CS Paper Radar

I Won't Know Until I Try: Interactive Information Gathering for Long-Horizon Manipulation

Linfei Yuan, Rachel Holladay

cs.RO ·submitted 2026-10-25 00:21 UTC · v1

Abstract

Long-horizon manipulation often depends on object properties that cannot be reliably inferred from appearance alone. Physical interaction can reveal these properties, but it can also change the world in ways that invalidate subsequent actions. We present a task and motion planning (TAMP) framework that integrates task-directed interactive information-gathering with interleaved planning and execution. Building on PDDLStream, our framework plans optimistically with these interactive actions, verifies their outcomes during execution, and adapts the remaining plan by retaining still-applicable actions and replanning only the connections needed to continue execution. We evaluate the framework in simulation and on a real robot across tasks that require determining whether an object is movable, a pen has ink, a drawer can be opened, or a container is empty. These experiments demonstrate how interaction-driven state updates and recovery replanning support continued execution under uncertain outcomes and external disturbances.

Comment
8 pages. Under review

Closest papers

Nearest neighbours by meaning across the whole index.

Deciding If, When, and Where to Replan for Robust Manipulation

cs.RO ·2026-08-28 ·Narendhiran Vijayakumar, Puru Ojha, Nav Singhal, Girish Varma, Antony Thomas
code/data similarity 0.76
Abstract · Submitted to AAMAS'27

Foundation-model (FM) based task and motion planning (TAMP) methods typically assume that the full scene is known before planning. In long-horizon manipulation, however, relevant objects may initially be hidden and only become observable as the robot interacts with the environment. We introduce Robust-TAMP, a task and motion planning framework that first decides whether a discovery needs a replan. If replanning is needed, the robot executes unaffected actions while the FM synthesizes corrective actions. These actions are inserted into the existing plan based on urgency, either executed immediately or deferred while preserving the remaining plan. We evaluate Robust-TAMP on 14 MuJoCo environments with hidden objects, blocked placements, articulated containers, and multi-step tasks, and on five real-world settings. Our proposed method completes 92.1% of simulated tasks, outperforming four baseline comparison architectures by 47.1 percentage points under the same settings. Ablations show that each component either raises success or lowers planner calls, planning time, and robot idle time. An extensive study across model sizes, text and vision inputs, reasoning modes, and prompting further shows that in-context examples help the planner follow multi-step procedures that zero-shot prompting struggles with. Our implementation code and project details are available at https://narendhiranv04.github.io/ROBUST-TAMP/.

0.38

MotionForge: A Data Generation Pipeline and Large-Scale Benchmark for Long-Horizon Manipulation of Dynamic Objects with Domain Shifts

cs.RO ·2026-09-22 ·Mohan Liu, Dengchen Mei, Haotian Xian, Ruyang Han, Jiayi Sun +5 more
benchmark similarity 0.74
Abstract · 9 pages

Recent advances in learning-based robot policies have demonstrated promising progress, yet they are predom- inantly evaluated in static or quasi-static environments. In dynamic manipulation, objects and scenes continuously evolve while the robot perceives, reasons, and acts. However, recent dynamic simulation benchmarks largely focus on short-horizon, reactive interactions with simple motion patterns and offer limited support for both systematic evaluation under domain shifts and model-agnostic real-time execution protocols. To bridge these gaps, we introduce MotionForge, the first large- scale simulation benchmark and data-generation pipeline tailored to jointly evaluate domain shifts and long-horizon interaction in dynamic manipulation. MotionForge comprises 40 dynamic interaction tasks spanning 11 distinct motion patterns, with dedicated support for 17 long-horizon tasks. Our benchmark introduces two key novelties: (1) a systematic evaluation protocol for assessing policy robustness under both single-factor (e.g., only backgrounds shift) and joint domain shifts (e.g., simultaneous shifts of objects, backgrounds, lighting, and speed); and (2) a decoupled, latency-aware execution protocol where the environ- ment continuously evolves independently of policy inference time. Extensive evaluations of representative general-purpose robot policies on our benchmark reveal substantial limitations under joint domain shifts. These findings expose a critical gap between current policy capabilities and the requirements of robust long- horizon manipulation of dynamic objects under domain shifts, establishing MotionForge as a comprehensive testbed for future research in embodied AI.

0.21

Leveraging Inter-object Affordances for Efficient Planning in Contact-rich Tasks

cs.RO cs.AI ·2026-08-26 ·Pouya P. Niaz, Justus Piater, Alejandro Agostini
similarity 0.72
Abstract

Traditional task-and-motion planning (TAMP) approaches primarily focus on defining sequences of actions along with the necessary geometric and kinematic constraints to execute long-horizon tasks. However, their applicability in real-world settings is limited, as they typically assume simplified object models that overlook key physical properties critical for the successful execution of contact-rich tasks. Moreover, they often use sub-symbolic reasoning during motion planning, which drastically increases planning time and decreases overall success rates. We propose a method that leverages a TAMP approach, defining object-centric abstractions of execution constraints, called Unified TAMP (U-TAMP), to execute robotic tasks involving interactions among objects with heterogeneous shapes, sizes, and materials. Using a Vision-Language Model (VLM), we generate abstractions of inter-object affordances for characterizing physical interaction constraints between objects in contact-rich tasks, such as grasp and support constraints. These constraints are used to enrich the U-TAMP planning domain to deal with objects with variable physical properties. We perform experiments in simulated kitchen table organization scenarios and compare our results with those of the original U-TAMP, as well as a state-of-the-art VLM-based planner that leverages common sense knowledge of objects' affordances for plan generation. Our approach achieves significantly higher planning success rates and improves planning times by one to two orders of magnitude compared to other methods.

0.16

Dynamic Manipulation with World-Action Models via Counterfactual Planning

cs.RO cs.AIcs.CVcs.LG ·2026-09-27 ·Sunwoo Park, Wonbin Lee, Seonghyun Jin, Youngmin Kim, Jangho Park +1 more
code/data similarity 0.71
Abstract · 48 pages, including appendices. Project page: https://methoder00.github.io/DPP/

World-Action models (WAMs) trained on static demonstrations often fail to manipulate moving targets even when they possess the required manipulation skills. We attribute this failure to target-response collapse: as execution advances, the policy becomes increasingly biased toward the learned continuation of its ongoing behavior and less responsive to target relocation. To bridge the gap between what the model has learned and what it can generate from the current context, we formulate dynamic manipulation as counterfactual planning by decoupling the context used for plan generation from the physical state used for execution. Our framework, Dynamic Predictive Planning (DPP), first uses the WAM's predictive rollout to estimate when an interaction is expected to occur, and combines this timing estimate with observed target motion to predict the target's future interaction position. DPP then constructs a counterfactual observation that places this predicted target position in a familiar robot context, allowing the model to invoke an existing manipulation skill rather than generate a recovery behavior from an unfamiliar robot-target configuration. The resulting plan is connected to the robot's actual state during execution. DPP enables real-time dynamic manipulation on a single consumer GPU without additional training on dynamic data. Experiments in simulation and on a real robot demonstrate consistent improvements across diverse target motions, with simulation performance surpassing all evaluated baselines, including methods additionally trained on dynamic data. Project page: https://methoder00.github.io/DPP/

0.56

RoboQuest: Generalist Physical Agents that Search, Inspect and Test

cs.RO cs.AIcs.CV ·2026-10-07 ·Liu Renhang, Navonil Majumder, Tej Deep Pala, Soujanya Poria
benchmark similarity 0.70
Abstract

Recent advances in multimodal foundation models have made them capable generalist physical agents for a range of manipulation tasks. However, successful operation in an unfamiliar environment may require an agent to seek task-relevant information through interaction when it is absent from the observations: it may need to determine where a relevant object is, inspect an unobserved property, or discover the effect of an unfamiliar tool. We thus introduce RoboQuest, a benchmark for goal-directed embodied exploration, where agents must actively acquire task-relevant information through physical interaction, use the resulting evidence to adapt subsequent actions, and autonomously decide when to commit to task completion. RoboQuest comprises ten mobile manipulation tasks centered on three forms of uncertainty: search, manipulation-based inspection, and interactive testing. We evaluate five frontier multimodal agents through a common visuomotor interface, as well as a $π_{0.5}$ policy fine-tuned on the full-episode demonstrations we release. The best agent succeeds in only 23\% of the episodes, and the fine-tuned policy almost never succeeds. Isolated tests of the execution skills the tasks are built from, with the hidden information supplied, show that the agents can carry out most of the required actions, and our failure analysis attributes only a minority of the failures to execution. Our failure analysis further finds that the agents often stop exploring too early as they make decisions before observing the required evidence for task completion. We also find that agents rarely prevent or repair the disturbances caused by their exploration. Moreover, learning by trial and error remains difficult for most models.

0.20

RobotWorld: Benchmarking Multimodal Agents for Robot Use Across Diverse Tasks and Embodiments

cs.RO cs.LG ·2026-10-07 ·Zhiqin Yang, Chenxin Li, Xiaomeng Hu, Yibin Liu, Weidong Huang +28 more
similarity 0.70
Abstract · 62 pages, 25 figures

General-purpose agents increasingly write code, use tools, and complete complex digital tasks, raising the question of how far these capabilities carry into the physical world. To investigate this, we introduce RobotWorld, a challenging simulation testbed for robot use: turning instructions and observations into physical task execution through robot interfaces. Its 84 tasks span manipulation, mobile manipulation, locomotion, driving, and aerial control, with explicit interaction budgets and executable success checks. By analysing task outcomes alongside execution traces, we identify both the capabilities that transfer and the gaps that prevent reliable completion. Furthermore, we find that current agents can construct sophisticated perception and control workflows, including image segmentation, camera calibration, spatial estimation, and dynamics-based computation. These capabilities, however, do not consistently compose into successful behaviour: agents lose task-relevant object states despite reaching commanded poses, fail to correct ineffective actions, recover too late, or mistake unfinished tasks for completion. This uneven transfer also differs across models: Astra succeeds more often on spatial and constrained-contact goals, whereas Opus 5.5 succeeds more often on continuous-balance and timed-interaction goals. By linking these outcomes to execution behaviour, RobotWorld provides both a rigorous proving ground and an empirical account of the remaining capability gaps, thereby establishing concrete targets for training and designing more reliable physical-world agents.

0.48

Visibility-Aware Task and Motion Planning with Task-Centric Perception

cs.RO ·2026-11-12 ·Sahit Chintalapudi, Xiaoyan Wang, Aryan Zoroufi, Aditya Agarwal, Nancy Kanwisher +2 more
similarity 0.70
Abstract

Long-horizon manipulation under uncertainty remains a challenging problem in robotics. We present \ourmethod{}, an algorithm for Visibility-Aware Task and Motion Planning. \ourmethod{} extends existing deterministic task and motion planning solvers to partially observable object rearrangement tasks, while still being able to take advantage of the efficiency and compositional generalization over long horizons of the base solver. This extension interleaves sensing actions into a plan skeleton that assumed full observability, and uses a novel persistent object-based memory to fuse observations into object mesh hypotheses and an observed occupancy map. We evaluate \ourmethod{} on real-world tabletop rearrangement tasks which feature heavy occlusion and partial visibility and demonstrate that it outperforms baselines that do not perform active perception or have persistent memory.

0.19

RobotUse: Allocating Computation, Context, and Decisions

cs.RO ·2026-10-04 ·Junhoo Lee, Injun Baek, Seungyeon Kim, Suhyun Jeon, Minkyu Kim +2 more
code/data similarity 0.70
Abstract · 18 pages, 10 figures, 11 tables. Project page: https://robotuse-team.github.io/

Robot agents must connect their intended actions to observed outcomes while retaining the context needed to revise their choices over repeated attempts. Existing interfaces often leave these choices inside predefined tools or require agents to manage detailed execution code and its growing history. We introduce RobotUse, a robot agent harness that organizes computation, context, and decisions around specifying and revising physical actions. Agents visually select targets and poses, while the backend handles geometry, motion planning, and control. Subagents retain detailed interactions within each subgoal and return the information needed for subsequent decisions. Continual harnessing lets agents learn from execution by updating a persistent playbook. On RoboLab, RobotUse achieves 45% task success, outperforming CaP-X by 6.7 percentage points while maintaining compact decision contexts and reducing reliance on predefined action abstractions. Furthermore, we show that RobotUse learns from real-world execution despite imperfect feedback and transfers what it learns to subsequent tasks. Project page is available at https://robotuse-team.github.io/.

0.33