CS Paper Radar

Satellite-derived bathymetry of Arabian Gulf ports under leakage-free validation: a multi-site benchmark of empirical, machine-learning and deep-learning models against 285,000 multibeam soundings, with an outlook for UAE waters

Muhammad Saeed, Mohamed H. Alhosani, Dmitry Mikhaylov, Yasser F. Al Wahedi

cs.LG cs.CVphysics.ao-phphysics.geo-ph ·submitted 2026-10-24 11:21 UTC · v2
benchmark

Abstract

Satellite-derived bathymetry (SDB) is often proposed as a low-cost complement to multibeam surveys of ports, but its accuracy is seldom measured on an area the model has never seen. We test SDB in the turbid, shallow and tidal waters of the Abu Dhabi coast against 285,619 multibeam soundings from twelve surveys at six port areas, reduced to Lowest Astronomical Tide. The Stumpf ratio, the Lyzenga transform, a monotonic gradient-boosted tree model (LightGBM) and a U-Net ensemble were trained on 72 Sentinel-2 images and tested in transfer to an unseen site and with local control (about 20% of a site's soundings, spatial blocks beyond a 225 m buffer). The validation design changed the result more than the model: the same LightGBM model gave 0.57 m RMSE under a random pixel split, 1.30 m under spatial blocks and 1.66 m at an unseen site. In transfer the Stumpf ratio (1.45 m) was not beaten by LightGBM, the U-Net or Lyzenga. With local control a hybrid of the tree output and the band ratio reached 1.11 m over 0-11 m, 67% of pixels within the IHO S-44 Order 2 tolerance and a conformal 95% interval with 95% observed coverage; in clear water it reached 0.29-0.53 m. The seabed could not be read beyond 11 m, and summer images were five to six times more turbid than winter ones. ICESat-2 ATL24 agreed with the surveys to 0.25 m after a depth-dependent offset was removed. A 60 m reconnaissance mosaic of 17,200 km2 of the UAE coast, calibrated cell by cell on ICESat-2 without any vessel survey, reached 1.42 m RMSE on held-out blocks over half of the product. Sentinel-2 SDB with about a hundred control depths per image is a usable reconnaissance and change-monitoring tool in these waters to about 10 m; it does not meet S-44 Order 1 without local control, and accuracies from random splits should not be taken as operational accuracy.

Comment
54 pages, 28 figures, 25 tables. v2: author list revised; no change to the scientific content

Closest papers

Nearest neighbours by meaning across the whole index.

AquaCubeAI-Powered Monitoring Turbidity on-board Φsat-2

cs.CV ·2026-09-11 ·Pietro Di Stasio, Francesca Razzano, Elisa Liparulo, Gabriele Meoni, Nicolas Longépé +4 more
similarity 0.62
Abstract · 16 pages, the paper is under review on IEEE JSTARS

Timely monitoring of coastal water quality is critical for environmental protection, yet conventional satellite workflows rely on downlink and ground processing, introducing latency that can limit responsiveness to rapidly evolving turbidity events. To address this limitation, we propose AquaCubeAI, a lightweight machine-learning approach for onboard estimation of coastal water turbidity from Φsat-2 multispectral imagery. By shifting inference from the ground segment to the satellite, AquaCubeAI aims to enable lower-latency, more responsive, and more operationally useful turbidity monitoring under the strict compute and bandwidth constraints of spaceborne platforms. The model is trained on simulated Φsat-2 acquisitions spatially aligned with Copernicus Marine Service (CMEMS) High-Resolution Ocean Color (HR-OC) turbidity products over selected localized coastal sites spanning four European marine macro-regions. To provide a realistic evaluation of generalization in the presence of spatial correlation, we adopt a spatial block splitting protocol that mitigates data leakage between training and evaluation subsets. The main contributions of this work are: (i) a scalable dataset generation pipeline pairing simulated Φsat-2 multispectral patches with CMEMS HR-OC turbidity labels across selected localized European coastal sites; (ii) a compact Multi-Layer Perceptron (MLP)-based turbidity regressor trained under a leakage-aware geospatial split and tailored to embedded constraints; and (iii) a reformulation for dense spatial prediction via parameter sharing, enabling turbidity mapping and simple threshold-based anomaly masks for onboard decision logic. Embedded deployment on an Intel Myriad Vision Processing Unit (VPU) further confirms the feasibility of low-power hardware and supports low-latency inference from multispectral inputs.

0.33

Developing an Offshore Machine Learning Surface Layer Scheme

cs.LG physics.ao-ph ·2026-08-14 ·Susan Dettling, Sue Ellen Haupt, Thomas Brummet, Patrick Hawbecker, Branko Kosović +1 more
similarity 0.61
Abstract · This Work has been submitted to Artificial Intelligence for the Earth Systems

Turbulent fluxes between the surface and the atmosphere are typically parameterized using empirically fit relationships. Here we test machine learning techniques for fitting the relationship for the offshore environment. To do that, data from three offshore sites are used: the Martha's Vineyard Coastal Observatory (MVCO) air-sea interaction tower, the FINO1 research platform, and the CASPER-West FLIP research vessel deployed off the coast of California. Two machine learning methods were employed: Neural Networks (NN) and Random Forests (RF). Because the observational sites had towers with measurements at different levels, the vertical differences were input as gradients. Models were built for both momentum flux and heat flux. ML models trained at the individual sites were competitive with and in some cases, better than the physically-based COARE-3 model tailored to offshore fluxes. The heat flux ML models generally outperformed the physics-based parameterizations for most metrics, but the results were mixed for momentum flux, with only the site with the most training data (MVCO) producing results better than COARE-3. When the ML models from that site were applied to the other sites, results were degraded from using data from the site being tested. ML models built from data combined from the three sites generally showed improvements for the sites with less available training data. When assessing which variables were most important, the wind speed was most important for momentum flux and temperature gradient for heat flux.

0.06

Digital Typhoon Dataset V3: Benchmarking for Multi-spectral Extension and Analyzing Systematic Bias in Intensity Regression

cs.CV ·2026-10-15 ·Asanobu Kitamoto, Victor Le Louarn, Noelia Falczuk, Ngoc Anh Tong, Anja Veleva
benchmarkcode/data similarity 0.57
Abstract · 23 pages, 6 figures, dataset paper

This paper presents the Digital Typhoon Dataset V3, a new version of the longest typhoon satellite image dataset spanning nearly 50 years, designed to benchmark machine learning models on long-term spatio-temporal data. The latest addition to Dataset V3 is multispectral satellite data, enabling multi-channel models. We investigate data-splitting strategies and present benchmarking results for the Northern and Southern Hemispheres. Experimental results show that, under the current dataset construction and experimental setting, multi-channel inputs do not clearly outperform single-channel inputs for pressure regression. Among the evaluated model architectures, image types, and spectral channels, ResNet-18, full-resolution images, and Channel 1 generally provide the best single-channel performance for pressure regression. Performance also differs between the WP and AU datasets by regression target, with lower RMSE on WP for pressure regression and on AU for wind regression. These results highlight the importance of considering dataset-specific and task-specific characteristics when interpreting benchmark performance. Additionally, we analyzed systematic bias in intensity regression, which leads to underestimation of intensity for strong typhoons. We tested imbalance-aware weighting strategies, including inverse-density weighting inspired by BalancedMSE, and showed that these approaches are not sufficient to remove the bias. The dataset is publicly available at http://agora.ex.nii.ac.jp/digital-typhoon/dataset/ and https://github.com/kitamoto-lab/digital-typhoon/.

0.37

Accuracy and efficiency of compact foundation models for surface-water mapping during floods

eess.IV cs.CVcs.LGstat.AP ·2026-10-26 ·Parastoo Farajpoor, Mohammadreza Narimani
code/data similarity 0.57
Abstract · 19 pages, 8 figures, 7 tables. Code: https://github.com/MohammadrezaNarimaniUCDavis/Prithvi_Tiny_Floodwater_GeoAI Data: https://doi.org/10.5…

Pretrained Earth observation models may reduce the effort needed to map surface water, but their value depends on the alternative against which they are compared. We evaluated Prithvi-EO-2.0-Tiny using the 446 hand-labeled Sentinel-2 chips from 11 flood events in Sen1Floods11. A fine-tuned model, a frozen-encoder model, and an identical randomly initialized architecture were compared with a similarly sized U-Net, a larger Prithvi model, and spectral-index thresholds. Experiments varied the number of training chips, excluded events from model fitting, and measured computational cost and prediction reliability. With 252 training chips, U-Net achieved a water intersection-over-union (IoU) of 0.856 on the official test set, compared with 0.833 for fine-tuned Prithvi-Tiny. Pretraining improved the tiny transformer over random initialization by a reported 0.046 IoU with 25 training chips and 0.023 with 252 chips, but did not reverse the U-Net ranking. Across 11 event-exclusion evaluations, mean IoU was 0.768 for fine-tuned Prithvi-Tiny and 0.777 for U-Net; the paired interval included zero. Fine-tuned Prithvi-Tiny processed a 512x512-pixel chip in 16.1 ms on a GPU and 258 ms on a laptop CPU, compared with 30.6 and 665 ms for U-Net. Errors were concentrated near water boundaries, and high predictive entropy identified many, but not all, erroneous pixels. These results support a specific role for compact pretrained models: lower measured computational demand with competitive accuracy, rather than consistent superiority. Event-dependent performance, shared hyperparameter selection, and the distinction between observed water and newly inundated land delimit the conclusions.

0.36

Deep Learning Denoising of Real SWOT Sea Surface Height Observations

cs.LG physics.ao-pheess.IV ·2026-09-22 ·Gaétan Meis, Anaëlle Tréboutte, Maxime Ballarotta, Marie-Isabelle Pujol, Gérald Dibarboure
benchmark similarity 0.56
Abstract · This Work has been submitted to JTECH (Journal of Atmospheric and Oceanic Technology). Copyright in this Work may be transferred without fur…

The SWOT (Surface Water Ocean Topography) mission is currently providing unpreceded high-resolution measurements of Sea Surface Height (SSH), revealing ocean features at finer scales. Nevertheless, the two-dimensional observations of KaRIn altimeter of SWOT suffer from instrumental errors. This noise degradation is altering the high frequencies of SWOT signal, and the small to sub-mesoscale dynamics of interest for some oceanographers. For this reason, Tréboutte et al. (2023) have developed a convolutional neural network (CNN) based on U-Net architecture to separate the noise from the physical signals contained in the SSH. Their approach has demonstrated great potential on simulated SWOT measurements, and Dibarboure et al. (2024) report a positive influence on actual flight data from SWOT. However, degraded denoising performance, and occasional negative side-effects have been observed in atypical conditions (e.g. very high surface waves, internal tides solitons). In this study, we illustrate some of these limitations and we present an improved approach of the CNN-based denoising: we modified the training procedure to obtain a more robust version of the algorithm, to avoid biases and artifacts in the denoised SSH. This paper also presents a more complete validation process with a robust and standardized evaluation benchmark: these metrics could be of interest to assess other SWOT filtering and denoising algorithms.

0.23

UniqueShip: Mitigating Data Leakage in Acoustic Ship Classification Benchmark Datasets

cs.SD cs.CVeess.AS ·2026-09-12 ·Connor Hashemi, Trevor Stout, Anthony Hoogs, Jason Parham
top venuebenchmark similarity 0.56
Abstract · 9 pages paper, 4 pages supplementary at the end, accepted/will be published at Oceans 2026. Note that while this is underwater acoustics, we…

Underwater Acoustic Target Recognition (UATR) of ships is well-suited for machine learning, yet its progress is hindered by the lack of large, diverse, and publicly available labeled datasets. In this work, we introduce UniqueShip, a machine learning-ready benchmark dataset for UATR applications sourced from the open Ocean Networks Canada (ONC) repository. Unlike previous datasets, we explicitly control for "data leakage" between the training and evaluation sets to ensure more reliable and generalizable model evaluation that does not encourage the model to memorize individual ships. We demonstrate that typical, random data partitioning in two prominent UATR datasets leads to falsely optimistic test performance, increasing accuracy by 10-48 percentage points compared to our more careful partitioning. Ablations on UniqueShip further show that doubling the number of unique vessels improves accuracy by 2.4-2.6 percentage points, while doubling total audio duration improves only by 0.8-1.3 points, indicating that vessel diversity should drive dataset curation more than total hours. We provide baselines with convolutional and transformer backbones, and analyze how ship metadata correlates with classification performance, finding that individual vessel characteristics predict classification difficulty far better than distance to the hydrophone alone. Overall, UniqueShip contains 2,460 hours of ship-radiated audio from 4,218 unique vessels (3,437 hours including background). We publish the dataset, code, and easy-to-download splits at uniqueshipdata.org to foster further UATR research.

0.70

A Model-Agnostic Physics-Guided Adapter for Few-Shot Transfer of Coastal Flood Prediction Models to Unseen Regions

cs.LG ·2026-09-29 ·Bilal Hassan, Areg Karapetyan, Samer Madanat
similarity 0.55
Abstract

Deep learning surrogates can produce high-resolution coastal flood maps orders of magnitude faster than physics-based hydrodynamic simulators, yet transferring them to new coastal regions remains costly, since generating target-region data for fine-tuning typically requires numerous time-consuming simulations. To tackle this bottleneck, we introduce the Physics Adapter (PA), a compact, architecture-agnostic adaptation interface that enables efficient few-shot transfer of flood prediction models across diverse coastal regions. PA predicts peak water level through a differentiable wet/dry response that compares terrain elevation against a learned water level, and blends this physics-structured prediction with a data-driven branch through a learned gate. Unlike physics-informed formulations, PA imposes no PDE-residual or conservation losses and instead exploits elevation as an architectural inductive bias, adding a negligible number of trainable parameters. We integrate PA into 12 heterogeneous models, and evaluate them on two coastal regions with markedly distinct geometries, topographies, and shoreline protection configurations. The performance of PA is benchmarked against a no-physics baseline, full fine-tuning, and standard parameter-efficient fine-tuning (PEFT) methods, considering both within-region generalization to unseen sea level rise values and between-region transfer. In low-shot regime (K=3), and averaged over all backbones and transfer settings, adding PA reduces root mean square error by 11.5% when only the output head is adapted on a frozen backbone, by 15.4% when combined with PEFT methods, and by 22.9% under full fine-tuning, compared to matched configurations without PA. Taken together, the findings of this work offer practitioners a concrete recipe for extending DL-based coastal flood predictors to new, data-scarce regions.

0.26

Comparative Assessment of Deep Learning Architectures for Underwater Subsurface Kelp Forest Segmentation with The Kelp-o-Tron

cs.CV ·2026-08-25 ·Sundarabalan Balasubramanian, César Borja, Ana C. Murillo, Lexi N. Wilkes, Meredith L. McPherson +3 more
similarity 0.54
Abstract

Submerged kelp forests are vital coastal ecosystems that support marine biodiversity and ecosystem dynamics, yet accurate underwater kelp segmentation remains challenging due to optical degradation, illumination variability, turbidity, overlapping vegetation, and complex benthic backgrounds. We systematically evaluated three deep learning semantic segmentation frameworks, ResNet34-U-Net, ResNet50-DeepLabV3, and a hybrid ResNet50-ASPP-Transformer architecture, for kelp detection using high-resolution underwater RGB imagery collected from northeastern U.S. coastal waters. A dataset of 3,395 SSeg assisted annotated image-mask pairs was developed for model training and validation, while geographically independent sites were used for quantitative and qualitative evaluation. All models used consistent preprocessing, augmentation, and evaluation protocols. On independent test data, ResNet50-DeepLabV3 achieved the highest Dice (0.7120) and Intersection over Union (IoU; 0.6267), followed by ResNet34 U Net (Dice 0.6868; IoU 0.5978). The hybrid ASPP Transformer achieved the highest pixel accuracy (0.8528) but lower Dice (0.6437) and IoU (0.5746). External qualitative evaluation further showed that DeepLabV3 produced more consistent segmentation across varying environmental conditions, image qualities, and benthic habitats. Overall, ResNet50-DeepLabV3, termed Kelp-O-Tron, provided the best balance of segmentation accuracy, robustness, and generalization. The dataset, annotation workflow, and comparative evaluation provide resources for advancing automated underwater habitat mapping and ecological monitoring.

0.21