CS Paper Radar

Beyond Best-of-$k$: Prior-Consistent DAPS for Ambiguous Nonlinear Inverse Problems

Merve Kocabas, Benjamin A. Burns, Andreas Geiger, Kent Gauen, Sara Fridovich-Keil

cs.CV cs.LG ·submitted 2026-10-22 17:26 UTC · v1

Abstract

Diffusion models have become strong priors for solving inverse problems. However, nonlinear inverse problems such as phase retrieval remain challenging when multiple measurement-consistent solutions are distinguishable only by the prior; we call such measurements ambiguous. Existing diffusion-based samplers rely on local approximations during reconstruction. For an ambiguous measurement, these approximations can allow measurement guidance to favor a measurement-consistent mode that is close to a prior-supported mode but is itself not supported by the prior. Evaluation often masks this type of failure by reporting the best-of-$k$ runs, where the best is selected by comparison to the ground truth. We introduce Prior-Consistent DAPS (PC-DAPS), a variant of Decoupled Annealing Posterior Sampling (DAPS) designed to address this failure case by maintaining multiple candidate solutions within a single sampling run. As annealing noise decreases, PC-DAPS prunes and replaces weaker candidates according to their prior consistency, without any ground-truth access. PC-DAPS reduces the incidence of prior-inconsistent samples and improves sample quality on nonlinear inverse problems while preserving sample quality and diversity on linear inverse problems.

Closest papers

Nearest neighbours by meaning across the whole index.

Diffusion Models are Provably Efficient Priors for Sparse Recovery

cs.IT stat.MLcs.LGmath.OC ·2026-11-18 ·Ivan Lee, Xingyu Xu, Yuejie Chi
similarity 0.71
Abstract

Diffusion models have transformed generative modeling through their ability to capture and generate samples from complex data distributions. This success has spurred substantial interest in using pretrained diffusion models as expressive priors for highly ill-posed inverse problems in imaging and sensing. Despite strong empirical performance, theoretical understanding of this approach remains limited: existing guarantees are often asymptotic or entail prohibitive computational costs in the worst case. In this paper, we address this gap by studying sparse recovery from a small number of linear measurements, a classical problem in compressed sensing. We show that, given an accurate diffusion model capturing a sparsity-promoting Bernoulli-Gaussian prior, a likelihood-guided annealed Langevin sampler provably recovers the sparse signal in polynomial time with near-optimal sample complexity for a broad family of random and deterministic sensing matrices. When the signal is indeed drawn from the postulated prior, we further establish total variation guarantees for posterior sampling after a final denoising step. These results lay a theoretical foundation for statistically and computationally efficient inverse solvers with diffusion priors.

0.14

Direct Conditional Transition Sampling for Diffusion Inverse Problems

cs.CV stat.ML ·2026-09-13 ·Qi Yu, Hanlin Wu, Xiaohui Sun
similarity 0.69
Abstract

Training-free diffusion inverse solvers typically choose between local measurement guidance and costly clean-space posterior updates. Independent posterior refresh can improve global correction by sampling a clean conditional and re-noising it, but its practical realization requires probability-flow ODE integration and clean-space Markov chain Monte Carlo (MCMC). We propose Direct Conditional Transition Sampling (DCTS), a direct stochastic-flow approximation to the same ideal refresh target. Rather than explicitly drawing a clean sample, DCTS estimates the measurement-conditioned clean mean along a short inner path and transports Gaussian source noise directly to the next noisy state. A denoiser-compatible sufficient statistic and a covariance-scaled operator update enable this conditional-mean estimation. Experiments on four inverse problems demonstrate that DCTS achieves competitive reconstruction quality with up to $16.8\times$ speedups over competing methods.

0.06

FlowSGS: Improving Flow Priors for Inverse Imaging with Stochastic Interpolants

cs.CV ·2026-09-17 ·Tianao Li, Xinhui Qian, Emma Alexander
similarity 0.69
Abstract

Flow matching has emerged as the state-of-the-art generative model and has been used for plug-and-play (PnP) priors to solve inverse problems in computational imaging. However, existing flow-based inverse solvers make simplifying approximations in posterior sampling and/or assume linear forward models. In contrast, principled diffusion-based methods exist but are computationally expensive. To circumvent these problems, we introduce FlowSGS, a flow-based posterior sampling method using Split Gibbs Sampling (SGS) with annealed coupling, and make flow-specific interventions to the prior sampling and annealing steps, theoretically grounded in the Stochastic Interpolants (SI) framework. Using a novel timestep correction and accelerated warm-up with one-step flow models, our method is faster and more accurate than the state of the art across a range of imaging problems. We demonstrate the first use of flow-based samplers for a nonlinear inverse problem (Fourier phase retrieval) and apply one-step flow models to principled Bayesian inverse imaging.

0.29

PosteriorBench: From Point Estimates to Posterior Matching in Evaluating Generative Inverse Solvers

cs.LG cs.CE ·2026-09-17 ·Jiachen Yao, Zi-Siang Hsu, Xi Deng, Aditi Gupta, Xin Ju +3 more
benchmarkcode/data similarity 0.68
Abstract · 32 pages, 10 figures, 21 tables; the code is available at https://github.com/neuraloperator/PosteriorBench

Generative models are increasingly used to solve scientific inverse problems, but existing evaluations still focus primarily on whether a method can produce a single plausible reconstruction. This is insufficient for ill-posed problems, where multiple solutions may be consistent with the same sparse or noisy observations. In these settings, a method can achieve strong pointwise accuracy while still failing to capture the true posterior through mode collapse, overconfident uncertainty, or averaging incompatible solutions. We introduce PosteriorBench, a benchmark for evaluating the distributional accuracy of generative inverse solvers. PosteriorBench evaluates four physics-based inverse problems: Darcy flow inversion, Poisson source recovery, carbon capture and storage, and light transport material inference. For each task, we construct high-fidelity reference posteriors using computationally heavy but established procedures such as rejection sampling and Markov chain Monte Carlo, enabling direct assessment of whether solvers recover the full set of solutions rather than the single best sample. We pair these references with a five-metric posterior evaluation suite: posterior-mean error, posterior-standard-deviation error, maximum mean discrepancy, sliced Wasserstein distance, and radially averaged power-spectrum error. These metrics assess pointwise accuracy, marginal uncertainty, distributional alignment, and global frequency fidelity. The benchmark spans sparse sensing, low-resolution observations, nonlinear forward models, varying noise levels, and multimodal priors, with a unified pipeline for distribution matching and uncertainty quantification. Our experiments reveal substantial distribution-matching gaps across current solvers, while showing that neural operators improve resolution robustness, and guidance weights and generation noise are key to posterior-variance calibration.

0.48

Principled MAP estimation for inverse problems: bridging the gap between convergence and performance

cs.CV cs.LG ·2026-09-29 ·Alexandre Lagier, Valentine Tosel, Anne Gagneux, Mathurin Massias, Ségolène Martin
theory similarity 0.68
Abstract

Pretrained denoisers provide a powerful way to incorporate image priors into restoration algorithms. Plug-and-Play and RED approaches exploit fixed-noise-level denoisers within first-order optimization schemes, with convergence guarantees, but often struggle to achieve high-quality reconstruction on severely ill-posed inverse problems. In contrast, recent state-of-the-art approaches leverage denoisers derived from flow- or diffusion-based generative models and evaluate them along a sequence of decreasing noise levels. While these methods achieve strong empirical performance, their convergence theory remains limited. In this paper, we bridge this gap by specifically designing an algorithm that combines denoisers at decreasing noise levels with a schedule tailored to ensure convergence. From a Bayesian perspective, we prove that our method converges to a $\textit{Maximum a Posteriori}$ (MAP) estimate, under suitable assumptions. Subsequently, we apply our method to various ill-posed inverse problems and show that it surpasses convergent methods while competing with state-of-the-art empirical ones.

0.17

Backward-Consistent Diffusion Sampling for Sparsely Observed PDE Inverse Problems

cs.LG ·2026-10-03 ·Yida Pan, Muhammad H. Ashiq, Chanyong Jung, Yixuan Jia, Jonah M. Miller +2 more
theory similarity 0.67
Abstract

Recovering Partial Differential Equation (PDE) coefficient fields from extremely sparse observations is a severely ill-posed inverse problem for which generative machine learning methods (e.g., diffusion models) have become a leading way to encode the prior. Recent state-of-the-art diffusion solvers lift these priors to function spaces, finding a physics-consistent reconstruction in the output space of the diffusion denoiser. We prove that, in a discontinuous PDE setting, output space methods can result in failure to appropriately minimize the unobserved error with the correct coefficient field. Consequently, we propose Function Space Backward-Consistent Sampling (FunBCS), an input space optimization approach for solving PDE problems which aims to find the best input such that the denoiser reconstruction is physics-consistent. We then prove that FunBCS appropriately minimizes the unobserved error, unlike output space optimization methods. Per our theoretical analysis, we also provide insights on how to dynamically allocate the number of input space optimization steps used throughout the sampling process. Our evaluations, across four PDE inverse problems (including the discontinuous Darcy flow), demonstrate that FunBCS reduces the reconstruction error by $27$-$64\%$ while running $1.4$-$2.1\times$ faster when compared to the current state-of-the-art.

0.14

Consecutive Posterior Fusion for Diffusive Recovery of Unobservable Image Structures

cs.CV cs.AI ·2026-10-02 ·Elena Morotti, Davide Evangelista, Elena Loli Piccolomini
similarity 0.66
Abstract · 21 pages, 7 figures, 2 tables

Solving severely ill-posed imaging inverse problems requires recovering image structures that are unobservable or weakly constrained by the measurements. Diffusion models provide expressive learned priors for inferring such missing information, while posterior sampling incorporates measurement consistency along the reverse process. Standard diffusion posterior samplers, however, rely on instantaneous measurement-aware estimates, without explicitly exploiting information carried by previous posterior corrections. We introduce Consecutive Posterior Fusion Denoising Diffusion Null-Space Models (CPF-DDNM), an inference-time strategy that fuses consecutive measurement-aware estimates to improve the diffusive recovery of unobservable image structures, without requiring retraining or additional denoiser evaluations. We instantiate this principle within DDNM, whose range/null-space decomposition reveals that consecutive fusion preserves the measurement-determined component while acting exclusively on the prior-driven null-space estimate. We thus provide a geometric interpretation of CPF-DDNM and a local error analysis that characterizes the optimal time-dependent fusion coefficient, including the extrapolative regime. Experiments on sparse-view and simulated low-dose computed tomography, as well as medical image super-resolution, show consistent improvements over DDNM and competitive performance against diffusion-based inverse solvers.

0.14

Backward SDEs-based Diffusion for Physics-Constrained Generation

cs.LG ·2026-09-14 ·Zihao Wang
top venue similarity 0.66
Abstract · Accepted as ICML paper

Pretrained score-based diffusion models provide strong unconditional priors, yet enforcing measurement or physics consistency in inverse problems is often handled by heuristic guidance, intermittent projections, or task-specific conditional training, with limited guarantees of feasibility at the end of inference. We propose terminal-conditioned inversion for score-based SDE priors. Given a frozen Score-SDE prior and a task-defined terminal feasibility specification, we construct an associated backward stochastic differential equation whose adapted solution defines a principled inverse map from the terminal requirement to a prior state at a chosen noise level. Under standard regularity conditions, we establish existence and uniqueness of the adapted solution and obtain terminal consistency by construction. We further develop a practical neural BSDE solver that composes arbitrary pretrained diffusion priors with domain constraints without modifying the score-defined coefficients, producing an anchored prior state that enables neighborhood sampling for uncertainty characterization. Experiments on toy datasets validate stable terminal-conditioned inversion and distributionally consistent neighborhood sampling. As a real-world case study, we apply the framework to sparse-view CT reconstruction and achieve improved reconstruction quality over representative training-free baselines while satisfying strict measurement feasibility under the prescribed terminal specification. Project is available in: \href{https://laplacelab.github.io/BSDEDiffusion/}{https://laplace.center/icmlbsdeI/}

0.35