CS Paper Radar

On Exact Critical-Region Boundaries in Continuous-Time Multiparametric Optimal Control Problems

Lida Lamakani, Efstratios N. Pistikopoulos

eess.SY math.OC ·submitted 2026-10-23 01:31 UTC · v1

Abstract

Continuous-time multiparametric model predictive control solves the optimal control problem once, offline, for every initial state, and divides the initial-state space into critical regions, each with its own control law and sequence of active constraints. A boundary between two regions is either a hyperplane, given by one linear equation, or curved. The curved boundaries have not been computed to date; a classifier has been trained instead to distinguish the regions, so the partition has been known only approximately. In this paper we show that a curved boundary can be computed exactly, without solving any optimal control problem. The method rests on one property. Once the sequence of active constraints is fixed, together with the instants inside it at which a constraint becomes active or inactive (the switching times) and the instant at which the change of the neighboring region first appears (the event time), every condition on a boundary is a linear equation in the initial state, so the computation of a boundary, curved or not, is exact. We fix one of these instants, a switching time or the event time, and solve the linear equations that correspond to it for the corresponding initial state on the boundary; stepping the fixed instant along the horizon yields the whole boundary. A hyperplane is the case in which no instant is left to fix. We illustrate the method on the Newell-Lee evaporator, which has seven critical regions and eight boundaries, four hyperplanes and four curved, computing one boundary of each type in full with the adjacent regions at its ends.

Closest papers

Nearest neighbours by meaning across the whole index.

Advances in Continuous-Time Multiparametric Optimal Control: The Role of Time-Varying Active Constraints

eess.SY math.OC ·2026-10-02 ·Lida Lamakani, Efstratios N. Pistikopoulos
similarity 0.85
Abstract

Multiparametric optimal control in continuous time partitions the space of initial states into critical regions, each with its own control law involving a set of time-varying active constraints. The boundaries between two neighbouring regions are either hyperplanes, which are given in closed form by one linear equation, or curved boundaries, which must be computed. The sequence of time-varying active constraints plays a key role in defining the linear or nonlinear shape of a critical-region boundary. In this paper we show how to determine that shape prior to any computation. In particular, we show that the boundary is a hyperplane under two conditions. First, the new constraint becomes active at the same instant at every point of the boundary. Second, the durations for which the other constraints stay active are the same at every point of the boundary. Otherwise, the boundary is curved. Both conditions can be read from the sequences of active constraints of the two neighbouring regions, which gives five rules, each yielding a hyperplane or a curved boundary. We illustrate the rules on the Newell-Lee evaporator, where they classify the eight boundaries of a seven-region partition into four hyperplanes, given in closed form, and four curved boundaries, computed exactly.

0.46

Joint-Feasibility Margin Feedback for Bounded-Input Second-Order Control Barrier Functions

cs.RO ·2026-10-12 ·Siyuan Yang, Shaoming He
code/data similarity 0.60
Abstract · 6 pages, 3 figures

Multiple second-order control barrier function constraints can exhaust their common control authority under bounded acceleration, even when the current state remains feasible. We define a signed local joint-feasibility margin whose sign exactly identifies whether the current barrier half-spaces intersect the admissible input set. For unit-scaled distance constraints, it has acceleration units and a support-function dual that identifies weighted constraint conflicts. We predict the margin one sample ahead for nine task-directed candidates, selecting either the least-deviating candidate that attains a desired margin or the candidate with the largest predicted margin before solving the same hard HOCBF quadratic program. A controlled one-step case shows that, at the state predicted under the hard-QP command, two constraints remain individually feasible but become jointly infeasible, whereas the margin-feedback controller retains a positive next margin. Separately, across 20 paired initial conditions, the margin-feedback controller retains the hard-QP command in a low-pressure task and acts at positive margin in a critical task before the hard-QP problem becomes infeasible; its trajectories remain feasible at that time and complete the task. Source code is publicly available. https://github.com/xirhxq/cbf/tree/robio2026-preventive-regulation

0.26

Conditions for Normality of Pontryagin's Maximum Principle in the Absence of State Constraints

eess.SY math.OC ·2026-11-03 ·André Tits, Pierre-Antoine Absil, Noé Tits
similarity 0.58
Abstract

Pontryagin's Maximum Principle is said to be "normal" for the problem at hand when it has a solution (maximizer u*) that explicitly involves the problem's cost function, making the maximum principle helpful (while in the opposite situation it is of no help). The aim of the present paper is, for Lagrange optimal control problems without state constraints, to identify classes of problems for which the Principle is normal. General conditions are introduced that guarantee normality, and classes of problems that satisfy these conditions are identified. Such classes include problems for which the constrained (by bounds on the control values) "augmented" reachable set, with cost along an upward vertical axis, has a convex lower-boundary function and the optimal terminal state lies in the relative interior of the reachable state set, with the terminal constraint within the affine hull of that set. Such classes include problems for which the constrained (by bounds on the values of the control signal) "augmented" (with the cost value along an upward "vertical axis") reachable set has a "convex" lower boundary for which the optimal terminal state lies in the relative interior of the set of reachable states. Special attention is given to Lagrange steering problems: sufficient conditions are obtained on a nested sequence of sub-classes of such problems, culminating with the class of steering problems with scalar control signal and linear time-invariant (LTI) state dynamics and objective integrand, for which normality is guaranteed whenever all eigenvalues of the state dynamics matrix A are real (e.g., if A is symmetric or triangular or the system is overdamped) or have small enough imaginary parts; simple 2 x 2 examples show that, in contrast with the situation in the finite-dimensional case, this property does not extend to arbitrary A matrices.

0.31

First-Order Optimization as Minimum-Time Control

eess.SY math.OC ·2026-08-14 ·Liraz Mudrik, Isaac Kaminer, Pramod P. Khargonekar
benchmark similarity 0.57
Abstract · 13 pages, 4 figures

We formulate first-order optimization as a minimum-time control problem. The iterate is the state, the update, a combination of the gradients observed so far, is the control, and the points with gradient norm at most a prescribed tolerance form the target set. For a fixed objective and start, the minimum number of oracle queries needed to reach the target is a value function: it measures the complexity of the instance, not the worst case over a class. On a strongly convex quadratic, the conjugate gradient iterates emerge from the discrete Pontryagin conditions, and the value is a controllability index. Beyond the quadratic, a Hessian-generated reachable span replaces the controllability matrix, and feasibility becomes a reachability question: whether a critical point can be reached at all, and in how many steps, is read from the span. Curvature is a resource: a checkable condition certifies that an instance needs fewer steps than the controllability index of its quadratic model at the minimizer, and the gap can grow without bound with the dimension. The value is thus a benchmark for the intrinsic difficulty of each instance, against which any first-order method can be measured.

0.10

BarrierFormer: Transformer-Guided Predictive Barrier Enforcement for Safe Robot Control

cs.RO eess.SY ·2026-09-20 ·Anandsingh Chauhan, Kunal Garg
published similarity 0.57
Abstract · 23 pages, 2 figures, Accepted at 10th Conference on Robot Learning (CoRL 2026), Austin TX, USA

Control barrier functions (CBFs) have become one of the most popular tools for encoding and enforcing state constraints in safety-critical robotics. Standard CBF approaches are inherently myopic in nature as they enforce safety only at the current time step. Consequently, the system can be driven toward the boundary of the safe set where no feasible safe control exists at a future timestep. Model predictive control (MPC) based approaches address this by enforcing state constraints over a receding horizon. However, such approaches generally require the model to be known for solving a constrained optimization problem at every step, which is computationally expensive for real-time deployment. We propose BarrierFormer, a barrier-supervised transformer framework that addresses these limitations by encoding rollout-level CBF constraints in learning a model-free safe policy. A causal transformer encodes observation-action history, autoregressively generates a predictive rollout through the dynamics head to replace the model, and provides a residual correction to a nominal controller through the action head to replace the online computation. A barrier critic operating on local observations evaluates CBF constraint violations along this rollout, and a safety teacher computes barrier-consistent actions satisfying these constraints as direct supervision targets for the learned control policy. During inference, the policy maps observation-action history to control actions without any online optimization or model knowledge, enabling real-time model-free predictive safety enforcement. Evaluations across linear and nonlinear, 2D and 3D dynamical systems for safe goal-directed navigation demonstrate that BarrierFormer outperforms existing reinforcement learning (RL)-based, diffusion-based, MPC-based, and transformer-based approaches in safety rate and inference latency.

0.34

Belief-Informed Hybrid Control with Almost-Sure Target-Set Convergence

eess.SY cs.ROmath.OC ·2026-10-06 ·Clinton Enwerem, Saleh Kemal, John S. Baras, Calin Belta
theorycode/data similarity 0.57
Abstract · 8 pages, 5 figures, 6 tables. Project page: https://clintonenwerem.com/belief-hybrid-control/

Controlling a hybrid system to a target set under parameter uncertainty can require informative actions that temporarily drive the system state away from the specified set. We propose a belief-informed dual-control algorithm that combines belief-space receding-horizon selection with an expected-decrease constraint on a nonnegative target-set progress function. To accommodate exploratory deviations, a scalar controller state bounds the constraint's cumulative slack. Our algorithm's two-step lookahead selection uses predicted observations to update the parameter belief before evaluating the subsequent action's admissibility. Under distance-comparison bounds, correct conditional prediction, and recursive feasibility, we prove almost-sure target-set convergence at decision times and bound both the sum of expected progress-function values and the expected neighborhood-entry time. Upper confidence bounds extend these convergence guarantees to bounded model samples with summable error probabilities. In planar regulation with an unknown control direction, we verify recursive feasibility: the proposed two-step selection reduces the Euclidean state norm below 0.01 within 11 decisions for either sign, whereas a myopic one-step selection loses admissibility immediately after zero input. In a simulated bimanual assembly task, our algorithm's one-step implementation uses clearance feedback to complete the assembly under nominal friction, yielding a 96.4% lower infinity-norm relative-position error than the reference-tracking baseline at the method's completion time. At lower friction, its posterior conditioning successfully detects an empty admissible set, whereas a fixed-prior alternative admits an action that violates the conditional decrease constraint. Project page: https://clintonenwerem.com/belief-hybrid-control/.

0.37

COAST: Safe Flight Corridor Planner for Fast and Robust Snap Minimized Trajectories

cs.RO eess.SY ·2026-11-17 ·Alejandro Pelaez, Randal W. Beard
code/data similarity 0.56
Abstract · 14 pages, 4 figures, 2 tables. Submitted to the 2027 American Control Conference (ACC 2027)

Current B-Spline trajectory planners face a critical trade-off: they either sacrifice computational speed to maintain strict Safe Flight Corridor (SFC) guarantees, or they abandon hard safety bounds in favor of soft-constraint penalties to achieve real-time performance. We present COAST (Corridor-Optimized Aerially-Safe Trajectories), a B-Spline based, online trajectory planner capable of formulating snap minimized trajectories with SFC guarantees. COAST divides the problem into two stages: an A* based front-end that generates geometrically simple SFCs (represented as a chain of rectangular prisms), and a quadratic programming back-end for control point optimization. To handle the non-convexity of SFC intersections, we leverage the finite support property of B-Splines, to ensure the spline never exits SFC boundaries. The control point optimization incorporates MINVO transforms for kinodynamic bounding, allowing COAST to design non-conservative, dynamically feasible trajectories, while a snap minimization matrix calculation provides flight smoothness. This formulation provides a formal geometric containment guarantee, while ensuring mean trajectory computation times under 5 ms for real-time deployment. We validate our results through high-fidelity simulation experiments. The source code can be found at: https://github.com/byu-magicc/Minimum-Snap-Trajectories

0.48

Predicted-Flow Control Barrier Functions for Non-Control-Affine Systems

eess.SY ·2026-09-11 ·Amirsaeid Safari, Jesse B. Hoagg
similarity 0.56
Abstract

Control barrier functions (CBFs) enforce safety through conditions imposed pointwise in time without consideration of state evolution over a future horizon. Thus, CBF-based controls are typically myopic. Predicted-flow CBFs (P-CBFs) generalize CBFs from a function of the current state to a functional of the predicted flow under a parametrized control. P-CBFs can certify safety over the entire prediction horizon while simultaneously allowing for performance optimization over the horizon. However, prior work with P-CBFs only applies to control-affine systems, and suffers from a limitation where the prediction horizon can shrink or even vanish. This article addresses both of these shortcomings by introducing a planning control that smoothly transitions from a parametric plan to a backup control (if needed) and a time-shift parameter that determines if transition is needed. The evolution of the control-plan and time-shift parameters is determined from a single guaranteed-feasible convex optimization, which reduces to a quadratic program (QP) if the control limits are a convex polyhedron. The real-time executed control is determined from the instantaneous planning control and time shift. This method simultaneously addresses safety certification and performance optimization over the fixed prediction horizon. The approach is compared to nonlinear model predictive control in simulation of an autonomous car navigating a dense obstacle environment.

0.49