CS Paper Radar

Does LeWorldModel Preserve Local Action Geometry?

Vasil Vasilev, Siddharth Nayak

cs.LG cs.RO ·submitted 2026-10-22 07:13 UTC · v1
publishedcommunity pick

Abstract

We examine how closely pretrained LeWorldModel (LeWM) reproduces the effects of small action changes. Using matched simulator and model responses, we measure action sensitivity with Gram matrices at three perturbation scales. Across nearly a thousand states from Reacher and OGBench Cube, the most sensitive action directions differ by median angles of about $36^\circ$ and $42^\circ$, respectively, at the smallest scale. Increasing the perturbation tenfold reduces median normalized Gram discrepancy by roughly 70\% on Reacher and 47\% on Cube. Geometry measured in pixels and embeddings varies more across scales than the chosen physical-state geometry. On held-out directions, environment Grams achieve median embedding response errors of 17\% and 28\%, compared with 26\% and 38\% for an isotropic reference with the same trace. LeWM's errors are higher at this scale. These findings support scale-specific evaluation of action sensitivity; its effect on control remains an open question.

Comment
13 pages, 3 figures. Accepted as a poster at the NeurIPS 2026 Workshop on Symmetry and Geometry in Neural Representations (NeurReps), Extended Abstract Track

Closest papers

Nearest neighbours by meaning across the whole index.

Geometry Conditioning in an Embodied SLM: Training Controls and Robustness Diagnostics in a 0.8B Hybrid Model

cs.RO cs.AI ·2026-09-06 ·Hao Li, Haofei Sun, Lin He
similarity 0.59
Abstract · 7 pages, 3 figures. Includes ancillary data and analysis code

We study how physical-state inputs affect a 0.8B hybrid language model adapted for manipulation with 6.2M trainable parameters. Six conditions are trained on three LIBERO-Spatial tasks and evaluated over three seeds and 540 held-out rollouts. Conditioning recurrent decay gates on geometric increments yields 28.9% success, compared with 36.7% when those increments are shuffled during training and 24.4% without explicit object/goal geometry. Both geometry policies receive correct inputs at evaluation. A token adapter using the same increments scores 27.8%; differences vary across seeds and remain inconclusive. Token-clock conditioning scores 11.1%, including one seed that fails to converge. In separate robustness tests, a state-only relative-coordinate policy retains 7/10 success under frame relabeling, whereas all four tested visual policies fall to at most 3/20 after a 5 cm object displacement. These results show no reliable advantage from training-time geometric alignment under this recipe and illustrate the gap between coordinate invariance and physical-layout generalization. Episode records, seed-level analyses, and figure-generation code accompany the paper.

0.31

A Phenomenology of Neural Geometry in Vision-Language-Action Models

cs.RO cs.LG ·2026-10-14 ·Mozes Jacobs, Aiden Swann, Mathilde Papillon, Siddharth Boppana, Fenil R. Doshi +14 more
similarity 0.58
Abstract · 41 pages, 10 pages of main text, 8 main text figures

Robotic manipulation is inherently geometric, but what shape does the world take inside the policy that performs it? Prior work on vision-language-action (VLA) policies establishes that task-relevant variables are linearly readable from activations, yet readability certifies only that a variable is present and says nothing about the shape its values trace, which may be curved and multi-dimensional. Using controlled sweeps, natural rollouts, linear probes, and activation interventions, we build a taxonomy of seven task-relevant concepts in VLA models. We find that realized geometry is predominantly multi-dimensional and is shaped by the constraints under which the policy acts. Physical joint limits, for example, leave wrist orientation an open arc rather than a circle, and distance to the target, a single scalar, is realized in two orthogonal subspaces, a coarse ruler for the approach and a fine ruler for the grasp. The same geometries reappear in two further VLA models on real-world robot data, indicating that they are neither model-specific nor artifacts of simulation. We demonstrate how the findings are actionable by steering along the geometry a concept realizes. Overall, this work lays out an initial phenomenology of realized geometry in VLA policies and demonstrates that a concept's shape carries as much importance as its readability.

0.26

Atomic Motion Coordinate for Language-Steerable and Force-Responsive Manipulation

cs.RO ·2026-09-14 ·Jiaqi Zhai, Jingkai Zhao, Chen Yang, Siyuan Ma, Yutian Zhang +8 more
similarity 0.57
Abstract · 8 pages, 4 figures

Can changing only the language instruction redirect a VLA policy's end effector, or does the visually driven motion prior dominate? We present Atomic Motion Coordinate, a geometry-grounded coordinate for steerable and force-responsive manipulation. Each arm owns thirteen signed translation, rotation, and hold atoms grounded from text and forward kinematics with vision withheld, and the coordinate is injected into every action-expert block via weighted codebook alignment. Contact history modulates the same coordinate through a bounded spherical residual that is recomputed from a fixed nominal latent to regenerate only the unexecuted horizon suffix. Across 7,520 offline horizon interventions, opposite-atom separation reaches 92.5/83.1% (single/dual) versus 39.1/24.0% for LA4VLA-style. Across 50 real-robot trials per task, AMC raises OOD fruit progress from 60.5% to 87.8%; force adaptation raises Plug/Vase from 59.0/71.5% to 78.5/75.2%.

0.33

Modeling What Changes: Sparse, Residual World Models for Object-Centric Manipulation

cs.RO cs.AI ·2026-09-02 ·Param Thakkar, Parsika Paresh Shah, Manisha Sushant Gote
benchmark similarity 0.56
Abstract

Monolithic world models predict the entire next state at every step, spending capacity re-predicting the static majority of a scene and injecting error into it. We ask whether explicitly modeling change (a per-object change gate plus a residual delta head that perturbs only the objects the gate flags) is a more effective and interpretable bias for physical prediction and control. On a MuJoCo tabletop pushing benchmark scaling from 3 to 8 objects, the sparse/residual model predicts next-state poses 2.5 to 4.6 times more accurately than a dense multilayer perceptron at 8.6 to 11.1 times fewer parameters, sustains change-detection F1 of 0.80 to 0.87 where the dense baseline is degenerate, transfers across object counts with zero retraining (99.4 percent F1 retention), and reaches about 90 percent of its full-data accuracy with a quarter of the data. In autoregressive rollout it compounds far less error, hugging the no-motion floor while the dense model drifts. Finally, inside a sampling-based planner, prediction-only models fail (though a true-simulator oracle solves the task with the identical planner, confirming the planner is sound), but once featurized and trained for the states a planner visits, the sparse model begins to plan (0.23 plus or minus 0.06 success over three seeds) while the dense monolith stays at zero at every seed. Modeling what changes, rather than re-predicting the whole world, is a simple, effective bias for object-centric physical AI; code, data generators, and all checkpoints will be released upon publication.

0.37

Counterfactual Action Evaluation, Observation Bottlenecks, and Representation Geometry in Joint-Embedding Predictive World Models

cs.LG ·2026-10-02 ·Arjun Subramanian
publishedcode/data similarity 0.56
Abstract · 15 pages, 7 figures. Published in the 40th Conference on Neural Information Processing Systems (NeurIPS 2026), Workshop on Physical World AI…

Low latent prediction error does not establish that a world model distinguishes the consequences of its actions. We introduce an evaluation protocol that traces the same intervention through simulator state, raster observations, target embeddings, and predictor outputs. Exact simulator-state forks in a controlled deformable-physics testbed reveal distinct bottlenecks. Changed commands alter particle motion, yet 41.5% of one-step raster pairs are identical. Observation loss is not the whole explanation: among 579 high-visibility counterfactuals, median predictor-to-target response is 0.0051 and 0.0217 across two seeds, falling to 0.0027 and 0.0116 after variance normalization. An isotropic state perturbation matched to the target counterfactual embedding shift produces 190x and 53x larger predictor changes on the same visible pairs, isolating action-path under-use rather than a dead or globally shrunk predictor. MSE-only training gives 8.36x lower 10-step latent error in matched seeds, but in spectrally concentrated spaces; one VICReg target encoder is also strongly concentrated, so neither error nor rank alone certifies physical state. Finally, stiffness remains near chance even from full-resolution rasters and mechanical state while privileged material parameters decode perfectly, indicating weak identifiability under this excitation rather than encoder discard. These results motivate auditing physical effect, observation visibility, representation geometry, and action dependence separately.

0.49

Beyond Geometric Closure: Measuring and Diagnosing Mechanical Consistency in Visual Dynamics

cs.CV eess.IV ·2026-10-17 ·Qibin Gu, Yunfeng Yan
code/data similarity 0.56
Abstract · 34 pages, including supplementary material; 16 figures and 38 tables. Code: https://github.com/BIGPAO123321/mechanical-consistency-visual-dy…

Visual accuracy, geometric validity, and agreement with applied forces are distinct requirements for visual dynamics. We introduce a diagnostic framework that connects reaction-free SI measurements to controlled interventions on coordinate readout, training integration, and actuator response. Reference replay calibrates the measurement path, while continuous scoring exposes progress against fixed engineering targets. With three seeds per setting, we evaluate KeyCLD and CON across 343 planar assemblies at 64/256 pixels and V-JEPA + AC and LingBot-VA on 100 shared spatial test assemblies. CON reduces image MSE by 37.6%/37.2% relative to persistence, yet neither planar model attains valid native geometry. At 256 pixels, calibrated RGB replay places forecast errors far above the reference measurement floor. Exact-state KeyCLD has identical geometric pass rates under Euler and RK4 training, yet its score rises from 52.65 to 64.30 as force and energy errors decrease. In both spatial pathways, CAD/IK reconstruction restores geometry while mean actuator residuals exceed five times the engineering targets. These diagnoses distinguish coordinate correction, numerical improvement, and persistent force-response errors, guiding targeted improvements to visual dynamics.

0.30

WorldOracle: Benchmarking Action-Conditioned World Models against Real-World Executions

cs.RO cs.CV ·2026-10-13 ·Haoyi Duan, Liliang Chen, Nan Wang, Yang Zhang, Yuhang Lu +11 more
benchmark similarity 0.56
Abstract

We introduce WorldOracle, a benchmark specifically designed to evaluate action-conditioned world models (ACWMs) against paired real-world executions. Given the same initial observation and low-level action sequence, WorldOracle asks whether a predicted rollout reproduces what happens in the real world, including physical consequences and task-state transitions. We evaluate models along four complementary dimensions: physical state correctness, interaction spatial alignment, key interaction area fidelity, and multi-view action coherence. To support this evaluation, we curate real-world training and evaluation suites that cover different interaction dynamics and embodiments. The evaluation suite contains long, multi-segment episodes with both successful and failed executions, enabling evaluation across varied action outcomes and behavior distributions. Experiments on seven representative ACWMs reveal distinct model strengths and failure modes. WorldOracle provides a systematic foundation for measuring and advancing action-conditioned world modeling for manipulation. We release the datasets, evaluation code, and leaderboard: https://worldoracle-benchmark.github.io/.

0.25

Outcome-Conditioned End-Effector Geometry Across Vision-Language-Action Policies

cs.RO cs.AI ·2026-09-18 ·Xingyu Lin, Zhuang Li, Zhongrun Wu, Shouquan Zhou, Dehui Du
similarity 0.55
Abstract · 8 pages, 3 figures, 7 tables, 23 references. Submitted to ICRA 2027

Vision-language-action (VLA) policies solve the same manipulation task through different action interfaces, but task success alone does not establish whether their physical executions agree. We study cross-policy end-effector geometry in 15,000 closed-loop LIBERO rollouts from four policies. The primary clean-condition analysis forms 3,600 configuration-matched, and therefore dependent, policy pairs. Both-success pairs have a median normalized dynamic time warping distance of 0.0120 m versus 0.0380 m when exactly one policy succeeds. This ordering holds in every task, every policy pair, and nine sampling and band-limited representations; however, the ratio varies severalfold across representations, so we report the direction rather than a fixed multiple. Both-failure pairs are more separated again but rest on thin, uneven support, so we report them as exploratory. Within successful executions, partner replacements separate more across tasks than across initial states. A matched baseline still reveals measurable, heterogeneous residual policy differences, so a low cross-policy distance does not imply interchangeability. Successful executions sit about as far from same-task demonstrations as those demonstrations sit from each other, compatible with task-associated geometry without separating training-data overlap from task constraints. A common 72-action window preserves the ordering but reduces its magnitude; endpoint and duration adjustment likewise leaves a positive mixed-outcome coefficient relative to both-success pairs, though its magnitude is specification-dependent. Under composite visual stress, policy rankings and pair composition change together.

0.21