CS Paper Radar

Spacetime Splines for Adaptive Robot Motions

Boxuan Zhang, Ante Marić, Sylvain Calinon

cs.RO ·submitted 2026-10-21 15:01 UTC · v1

Abstract

Movement primitives commonly represent robot mo- tions through basis functions indexed by time or phase. Inspired by spacetime representations employed in physics, we propose a spline-based formulation in which spatial geometry and temporal progression are represented within a common set of continuous variables. The proposed method jointly estimates a shared Bezier curve, while allowing spatial and temporal model complexity to be adapted independently (e.g., demonstration-specific phase modulation). As use case, we consider an alternating optimization process that simultaneously estimates path intervals observed in partial demonstrations. Simulation experiments demonstrate accurate joint recovery, refinement through modifications in model complexity and continuity, and improved robustness to variance in the demonstration set. Finally, we demonstrate online retiming and synchronization capabilities in a patient-turning task assisted by a robot, evaluated with a physical manikin.

Closest papers

Nearest neighbours by meaning across the whole index.

Anchor 1: Precise and Stable Humanoid Control for Whole-Body Manipulation

cs.RO ·2026-10-30 ·Archon Robotics, :, Caojun Wang, Checheng Yu, Gangcheng Jiang +22 more
benchmark similarity 0.65
Abstract

Humanoid controllers have acquired increasingly diverse motor skills, yet translating these capabilities into precise and stable whole-body manipulation remains challenging. Manipulation tasks are sensitive to execution deviations -- even small errors or unintended steps can cause failure. Introducing Anchor 1, a whole-body controller for precise and stable whole-body manipulation, together with a benchmark spanning diverse coordination demands. Anchor 1 adopts calibrated sparse motion references to preserve task-relevant human motion structure without online joint-space retargeting, leaving kinematic freedom for precise control. To guide this freedom towards stable, physically plausible whole-body coordination, we shape the training distribution through offline curation of robot motions paired with these calibrated sparse references. We further introduce explicit error feedback decoupled from motion encoding, improving control precision while supporting flexible command interfaces. To achieve a systematic evaluation of these capabilities, a benchmark is proposed to assess precision, sustained execution stability, and reachability across diverse whole-body coordination demands. Evaluations in simulation and on hardware show stronger precision and stability across all evaluation tracks. Under the most strict real-world global scoring setting, Anchor 1 achieves a 30\% to 80\% decrease in tracking error with fewer look-ahead inputs, and without retargeting compared to all existing controllers. Downstream experiments demonstrate more efficient teleoperated data collection and higher task success using the same deployment pipeline as well. We believe Anchor 1 supports precise and stable whole-body control as a practical basis for humanoid task execution.

0.18

Shared Execution-Clock Drifting Policy for Dynamic Precision Manipulation

cs.RO ·2026-09-20 ·Zhenchen Dong, Qingran Wu, Jinna Fu, Jiaming Wu, Fulin Chen +2 more
code/data similarity 0.62
Abstract · 8 pages. Project page: https://secd-anonymous-ewn.pages.dev/

Manipulation under time constraints requires both accurate actions and an execution rhythm that matches the evolving scene. This becomes critical when a robot must intercept moving objects or complete a sequence of adjustments before a deadline. Although one-step policies reduce generation cost, their directly predicted action sequences leave temporal allocation implicit. We propose Shared Execution-Clock Drifting (SECD), which makes execution rhythm an explicit part of one-step action generation. Conditioned on an observation and a latent sample, the policy jointly predicts a progress-indexed action curve and a shared monotone clock that maps fixed control times to locations on the curve. Demonstration-derived alignment anchors this decomposition, which is trained jointly through drifting on the decoded actions. The resulting policy retains a fixed-rate control interface and requires one network evaluation. We evaluate SECD across four real-robot tasks with inference on NVIDIA Thor. Across 300 trials, it achieves 77.00% task-averaged success and outperforms the evaluated one-step baselines on every task, including 91% success in cup retrieval from a 16 m/min conveyor and 54% in restoring and folding a crumpled shirt within 90 s. A fixed-clock variant reaches 79% on the same conveyor protocol. Complementary state-based RoboMimic experiments, including cross-seed ablations on Transport and Square, further support the joint design of the temporal representation and demonstration alignment. Project page: https://secd-anonymous-ewn.pages.dev/

0.36

Dissecting Motion-Prior Regularization for Data-Scarce Robotic Insertion

cs.RO ·2026-09-15 ·Ning Hu, Shuai Li, Jindong Tan
published similarity 0.62
Abstract · Accepted for poster presentation at the IROS 2026 Workshop on Industrial Applications of Robot Learning (IARL). 4 pages, 2 figures, 1 table

This study asks whether training-time motion-prior regularization can improve insertion success when a diffusion policy is learned from only 15 demonstrations. Minimum jerk discourages abrupt changes in predicted translational acceleration; speed-curvature regularization instead couples movement speed to path geometry. These are candidate mechanisms for task completion, not safety guarantees. We compare the priors individually and jointly, neither prior, and generic smoothness, with 80 real-robot trials per setting pooled over four recorded condition classes. Joint and minimum-jerk-only settings each achieved 70/80 successes (87.5%), versus 69/80 (86.3%) for speed-curvature only, 66/80 (82.5%) for neither prior, and 67/80 (83.8%) for generic smoothness. Success rates and Wilson 95% confidence intervals are visualized for direct comparison. Joint regularization exceeded neither by 5.0 percentage points but provided no observed gain over minimum jerk alone. The results motivate minimum jerk as the simpler candidate for replication, without establishing synergy, biomechanical specificity, improved safety, or distribution-shift robustness.

0.36

LieSpline-DP: Lie-Group B-Spline Diffusion Policy for Smooth Robot Manipulation

cs.RO ·2026-09-14 ·Erxuan Xie, Bang Liu, Pingyun Nie, Xingkai Liu, Zhuang Fu +1 more
similarity 0.61
Abstract · 8 pages, 6 figures, 3 tables

Diffusion Policy (DP) is a powerful Learning from Demonstration (LfD) method for robotic manipulation, yet it suffers from discontinuous and non-smooth trajectories. Spline-based action representations promote smooth motion within individual action chunks, but existing spline-based methods neither guarantee cross-chunk $C^2$ continuity nor account for the group structure of $\mathrm{SE}(3)$. We therefore propose LieSpline-DP, a Lie-group B-spline diffusion policy that generates end-effector trajectories directly on $\mathrm{SE}(3)$ and couples consecutive plans by sharing their boundary control poses, ensuring $C^2$ continuity throughout the entire planned trajectory. Across three real-robot tasks, LieSpline-DP produces lower trajectory jerk and higher task success rates than the DP baseline. The gains are particularly pronounced in real-world tasks involving liquids and flexible objects: in our real-robot experiments, LieSpline-DP achieved a 100% success rate on both pouring and bucket hooking, whereas the DP baseline achieved only 10% and 30%, respectively.

0.33

Vela: Scaling Vision-Language-Action Models with Adaptive Action Curve Parametrization

cs.RO cs.AI ·2026-10-04 ·Yifan Li, Jiaxu Wang, Dongming Wu, Yicheng Jiang, Ryan Ji +2 more
code/data similarity 0.61
Abstract

Most vision-language-action models represent future motion as fixed-rate action chunks, tying temporal resolution and prediction horizon to a fixed output budget. This pointwise representation wastes capacity on highly correlated neighboring actions, leaves temporal continuity and smoothness to be learned implicitly, and forces a tradeoff between long-horizon coverage and the local precision required for contact-rich manipulation. To address these limitations, we introduce Vela, a vision-language-action foundation model that represents future robot behavior as continuous trajectories. Vela combines a compact spline-based action representation with motion-dependent temporal support and a shared action interface for heterogeneous embodiments, allowing a fixed output budget to adapt its temporal resolution across motions. We pretrain Vela on large-scale multi-embodiment robot data and evaluate it on LIBERO-X, EBench, and two real-world long-horizon tasks, egg-cake cooking and potato shredding, obtaining promising results across simulation and physical manipulation. These results highlight the potential of continuous action representations as a foundation for future embodied foundation models. Project page and more results: https://clementine24.github.io/Vela/ .

0.53

Motion Retargeting with Spatiotemporal Preferences for Humanoid Loco-Manipulation

cs.RO ·2026-10-21 ·Xiongbo Shi, Shihang Du, Zongyou Yu, Ziyu Lin, Ao Zhou +4 more
similarity 0.61
Abstract

Human motion retargeting bridges the embodiment gap between humans and humanoid robots by converting human demonstrations into reference trajectories for whole-body control and loco-manipulation. For object-interaction tasks, successful execution depends on accurately preserving body--object relations at critical stages. However, uniform per-frame iteration budgets do not account for these localized accuracy requirements, limiting the computational efficiency of retargeting. To address this limitation, we present Spatiotemporal Retargeting (STR), which uses keyframes and key body parts to allocate optimization effort. Specifically, a vision-language model selects relevant motion signals and body parts, and keyframes are identified from changes in the selected signals. Based on these selections, STR assigns additional solver iterations to keyframes and higher interaction weights to the selected parts. To further improve contact fidelity, we introduce Mechanics-Aware Contact Anchoring (MCA) to refine object-surface contact positions using an approximate object-wrench model while retaining the selected surface directions. Building on the resulting references, we develop Spatiotemporal Reinforcement Learning (STRL), which combines adaptive key-stage sampling with a contact-position reward based on target proximity for downstream control. Simulation experiments on a Unitree G1 and real-world experiments on a Unitree R1 demonstrate that STR improves geometric contact coverage and continuity at lower computational cost, while the resulting references improve downstream task completion across diverse object-interaction motions.

0.17

RESPLE2: Inertial-Informed Recursive Non-Uniform Spline Estimation for Multi-Sensor Odometry with Global Refinement

cs.RO ·2026-10-27 ·Ziyu Cao, William Talbot, Song Li, Pakpong Chirarattananon, Fredrik Gustafsson +2 more
code/data similarity 0.60
Abstract · 18 pages

We present RESPLE2, a recursive multi-sensor state estimation framework using non-uniform B-splines for 6-DoF motion representation. By exploiting the knot-clamping boundary property, we propose a theoretically grounded mechanism for exact control-point prediction directly informed by inertial kinematics along the trajectory, with knot placement adapted to motion and measurement availability. Within an iterated extended Kalman filter, we perform this prediction using a subset of inertial measurements. A subsequent reset step preserves trajectory consistency as the knots extend. The update step further incorporates heterogeneous sensor measurements at their native timestamps through continuous-time observation models, supporting flexible combinations of LiDARs, cameras, inertial measurement units, and leg kinematics. We further develop a lightweight global optimization module that directly refines non-uniform B-spline control points by incorporating loop-closure constraints derived from LiDAR-visual cues. We conduct extensive evaluations on public and experimental datasets across handheld, tracked, legged, and hybrid aerial-legged platforms, covering highly dynamic maneuvers with extreme accelerations. Compared with state-of-the-art multi-sensor odometry systems, RESPLE2 achieves competitive or superior estimation accuracy and robustness in the corresponding sensor configurations, particularly under aggressive motion, while maintaining real-time operation. We publicly release our code and experimental datasets at https://github.com/ASIG-X/RESPLE2.

0.40

Beyond Retargeting: Low-Latency and Robust Humanoid Whole-Body Teleoperation with Learned Atomic Motion Primitives

cs.RO ·2026-10-06 ·Xiayan Xu, Jiyu Yu, Xingzhou Chen, Siyi Qian, Zongyu Ma +3 more
code/data similarity 0.60
Abstract · This paper is withdrawn pending acquisition of the required data-use license and completion of the company’s internal open-source complian…

Humanoid whole-body teleoperation translates human motion into stable robot behavior in real time. Existing systems typically rely on online motion retargeting to bridge human--robot morphological differences, but this process adds latency and can produce physically infeasible targets. Meanwhile, diverse, noisy, and partial human-motion observations often fall outside the training distribution, potentially causing unstable robot behavior. We propose a retargeting-free policy that maps raw human motion directly to robot joint commands in a single forward pass, eliminating online kinematic adaptation. To improve robustness, we learn a codebook of full-body motion primitives that projects out-of-distribution observations onto plausible motion prototypes and recovers full-body motion from partial inputs. Experiments on a Unitree~G1 in simulation and on hardware, using virtual reality, optical mocap, text-to-motion generation, and monocular video inputs, show that our method outperforms baselines in latency and robustness.

0.30