CS Paper Radar

ConQEC: Concolic Testing for Quantum Error-Correcting Code Implementations

Zihao Li, Ji Guan, Mingsheng Ying

cs.SE quant-ph ·submitted 2026-10-22 15:40 UTC · v1
top venue

Abstract

Quantum error-correcting code (QECC) implementations are hybrid software-control systems: measured syndromes drive decoder dispatch, recovery actions, and logical checks. Existing QECC verification techniques can prove formal obligations, and general quantum testing can expose final failures, but developers still lack a scalable testing workflow that generates concrete faults and explains where a QECC repair path first diverges. This paper presents ConQEC, to our knowledge the first concolic testing framework for QECC implementations. By combining concrete (Pauli) fault replay with symbolic repair-path constraints, ConQEC generates tests that expose not only final logical failures but also fault--syndrome--decoder--recovery (FSDR) diagnostics: the injected fault, observed syndrome, decoder decision, recovery action, oracle result, and earliest divergent stage. Its symbolic encoding of Pauli faults, syndrome predicates, decoder and recovery relations, and oracle checks enables this diagnostic workflow to scale beyond exponentially increasing amplitude-level quantum-state reasoning. We implemented ConQEC and evaluated it on generated source-level QECC families and public QECC artifacts with up to thousands of qubits. ConQEC detects the seeded bug in every experimental case and reports a replay-valid, fault-localizing FSDR witness for each.

Comment
12 pages. Accepted at the 49th IEEE/ACM International Conference on Software Engineering (ICSE 2027)

Closest papers

Nearest neighbours by meaning across the whole index.

QuSema: Detecting Silent Bugs in Quantum Libraries via Quantum-knowledge-enhanced Agents

cs.SE cs.AIquant-ph ·2026-10-07 ·Yujin Song, Kaining Zhang, Qixin Zhang, Shuai Wang, Pingchuan Ma +1 more
benchmark similarity 0.78
Abstract

Quantum libraries are now critical infrastructure for quantum algorithm development, yet their correctness remains difficult to test. Existing testing techniques mainly rely on failure-based or comparison-based oracles, exposing bugs only when executions fail, violate runtime checks, or disagree with another implementation. Their applicability is limited when suitable execution-based oracles are unavailable, leaving some silent bugs undetected. Such missed bugs can produce incorrect results that propagate into experimental conclusions, simulation studies, and algorithmic designs. Here we present QuSema, an autonomous testing agent for finding silent bugs in quantum libraries. QuSema uses constraints from quantum semantics and documentation as a source-level semantic oracle to assess whether implementation logic can produce invalid outputs from valid inputs. It operates through an agentic loop that repeatedly inspects library API documentation and source code, reasons about the intended behavior of quantum operations, identifies potential semantic deviations, and validates them by generating executable tests through library APIs. Guided by quantum-domain reasoning, QuSema turns high-level behavioral mismatches into concrete, user-triggerable bug reports, enabling it to uncover non-crash defects. We implement QuSema for Qiskit and PennyLane. On a benchmark of 20 historical silent bugs, QuSema achieves higher mean bug relocation counts than Claude Code and Codex, with the DeepSeek configuration costing less than Claude Code. QuSema also discovers 40 previously unknown bugs confirmed by the developers, including 30 silent bugs.

0.04

Are We Testing the Wrong Quantum Bugs? A Study of Fault Representation Gaps in Quantum Software Testing

cs.SE cs.PL ·2026-10-15 ·Asif Mohammed Saad, Ahsanul Ameen Sabit, Jonah Brandenburgh, Jiyuan Wang, Qian Zhang +1 more
similarity 0.77
Abstract

Quantum software relies on compilers, intermediate representations, and execution frameworks that transform programs before execution. Faults in these components can change the behavior of otherwise correct quantum programs. Yet quantum testing techniques are often evaluated using mutation-generated faults and curated bug benchmarks. We investigate how well the faults represented by these artifacts reflect those encountered in modern quantum software. We audit four quantum mutation-testing tools and three curated bug benchmarks, and collect 410 verified bugs from ten quantum software repositories over two years. We classify faults from all three sources into a common taxonomy of 56 bug families and compare their representation across mutation operators, curated benchmarks, and recent real-world bugs. The mutation tools support 20 bug families, and curated benchmarks add 15 more. Yet only 56 of the 410 real-world bugs (13.7%) belong to families represented by either source; the remaining 354 (86.3%) belong to families absent from both. The largest unrepresented families concern compiler transformations (66 bugs), type handling (53), and input validation (47). Unlike local gate or statement changes, these faults often depend on intermediate representations, compiler pipelines, input types, or dependency versions. Existing mutation operators primarily modify circuits and program constructs, whereas many real-world faults arise in the compilers, representations, and framework interfaces that process them. Addressing this gap requires looking beyond circuit-level faults toward testing semantic preservation across compiler transformations, correctness at representation boundaries, and interactions between software components. Our study provides empirical evidence to guide fault models and benchmarks that capture these mechanisms and preserve the contexts needed to reproduce them.

0.10

A Testing Method for Detector Error Models in Quantum Error Correction Compilers

cs.SE ·2026-11-16 ·Junjie Luo, Yasunari Suzuki
similarity 0.76
Abstract

A quantum error correction (QEC) compiler produces, from a code and a noise model, both the physical circuit to execute and a detector error model (DEM). The DEM lists the probability of each error mechanism and the measurements it flips. Decoders consume the DEM without verification, so a defect that describes the noise incorrectly calibrates the decoder against wrong rates and silently degrades the logical error rate. Existing techniques for testing quantum software judge correctness by crashes or by statistics of sampled outputs. DEM defects that only distort rates lie below what sampling can resolve at the error rates where QEC operates. We present DEMVal, a testing method that validates each model the compiler emits against a reconstructed reference, with rates obtained from outside the compiler under test. It compares the two models exactly, so its sensitivity is independent of the physical error rate. The reference can be built in three ways that jointly cover the pipeline from source program to emitted model. Applied to NVIDIA's CUDA-Q QEC, Riverlane's Deltakit, and the deq component of Microsoft's QDK-EC, DEMVal found six defects, all confirmed by the developers and fixed. Sampling could have exposed only the four defects that drop, merge, or misplace mechanisms, and exposing all four requires millions of samples per experiment. Even analytically optimal moment tests miss the two rate-level defects, while exact model comparison detects all six with no samples. To our knowledge, DEMVal is the first systematic testing method for the error-model semantics of QEC compilers.

0.09

SynDebug: A Framework to Debug Logic Bugs in Fault-Tolerant Quantum Computing Programs

cs.ET quant-ph ·2026-10-15 ·Nicholas S. DiBrita, Jack Lange, Tirthak Patel
published similarity 0.76
Abstract · SynDebug will appear at SIGOPS ATC 2026

Fault-tolerant quantum computing (FTQC) introduces substantial systems-level complexity through quantum error correction (QEC), making debugging FTQC programs challenging. Existing quantum debugging approaches primarily target logical-level circuits and do not naturally support debugging within realistic FTQC execution flows. We present SynDebug, the first systems-level debugging framework for FTQC programs. SynDebug introduces lightweight assertion-based debugging primitives that operate directly within encoded FTQC infrastructures while avoiding additional logical surface area and minimizing temporal overhead. We evaluate SynDebug across multiple QEC code families, code distances, and encoded workloads, including state preparation, entanglement validation, and Shor-style programs. Our results demonstrate that SynDebug enables practical FTQC debugging with an average 1.8% additional circuit depth overhead (0% in most cases) and no measurable increase in the logical error rate, showing that systems-level debugging for large-scale FTQC applications is both feasible and practical.

0.30

Noise-Resilient Testing of Quantum Programs Based on Output Dominance

cs.SE ·2026-10-03 ·Yuechen Li, Yige Yang, Tao Yue
similarity 0.74
Abstract

Quantum software testing (QST) is a central quality-assurance activity for checking whether quantum programs conform to their specifications. In the noisy intermediate-scale quantum (NISQ) era, gate, decoherence, and measurement errors distort observed outputs, making it difficult to distinguish program defects from noise. The existing noise-aware QST literature typically mitigates or models noise before applying a test oracle. However, these strategies can incur substantial cost and depend on calibration data, model training, or backend-specific information, limiting their applicability. We present Qomino, a dominance-guided QST approach for judging tests from noisy samples without a separate noise-estimation or mitigation phase. The approach combines decomposition-aware inverse construction, comparison of the expected outcome with the strongest observed competitor, and bounded retries for inconclusive decisions. We evaluate Qomino on 30 controlled buggy variants from six Qiskit programs and six simulated noisy backends, comparing it with six baselines spanning statistical, quantum-specific, and learning-based methods. Qomino achieves 85.65% accuracy over all six programs and 99.95% in the restricted two-program evaluation, significantly outperforming the corresponding baselines. Across the evaluated programs and backends under the stated settings, Qomino is faster than the compared quantum-specific and learning-based methods. Ablation and retry analyses support the contributions of its main components.

0.09

Testing and Verification of Quantum Compilers through Assurance Contracts and Evidence

cs.SE cs.ET ·2026-09-24 ·Furqan Nasir, Muhammad Arif Shah, Iftikhar Alam
similarity 0.73
Abstract · 38 pages, 3 figures

Quantum compiler assurance requires a semantic relation that matches the intended use and observations that can expose violations at the delivered interface. This critical integrative survey compares verified transformations, equivalence checking, differential and metamorphic testing, property-based testing, and evidence for assurance across revisions. A source catalogue and focused extraction matrix distinguish formal guarantees, reported empirical findings, analytical deductions, and proposed practice. A recorded coverage update and source-level selection decisions make the review auditable within its declared scope. Four documented failure cases connect conditional applicability, parameter association, termination, and phase conventions to method selection. A worked example involving layout metadata, parameter bindings, and ancillary qubits demonstrates why validating a circuit under a reconstructed interpretation can leave the delivered interface unchecked. An illustrative revision scenario then separates fault detection from change attribution. The resulting guidance specifies applicability, complementary observations, and treatment of inconclusive outcomes. Published bug counts, mutation results, and processing benchmarks support different claims and do not establish a common effectiveness ranking. The proposed regression architecture remains unevaluated as a complete system; its practical value requires controlled comparisons on independently adjudicated compiler-change events.

0.19

HyQDB: LLM-Assisted Debugging for Hybrid Quantum Workflows

cs.SE ·2026-09-23 ·Charlie Campbell, Hao Mark Chen, Shuang Liang, Hongxiang Fan
benchmark similarity 0.71
Abstract

Hybrid quantum program failures frequently occur silently, yet existing debugging tools provide limited support for detecting and repairing them. These faults dominate the failures reported by domain experts, yet existing tools evaluate on public data that under-represents this failure mode. Our key insight is that faults divide into two classes that require different strategies: mechanical faults, which allow deterministic analysis, and conceptual faults, which require reconstructing the program's intent. To address this challenge, we present HyQDB, a tiered agent that injects deterministic hardware, physics and optimization evidence into the LLM repair process. When no evidence is detected, the agent treats this silence as a signal to escalate to a second intent-reconstruction tier, that infers the program's behaviour and reconciles it with the implementation. To evaluate HyQDB, we introduce QFaultBench, a benchmark built from an expert-derived fault taxonomy that represents the true failure modes of hybrid programs. On a held-out set of human-authored programs, HyQDB raises repair success over a standard LLM from 45% to 75%. We show that the escalation gate is crucial, giving a 20% improvement in mechanical fault repair accuracy.

0.12

QDiff: Differential Testing of Quantum Software Stacks

cs.SE quant-ph ·2026-11-05 ·Jiyuan Wang, Qian Zhang, Guoqing Harry Xu, Miryung Kim
top venuehighly cited similarity 0.70
Abstract

Over the past few years, several quantum software stacks (QSS) have been developed in response to rapid hardware advances in quantum computing. A QSS includes a quantum programming language, an optimizing compiler that translates a quantum algorithm written in a high-level language into quantum gate instructions, a quantum simulator that emulates these instructions on a classical device, and a software controller that sends analog signals to a very expensive quantum hardware based on quantum circuits. In comparison to traditional compilers and architecture simulators, QSSes are difficult to tests due to the probabilistic nature of results, the lack of clear hardware specifications, and quantum programming complexity. This work devises a novel differential testing approach for QSSes, named QDIFF with three major innovations: (1) We generate input programs to be tested via semantics-preserving, source to source transformation to explore program variants. (2) We speed up differential testing by filtering out quantum circuits that are not worthwhile to execute on quantum hardware by analyzing static characteristics such as a circuit depth, 2 qubit gate operations, gate error rates, and T1 relaxation time. (3) We design an extensible equivalence checking mechanism via distribution comparison functions such as Kolmogorov Smirnov test and cross entropy

0.69