CS Paper Radar

Hybrid Mamba-Transformer Network for Single-Shot 3D Reconstruction from Fringe Patterns

Xinjie Zhou, XiaoLei Li

cs.CV physics.optics ·submitted 2026-10-25 01:58 UTC · v1

Abstract

Deep learning facilitates rapid single shot three dimensional (3D) reconstruction using fringe projection profilometry (FPP), but recovering accurate surface height from a single high frequency fringe image remains challenging because both long-range spatial consistency and fine geometric details must be preserved. Convolutional networks are limited in modeling long range dependencies, whereas window-based Transformers establish global interactions only progressively with increasing depth. To address these limitations, a hybrid Mamba Transformer network is proposed for fringe to height regression. The network adopts a Swin based U shaped architecture and introduces visual state space modeling at the intermediate resolution encoder stage. An axial and dilated vision state space (ADVSS) block is further developed to enhance prescan feature encoding through local, dilated, and axial depthwise convolutions while retaining four directional selective scanning. This design combines linear complexity long range modeling with direction aware preservation of local fringe structures. Experiments on a publicly available FPP dataset show that the proposed method outperforms hNet, SwinConvUNet, UHRNet, and HiDNet in mean absolute error(MAE), root mean square error (RMSE), absolute relative error, and structural similarity index measure (SSIM). Using only one deformed fringe image, the proposed method achieves an RMSE of 0.548 mm and an SSIM of 0.9985, reducing RMSE by 65.2% and 59.6% relative to UHRNet and HiDNet, respectively. These results demonstrate the effectiveness of combining selective state space modeling with hierarchical window based attention for accurate single-shot FPP reconstruction.

Closest papers

Nearest neighbours by meaning across the whole index.

RACE-FPP: A Robust AI-assisted Characterisation Enhancement for Fringe Projection Profilometry

cs.CV eess.IVphysics.optics ·2026-10-06 ·Osman Ali, Xiangjun Kong, Tibebe Yalew, Waiel Elmadih, Samanta Piano
similarity 0.64
Abstract · 19 pages, 9 figures, 7 tables

Fringe Projection Profilometry (FPP) requires precise system characterisation to achieve reliable three-dimensional (3D) reconstructions; however, characterisation accuracy strongly depends on robust checkerboard feature localisation, which can deteriorate under challenging imaging conditions such as lens blur and characterisation target orientations. Existing deep learning-based corner detectors are typically assessed using detection metrics and camera reprojection error alone, without considering their wider impact on projector characterisation, camera-projector stereo characterisation consistency, or overall measurement accuracy. In this work, we introduce a complete FPP characterisation pipeline that incorporates deep learning-based corner detection into the standard camera characterisation workflow. We also characterise the projector by sampling phase values at the centres of the white squares in the characterisation target. Rather than treating corner detection as an isolated task, the proposed framework explicitly analyses how localisation errors propagate throughout the entire FPP characterisation chain. Performance is evaluated using detection metrics (e.g., precision and recall), camera and projector reprojection errors, and the camera and projector stereo characterisation. Across a mixed dataset of clean and degraded images, the camera reprojection error is reduced from 1.237 pixels to 0.259 pixels, while the projector reprojection error is reduced by roughly 50%. Dimensional evaluation of reconstructed artefacts shows improved geometric accuracy compared with those resulting from the conventional pipeline. Overall, the findings indicate increased robustness of system-level characterisation under challenging imaging conditions, thereby enabling more reliable industrial FPP measurements.

0.26

Robust structure from motion for aerial-ground images via detector-free feature matching and multi-view track refinement

cs.CV ·2026-08-15 ·San Jiang, Hui Wang, Xing Zhang, Zhongwen Hu, Zhijun Wang +3 more
similarity 0.60
Abstract

Integrated 3D reconstruction from aerial-ground images is essential for generating high-precision urban 3D models, yet severe variations in viewpoint, scale, and rotation make robust feature matching highly challenging. To address these limitations, this study introduces a rotation-robust detector-free matching network coupled with multi-view track refinement for incremental Structure from Motion (ISfM). The proposed workflow features four key modules. First, rotation-aware feature extraction replaces traditional convolutions with an Omnidirectional State Space Block (OSS Block) that selectively scans across eight symmetrical directions to model long-range spatial dependencies and synthesize rotation-invariant feature maps. Second, multi-scale attention transformation utilizes quadtree attention to build a hierarchical token pyramid that isolates high-association token regions and discards irrelevant areas, capturing long-range context with linear computational complexity. Third, bi-directional feature matching executes a symmetric coarse-to-fine matching scheme where coarse alignment computes dual-direction Softmax confidence matrices under mutual nearest neighbor constraints, and fine alignment uses a multi-layer perceptron to regress sub-pixel coordinate offsets. Finally, multi-view track refinement employs an integrated indexing structure to evaluate localized spatial proximity and link disjoint sub-tracks to the highest-confidence anchor point, ensuring stable feature repeatability across the ISfM pipeline. By using real aerial-ground datasets, experimental results demonstrate that the proposed method improves AUC at 5° pose error by 93.9% compared with LoFTR and achieves the highest precision in ISfM reconstruction, with the improved accuracy ranging from 27.6% to 32.7%. The proposed method provides a reliable solution for integrated 3D reconstruction of aerial-ground images.

0.04

One Block, Multiple Depths: Recurrent Vision Transformers with Depth-Programmed Experts

cs.CV cs.LG ·2026-10-08 ·Adrian Bulat, Yassine Ouali, Georgios Tzimiropoulos
similarity 0.58
Abstract

In this work, we show that a single Transformer block, applied recurrently, can match the accuracy of a full-depth vision encoder at comparable inference FLOPs without intermediate feature distillation. reViT restores depth-specific transformations by representing the FFN at each recurrent depth as a convex combination of a small shared expert bank. A continuous normalized-depth coordinate programs this mixture, defining a resampleable trajectory through FFN parameter space. We evaluate this design in two regimes: supervised ImageNet-1k training and distillation from a DINOv2 teacher. Across both regimes, controlled adaptations identify weight-space merging as the strongest tested MoE family at a matching one-FFN budget, ahead of the token-dispatch and output-mixture alternatives. Trained from scratch, reViT-B/16 attains DeiT III accuracy with about 70\% fewer stored parameters. An 8-experts model distilled using only the teacher's output features retains nearly all of its DINOv2 teacher's linear-probe accuracy and transfers across classification, segmentation, and depth prediction. Elastic-depth training allows one checkpoint (trained model) to operate at multiple tested depths by resampling the same normalized coordinate interval. For fixed-depth deployment, the recurrent block can be materialized as a conventional dense graph, removing online routing and merging without changing the one-FFN-per-depth compute but expanding deployment storage.

0.38

PhasorNet: Learning Structure from Frequency for Real-Time Stereo Matching

cs.CV ·2026-08-30 ·Md Raqib Khan, Santosh Kumar Vipparthi, Subrahmanyam Murala
benchmark similarity 0.58
Abstract

Accurate stereo matching remains challenging in ill-posed regions such as fine structures, reflective, or transparent objects, where appearance cues are often ambiguous or unreliable. To tackle this, we propose PhasorNet, a lightweight yet powerful framework that boosts geometric discrimination via frequency-domain cues. At its core, the Phase-Augmented Transformer (PAT) injects Fourier-derived phase information into the attention mechanism, yielding photometrically robust, structure-preserving features that prioritize structural consistency in difficult areas. Additionally, we develop a Geometry-Context Fusion Refinement Module (GCFRM) that combines a full-resolution convolutional stream with a lightweight attention-based stream (leveraging WQA and CDGA blocks) to efficiently preserve fine details and object boundaries without excessive overhead. Training is further enhanced by a multi-scale Edge-guided High-Error Region (EHR) loss that adaptively focuses optimization on high-error and edge regions, guiding hierarchical cost volume refinement. With only 5.3M parameters, PhasorNet achieves state-of-the-art performance on the challenging ETH3D benchmark while exhibiting excellent cross-domain generalization on KITTI, delivering an efficient and practical solution for accurate real-time stereo matching.

0.17

FSANet: Frequency-Spatial Aware Network for Image Segmentation

cs.CV ·2026-09-15 ·Ruibo Wang, Ziyi Shen, Huaming Wu, Dong Liang, Kun Shang
benchmarkdatasetcode/data similarity 0.57
Abstract · 13 pages

Image segmentation remains challenging due to occlusions, poor lighting, and irregular structures. Although transformer-based methods achieve high accuracy, they rely heavily on long-range spatial features, leading to high computational costs and neglecting prior knowledge or noise patterns, resulting in missing details and unclear boundaries. To address these issues, we propose Frequency Spatial Aware Network (FSANet), which integrates prior knowledge with a dual-domain solver to sequentially adapt to diverse segmentation tasks. Specifically, we design three key modules: (1) Structure Prior Module, which recovers overlooked details; (2) Dual-Domain Awareness Module, which captures salient features while disentangling noise; and (3) Edge Estimation Module, which enhances edge awareness for more precise segmentation. In addition, the limited availability of comprehensive segmentation datasets covering various real-world scenarios hinders the performance of existing methods. To address this, we introduce SceneX, a novel open-source dataset featuring 10 challenging non-ideal scenarios, establishing a new benchmark for evaluating and improving the robustness and real-world applicability of the segmentation models. Extensive experiments demonstrate the efficiency and effectiveness of FSANet.

0.32

On-Device Super-Resolution Imaging for a Low-Cost SPAD Array on a 640-KB-SRAM Microcontroller

eess.IV ·2026-10-06 ·Zhenya Zang, Istvan Gyongy, Mike Davies
similarity 0.57
Abstract

This work presents a super-resolution (SR) deep-learning (DL) architecture to simultaneously upscale low-resolution (LR) depth and intensity images acquired by a consumer-grade VL53L9CX time-of-flight (ToF) sensor, a compact single-photon avalanche diode (SPAD) ranging device, while targeting deployment on a resource-constrained microcontroller (MCU) with only 640 KB SRAM and 2 MB Flash. The VL53L9CX provides 54 $\times$ 42 depth and intensity measurements. The proposed framework performs $\times$4 spatial SR to reconstruct 216 $\times$ 168 depth and intensity images simultaneously. The network employs separate reconstruction branches for intensity and high-resolution (HR) depth. We train the network with efficient loss functions and investigate the performance by testing multiple compact, hardware-oriented backbones, including Spatially Adaptive Feature Modulation (SAFM), Swift Parameter-Free Attention Network (SPAN), and Residual Local Feature Network (RLFN). We evaluate the network on both synthetic and real measurements, with particular attention to constrained activation and memory storage. We export the selected network to ONNX, quantize it to INT8, generate C inference code for an STM32H563ZI Arm Cortex-M33 MCU, and integrate it with our simplified sensor's firmware. This work is the first to demonstrate a compact DL SR model on a low-cost bare-metal MCU for a consumer-grade LR SPAD sensor, integrated with customized MCU firmware to enable on-device SR inference.

0.22

FreeTransformSR: Efficient Lightweight Image Super-Resolution via Free Low-Rank Learnable Transform

cs.CV ·2026-09-05 ·Hongji Li, Yunhui Li, Jianing Wang, Xiaodong Wan
benchmark similarity 0.56
Abstract · 16 pages, 2 figures

Single image super-resolution aims to reconstruct high-resolution images from low-resolution inputs. This paper proposes FreeTransformSR, a novel lightweight super-resolution network based on a channel-wise free low-rank learnable transform. The transform learns task-adaptive basis functions in a data-driven manner, enabling adaptive feature modulation with minimal parameter overhead. To further enhance high-frequency detail recovery, we in-troduce a local feature modulation branch that complements transform-domain processing with depthwise convolu-tion. In addition, a soft complexity adaptive module dynamically fuses the outputs of local convolution and window self-attention branches through a lightweight gating network, adaptively adjusting the fusion ratio based on regional texture characteristics. An adaptive intensity modulation strategy is also incorporated to adjust transform-domain response strength at the sample level, enabling the network to dynamically adjust processing intensity according to input features. Extensive experiments on five benchmark datasets demonstrate that FreeTransformSR achieves competitive PSNR/SSIM performance with significantly fewer parameters and FLOPs. Specifically, FreeTransformSR achieves 32.41 dB on BSD100 (X2, 634K parameters) and 27.00 dB on Urban100 (X4, 653K parameters), while delivering faster inference speed than competing methods, making it well-suited for deployment in resource-constrained scenarios.

0.25

MIR-Depth: Multi-Range Refinement for Single-View RGB-D Depth Completion of Transparent Objects

cs.CV cs.RO ·2026-11-19 ·Xinzhe Fu, Qi Shao, Yuanfei Xie, Taoyu Wu, Zhihao Cao +6 more
similarity 0.56
Abstract · 9 pages

Recovering accurate visible-surface depth from a single RGB-D image and an object mask is essential for robotic grasping and manipulation of transparent objects. Specular reflections cause missing depth, while refraction corrupts nonzero returns with background depth, making raw measurements unreliable as surface anchors. Under a fixed sampling budget, refining an initial single-view prediction within a single search interval either misses large refraction offsets or sacrifices fine local resolution. To resolve this single-view trade-off, MIR-Depth constructs Coordinate-Aware Multi-Range Hypotheses: a 3D-aggregated global inverse-depth volume and depth-axis-filtered pixel-wise local volumes around a prior-guided initial depth. Selective Recurrent Refinement then introduces out-of-bounds lookup masking and validity-masked softmax fusion to iteratively update inverse depth from these volumes using a multi-scale ConvGRU. Finally, Spatially Gated Correction applies a learned per-pixel spatial gate to the full-resolution residual, preserving accurate initial geometry without imposing raw sensor readings as hard constraints. Experiments on TransCG, TODD, TRansPose, ClearPose, and HouseCat6D show that MIR-Depth achieves lower error than ReMake, DFNet, BP-Net, and PSD. Real-robot evaluations confirm accurate surface geometry for 6-DoF grasp pose prediction. Code and pretrained models will be publicly available.

0.26