CS Paper Radar

Workload-Aware Monitoring for AI-RAN

Babak Azkaei, Georgios Exarchakos, Kishor Chandra Joshi

cs.NI eess.SY ·submitted 2026-10-22 17:45 UTC · v1
published

Abstract

AI-RAN platforms are expected to share CPU and GPU resources between radio workloads and AI services. Aggregate telemetry reports operating conditions, but timing changes may reflect different workloads, processors, or measurement boundaries. We propose workload-aware monitoring that associates radio-work descriptors with processing paths, timing boundaries, and operating context before comparing like with like. In 16 over-the-air downlink experiments, hybrid dispatch (CPU for transport blocks (TBs) below 4,096 bytes and GPU otherwise) has 29.66% and 22.93% lower mean host-callback durations than direct GPU dispatch, without and with a synthetic GPU co-runner, respectively. Grouping locates the separation in small TBs, while large-TB callback-duration ranges overlap. These observations identify a candidate for complementary CPU/GPU use.

DOI
10.1145/3843179.3858061

Closest papers

Nearest neighbours by meaning across the whole index.

ScaleRAN: A Runtime for Elastic GPU Resource Management in AI-RAN

cs.NI cs.DC ·2026-10-16 ·Arthur Hamard, Jérémie Leguay, Gopalasingham Aravinthan, Alberto Conte, Julien Lallet +1 more
similarity 0.68
Abstract · This work has been submitted to the IEEE for possible publication

AI-RAN is driving the convergence of radio access network (RAN) processing and artificial intelligence (AI) workloads on GPU-enabled computing platforms, ranging from GPU-accelerated base stations to cloud-native infrastructures. While GPU acceleration improves the efficiency of virtualized RAN functions, the computational demand of latency-critical baseband processing varies with traffic load, creating transient spare GPU capacity that can be reclaimed by co-located AI applications. Existing GPU-sharing mechanisms rely on coarse-grained hardware partitioning or static resource allocation, limiting their ability to adapt to slot-level workload fluctuations while preserving strict timing requirements. This paper presents ScaleRAN, a node-local runtime for elastic GPU resource management in AI-RAN. ScaleRAN leverages NVIDIA Green Contexts to dynamically partition Streaming Multiprocessors (SMs) between RAN and AI workloads through a ladder of pre-created GPU partitions, enabling low-overhead resource reallocation at RAN slot granularity. The proposed runtime naturally supports Open-RAN (O-RAN) O-Cloud deployments, one representative AI-RAN deployment scenario. To drive these reallocations, we propose a reactive controller inspired by Kubernetes autoscaling and a proactive controller based on quantile regression and conformal prediction. We also develop LDPCSim, a GPU-accelerated workload generator built on NVIDIA Aerial for reproducible evaluation. Results show that predictive fine-grained GPU partitioning satisfies slot-level RAN deadlines while increasing the GPU resources available to co-located AI workloads, demonstrating the practicality of elastic GPU sharing for future AI-RAN platforms.

0.20

Beaver: Elastic GPU Sharing between ML and Latency-Critical vRAN Workloads

cs.DC cs.NI ·2026-10-01 ·Yuncheng Yao, Zhenzhou Qi, Junyao Zheng, Chung-Hsuan Tung, Danyang Zhuo +1 more
highly cited similarity 0.67
Abstract · 16 pages, 16 figures

Within the shared industry vision of AI-RAN, AI-and-RAN seeks to co-locate virtualized radio access network (vRAN) workloads and AI services on shared GPUs. This sharing is inherently asymmetric: vRAN workload is latency-critical, whereas the machine learning (ML) workload is a throughput-oriented, best-effort co-tenant. We present Beaver, a GPU sharing system that jointly manages compute and memory resources while protecting the vRAN's strict processing deadline. Beaver sizes the vRAN's streaming multiprocessor (SM) allocation from each slot's scheduled workload, repartitions SM allocations at slot granularity, and rewrites compiled ML kernels to yield HBM bandwidth during the vRAN's memory-critical phases. We implement Beaver and evaluate it using NVIDIA Aerial with heterogeneous multi-cell workloads, real-world cellular traces, production inference kernels, and full-stack LLM serving. On an H200 GPU, Beaver keeps the vRAN's p99.9 latency within its 1.5ms uplink deadline while retaining 74% of Llama-3.3-70B serving throughput. It also incurs no observed deadline misses under replayed cellular traces, protects a 375us downlink deadline, and generalizes to other GPUs including A100, GB10 and GH200.

0.44

Eunoia: Toward Application-Transparent, Scalable GPU Sharing in AI-RAN

eess.SP ·2026-10-11 ·Zongshen Wu, Marko Milenković, Jiarong Xing, Rahman Doost-Mohammady
similarity 0.64
Abstract

The AI-RAN paradigm makes the next-generation cellular network more versatile by co-locating AI and RAN workloads on the same commodity hardware. While the GPU is a promising platform for AI-RAN realization, a generic concurrent AI application interferes with the latency-sensitive RAN on GPU compute resources. In this paper, we propose Eunoia, a dynamic real-time AI-RAN GPU scheduler that is transparent to both AI applications and the RAN workload and operates at the granularity level of the RAN slot. We deploy Eunoia onto NVIDIA Aerial AI-RAN and evaluate Eunoia on both an over-the-air 5G private network and an emulated multi-cell network. We demonstrate that in a 27-cell AI-RAN, Eunoia keeps the RAN uplink P99 latency under 3 ms while delivering higher AI performance than other RAN-safe static partitioning methods.

0.38

Workload Identification with Physical Side Channels for AI Governance

cs.CR cs.AIcs.CYcs.LG ·2026-08-31 ·Simone Gargiulo, Gabriel Kulp
hot direction similarity 0.63
Abstract · 10 pages, 2 Figures

AI compute verification is one of the first tangible and tractable points for international policy aimed at AI governance. Determining whether frontier labs, or any operator, comply with agreements requires the regulating authority to discern how their compute is used. The elementary building block of AI compute is the GPU, and any activity it executes leaves a physical trace. Here, we show that an external observer can identify the class of the workload running on an NVIDIA H200 from its power draw. Unlike on-chip NVML telemetry, which can be spoofed or replayed, such a physical channel can in principle be observed independently of operator cooperation. We recorded $930$ five-second traces at $\sim 10$ MHz, covering seventeen open LLM families and twenty-five non-AI workloads. Over this corpus we separate training from inference and from non-AI computation with an accuracy of $97\%$ and a macro-averaged F1 score of $0.955$, evaluated on model families unseen during training. AI workload spectral content predominantly lies below $\sim 20$kHz and training is particularly recognizable through the memory-bound optimizer update. The GPU operator is then treated as adversarial and able to reshape the physical computation itself. Four evasion strategies are tested to disguise training as inference, producing an additional 680 adversarial traces. A detector hardened against evasion strategies, with the tested strategy held out, catches training $\geq 99\%$ of the time for three of the four strategies. The fourth, diluted low-rank adaptation (LoRA), is detected $48$--$88\%$ of the time with a hardened classifier, rising to $\geq 98\%$ with an additional rescue rule. While these attacks are not a comprehensive evaluation against adversarial behaviour, they offer initial insights beyond genuine activities and a dataset for developing and testing stronger evasion mechanisms.

0.60

Where Does the Energy Go? Profiling LLM Agent Inference on Blackwell GPUs

cs.DC ·2026-08-31 ·Qi Luo, Kunlin Li, Ziwen Wang, Yun Chen
similarity 0.63
Abstract · 11 pages, 6 figures

LLM agents that iteratively reason, plan, and invoke tools create workload profiles fundamentally different from single-pass inference, yet how their energy consumption is distributed across hardware components and workload phases remains poorly understood. Characterizing these workloads therefore requires simultaneous visibility into both component-level power and phase-level execution. We conduct a full-stack energy profiling study combining NVML GPU counters, Intel RAPL CPU/DRAM counters, and Intelligent Platform Management Interface (IPMI) system-level sensors on 2x NVIDIA RTX PRO 6000 Blackwell GPUs, and profile three representative workloads with Qwen3.8-27B. For mathematical reasoning, we compare thinking-enabled and thinking-disabled modes. Our measurements reveal that GPU-only telemetry misses 41-45% of system energy across all three workloads, with non-GPU components accounting for the remainder. In our setup, the sequential agent workload consumes 63x more system energy per output token than saturated serving, reflecting the absence of batching, context growth across turns, and tool-induced idle periods. Extended thinking generates 21-75% more tokens per problem, while per-token energy differs by less than 1% between modes within each dataset, indicating that the resulting increase in energy is driven by output volume rather than a change in per-token efficiency. Continuous batching improves system-level energy efficiency by 3.2x from 1 to 16 requests per second, as GPU power plateaus while throughput continues to increase with batching depth. For the memory-bandwidth-bound reasoning workload, throughput remains unchanged under per-GPU power caps of 400-600 W but drops sharply at 300 W. These findings suggest that context-management techniques such as summarization and selective retrieval may help reduce energy consumption in agent deployments.

0.44

GPU-Initiated Communication: Dissecting Down to the Bone

cs.DC cs.NIcs.PF ·2026-10-01 ·Javid Baydamirli, Ismayil Ismayilov, Kaan Oktay, Didem Unat
code/data similarity 0.63
Abstract · 15 pages, 11 figures, 16 tables. Code and data: https://github.com/ParCoreLab/Dissecting-GPU-Communication-Experiments

GPU-initiated communication lets GPU threads post RDMA operations directly to the NIC. It underpins NVSHMEM, NCCL GIN, and DeepEP, which serve the fine-grained, latency-critical communication of Mixture-of-Experts (MoE) models, yet its performance characteristics and optimizations remain scarcely documented beyond source code, and library comparisons fail to separate the costs of the hardware mechanism from those of the library around it. This paper dissects GPU-initiated communication at the GPU-NIC boundary. We first detail the GPU-side network path: queue placement, work-request construction, doorbell ordering, and completion semantics. We then introduce mini-gda and mini-proxy, minimal transports for the GPU and CPU-proxy submission paths, and measure them alongside NVSHMEM IBGDA, NCCL GIN, DeepEP, UCCL-EP, MSCCL++, and fabric-lib on NVIDIA H100, H200, B200, and GB200 platforms. A minimal GPU path issues an operation in 0.7 $μ$s and completes in 4.0 $μ$s; libraries add up to 4.6 $μ$s of issue time through queue management, memory ordering, and completion scope, and issue time scales with the SM clock. A tuned CPU proxy matches or beats the GPU path at idle, at the cost of a dedicated core whose operating state sets its latency and throughput. On either path, sharing a queue with bulk traffic raises latency by one to three orders of magnitude. Reaching the 260 M msg/s ceiling of our InfiniBand platform requires doorbell batching and queue parallelism, and both have resource costs: communication code can reduce GPU block residency even when unused, and all-to-all traffic loses 59% of its NIC message rate at about 3,000 active connections. The submission path alone therefore does not predict communication performance. Our experiment code and results are available at https://github.com/ParCoreLab/Dissecting-GPU-Communication-Experiments.

0.56

GNoF: A Low-SM-Overhead GPU-Native NVMe-over-Fabrics Completion Path for Data-Intensive GPU Workloads

cs.DC cs.AR ·2026-11-16 ·Lei Tian, Wenhao Gu
similarity 0.63
Abstract · 9 pages, 5 figures, 4 tables

GPUs are the main compute engine for data-intensive workloads whose datasets exceed device memory and reside on remote flash. The conventional host CPU orchestrates every NVMe-over-Fabrics (NVMe-oF) transaction and stages data through host memory, costing high CPU usage, repeated CPU-GPU synchronization, and redundant data movement. GPU-initiated storage removes the CPU from the I/O path, but existing designs leave two problems: synchronous lock-step completion pins streaming multiprocessors (SMs) in spin-polling, wasteful over a 10-100 microsecond RDMA round trip, and current GPU-native remote systems focus on target-side firmware while using per-command doorbells and periodic CQ polling. We present GNoF, a GPU-native NVMe-oF/RDMA data path where GPU threads build command capsules, post send work-queue elements, ring doorbells, and reap completions entirely on the device; the CPU only handles one-time connection setup, the admin queue, and a keep-alive thread. Three mechanisms target long fabric round trips: a doorbell mover that coalesces a burst's doorbells into one MMIO ring; a batched CQ poller with a lock-free fast peek and monotonic completion counters that cannot lose a wakeup; and a set-associative, reference-pinned GPU page cache with split fetch/wait pipelining and orphan-fill takeover. GNoF needs no target or firmware change and runs against an unmodified SPDK target. On a 200 Gb/s InfiniBand fabric, GNoF reaches 1.77 million 4 KB IOPS per client at 0.37% host CPU and about 1% SM occupancy, versus 40% CPU for kernel nvme-rdma and about 100% SM occupancy for lock-step polling. Against three existing baselines (kernel nvme-rdma, BaM over a BlueField-3 DPU, and BaM on a local SSD) under identical workloads, we show 10-22x gains on selective column I/O, CPU-burn immunity, and the regime where bulk staging is faster.

0.18

Plenty of Room in the Middle: Revealing Opportunities on a GPU Cluster via Fine-Grained Monitoring

cs.AI cs.DC ·2026-10-26 ·Andrew Sheinberg, Samyak Gupta, Kai Li
code/data similarity 0.63
Abstract · 19 pages, 12 figures, 4 tables. Originally written in fall 2024

GPU clusters have become essential computing resources for AI and scientific research in academia and industry. However, their high cost and growing demand often result in long queueing delays. While previous monitoring efforts have operated at second- or minute-level frequencies, they primarily informed job-level scheduling for clusters and lacked the detail needed to optimize GPU-level utilization. This paper presents an in-depth study of a university research GPU cluster, analyzing resource usage at 100 ms intervals. We have developed a lightweight monitoring tool that leverages Nvidia's DCGM library to capture fine-grained "compute utilization" metrics within GPUs. Deployed on a cluster with 89 nodes and 319 GPUs, our tool collected data over several months. This paper focuses on a 10-day period with 7,399 jobs submitted by 150 users from 12 departments. Our study reveals three key findings: (1) the GPU cluster exhibits significant underutilization, with over 70% of jobs using less than 20% of GPU memory and 50% averaging below 5% Streaming Multiprocessor (SM) utilization; (2) 80% of jobs have a drastic mismatch between their requested and actual durations, significantly limiting the scheduler's effectiveness; and (3) the multi-GPU jobs we examined show highly periodic communication patterns. These findings suggest there is plenty of room in the middle: substantial utilization gains are available through better job scheduling and GPU multitasking, independent of hardware or application improvements. Our monitoring solution is available as open-source software at https://github.com/als244/gpu_server_monitoring.

0.34