CS Paper Radar

AuRA: From Atoms to Bits through Autonomous Robot Interaction

Xinchen Yu, Yoonkyo Jung, Haoran Chen, Zikui Cai, Aayush Talreja, Seungjae Lee, Hyunjin Kim, Furong Huang

cs.RO ·submitted 2026-10-25 17:10 UTC · v1
code/data

Abstract

Simulation enables robot-learning experiments at scale, but acquiring physics-informed digital twins often requires human manipulation and manual annotation of recorded interactions. To reduce this reliance on human effort, we present AuRA, a system that automates robot interaction and data preparation for digital-twin reconstruction. AuRA combines execution-aware grasp selection, gripper-motion measurements derived from robot states, and registered pre-interaction geometry and appearance priors. These choices enable autonomous collection, avoid reliance on visual gripper tracking, and recover object information obscured by the robot. Across 13 deformable objects, AuRA reduces active human labor and wall-clock collection time per successfully reconstructed asset by 88.5% and 55.4%, respectively. Relative to the human-collected PhysTwin baseline, AuRA improves seven of nine metrics for future prediction under known gripper motion, including a 28.1% reduction in one-way $L_1$ Chamfer distance. It also achieves similar mean silhouette IoU and Chamfer distance under the evaluated unseen interactions. These results highlight the potential of autonomous robot interaction to support more efficient digital-twin acquisition with comparable reconstruction quality.

Comment
Project page: https://aura-robot.github.io/

Closest papers

Nearest neighbours by meaning across the whole index.

ForceTwin: Physics-informed Digital Twins for Robotic Manipulation from Instrumented Human Interaction

cs.RO cs.AI ·2026-09-18 ·Tim Engelbracht, René Zurbrügg, Mayank Mittal, Marco Hutter, Marc Pollefeys +2 more
code/data similarity 0.77
Abstract

Manipulating objects requires understanding not only their motion, but also the physical properties that determine it. For articulated objects, these include inertia, friction, and mechanisms such as springs or door closers, whose effects can vary with configuration and velocity. Such properties are not directly observable from appearance: visually identical doors may require very different effort to manipulate. Existing digital-twin pipelines recover primarily kinematics or assign static physical parameters from visual and language priors, which can yield physically implausible estimates. As a result, state-dependent mechanism dynamics remain unidentified and are not represented in standard asset formats. We present ForceTwin, a system for identifying physics-informed digital twins of articulated objects from instrumented human interaction. A person probes an object using a handheld force-sensing gripper, providing synchronized poses and interaction forces from which we estimate the articulation, parametric dynamics including inertia, Coulomb friction, viscous damping, and a structured neural residual capturing state-dependent mechanism forces. ForceTwin nearly halves the inertial-parameter error of a VLM prior. As a feedforward dynamics model for impedance control on a Spot and a Franka FR3, ForceTwin achieves 87% goal completion across nine object-embodiment pairs, compared with 60% using VLM-prior and 57% using kinematics-only twins, with the largest gains on objects whose strong mechanisms cause both baselines to stall. We further use the identified twins to train whole-body door-traversal policies and deploy them in the real world. Project Page: https://timengelbracht.github.io/forcetwin-website/

0.58

Operational digital twin clinics enable task-based evaluation of embodied AI

cs.RO cs.AI ·2026-08-12 ·Xinyuan Wu, Jingrao Zhang, Mengdi Xu, Henry K. Chu, Mingguang He +1 more
similarity 0.70
Abstract

Embodied artificial intelligence (AI) must be tested in the clinical environments where it will operate, but building realistic, robot-testable settings is costly and difficult to scale. Here we show that routine clinic images can be transformed into operational digital twins for task-based evaluation of embodied AI. Using 39 ophthalmic clinic scenes, we converted single photographs into editable, simulator-ready environments and assessed reconstruction quality, room-scale geometry, mesh grounding, multi-robot feasibility, perturbation sensitivity and closed-loop policy performance. The reconstructed scenes preserved workspace structure, while local editing enabled controlled device reconfiguration. Device meshes, collision proxies and semantic anchors converted visual reconstructions into contact-aware simulation scenes. Across three robot embodiments, shared task targets showed different patterns of reachability and contact feasibility. Small device translations and rotations produced task-specific changes in contact margins that were not captured by visual similarity alone. Digital-twin trajectories also supported local policy learning and closed-loop evaluation. These findings establish operational validity as a key principle for clinical digital twins and provide an intermediate layer between offline development and physical deployment of embodied AI in healthcare.

0.04

Touch2Robot: Robot Touch in the Human Demonstration Loop

cs.RO cs.AI ·2026-09-21 ·Shengcheng Luo, Xiaoyang Cheng, Hong Ying, Xiaoying Zhou, Jiaming Jiang +4 more
similarity 0.69
Abstract · 12 pages, 13 figures

Human demonstrations offer a scalable way to collect manipulation data, but their contacts may be unstable or infeasible when transferred to a robot hand. Collecting demonstrations directly on the target robot avoids this mismatch but substantially increases the cost of data collection. To address this trade-off, we present Touch2Robot, a framework that lets humans collect demonstrations while seeing how the target robot hand would contact the object. We capture human hand motion, tactile-glove measurements, and object motion during human manipulation. These recordings guide object-specific RL policies to reproduce the demonstrated object motion while favoring contacts consistent with the recorded human touch. We distill the learned behaviors into a unified real-time retargeter that maps incoming human observations and object geometry to robot hand configurations. During collection, the predicted robot configuration is synchronized with the tracked object pose in simulation to reconstruct robot-object contacts, which are visualized to help the demonstrator adapt subsequent interactions to the target hand. Across four real-world tasks, Touch2Robot improves average real-robot replay completion from 37.9% to 72.1% over visual-only feedback, while reducing the collection time per replay-successful demonstration from 58.6s to 18.2s. Reconstructed target-hand contacts achieve 44.2% F1 against real-robot tactile measurements, and policies trained on Touch2Robot demonstrations improve downstream Diffusion Policy performance by 29.1 percentage points over visual-only feedback. These results show that bringing robot touch into the human demonstration loop improves both the quality and efficiency of scalable dexterous data collection. Project webpage: https://Touch2Robot.github.io/.

0.52

Robotizing Human Videos with Physically Consistent Interactions

cs.RO ·2026-10-05 ·Ching-Lam Cheng, Shengfeng He, Bin Zhu
similarity 0.69
Abstract

Human videos offer scalable manipulation data, but the embodiment gap between human hands and robot manipulators limits their direct use. Existing video-editing methods replace hands with rendered robots, yet inaccurate interaction reconstruction and compositing can produce inconsistent grasps and implausible robot-object occlusions. We address these failures from two complementary physical aspects: interaction geometry and scene visibility. First, an interaction-aware contact reconstruction module combines hand-object segmentation with mesh-level contact prediction to recover dense 3D contacts, then converts them into temporally stabilized grasps for parallel-jaw grippers. Second, a depth-aware compositing module uses scene and robot depth to enforce physically consistent robot-object occlusions. The resulting videos preserve the interaction structure of human demonstrations in a robot-compatible form and are co-trained with robot demonstrations. Using identical human videos and robot data, we compare against robot-only training and the original Masquerade pipeline. Across four RoboTwin tasks and two Diffusion Policy visual encoders, our method achieves the highest average success rates, with especially strong gains under out-of-distribution scene variation. Real-world deployment further shows that the proposed co-training approach improves robustness to visual distractors when the task geometry is observable, while performance on depth-sensitive grasps remains limited by the single-camera setup.

0.16

Probabilistic Physics Digital Twin for Human-Robot Interaction

cs.RO ·2026-10-14 ·Yushen Hu, Harshvardhan Chandirasekar, Apurv Kushwaha, Jonathan King, Chen Zhu-Tian
similarity 0.69
Abstract

Digital twins are increasingly used in robotics to simulate interactions, predict action outcomes, and support planning. However, constructing accurate digital twins requires precise estimates of physical properties such as mass, friction, and center of mass, which are often difficult to obtain in real-world environments. We propose probabilistic digital twins, which represent uncertain physical properties as probability distributions rather than fixed values. By simulating actions across these distributions, the twin predicts a range of possible outcomes and their likelihoods. These probabilistic simulations can guide both human and robot actions by identifying actions that are effective despite physical uncertainty. We demonstrate this framework through human-robot interaction scenarios, including interfaces that communicate simulated outcomes to users and robot planning strategies that explicitly account for uncertainty.

0.21

EgoMatrix: Physically Faithful Dexterous Robot Demonstrations from Egocentric Human Videos

cs.RO ·2026-10-13 ·Ziheng Wang, Yanming Shao, Ting Mao, Kaihan Chen, Yiqun Wang +2 more
code/data similarity 0.68
Abstract

Egocentric human videos offer a scalable alternative to robot teleoperation for collecting dexterous manipulation data. However, two challenges limit their use as reliable training data: accurate hand-object interaction (HOI) reconstruction from monocular RGB and high-quality robot demonstrations, especially visual observations. We present EgoMatrix, an end-to-end data engine that converts monocular egocentric human videos into bimanual dexterous trajectories and paired robot observation videos, with the trajectories directly replayable on real robots. It reconstructs HOI with emphasis on relative geometry and contact rather than exact metric scene recovery, then uses retargeting and reinforcement learning (RL) to reproduce the demonstrated tasks in simulation. We jointly render robot hands and objects from these simulated trajectories to produce physically faithful observations synchronized with state and control records. Rendering the same trajectories in diverse, task-compatible backgrounds expands paired training data while preserving robot-object motion and contact. Across TACO, OakInk2, and self-collected data, EgoMatrix achieves 54.84% end-to-end success in simulation versus 14.52% for the strongest baseline. Reconstruction reaches state-of-the-art performance on most metrics of the two public benchmarks. Qualitative results show more faithful hand-object interactions than prior methods, while feature-space analysis shows closer alignment with real-robot observations than GPT-6 Astra. Our project page is available at https://spikew726.github.io/EgoMatrix/.

0.41

SoftVTBench: A Deformation-Aware Visuo-Tactile Dataset and Benchmark for Deformable-Object Manipulation

cs.RO ·2026-08-19 ·Bowen Jing, Mingxin Wang, Ruiyang Hao, Chenchen Ge, Hanwen Shen +13 more
benchmarkdataset similarity 0.68
Abstract

Physical interaction quality is central to deformable-object manipulation, yet most benchmarks evaluate task success alone. A policy may complete the task while allowing slip or causing excessive compression. A primary bottleneck is the absence of visuo-tactile datasets that pair policy-visible contact observations with independent physical ground truth over complete tasks. We introduce SoftVTBench, a visuo-tactile dataset for physical-interaction-aware deformable-object manipulation. It contains 4,000 expert demonstrations and more than 50 assets, including volumetric deformable objects and visually matched rigid twins. At 20 Hz, each episode synchronizes multi-view RGB, dual-finger tactile RGB and marker motion, proprioception, language, and binary and continuous gripper actions, alongside evaluator-only finite-element (FEM) states. Building upon this dataset, we establish a closed-loop benchmark that uses fixed object-specific calibration to define the Deformation-aware Success Rate (DSR), which counts a rollout as successful only when it completes the task and keeps peak normalized deformation within tolerance. Across Diffusion Policy, $π_{0.5}$, and FastWAM, all 12 in-distribution configurations contain successful rollouts that violate the deformation tolerance, accounting for 0.7--24% of each configuration's successes. Under distribution shift, visuo-tactile variants achieve higher task success in all six policy--suite comparisons and higher DSR in five, whereas their in-distribution benefits are mixed. These results show that making touch available does not by itself ensure effective multimodal fusion. SoftVTBench therefore provides a common visuo-tactile resource for studying not only whether a policy succeeds, but how it physically interacts with deformable objects and when touch improves that interaction.

0.41

PRISM: Precision and contact-rich Real-world Industrial Skill dataset with Multimodal sensing

cs.RO ·2026-08-18 ·Tengbo Yu, Jiahao Wu, Hanning Wang, Rui Chen, Chuanhou Liu +2 more
benchmarkdatasetcode/data similarity 0.68
Abstract

Recent progress in robotic learning has been fueled by large-scale datasets collected in everyday environments. However, most existing datasets emphasize short-horizon, low-contact tasks such as pick-and-place, and therefore do not capture the precision control, force/torque or tactile regulation, and multimodal feedback required for industrial assembly. To address this gap, we introduce PRISM, a large-scale multimodal dataset for contact-rich industrial operations. The dataset spans more than 25 manipulation tasks (e.g., electronic components plug/unplug, conveyor-based sorting) and covers diverse mechanical constraints. PRISM includes more than 5,000 trajectories totaling 45 hours of teleoperated demonstrations, recorded using synchronized multi-view RGB-D, force/torque, tactile, and robot-state measurements. In contrast to datasets collected in household or laboratory settings, PRISM provides a realistic benchmark for multimodal perception and control under high-precision industrial constraints, and serves as a foundation for contact-rich, generalizable manipulation in real-world manufacturing environments. The dataset is open-sourced at: https://tengbo-yu.github.io/PRISM/

0.33