CS Paper Radar

SEMAC: Spherical Energy Matching Ambisonics Codec for Efficient Higher-Order Ambisonics Compression

Christoph Hold, Jan Buethe, Jean-Marc Valin, Jan Skoglund, Toni Hirvonen, Nils Peters

eess.AS eess.SP ·submitted 2026-10-23 17:59 UTC · v1

Abstract

Higher-order Ambisonics (HOA) is an attractive format for immersive spatial audio, but its high channel count and directional properties present significant audio coding challenges. The widely deployed Opus audio codec supports HOA through Channel Mapping Families 2 and 3 (RFC 8486), which code and transmit every Ambisonics channel, so the bitrate grows quadratically with the spherical harmonic order. We introduce SEMAC, which instead represents an Ambisonics signal by a quantized full-order directional energy envelope together with fewer CELT-coded transport channels. CELT separates a per-band energy envelope from the signal shape and restores it after quantization, and SEMAC generalizes this principle to directional signals. Since the reduced transport spans only a lower-dimensional subspace, the decoder re-imposes the envelope observed at the encoder input, restoring the directional energy distribution at full order. A MUSHRA test on fifth-order material compares SEMAC against Opus CMF~3 in matched configurations at 512 and 768 kbit/s. SEMAC with 16 of 36 transport channels is rated above full-order CMF~3 at both rates, and at equal transport channel count above order truncation. The proposed SEMAC strategy of coding fewer transport channels with the directional envelope is found perceptually preferable to coding all HOA channels at low precision.

Comment
Submitted to IEEE ICASSP 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Spatial Audio Coding Through Relative Room Impulse Response Estimation

eess.AS ·2026-09-08 ·Nour Bouayed, Adrien Llave, Jérôme Daniel, Pascal Scalart
similarity 0.67
Abstract · Submitted to International Networked Immersive Audio 2026 (satellite Event of IEEE IS2 2026)

Immersive virtual listening relies on spatial audio technologies such as Higher-Order Ambisonics (HOA), which represent sound scenes as multichannel signals. As the desired spatial resolution increases, so does the number of channels, making efficient compression essential for transmission over bandwidth-limited networks. Moreover, to facilitate deployment by network operators, the target bitrate for immersive audio coding should ideally remain close to the 25 kbps currently allocated to VoLTE audio services. State-of-the-art parametric codecs, such as the recently standardized Immersive Voice and Audio Services (IVAS) codec, achieve compression by transmitting spatial metadata together with a reduced number of transport channels. However, recent studies have shown that IVAS performance degrades on reverberant content, particularly at low bitrates, a limitation that suggests its inability to accurately model room acoustics. In this paper, we propose a novel HOA coding scheme based on the explicit and blind estimation of the Relative Spatial Room Impulse Response (ReSRIR), using a beamformed version of the HOA signal as a reference signal. By exploiting the structure and sparsity of the estimated ReSRIR, we derive an efficient parametric representation for immersive audio coding. Experimental evaluations show that the proposed method achieves higher compression than IVAS in the single-transport-channel regime, while maintaining comparable to slightly better quality.

0.22

An Efficient Parametric Codec for Low-Bitrate First-Order Ambisonics

eess.AS cs.SD ·2026-09-27 ·Wei-Ting Lai, Amy Bastine, Lachlan Birnie, Thushara D. Abhayapala, Prasanga N. Samarasinghe
similarity 0.65
Abstract

Driven by the rapid growth of immersive teleconferencing and generative spatial audio, efficient low-bitrate coding of first-order Ambisonics (FOA) has become increasingly important. In this work, we develop a lightweight parametric FOA codec that retains the standard Directional Audio Coding analysis and synthesis while redesigning the spatial metadata quantization scheme. Rather than quantizing direction-of-arrival (DOA) and diffuseness independently, we combine them into a 3-D directivity vector and jointly quantize these vectors across frequency bands via residual vector quantization (RVQ). The RVQ codebooks are optimized within minutes via stage-wise k-means without backpropagation, yielding a constant-bitrate (CBR) representation that decouples metadata rate from the number of frequency bands. Evaluations show that our approach outperforms low-bitrate perceptual codecs in FOA reconstruction, remains competitive with neural codecs on the downstream Sound Event Localization and Detection task, and maintains robust performance when paired with different external monaural codecs. Given its lightweight training, strong performance, and CBR design, we consider the proposed method to be a favorable and reproducible baseline for future FOA codec research.

0.23

AudioTQ: A Data-Oblivious 6-Bit CPU Audio Codec via Randomized Hadamard Rotation and Lloyd-Max Quantization

cs.SD cs.AIcs.CR ·2026-08-15 ·Sahil Gangurde
code/data similarity 0.57
Abstract · 8 pages, 1 figure, 1 table. Code is available at https://github.com/lostmartian/audioTQ

Lossy audio compression algorithms traditionally rely on psychoacoustic modeling and frequency-domain representations (e.g., MP3, AAC, and Opus) to discard information that is imperceptible to the human auditory system. While highly effective, these approaches are computationally complex and domain-specific. In this paper, we present the design and mathematical formulation of AudioTQ, a data-oblivious lossy audio codec that operates directly in the time domain. Inspired by Large Language Model (LLM) weight quantization techniques (specifically the TurboQuant framework), AudioTQ uniformizes volatile time-domain amplitudes into a predictable standard normal distribution using an orthonormal, randomized Fast Walsh-Hadamard Transform (FWHT) rotation. This enables coordinate-wise scalar quantization using an offline-trained, MSE-optimal 6-bit Lloyd-Max quantizer, augmented by a 1-bit Quantized Joint Least-Squares (QJL) residual correction layer. The resulting 7-bit virtual indices are packed into native 8-bit containers, aligning with standard CPU register boundaries to ensure real-time single-threaded execution without hardware parallel accelerators. We detail the bitwise reconstruction of 24-bit studio stems, analyze the butterfly network of the FWHT, derive the mathematical failure modes under sparse inputs, and present benchmarks showing up to 74.4% physical size reduction alongside a Signal-to-Quantization-Noise Ratio (SQNR) of ~30 dB.

0.30

Geometry-adaptive Ambisonic encoding for sparse microphone arrays of variable topology using physics-informed diffusion

eess.AS cs.SD ·2026-08-17 ·Xiang Zhou, Zhengqiao Zhao, Zhengding Luo, Wen Zhang
similarity 0.57
Abstract

Ambisonics delivers compact scene based spatial audio representation, yet higher order Ambisonic encoding poses difficulties for wearables and embedded hardware. Their microphone arrays are often sparse, irregular, and constrained by device specific boundary conditions. These factors make the spherical-harmonic (SH) domain encoding ill conditioned: inverse filtering amplifies noise, while deterministic neural encoders may overfit to array-specific responses or smooth ambiguous higher-order components. This paper presents DiffM2A, a geometry-adaptive conditional diffusion framework for robust Ambisonic encoding from sparse MAs with variable topologies. Its Geometry-Adaptive Spherical Harmonic Projection (GASHP) front-end constructs boundary-aware SH steering functions and applies an energy-normalized modal projection, mapping array-dependent observations to a common modal representation without explicit pseudo-inverse computation. A dual-branch Elucidated Diffusion Model then estimates complex Ambisonic coefficients, conditioned on both the raw microphone spectra and GASHP features. Sound intensity and rotational equivariance losses further enhance inter-channel phase consistency and structured behavior across SH subspaces. Evaluations on both first- and second-order Ambisonic encoding tasks, using simulated room-acoustics and real-world LOCATA recordings, demonstrate that DiffM2A outperforms conventional and neural baseline methods on signal fidelity, spectral accuracy, spatial coherence, and binaural cue preservation. Additional experiments show that these gains are largely retained across unseen five-microphone layouts and under mismatched open-array and rigid-sphere boundary models.

0.33

ZipCodec: Ultra-Low-Frame-Rate Streaming Speech Coding

cs.SD cs.AIcs.LG ·2026-09-10 ·Luca Della Libera, Cem Subakan, Mirco Ravanelli
code/data similarity 0.56
Abstract · 5 pages, 1 figure

Neural audio codecs are a fundamental component of modern speech generation systems. While recent codecs achieve increasingly low bitrates, reducing frame rate remains challenging, as each token must preserve more information while maintaining reconstruction quality. We present ZipCodec, a streaming neural speech codec operating at 6.25 Hz and 0.80 kbps with a theoretical latency of 160 ms. Our approach combines large-scale WavLM distillation with a redesigned transformer-based architecture, a scalar spherical quantizer, and a latency-aware streaming decoder. Experiments show that ZipCodec substantially outperforms existing streaming codecs at comparable bitrates in both reconstruction and downstream tasks, while operating at a significantly lower frame rate. Despite its 842M parameters, ZipCodec achieves real-time single-stream inference on a consumer-grade CPU. Demo samples, code and checkpoints are available at https://lucadellalib.github.io/zipcodec-web/.

0.36

OLAC: An Overlapped Lossless Audio Codec in the Time-Domain with MDCT Compatibility

eess.AS ·2026-09-14 ·Jean-Marc Valin
similarity 0.55
Abstract · 5 pages

Lossless audio coding is a highly mature field of research, with limited potential for significant improvements in pure compression performance. However, emerging real-time wireless applications increasingly require dynamic transitions between lossy and lossless coding to adapt to fluctuating network capacities. Existing standalone lossless codecs cannot achieve this seamless switching without discontinuity. In this paper, we propose a lossless codec based on time-domain aliasing cancellation (TDAC) that can match the overlap in the CELT mode of the Opus codec. This allows the transition between lossy and lossless coding to be achieved without discontinuity or the transmission of redundant information. We show that the proposed codec still achieves state-of-the-art lossless compression without being penalized by its use of TDAC.

0.38

FOAdapter: A Plug-and-Play Spatial Tokenizer for Low-Bitrate FOA Speech Coding

eess.AS cs.SD ·2026-10-12 ·Kirak Kim, Yoonjeong Park, Juhan Nam, Sungyoung Kim, Minje Kim
code/data similarity 0.54
Abstract · Submitted to ICASSP 2027

Spatially encoded speech conveys not only linguistic information but also spatial cues. This enables listeners to distinguish and localize speakers, contributing to more natural and realistic auditory experiences in applications such as remote conferencing and immersive media. Neural speech codecs (NSCs) enable high-quality reconstruction of monaural speech at increasingly low bitrates while preserving linguistic information, but their ability to effectively preserve spatial cues remains limited. We propose FOAdapter, a plug-and-play spatial tokenizer that leverages a pretrained monaural speech codec to efficiently represent both linguistic and spatial information in first-order ambisonic (FOA) speech at low bitrates. Comprehensive evaluation demonstrates that FOAdapter consistently preserves spatial information across all evaluated codecs. Source code and audio examples are available on our demo website.

0.20

BiMTokenizer: Preserving Semantic-Acoustic Balance in Low-Bitrate Speech Tokenization via Bidirectional State-Space Modeling

cs.SD ·2026-09-01 ·Xin Zhang, Lin Li, Chuanbo Liu, Jianquan Liu, Kong Aik Lee
top venuecode/data similarity 0.54
Abstract · Accepted to EMNLP 2026 Main Conference; 19 pages, 5 figures

Speech codecs serve as bridges between continuous speech signals and large language models, yet face an inherent conflict between acoustic fidelity and semantic preservation. To mitigate this conflict, recent works increasingly adopt dual-tower architectures to decouple semantic and acoustic modeling with separate encoders. However, these dual-tower designs incur substantial architectural overhead. To avoid such complexity, we revisit the single-tower paradigm and propose BiMTokenizer, a low-bitrate speech codec (around 1.1 kbps) combining a bidirectional state-space backbone with Residual Spherical Leech Quantization (RSLQ). The bidirectional backbone strengthens temporal modeling, while RSLQ offers a fixed, well-separated lattice bottleneck for robust semantic and acoustic tokenization without learned-codebook collapse. Experiments show that BiMTokenizer achieves superior acoustic reconstruction and the lowest WER among low-bitrate codec baselines across both clean and noisy environments, while using less than half the parameters of recent dual-tower baselines. Furthermore, its robust semantic representations yield strong performance on downstream speech understanding tasks, confirming that a well-designed single-tower codec can preserve the semantic-acoustic balance at low bitrates. The code and model weights are available at https://github.com/ZhangXinWhut/BiMTokenizer.

0.68