CS Paper Radar

HiP3R: Hierarchical Pose Graphs for Long-Horizon 3D Reconstruction

Zunnan Xu, Shangchen Zhou, Yihang Luo, Chen Change Loy

cs.CV ·submitted 2026-10-22 17:51 UTC · v1
community pick

Abstract

Feed-forward models accurately estimate camera motion and 3D geometry from short video windows. However, computational and memory costs prevent direct inference on sequences containing thousands of frames. Long videos must therefore be processed as overlapping chunks. This division produces independent local reconstructions with inconsistent coordinate frames and duplicate estimates of shared cameras. Achieving global consistency requires propagating constraints from adjacent overlaps and distant revisits across the sequence. This requirement naturally motivates pose graph optimization. However, the choice of graph level creates a trade-off. Chunk-level graphs efficiently resolve scale drift and close large loops. Yet, their rigid transformations cannot correct internal errors or conflicting frame predictions. Conversely, frame-level optimization offers local flexibility, but scaling it globally is computationally expensive and can break metric scale. HiP3R resolves this trade-off using a hierarchical pose graph. HiP3R first optimizes a robust chunk-level $\mathrm{Sim}(3)$ graph to establish the global layout and scale. It then holds this layout fixed and estimates one shared $\mathrm{SE}(3)$ camera per frame, turning overlapping window predictions into a single trajectory. Experiments across multiple benchmarks demonstrate the effectiveness of HiP3R in improving camera trajectories and 3D reconstruction. Our method applies to both chunk-based and streaming backends without additional training or fine-tuning. The codes are available at https://kkakkkka.github.io/HiP3R.

Comment
Technical Report

Closest papers

Nearest neighbours by meaning across the whole index.

VGGT-Bridge: Beyond Sequential Pose Graphs via Coarse-Stride Skip Edges

cs.CV ·2026-10-05 ·Sungjae Choi, Hanna Bae, Sunghyun Baek, Junmo Kim
publishedcode/data similarity 0.74
Abstract · Accepted to ACCV 2026

Feed-forward visual geometry transformers such as VGGT reconstruct dense 3D structure from images in a single forward pass, simplifying multi-view 3D reconstruction. However, their quadratic attention complexity makes them difficult to scale to long sequences with thousands of frames. Chunk-and-align frameworks address this by splitting a long sequence into overlapping chunks and stitching their local reconstructions into a pose graph. Yet existing methods connect only sequentially adjacent chunks, so small per-frame errors accumulate along the chain into large-scale drift. To move beyond sequential edges, we propose VGGT-Bridge, which adds long-range skip edges that directly constrain non-adjacent chunks without retraining. By running VGGT on sparsely sampled coarse chunks, each coarse chunk bridges distant fine chunks into a single direct constraint. We further turn VGGT's first-frame scale bias into a drift correction by feeding selected coarse chunks in reverse, and a loop-aware policy keeps this reversal compatible with existing loop closures. VGGT-Bridge reduces ATE by 28.3% on KITTI Odometry, 18.8% on Virtual KITTI, and 10.0% on Waymo Open over the SwiftVGGT baseline, achieving the best performance among all chunk-and-align methods. Our code is available at https://github.com/BeCow5X5/VGGT-Bridge.

0.40

When pose graphs are not enough: a failure analysis of pose-graph-based camera estimation for Gaussian splatting

cs.RO eess.IV ·2026-10-08 ·Senthil Palanisamy, Azwad Sabik, Alan Dolhasz, Mira Slavcheva
similarity 0.72
Abstract

Exterior Gaussian-splat twins for real-estate listings are captured to a fixed recipe: a consumer drone orbits a single property in several overlapping passes at stepped altitudes, with occasional vertical ascents, so the imagery is dense, sequential, GPS- and time-tagged, and revisits each facade from many angles. This structure is tantalizing: it suggests camera poses could be recovered by a dense pose-graph optimization (PGO) whose only unknowns are the poses, far fewer than the joint pose-and-point problem bundle adjustment (BA) solves. PGO is mature in robotics, but almost always as post-processing: it redistributes the drift of an already-decent trajectory once loop closures tie it together. Splatting captures push that regime to its limit, every frame closing loops with dozens of others, raising a clean question: does pose-only optimization reach BA accuracy? We built a system specialized to this capture structure, not a general-purpose SfM tool, to test it. It beat COLMAP on speed but never on quality; this paper is the candid post-mortem. The shortfall arises from several interacting causes, hand-set weights, greedy merging and a noisy GPS ruler, together with two limits inherent to the formulation: SE(3) edges carry no scale degree of freedom, so independently scaled sub-maps drift when merged, and a two-view edge stops short of the coupling one 3D point imposes on every frame that sees it. A viable design must add back Sim(3) constraints, absolute GPS priors, retained structure, and uncertainty-aware weighting

0.21

Think Locally, Refine Globally for Memory-Efficient 3D Reconstruction

cs.CV cs.AI ·2026-09-18 ·Jingke Zhou, Chenhang Ma, Zhizhou Zhong, Mingkai Liu, Zhuang Zhou +4 more
similarity 0.71
Abstract · 9 pages,4 figures

We propose LoG-VGGT, a memory-efficient framework for long-sequence 3D reconstruction that balances local temporal modeling with global camera consistency. Instead of relying on full global attention, our method introduces cross-window attention at a small subset of transformer blocks, enabling effective information propagation across adjacent temporal windows while keeping memory usage bounded. To mitigate long-term pose drift, we further design a global camera consistency refinement module, where camera tokens interact with compact register tokens via cross-attention to enforce scene-level constraints across the entire sequence. This design enables joint optimization of camera representations and significantly improves long-horizon pose stability without incurring the high cost of sequence-wide attention. Extensive experiments demonstrate that LoG-VGGT achieves improved depth accuracy and robust camera pose estimation across multiple long-sequence benchmarks, while delivering competitive streaming reconstruction performance.

0.42

Scal3R: Learning Efficient Multi-Relative Pose Query for Scalable Online 3D Reconstruction

cs.CV ·2026-09-03 ·Chin-Yang Lin, Yang-Che Sun, Cheng Sun, Fu-En Yang, Min-Hung Chen +3 more
publishedcode/data similarity 0.71
Abstract · ECCV 2026. Project page: https://linjohnss.github.io/scal3r/

Online 3D reconstruction models perform poorly on long videos. This happens because regressing poses relative to a fixed first-frame anchor forces extrapolation far beyond the training distribution. Small drifts accumulate and amplify into significant geometric collapse. However, we observe that per-frame depth remains stable throughout this failure. The backbone's local geometry remains intact; only the global pose head breaks down. Motivated by this decoupling, we introduce Scal3R. This approach reformulates online reconstruction as multi-reference relative pose querying. We use lightweight learnable tokens, which make up about ~1% of the parameters, and inject them into a completely frozen backbone via asymmetric attention. This setup queries poses relative to multiple past keyframes. An online pose-graph optimization system with loop closure suppresses long-range drift. Scal3R reaches convergence in 8 hours on a single GPU. It reduces the average ATE by over 60% on KITTI compared to the online baseline. It also achieves state-of-the-art performance across Virtual KITTI, Sintel, TUM-Dynamic, ScanNet, and 7-Scenes. Project page: https://linjohnss.github.io/scal3r/

0.63

Graph3R: Unifying View Graph Initialization with Feed-Forward Reconstruction

cs.CV cs.RO ·2026-10-12 ·Jingwen Yu, Hengli Wang, Jianhao Jiao, Zhonghang Liu, Ping Tan +1 more
similarity 0.70
Abstract

Feed-forward reconstruction recovers camera poses and dense geometry from image sets whose views are assumed to come from a single scene. In practice, uncurated image collections often contain views from disjoint scenes, and reconstructing these views jointly can corrupt camera poses and geometry. Existing pipelines typically resolve view associations in separate stages before final reconstruction, leaving view graph initialization and reconstruction inference only loosely coupled. We introduce Graph3R, which unifies view graph initialization with feed-forward reconstruction through a shared geometric representation. A lightweight verification head predicts pairwise covisibility from the multi-view features of $π^3$ to construct a view graph. This graph classifies the input views into scene groups. For each group, we mask the shared features before decoding camera poses and dense geometry. Reusing the multi-view features allows Graph3R to reconstruct disjoint scenes separately with a single backbone pass. Across three benchmarks, Graph3R improves average maximum recall at 100% precision by upto 8.99 percentage points over the baseline, while improving reconstruction quality on mixed-scene inputs. Regarding the multi-session mapping task, Graph3R improves cross-session localization and achieves competitive pose estimation accuracy, while delivering a runtime speedup of approximately $35.9\times$ over the baseline when reconstructing the query group. By integrating learned view association with geometric inference, our approach takes a step toward end-to-end reconstruction from uncurated image collections.

0.15

RIGOR: Rig-Informed Geometry for Omnidirectional Reconstruction

cs.CV ·2026-09-11 ·Tingjun Huang, Dmitry Rudshin, Mathieu Meyer, Pietro Bonazzi, Marc Pollefeys +1 more
code/data similarity 0.69
Abstract

Recent developments in feed-forward 3D reconstruction resulted in models which can recover dense scene representations and camera motion solely from an image stream. However, such predictions are prone to becoming inconsistent over long trajectories, specifically in demanding environments with repetitive structures, weak textures and dynamic objects or people. One way to mitigate those challenges is to use an omnidirectional camera, which provides wide spatial coverage and captures richer visual information. Yet, the majority of models do not offer support for 360-degree imagery or require additional fine-tuning. To bridge these two aspects, we present RIGOR: a large-scale reconstruction pipeline for gravity-aligned omnidirectional videos that retains a frozen feed-forward perspective backbone and exploits each panorama as a four-view virtual rig. The rig structure is used to detect and repair locally inconsistent predictions, to retrieve loop closures through cyclic four-view consensus, and to geometrically verify candidate revisits before global optimization. Verified constraints drive a Sim(3) pose graph that corrects accumulated rotation, translation, and scale drift along the sequence. We demonstrate that the proposed consistency mechanisms improve both trajectory accuracy and reconstructed geometry over a feed-forward baseline on challenging construction-site sequences. The code is made available under this link: https://github.com/TangentH/RIGOR.

0.48

Robust Global Structure-from-Motion via View Graph Pruning

cs.CV ·2026-08-22 ·Jiamin Xu, Lixing Yao, Weichen Dai, Renshu Gu, Zunjie Zhu +2 more
similarity 0.69
Abstract

Structure-from-Motion (SfM) aims to estimate camera poses and reconstruct 3D structures from a collection of unordered images. Compared with incremental SfM, global SfM achieves better scalability by jointly estimating camera poses based on a view graph constructed from pairwise correspondences. However, its performance is highly sensitive to erroneous edges caused by visually ambiguous matches, which may lead to incorrect camera registration and reconstruction artifacts. In this work, we propose a subgraph-guided view graph pruning framework for robust global SfM. Our key idea is to exploit the internal consistency of reliable subgraphs to identify and remove unreliable connections. Specifically, we first partition the view graph into locally consistent subgraphs and perform global SfM within each subgraph to obtain reliable camera poses. We then apply RANSAC-based edge pruning across subgraphs to remove inconsistent edges, and finally perform global SfM on the refined view graph. Extensive experiments on ambiguous, sequential, and unordered image datasets demonstrate that our method improves the robustness of global SfM under challenging conditions. Further evaluation with neural rendering shows that the improved camera estimation leads to higher-quality novel view synthesis results.

0.25

GeoFF3D: Coordinate-Anchored Feed-Forward Reconstruction for Large-Scale UAV Mapping

cs.CV ·2026-08-28 ·Xiang Yang, Yongli Wang, Yunsheng Zhang, Jun Li, Hao Chen +1 more
code/data similarity 0.68
Abstract

Existing feed-forward 3D reconstruction methods typically process a bounded number of images and recover cameras and geometry in local or internally normalized frames. Extending them to large-scale UAV mapping requires scalable multi-chunk processing and reliable aggregation, while full Sim(3) alignment can become unstable for near collinear trajectories. We present GeoFF3D, which combines a coordinate-anchored model with a spatial large-scale reconstruction framework (SLRF). The model uses georeferenced camera translations and optional geometric priors to predict camera poses and dense point maps directly in a gravity-aligned Z-up metric frame. SLRF partitions images into spatially overlapping chunks, propagates shared-view priors, and aggregates local reconstructions hierarchically, while remaining applicable to different bounded-view models. Across nine aerial mapping blocks, GeoFF3D achieves the best average reconstruction quality, improving F@5 from 0.829 for Pi3X + SLRF to 0.877. On long UAVScenes sequences, it reaches 0.848, compared with 0.687 for Pi3X + SLRF and 0.451 for the strongest evaluated SLAM/streaming baseline. GeoFF3D reconstructs 2,000 images in approximately five minutes, demonstrating scalable and robust large-scale UAV reconstruction.The code is available at https://github.com/yanxian-ll/GeoFF3D.

0.40