CS Paper Radar

RIS-Assisted Downlink Pinching-Antenna Systems With NLOS Environments

Yue Geng, Kah Chan Teh, Tee Hiang Cheng

eess.SP ·submitted 2026-10-25 13:08 UTC · v1

Abstract

This paper investigates a reconfigurable intelligent surface (RIS)-assisted downlink pinching-antenna system (PASS) in the presence of non-line-of-sight (NLOS) users caused by unavoidable obstacles. An RIS is deployed to extend the coverage of the physically constrained PASS by establishing virtual line-of-sight (LOS) links. To improve system performance, we propose a zero-forcing (ZF) beamforming-based alternating optimization (AO) framework that minimizes the transmit power by jointly optimizing the RIS reflection coefficients and pinching-antenna (PA) activation positions. Specifically, the RIS reflection coefficients are optimized using the Riemannian conjugate gradient (RCG) method, while a novel projected gradient-based method is developed to efficiently optimize the PA activation positions. Simulation results demonstrate that the proposed AO framework outperforms baseline schemes in terms of both transmit power and computational efficiency under different system configurations including the rate requirements and RIS sizes.

Comment
6 pages, 4 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Dynamic Metasurface-Enabled Generalized Pinching-Antenna Systems

eess.SP ·2026-10-25 ·Shan Shan, Chongjun Ouyang, Yufei Zhao, Zhiguo Ding, Yong Liang Guan
theoryhot direction similarity 0.66
Abstract

This article investigates dynamic metasurfaces as an electronic realization of generalized pinching antennas (GPA). By jointly optimizing the locations and radiation coefficients of activated elements, the dynamic metasurface-enabled GPA (DM-GPA) architecture exploits additional design flexibility to enhance spatial reconfigurability beyond that attainable through antenna placement in the conventional pinching-antenna system (PASS). Based on this architecture, we study weighted sum rate (WSR) maximization for multiuser downlink transmission. 1) For two-user transmission, the sum-rate improvement of DM-GPA over conventional PASS is quantified through a lower bound that reveals when the benefit of channel orthogonalization achieved by adjusting the radiation coefficients outweighs the channel power loss caused by the Lorentzian constraint. Furthermore, when conventional PASS yields a rank-deficient channel, DM-GPA is shown to achieve spatial multiplexing and transmit diversity, with a strict sum-rate advantage at sufficiently high signal-to-noise ratios. 2) For general multiuser transmission, a weighted minimum mean-square error (WMMSE)-based alternating optimization algorithm is developed for joint pinching beamforming and digital precoder design. A sequential element-wise search is developed to optimize the locations of the activated elements, with a closed-form solution for the radiation coefficient at each candidate location. Numerical results are provided to demonstrate that: (i) DM-GPA achieves higher WSR than other PASS architectures and fixed-array benchmarks, (ii) increasing the number of activated elements further improves the WSR of DM-GPA, and (iii) radiation coefficient adjustment is particularly beneficial when candidate activation locations are limited.

0.27

Tri-Hybrid Beamforming for T-RIS-Enabled Base Station

cs.IT ·2026-08-20 ·Hongtao Zhang, Chenlong Ding
similarity 0.65
Abstract

Transmissive reconfigurable intelligent surfaces (T-RISs) integrated into the transmitter provide a viable realization of tri-hybrid multiple-input multiple-output (MIMO), where spatial processing is distributed across the digital, analog radio-frequency (RF), and electromagnetic (EM) domains. However, unlike conventional RIS-assisted links, a transmitter-native T-RIS directly participates in radiation formation, making T-RIS front-end modeling and weighted sum-rate (WSR)-oriented joint precoding challenging under practical hardware constraints. This paper develops a unified modeling and precoding framework for transmitter-native T-RIS tri-hybrid multi-user (MU) downlink transmission. Specifically, starting from a continuous-field description, the received field is characterized by the interaction among the feed array, the programmable T-RIS aperture, and the user-side propagation, leading to a cascaded baseband input-output model for MU precoding. Furthermore, the same representation is instantiated in the Fresnel, Fraunhofer, and mixed-field regimes, so that near-field focusing and far-field angular steering can be handled within one front-end model. Additionally, a WSR maximization problem is formulated over the digital precoder, analog network, and T-RIS coefficients under power and quantization constraints. A two-level solver is then developed by coupling outer weighted minimum mean-square error (WMMSE) updates with WMMSE-induced aperture-field shaping and hardware projection. Simulations validate the modeling accuracy and convergence, and show that the proposed full tri-hybrid design improves WSR over baselines while suppressing mixed-field cross-regime leakage.

0.17

Learning-Assisted Beamforming Optimization for Hybrid XL-RIS-Aided Communication

cs.IT ·2026-11-07 ·Awuni Mohammed Abdul-Razak, Kyungchun Lee
similarity 0.64
Abstract · 13 pages, 8 figures

Hybrid active-passive extremely large-scale reconfigurable intelligent surface (XL-RIS) architectures mitigate the double-hop path loss of passive RIS while enabling near-field spatial energy focusing, but impose a computationally intensive mixed discrete-continuous beamforming design problem under strict radio-frequency (RF) power constraints. This paper investigates a hybrid XL-RIS-assisted downlink multi-user multiple-input single-output (MU-MISO) system in the near-field regime. The joint optimization of the base station (BS) precoder, discrete XL-RIS phase shifts, and active-element amplification gains is addressed via a discrete coordinate ascent (DCA)-based alternating optimization (AO) framework, in which discrete variables are updated through local index-domain searches and the BS precoder is derived in closed form via a noise-aware minimum mean-square error (MMSE) criterion. To reduce the per-sample computational cost for XL-RIS apertures, a deep unfolding (DU) framework is proposed as a low-complexity alternative, unrolling a fixed number of Riemannian gradient ascent steps on the sum-rate objective and recovering the discrete phase configuration via quantized phasor projection, with one learnable step size per layer trained in a self-supervised manner. Numerical results under near-field spherical-wave channel models confirm that the DU framework achieves sum-rate performance close to the AO scheme with substantially lower and nearly constant runtime, and that both schemes consistently outperform manifold optimization under discrete hardware constraints.

0.19

GPU-Accelerated Robust MA--RIS Pre-Optimization for Communication and Target Illumination

cs.IT cs.LG ·2026-10-15 ·Tran Le Dung, Ho Viet Duc Luong
published similarity 0.64
Abstract

Movable antennas (MAs) and reconfigurable intelligent surfaces (RISs) offer strong spatial control for integrated sensing and communication (ISAC), but repeatedly adapting MA positions and RIS phases to each channel realization can be impractical. This letter develops a GPU-accelerated robust pre-optimization framework that jointly selects slow-timescale MA geometry and RIS phases and returns a reusable Pareto set balancing expected worst-user rate and transmit-side worst-target illumination. The illumination objective measures directional transmitted power rather than complete echo-detection or parameter-estimation performance. The proposed Regime-Aware Multiobjective Pre-optimization (RAMP) preserves regime-specific Pareto populations, regulates cross-regime mating using Pareto-survival feedback, and constructs a worst-regime robust archive. Numerical results demonstrate competitive robust Pareto quality against the considered evolutionary baselines while avoiding online physical re-optimization.

0.58

Joint Discrete Pinching-Antenna Activation and Beamforming Design for Efficient PASS-ISAC

eess.SP ·2026-10-02 ·Joshua Ogundiya, Animesh Yadav, Octavia Dobre
published similarity 0.64
Abstract · 6 pages, 5 figures, accepted for publication in the proceeding of the IEEE CCNC-2027

Pinching-antenna systems (PASS) offer flexible radiation points for integrated sensing and communication (ISAC), but existing designs largely assume continuous antenna placement, which may be impractical with pre-installed hardware. We investigate a discrete-activation multi-waveguide PASS-ISAC system that selects sparse transmit and receive pinching antennas (TPAs/RPAs) from predefined locations. We formulate a communication-rate maximization problem by jointly optimizing beamforming and TPA/RPA activation under transmit-power, activation, and sensing signal-to-noise ratio (SNR) constraints. To solve this nonconvex problem, we develop a low-complexity joint discrete pinching-antenna activation and beamforming optimization (JDPABO) algorithm based on alternating optimization, successive convex approximation, and reweighted $\ell_1$ minimization. Simulations show that JDPABO approaches continuous-placement performance at low sensing SNR requirements and outperforms fixed activation schemes with sparse PA activation.

0.25

Cramér-Rao Bound Optimization for Joint Beamforming and Mode Selection in RDARS-Assisted ISAC Systems

eess.SP ·2026-10-01 ·Ahmad Reza Hassanshahi, Rouhollah Amiri, Fereidoon Behnia
benchmark similarity 0.62
Abstract

Integrated Sensing and Communication (ISAC) is a foundation of 6G networks, demanding architectures that simultaneously enhance sensing accuracy and communication reliability. This paper presents a Reconfigurable Distributed Antenna and Reflecting Surface (RDARS) aided ISAC framework, where an RDARS overcomes the limitations of conventional passive Reconfigurable Intelligent Surfaces (RIS) and Distributed Antenna Systems (DAS). By enabling each element to dynamically operate in either \textit{reflection} or \textit{connection} mode, RDARS synergistically harnesses reflection gain, distribution gain, and an additional mode-selection gain. We investigate the joint optimization of transmit beamforming at the base station and dynamic mode selection at the RDARS to minimize the sensing performance metric, namely the Cramér-Rao Bound (CRB) for target localization, while guaranteeing a minimum required Signal-to-Interference-plus-Noise Ratio (SINR) for multiple communication users. To solve the resulting non-convex and mixed-integer problem, we develop an efficient iterative algorithm based on the Alternating Optimization (AO) framework, effectively leveraging Majorization-Minimization (MM) and Penalty methods. Comprehensive simulations validate the proposed design, demonstrating that the dynamic RDARS configuration achieves a superior trade-off between the Position Error Bound (PEB) and communication SINR, significantly outperforming benchmark passive RIS and DAS systems.

0.10

Joint Beamforming for Continuous Transmissive RIS-Enabled Multiuser Communications

cs.IT ·2026-10-06 ·Beining Han, Shumeng Zhang, Deyou Zhang, Qingchao Li, Jun Liu +1 more
similarity 0.62
Abstract

This paper studies continuous transmissive reconfigurable intelligent surface (CT-RIS)-enabled multiuser downlink communications, where passive beamforming is characterized by a phase function defined over the continuous aperture. We employ a distance-dependent spherical-wave model for the base station (BS)-to-CT-RIS link and introduce a finite-path model based on field-response vectors for the CT-RIS-to-user links. The resulting weighted sum rate maximization problem jointly optimizes the finite-dimensional BS precoders and the infinite-dimensional CT-RIS phase function, giving rise to a mixed finite- and infinite-dimensional non-convex optimization problem. To address this problem, we develop an alternating optimization algorithm that combines a closed-form BS precoder update with a functional phase update derived using the calculus of variations and minorization-maximization. Numerical results demonstrate that the proposed CT-RIS consistently outperforms the considered benchmarks, with the performance gains attributed to spatially continuous phase control and a larger effective receiving area.

0.24

Large-Scale Partition-Based RIS Beamforming For Uplink RIS-Equipped Multi-User Systems: Asymptotic Analysis

eess.SP eess.SY ·2026-10-08 ·Samira Rahimian, Haris Gacanin
theory similarity 0.61
Abstract

Combining a reconfigurable intelligent surface (RIS) with a receive antenna array is a promising low-complexity architecture for multi-user uplink reception, but its performance analysis for more than two users has remained an open problem: the zero-forcing (ZF) signal-to-interference-plus-noise ratio (SINR) no longer admits an explicit, low-dimensional closed-form expression, and its distribution is analytically intractable for design purposes. This paper addresses this gap for a K-user, K-antenna uplink system in which a large-scale, L-element RIS, partitioned into K user-dedicated sub-surfaces, precedes ZF reception at the base station. Through an asymptotic analysis in which the sub-surface sizes grow without bound, we show that the orthogonal projector underlying the ZF SINR converges to a rank-one matrix aligned with the desired user's channel. We use this convergence to derive a closed-form asymptotic approximation for the average per-user SINR that depends only on deterministic channel parameters. Treating this expression as a tractable design objective, we prove that equal partitioning is approximately sum-rate-optimal at leading order regardless of path-loss asymmetry across users. We also develop a low-complexity greedy pairwise-transfer search that refines the partition beyond this leading-order optimum. Monte Carlo simulations across a range of system and RIS sizes confirm that the closed-form SINR tracks the exact simulated rate closely once the RIS is large relative to the number of users. The greedy search also yields consistent, if modest, sum-rate gains over equal partitioning, validating the theory as both an accurate performance predictor and a practical design tool.

0.34