CS Paper Radar

From Reasoning to Action: Benchmarking Frontier AI Models on LIBERO-10 Robot Manipulation Tasks

May Espinola, Qifan Zhang, Yu Xiang

cs.RO cs.AI ·submitted 2026-10-21 17:11 UTC · v1
benchmarkcode/data

Abstract

Recent advances in frontier AI models have demonstrated remarkable capabilities in visual understanding, reasoning, planning, and tool use, raising the possibility of using general-purpose AI models for robot manipulation without task-specific training. However, their manipulation capabilities have not been systematically evaluated on standardized robotics benchmarks. In this report, we present a unified closed-loop manipulation framework for evaluating frontier AI models on the LIBERO-10 benchmark. Our framework enables models to control a robot directly through visual observations, robot proprioception, and structured tool calls, primarily by specifying target end-effector poses and gripper commands, without task-specific fine-tuning or pretrained manipulation skills. We evaluate six frontier AI models, including GPT-6 Astra, GPT-6.1 Sol, GPT-6 Luna, Claude Opus 5, Claude Opus 5.5, and Gemini-4 Argon, across three reasoning effort levels, resulting in 18 configurations and 1,800 evaluation episodes. Our results show that GPT-6 Astra achieves the highest success rate of 44%, followed by Gemini-4 Argon at 43%. Increasing reasoning effort generally improves manipulation performance, but the benefits vary across models and come at additional inference cost. We also observe substantial differences across tasks, with models performing relatively well on object placement tasks but struggling with precise spatial arrangements and complex multi-step interactions. These findings demonstrate both the potential and limitations of frontier AI models for robot manipulation, highlighting the challenges of translating reasoning capabilities into reliable physical actions. We release our evaluation framework and experimental results to support reproducible benchmarking and future research on reasoning-based robot manipulation.

Comment
17 pages, 6 figures, 8 tables. May Espinola and Qifan Zhang contributed equally. Project page: https://irvlutd.github.io/LLM-LIBERO/ Code: https://github.com/IRVLUTD/LLM_LIBERO

Closest papers

Nearest neighbours by meaning across the whole index.

Large Multimodal Models for Direct Robot Control: GPT-6 as a Beginning

cs.RO ·2026-10-20 ·Youwei Zhou, Bohan Hou, Yankai Fu, Yaoxu Lyu, Yifan Ye +8 more
benchmarkhighly cited similarity 0.81
Abstract

Recent advances in visuospatial understanding and agentic reasoning enable direct robotic manipulation with general-purpose multimodal models, but their embodied capabilities remain poorly understood. This paper systematically evaluate GPT-6 Astra for closed-loop robotic manipulation using a lightweight agent execution framework. We first probe three fundamental embodied capabilities-depth perception, embodied in-context learning, and tactile understanding-and demonstrate that the model can exploit depth information, acquire simple manipulation strategies from contextual demonstrations, and use tactile feedback to correct its actions. We then evaluate GPT-6 Astra across five established manipulation benchmarks along six capability dimensions. Despite competitive performance on several benchmarks-26.92\% success on RoboDojo and 76.0\% on RoboTwin 2.0-our analysis reveals a pronounced gap between semantic reasoning and physical execution, particularly in consequence-aware action planning, precision, and complex motion coordination. To further examine these limitations, we introduce LIBERO-GeoMotion, a new benchmark of geometry-constrained tasks that require precise pose alignment, coordinated translation and rotation, and anticipation of physical action consequences. GPT-6 Astra achieves only 11.1\% zero-shot success, exposing the difficulty of translating spatial understanding into physically feasible motion. Real-world experiments corroborate these findings: zero-shot execution is feasible for simple tasks, yet persistent deficits remain in motion feasibility, precise control, and physical safety, while substantial inference latency further hinders practical deployment. Overall, our results characterize the emerging embodied capabilities of general-purpose multimodal models and delineate the key challenges toward safe, efficient, and reliable robotic manipulation.

0.38

AgentRoboCritic: Understanding the Capability of Frontier Agents on Direct Robot Control

cs.RO cs.CLcs.CV ·2026-11-19 ·Yiyang Du, Yuxuan Kuang, Qitao Zhao, Yixuan Wang, Zhanqiu Guo +5 more
benchmarkcode/data similarity 0.78
Abstract · 28 pages. Project page: https://adu2021.github.io/blog/AgentRoboCritic/

Frontier multimodal language agents such as GPT-6 Astra have demonstrated strong capabilities in controlling robots directly via low-level numerical actions without high-level primitives. However, existing benchmarks report only episode-level success rates, which show neither how these agents succeed nor where they fail. In this paper, we present a systematic action-level analysis of frontier agents on direct robot control across 12 manipulation benchmarks. We introduce AgentRoboCritic, an intent-grounded critique framework in which the policy agent states a local intent alongside each action, and a critic evaluates the action's outcome and failure mode against this intent. Our action-level analysis demonstrates the promising capabilities of frontier agents on direct robot control, including closed-loop recovery from local execution failures, reliable semantic grounding across diverse scenes, and strong zero-shot manipulation without task-specific adaptation. It also identifies their current limitations, including task-relevant physical execution bottlenecks such as grasping and alignment, and uneven recovery across failure modes. Finally, we validate our critic on a 400-action human-annotated benchmark and release a dataset of 12,844 annotated actions alongside a fine-tuned open-source critic, Muse-Glimmer-30B, whose failure-mode accuracy rises from 32.58% to 74.24%, enabling low-cost action-level analysis.

0.33

LIBERO-Agent: Evaluating General-Purpose Agents for Direct Embodied Manipulation

cs.RO ·2026-09-30 ·Zijie Diao, Yitong Chen, Sicheng Xie, Tianyi Lu, Wujian Peng +5 more
benchmarkhighly cited similarity 0.77
Abstract

General-purpose agents can plan, use tools, and revise their behavior from feedback, but it remains unclear whether these capabilities transfer from digital environments to embodied manipulation. To investigate this question, we introduce LIBERO-Agent, an agent-native benchmark for evaluating these agents in robot manipulation tasks. Rather than asking agents to submit task-level Python control programs or operate through high-level robot skills, LIBERO-Agent provides an interactive robotic environment where agents can select which observations to inspect, process them with their own tools, and issue native action commands. LIBERO-Agent integrates 200 tasks into a common interaction framework and provides a 30-task primary suite that separates perception, short-horizon execution, and long-horizon composition. Results reveal a pronounced reliability gap: while agents perform well on perception and easy short-horizon tasks, their performance degrades substantially on hard short-horizon and long-horizon tasks. Richer observations improve short-horizon manipulation, while demonstration benefits depend on the agent and format. Among these agents, GPT-6 Astra achieves the strongest overall performance. Further analysis shows its major advantage lies in mechanism interaction, especially when sustained physical contact is needed, while its remaining failures stem from cross-stage interference and geometric errors.

0.41

RoboARCade: Benchmarking Agentic Robot Control

cs.RO ·2026-11-05 ·Satvik Sharma, Hengyuan Hu, Mihika Kamat, Dorsa Sadigh, Jeannette Bohg
benchmarkcode/data similarity 0.76
Abstract

Improvements in multi-modal capabilities have enabled agents to act directly as robot policies, a setting we refer to as agentic robot control (ARC). We introduce RoboARCade, a benchmark of long-horizon manipulation tasks across three embodiments designed to test in-context adaptation, memory, and reasoning for precise control. The tasks build on existing open-source benchmarks, which we make harder by widening the range of initial conditions. RoboARCade is easy to use and extend: all tasks run on a single simulation backend, MuJoCo, each task is a self-contained data pack, and agents connect through interchangeable interfaces, so new tasks, agents, and interfaces can be added independently. The benchmark separates leading agents: GPT-6 Astra achieves 49.8% compared with 43.6% for Claude Fable 5.1, leaving substantial room for improvement. Comparing two interfaces, we find that a richer visual interface adds only 1.5 to 6.8 points at 1.7 to 2.3 times the cost. Failures stem mostly from choosing a poor manipulation strategy or executing a good one imprecisely, rarely from misunderstanding the scene, and agents incorrectly claim success on 24% to 39% of attempted subtasks. Agents can also improve without human input: one successful demonstration in context raises Astra's score from 53.5% to 73.0% on a five-task subset, and a prompt the agent writes and revises itself reaches 72.0%. Code, videos and full traces are available at roboarcade.org.

0.17

CodeActionBench: Evaluating Agentic Code-as-Policy for Embodied Manipulation

cs.RO cs.AI ·2026-09-27 ·Yiheng Lyu, Xueying Jiang, Wenhao Li, Shijian Lu, Gongjie Zhang
benchmarkhighly cited similarity 0.76
Abstract · 28 pages including references and appendices, 10 figures. Project website: https://codeactionbench.org

How well can general-purpose multimodal models turn visual understanding and reasoning into embodied manipulation via executable code? We introduce CodeActionBench, a benchmark of 25 manipulation tasks that evaluates this capability through agentic Code-as-Policy. Without task-specific fine-tuning, demonstrations, external specialist perception or grasp modules, privileged scene state, or predefined task policies, agents should select visual evidence, form task-relevant 3D estimates, construct manipulation targets, and iteratively execute and revise their policies. A shared robot API provides RGB observations, calibrated geometric operations, robot feedback, and bounded motion, leaving task-dependent decisions to the evaluated agent. Fixed task instances, resource budgets, and a hidden physical-outcome verifier support controlled comparisons across models and harness configurations. Extensive evaluations across nine configurations and 675 attempts achieve success rates ranging from 2.7% to 73.3%. The strongest configuration, GPT-6 Astra with Codex CLI, solves 22 of 25 tasks at least once in three attempts, demonstrating the best performance while still leaving substantial room for improvement. Trajectory analyses reveal difficulties in spatial alignment, object retention, and completion judgment, including task failures despite successfully completed motions. CodeActionBench provides a controlled testbed for measuring how general-purpose models translate their capabilities into manipulation behavior and for examining typical failure scenarios in that process.

0.53

Frontier LLMs Enter the World of Robotics: A Cross-Model Evaluation on RoboColiseum

cs.RO ·2026-10-20 ·Da Huang, Jichao Wang, Junhui Wu, Tong Ran, Linting Guo +6 more
highly cited similarity 0.75
Abstract

Recent studies have explored the potential of multimodal large language models for robot control, yet the models' embodied capabilities remain insufficiently characterized across models, tasks, and execution settings. We conduct a multidimensional comparative evaluation on RoboColiseum across four tracks: Instruction Following, Spatial Reasoning, General Manipulation, and Robustness. We implement Agent2Act, a control harness that integrates GPT-6 Astra, GPT-6.1 Sol, Claude Opus 5.5, and Gemini 4 Argon into the evaluation environment through shared observation, action execution, and feedback interfaces. Under common task settings and scoring criteria, all four models exhibit a consistent capability profile: high instruction-following scores, with three approaching perfect performance; strong spatial reasoning; and general manipulation scores below those of the other three tracks. Within the evaluated configurations, Astra leads instruction following and robustness, while Opus leads spatial reasoning, general manipulation, and overall performance. These results reveal complementary strengths across models and a persistent gap between task understanding and reliable physical execution. Component comparisons on selected tasks further show that harness design affects task success, planning cost, and execution time. Additionally, case studies with Astra examine whole-body coordination, manipulation across robot embodiments, precision manipulation, dexterous-hand manipulation, and real-robot tasks, providing further insight into the model's capabilities and limitations across embodied tasks.

0.38

DexArena: A Unified Benchmark for Long-Horizon Dexterous Manipulation

cs.RO ·2026-11-02 ·Haonan Ping, Jianshu Hu, Yimin Wang, Yi Zhu, Pai Liang +10 more
benchmarkcode/data similarity 0.75
Abstract · Project page: https://sipair-elastic.github.io/DexArena-website/

Long-horizon dexterous manipulation remains a fundamental challenge for robot learning, requiring the composition of multiple skills, precise bimanual coordination, generalizable visual understanding, and robust skill transitions. Yet existing manipulation benchmarks largely emphasize isolated skills or support only a limited range of end-effectors, making these capabilities difficult to evaluate systematically. We introduce DexArena, a benchmark designed to evaluate learning and generalization in long-horizon bimanual dexterous manipulation. DexArena features 10 long-horizon tasks and 30 stage-level tasks spanning diverse household and industrial scenarios. Each long-horizon task is composed of explicitly defined stages with physically grounded success conditions, enabling reliable evaluation of both intermediate progress and end-to-end task completion. A unified benchmark interface and verified human-teleoperated demonstrations enable testing different policy learning algorithms, with standardized simulation configurations, scene randomization, trajectory replay, and task-level evaluation. Through extensive baseline experiments, we identify substantial challenges in precise manipulation, generalization to scene variation, and skill composition. DexArena establishes a challenging and reproducible benchmark for developing robot learning methods that move toward generalizable long-horizon dexterous behavior.

0.23

Alignment Drives Reuse: Learning Generalizable Robot-Use Agents from Heterogeneous Experience

cs.RO ·2026-11-19 ·Ziyue Wang, Yaopeng Yang, Liyi Zhou
similarity 0.75
Abstract

Vision-language models (VLMs) demonstrate broad generalization across tasks and domains. However, comparable generalization in robot manipulation remains challenging. Heterogeneity in robot embodiments, task formulations, geometric conventions, and action interfaces fragments interaction experience across benchmarks and hardware. We rethink robot skill learning through alignment: Can heterogeneous interactions across benchmarks and embodiments jointly improve one shared skillset for robot manipulation? We propose UniCraft, a framework for learning robot manipulation skills by aligning heterogeneous settings. Specifically, UniCraft represents observed scene geometry using consistent coordinate conventions and aligns sensing and control interfaces across robots. It organizes tasks from different benchmarks in a canonical format, allowing interaction feedback to jointly refine shared skills and the orchestration policy that guides their selection and composition, without any demonstrations or model weight updates. We interleave tasks from 3 benchmarks and 6 embodiments, collecting 2,700 learning rollouts per agent model. During training, UniCraft improves pooled task success on unseen scenarios and tasks by 9-28 percentage points on LIBERO-PRO, 10.8-13.3 on RoboTwin 2.0, and 3.1-14.4 on RoboCasa365 (Epochs 1-3). After training, with the learned skills frozen, UniCraft demonstrates zero-shot transfer across 4 new robot embodiments and 5 additional agent models on robosuite and RoboDojo.

0.17