CS Paper Radar

Foundation Models Meet Power Grid Topology for Cascade Prediction

Soumav Biswas, Mia Naeini

eess.SY ·submitted 2026-10-23 14:21 UTC · v1

Abstract

Accurate early-stage prediction of cascading failure severity is essential for assessing the vulnerability of power transmission networks. However, existing data-driven approaches often rely on network-specific representations, limiting their generalizability across power system topologies. This work investigates the complementary capabilities of Large Language Models (LLMs) and Graph Neural Networks (GNNs) for cascading failure severity prediction. First, standalone LLM predictors are developed using a LoRA-fine-tuned LLaMA-3-8B-Instruct model with varying degrees of topological information. A hybrid Graph-LLM fusion framework is then proposed, integrating a Topology-Aware Graph Attention Transformer (TAGAT) with the LLM through confidence-gated fusion. TAGAT captures structural dependencies among transmission lines, while the LLM extracts representations from early-stage power-flow observations and aggregated cascade descriptors. The frameworks are evaluated on 30,000 simulated cascading failure scenarios for each of the IEEE 118-bus and IEEE 300-bus systems. Using only the first four cascade steps, the hybrid framework achieves weighted F1 scores of 0.94 and 0.92, respectively. In cross-system transfer from IEEE 118-bus to IEEE 300-bus, it achieves 0.72 zero-shot accuracy, improving to 0.83 with limited target-system calibration, outperforming standalone models and conventional baselines. These results show the potential of combining graph-based structural learning with foundation models to improve cascading failure severity prediction and cross-system transferability.

Comment
10 pages

Closest papers

Nearest neighbours by meaning across the whole index.

Reachability-Based Formal Verification of Graph Neural Networks with Node and Edge Features

cs.LG cs.AI ·2026-09-24 ·Anne M. Tumlin, Ben Wooding, Zhenxuan Shao, Diego Manzanas Lopez, Tyler Derr +1 more
published similarity 0.66
Abstract

Graph neural networks (GNNs) have become a prominent approach for developing fast, topology-aware surrogates in electric power systems, supporting tasks such as power flow (PF) analysis, optimal power flow (OPF) estimation, and cascading failure analysis (CFA). Despite this growing use, formally verifying GNN-based models remains challenging, with existing methods limited in scope. We extend the neural network verification (NNV) framework to graph-structured inputs through GraphStar sets, a generalization of Star sets that captures uncertainty over both node and edge features. This extension enables the propagation of linear message-passing operations and the sound approximation of ReLU nonlinearities for GNN architectures, including graph convolutional network (GCN) and graph isomorphism network with edge features (GINE) layers. We evaluate GNNV across three power system tasks, PF, OPF, and CFA, on the IEEE-24, IEEE-39, and IEEE-118 test cases, as well as two standard graph classification benchmarks, ENZYMES and PROTEINS. Our results show that GNNV provides tighter robustness guarantees than CORA on graph classification models with ReLU-based activations and, for the first time, delivers edge-aware robustness guarantees for GINE-based PF and OPF models under joint node and edge perturbations.

0.59

Graph-Based Dynamic Activity Prediction for Real-Time Power System Applications

eess.SY ·2026-11-03 ·Stefanos Eleftheriadis, Mohammad Hashemnezhad, Savvas Panagi, Thibaut Vermeulen, Petros Aristidou
similarity 0.63
Abstract

Online dynamic security assessment and day-ahead planning require rapid identification of where disturbances will produce significant dynamic activity. Full time-domain simulations are computationally demanding, while existing machine-learning approaches predict system-level outcomes or require post-disturbance trajectories. This paper proposes a pair-aware Graph Isomorphism Network with Edge features (GINE) framework comprising two task-specific models for predicting bus-voltage and generator apparent-power activity from the operating point and contingency description. Physically aware KPI cuts convert simulated responses into ordinal activity targets for model training. Evaluations on Nordic 32 and the French transmission system with more than 6 000 buses show that pair-aware fusion and graph embeddings improve on a local baseline on Nordic 32, with GINE the lower-cost graph encoder, and that the framework remains effective at large scale. As a downstream application, the predicted activity maps guide Adaptive Model Simplification, reducing continuous and discrete model variables by 72% and 66%, achieving speedups of up to 3.16x, and preserving voltage trajectories when critical substations are retained. These results demonstrate scalable, pre-disturbance prediction of component-level dynamic activity.

0.29

Unified Heterogeneous Graph Neural Network solver for Power Flow, Optimal Power Flow and State Estimation

eess.SY cs.LG ·2026-09-15 ·Ferran Bohigas-Daranas, Hamid Latif-Martínez, Eduardo Prieto-Araujo, Oriol Gomis-Bellmunt, Pere Barlet-Ros
similarity 0.63
Abstract

Power Flow (PF), Optimal Power Flow (OPF), and State Estimation (SE) are fundamental problems in power system analysis, but solving them is computationally expensive. Graph Neural Networks (GNNs) have been proposed as fast surrogates, yet existing solvers are trained for a single problem at a time, producing narrow models that must be rebuilt for each new task. We propose a more general approach: a single Heterogeneous Residual Gated Graph Convolutional Network that solves all three problems with one shared backbone. Rather than learning one mapping, the model learns a reusable representation of how the network behaves, from which PF, OPF, and SE can each be estimated. Trained jointly on the three problems across diverse topologies and loading conditions, and evaluated on the IEEE 14-bus and 118-bus systems, the shared model matches the accuracy of task-specific GNN solvers and stays robust on unseen loading levels and topologies. These results show that a single model can capture the basic operation of a power network and serve several analysis tasks at once, a first step toward a foundation model for power systems.

0.11

PhyPro-FM: A Physics and Prompt-Guided Graph Foundation Model for Contingency Analysis

eess.SY cs.AIcs.LG ·2026-10-19 ·Xu Yang, Zhanyuan Sheng, Chenhui Lin, Haotian Liu, Qi Wang +2 more
similarity 0.63
Abstract

The continuous evolution of next-generation power systems, characterized by the high penetration of renewable energy resources and dynamic topology variations, poses formidable challenges to traditional N-1/N-2 contingency analysis in terms of computational efficiency and scalability. While deep learning-based methods offer accelerated inference, existing studies predominantly treat contingency analysis as a pure regression problem, often overlooking the physical essence of grid operation and engineering requirements of real-world scenarios. To bridge this gap, this paper proposes a physics and prompt-guided graph foundation model (PhyPro-FM) for generalizable and engineering-viable contingency analysis. The proposed architecture integrates graph neural networks with a learnable global query mechanism and, notably, introduces a prompt-guided learning paradigm. By leveraging historical snapshots as few-shot prompts, the model dynamically captures correlations between target and historical operating conditions, significantly enhancing generalization capabilities under unseen topologies. Furthermore, we design a physics-informed training mechanism that prioritizes branch power flow errors over nodal voltage errors, aligning the optimization objective with critical grid security constraints. To ensure engineering applicability, a physics-informed inference mechanism is also developed, incorporating a residual-based correction module and a specialized post-processing strategy for singular branches to circumvent numerical instability. Comprehensive experiments demonstrate that PhyPro-FM outperforms state-of-the-art methods in accuracy and generalization, validating its superior physical consistency and robustness for practical engineering applications.

0.18

Graph Machine Learning: An Opportunity for Power Systems

cs.LG cs.AIcs.CEeess.SY ·2026-08-17 ·Martin Sadric, Sebastian Pütz, Christian Nauck, Veit Hagenmeyer, Frank Hellmann +2 more
surveybenchmark similarity 0.62
Abstract

Modern power systems face growing operational complexity driven by the integration of renewable energy sources, decentralization, and the need for real-time decision-making across a wide range of timescales. Addressing these challenges traditionally relies on model-based methods that, while accurate, can be too slow for operational demands. Machine learning (ML) has therefore emerged as a faster, data-driven alternative. As grid topology plays a central role in power system operation, graph machine learning (GML) methods offer a natural framework for incorporating topological dependencies as an inductive bias. We survey nearly 800 papers at the intersection of GML and power systems, covering forecasting, state estimation, optimization, control, fault diagnosis, and cybersecurity. Power systems constitute an unusually rich benchmark setting for GML, as they combine hard physical constraints, multi-scale dynamics, safety-critical requirements, and scarce labeled data within a single, well-defined domain. Conversely, power systems can benefit from utilizing GML to complement classical solvers, as GML provide scalable, topology-aware approximations with promising generalization and computational efficiency. We identify open challenges, including limited real-world deployment and the need for interpretable models in safety-critical settings. Despite the rapidly growing number of publications, standardized benchmarks and open datasets remain scarce, leaving many results difficult to reproduce and undermining the long-term scientific credibility of the field. We further derive a structured requirements catalog for ML-ready power grid benchmarks, intended to guide future dataset development and improve reproducibility across studies. We call on the community to prioritize dedicated benchmark studies and the release of open datasets and models.

0.23

Physics-Aware Random Walk Fingerprints for Scalable Power Grid Graph Classification

cs.LG eess.SY ·2026-09-04 ·Adnan Anwar
benchmark similarity 0.61
Abstract · power system, power system security, cascading failures, graph classification, random walk fingerprints, physics-aware features

Recent benchmarks such as PowerGraph provide large collections of power-grid graphs for cascading-failure classification. Graph neural networks (GNNs) achieve strong predictive performance on this task, but typically require end-to-end training and model-specific tuning, while their latent representations can be difficult to relate to physically meaningful propagation patterns. Random Walk Fingerprints (RWF) offer a scalable and interpretable alternative, but existing variants primarily emphasise topology and node-level information, leaving grid-relevant operational edge states in the walk dynamics. We propose Multi-Channel Physics-Aware Random Walk Fingerprints (MC-PA-RWF) for power systems, a lightweight graph-level representation framework that introduces physical edge states into random-walk propagation. The method constructs multiple edge-weighted channels from domain-relevant attributes, extracts a channel-specific fingerprint from each weighted graph, and concatenates the resulting vectors into a compact representation. Experiments on three \textit{PowerGraph} benchmark systems show substantial improvements over topology-only RWF and competitive balanced accuracy against strong GNN baselines, including Graph Convolutional Networks (GCN), Graph Attention Networks (GAT), Graph Isomorphism Networks with edge features (GINE), and Transformer-based Graph Convolutional Networks (TransformerConv). At the largest evaluated settings, the node-edge extension MC-PA-RWF+ achieves around 98.04% - 99.32% balanced accuracy and improves failure-class F1 over the strongest GNN baseline by 1.60 -- 5.84 percentage points, with statistically significant gains across all three systems.

0.25

Benchmarking Graph Neural Networks for AC Power Flow: The Role of Inductive Biases and Physical Constraints

cs.LG cs.AI ·2026-10-28 ·Federico Clerici, Ferran Bohigas-Daranas, Hamid Latif-Martínez, Eduardo Prieto-Araujo, Oriol Gomis-Bellmunt +1 more
benchmark similarity 0.61
Abstract

Fast and accurate models for AC power flow (ACPF) are increasingly important as modern electrical grids require more frequent system analyses. Graph neural networks (GNNs) naturally exploit electrical grid topology, yet the effects of architectural design choices on predictive performance remain poorly understood given differences in graph representations and evaluation settings across studies. We present a unified benchmark of representative GNN architectures for ACPF prediction under a common experimental framework. All models use identical preprocessing and training procedures and comparable parameter budgets, isolating the impact of message-passing mechanisms and inductive biases. We also analyze errors by distance from the slack bus and systematically ablate key design components. We evaluate predictive accuracy and physical consistency on the IEEE 14-bus and IEEE 118-bus systems. Results indicate that anisotropic message-passing architectures offer the most favorable trade-off between predictive accuracy and physical consistency under the studied parameter and topology constraints. Explicit edge features encoding line impedances and global context aggregation are particularly important for representing electrical interactions and system-wide dependencies, especially for voltage-angle predictions on the topologically bottlenecked IEEE-118 grid. Under a budget with approximately fixed parameters, two or three message-passing layers generally provide the best balance between depth and representation width, while additional depth offers no consistent improvement. Ablations also show that standard residual and root connections are not necessarily beneficial in shallow models, and that aggregation operators involve trade-offs between statistical accuracy and physical consistency. These results provide practical guidelines for designing graph-based power system models.

0.17

Droop-Aware Foundation Model Power Flow

cs.ET ·2026-09-20 ·Khezr Sanjani, Peng Zhang
similarity 0.59
Abstract

This paper develops a droop-aware extension of the GridFM power systems foundation model, embedding droop gains and frequency/voltage deadband parameters as per-bus node features to enable control-aware AC power-flow analysis. Existing power-flow datasets encode only static electrical features, conflating operating points from qualitatively different control regimes; this work resolves that gap by exposing droop and deadband parameters as structured node features, with deadband discontinuities handled through a smooth tanh approximation that preserves solver differentiability. A transformer-based graph neural network is pre-trained on masked reconstruction and fine-tuned on the resulting control-aware datasets. The framework is validated against PSCAD electromagnetic-transient simulations on a two-bus system (0.11% maximum steady-state error) and cross-validated against an independent PyPower droop solver on the IEEE 24-bus RTS. On the 24-bus system the surrogate attains R2 = 0.9996 for active generation and 0.0015 p.u. voltage-magnitude RMSE; scalability is confirmed on the IEEE 300-bus system (0.0036 p.u. RMSE, R2 = 0.9841 for voltage magnitude across 299,700 predictions). A three-mode control study further shows that the deadband widens the control-error distribution while leaving total droop compensation unchanged, establishing deadband width as an actionable node-level design feature.

0.29