicly available at: https://github.com/wangzhaoyang-508/FuDU.

0.53

Robust Online Aero-Engine Blade Defect Detection via Dual-Alignment Test-Time Adaptation

cs.CV ·2026-09-04 ·Zhaoyang Wang, Haiyong Chen, Dongying Li, Yining Wang, Huapeng Wu +2 more
published similarity 0.59
Abstract · This manuscript is Accepted at conference PRCV 2026

Reliable visual inspection is essential for quality assurance in aero-engine blade manufacturing, where defect appearance may vary across production lines, imaging conditions, blade poses, and surface backgrounds. Such domain shifts cause a mismatch between training and deployment data and degrade the reliability of deep defect detectors in online inspection. This problem is particularly challenging because aero-engine blade images usually contain sparse defects, making pseudolabel-based adaptation vulnerable to noisy or missing predictions. To address this issue, we propose Aero-engine Blade Defect Detector (ABDD), an online adaptive detection framework based on test-time adaptation. ABDD introduces a Dual-Alignment Strategy to jointly adapt global visual style and local defect morphology by combining feature-statistics alignment with pseudo-box alignment. To reduce error accumulation from unreliable pseudo labels, an Uncertainty-aware Box Filtering mechanism evaluates pseudo boxes using classification confidence, classification entropy, and localization entropy. In addition, a lightweight Sparse Dilated Mona module enables parameter-efficient delta tuning while limiting source-domain forgetting. ABDD is evaluated on CD-AeBD and HD-AeBD under multiple domain-shift scenarios, with TTA strategies compared under a unified RT-DETR + Swin-T architecture. Experiments show that ABDD consistently improves detection robustness under domain shifts, and its practicality is further validated on an industrial inspection platform.

0.30

Cross-Scenario Industrial Defect Detection via Domain-Robust Training and Metric-Aligned Selection

cs.CV ·2026-10-14 ·Dikai Li, Weijia Wang, Yuan-Gen Wang
top venuecode/data similarity 0.59
Abstract · This paper has been accepted for presentation in IEEE ICME 2026

Automated defect detection of industrial boards must remain highly reliable under cross-scenario variations in lighting, surface contaminants, and production line conditions. This makes cross-scenario defect detection a domain generalization problem, wherein models are required to detect, localize, and classify defects across unseen scenarios while minimizing false alarms on clean boards. For the IDA 2026 Track 1 challenge, we propose a cross-scenario defect detection method that includes four complementary modules: cross-scenario robust training, small-defect-aware learning, score calibration and inference threshold selection, and metric-aligned checkpoint selection. These four modules respectively introduce cross-scenario robust normalization and DSU-style statistic perturbation with progressive random convolution, NWD and parameter-free spatial attention, the VFL learning objective, and a custom SWAD variant driven by the Track 1-oriented proxy. Experimental results demonstrate that our model achieves a Track 1 score of 0.564 with a screening score of 0.696 on the test dataset on a single RTX 4090 GPU. The code is available at https://github.com/GZHU-DVL/Dikai.

0.40

InspectorGPT: A Comparative Reasoning Enhanced VLM for Comprehensive Industrial Anomaly Detection

cs.CV ·2026-08-30 ·Weifei Chen, Honghao Zhang, Zhiyuan You, Xinyi Le
similarity 0.59
Abstract

Industrial anomaly detection is a critical component of modern manufacturing. Most traditional unsupervised methods rely on modelling normal feature distributions, inherently limiting generalization to unknown categories. To improve generalizability, some recent methods incorporate vision-language models (VLMs) for zero-shot detection via text prompts. However, we observe that reasoning-oriented post-training can cause anomaly discrimination to collapse, with some fine-tuned models performing worse than their base VLMs. Existing methods also provide only textual decisions or coarse boxes, without pixel-level segmentation. A more explicit detection principle comes from human inspection: anomalies are identified by comparing a query image with a defect-free reference. Inspired by this, we propose InspectorGPT, a VLM framework centered on comparative reasoning. Given a normal reference and a query image, InspectorGPT compares them to identify discrepancies and perform multiple inspection tasks with detailed reasoning. We internalize this capability through Chain-of-Thought (CoT) fine-tuning and Group Relative Policy Optimization (GRPO) with tailored, verifiable rewards. We further introduce InspectorGPT-Seg for pixel-level anomaly masks. Segmentation supervision improves anomaly discrimination but weakens semantic reasoning, while joint training fails to balance them. We therefore train the two branches separately and combine them through task-vector fusion. Extensive experiments demonstrate superior multi-dimensional performance and generalization to unseen benchmarks, validating comparative reasoning for comprehensive industrial inspection.

0.42