CS Paper Radar

Sparse Recovery Bird's-Eye View Model Soup for Robust Camera-Based 3D Object Detection

Jinwoo Chung, Sangho An, Hyunsung Park, Jangho Kim

cs.CV cs.AIcs.LG ·submitted 2026-10-26 07:49 UTC · v1
published

Abstract

Camera-based bird's-eye view (BEV) perception methods such as Fast-BEV have demonstrated promising results with fast inference speed and competitive accuracy. However, their robustness to real-world corruptions remains insufficiently explored, posing risks for autonomous driving deployment where environmental variations are inevitable. In this paper, we propose Sparse Recovery Bird's-Eye View Model Soup (SR-BEVS), a sparse recovery learning approach that simultaneously improves clean accuracy and corruption robustness without requiring additional data or architectural modifications. Our method identifies pruning candidates based on layer-wise weight magnitudes, applies random pruning to create diverse sparse models, and retrains each model with a randomly sampled learning rate. By averaging these diverse recovered models into a single dense model, we achieve enhanced robustness against various corruptions while introducing zero inference overhead. We further provide a mode connectivity analysis demonstrating that our pruning-based diversification preserves the connected low-loss basin necessary for stable weight averaging. Experiments on the nuScenes dataset demonstrate up to 33.8% improvement in corruption robustness and a 1.8% gain in clean accuracy over the Fast-BEV baseline, with consistent improvements across sensor noise, weather distortions, and illumination changes. Our simple yet effective approach may be applicable to other BEV models.

Comment
Accepted to IROS 2026. 8 pages, 6 figures

Closest papers

Nearest neighbours by meaning across the whole index.

ReSS: Residual-Restoring Sparse Attention for 3D Vision Transformers

cs.CV ·2026-09-28 ·Yongsung Kim, Jaehoon Lee, Minjun Park, Wooseok Song, Hun Hwangbo +1 more
code/data similarity 0.67
Abstract

3D vision transformers such as VGGT predict camera poses and scene geometry from multi-view images in a single forward pass, but their global attention over all concatenated view tokens dominates computation as the number of views grows. To reduce this cost, SparseVGGT and HeSS sparsify attention at the block level, and both retain blocks with high attention probability. However, we observe that attention probability poorly predicts how much the model's behavior actually changes when a block is removed, and we show that this mismatch is why performance collapses as sparsity increases. In this paper, we propose ReSS (ReSidual-ReStoring Sparse Attention), which recasts block selection from a problem of maximizing the retained attention mass to one of minimizing the drift that sparsification leaves in the residual stream. We introduce a drift score that quantifies how much each block shifts the residual, and, since the drift of a drop set depends on the directions of the contribution vectors rather than on their magnitudes alone, an iterative residual restoration procedure that refines the drop set as a whole. Across three backbones and five datasets, ReSS preserves dense performance better than prior methods at matched sparsity. Two further results support drift as the quantity that governs the cost of sparsification: maximizing drift degrades performance faster than random selection, and plotted against realized drift instead of sparsity, all methods fall approximately onto a single curve. Code is available at https://github.com/libary753/ReSS.

0.35

Bi-Level Routing and Sparse Spatial Attention based Multi-View BEV 3D Object Detection for Autonomous Driving

cs.CV cs.AI ·2026-09-12 ·Jing Zhang, Jiaqi Liu, Zibo Wang
published similarity 0.66
Abstract · Accepted to 2026 9th International Conference on Computer Information Science and Application Technology (CISAT). 4 pages, 1 figure

Bird's Eye View (BEV)-based multi-view 3D object detection suffers from challenges of computational complexity, multi-scale feature extraction, and efficiency of dense 2D-to-BEV view transformation. To address these problems, this paper proposes an improved BEV 3D object detection algorithm Sparse-BEVNet. Firstly, a Bi-Level Routing Attention (BRA) mechanism is introduced into the image feature extraction network to reduce the computational burden of the backbone. Second, Cascaded Group Attention (CGA) is employed in the feature fusion module, which enhances deep interaction across features of different hierarchical levels without introducing additional computational overhead. Furthermore, a Sparse Spatial Cross-Attention mechanism is adopted to replace the conventional dense view projection pipeline. Experimental results on the public nuScenes dataset demonstrate that the proposed method achieves a mean Average Precision (mAP) of 45.2% and a nuScenes Detection Score (NDS) of 54.5%, corresponding to 3.6% and 2.8% improvements relative to the baseline model, respectively.

0.69

ReinSeg: Retrieval-Guided Bounded Multimodal Refinement for 3-D Road Anomaly Segmentation

cs.CV ·2026-11-02 ·Haifa Zhang, Yijing Wang, Zhiqiang Zuo
benchmark similarity 0.66
Abstract

3-D road anomaly segmentation is essential for risk-aware perception in autonomous driving. Its central challenge is to rank sparsely observed hazards ahead of abundant normal road structures while preserving point-wise metric localization. LiDAR provides accurate 3-D point support, whereas surround-view imagery offers complementary semantic context for separating unexpected hazards from challenging normal structures. We propose ReinSeg, a retrieval-guided bounded multimodal refinement framework for point-wise road anomaly segmentation. Occupied LiDAR bird's-eye-view cells retrieve scene-specific context from a shared memory of eight surround-view images without supplying calibration variables to the retrieval module. A relative-norm-bounded residual returns this context to the LiDAR point features, so the frozen LIDO anomaly-scoring interface is preserved, and the refinement is optimized with in-distribution semantic labels only. On the Spotting the Unexpected (STU) benchmark, ReinSeg improves validation average precision from 27.54\% to 35.67\% and reduces the false-positive rate at 95\% anomaly recall from 34.85\% to 10.61\%, shrinking the high-recall screening set from 67.54 to 20.55 million points. Relative to REL, AP is 24.99 percentage points higher and FPR95 is 0.99 points lower. Matched interfaces and component isolation show that retrieved scene imagery and the relative-norm bound are both essential, and ReinSeg stays above LiDAR-only performance under missing, corrupted, or misaligned camera inputs while running at 21.8 frames per second. These results establish bounded retrieval of scene-specific visual evidence as an effective route to reliable 3-D road-hazard perception.

0.19

Robust Global Structure-from-Motion via View Graph Pruning

cs.CV ·2026-08-22 ·Jiamin Xu, Lixing Yao, Weichen Dai, Renshu Gu, Zunjie Zhu +2 more
similarity 0.66
Abstract

Structure-from-Motion (SfM) aims to estimate camera poses and reconstruct 3D structures from a collection of unordered images. Compared with incremental SfM, global SfM achieves better scalability by jointly estimating camera poses based on a view graph constructed from pairwise correspondences. However, its performance is highly sensitive to erroneous edges caused by visually ambiguous matches, which may lead to incorrect camera registration and reconstruction artifacts. In this work, we propose a subgraph-guided view graph pruning framework for robust global SfM. Our key idea is to exploit the internal consistency of reliable subgraphs to identify and remove unreliable connections. Specifically, we first partition the view graph into locally consistent subgraphs and perform global SfM within each subgraph to obtain reliable camera poses. We then apply RANSAC-based edge pruning across subgraphs to remove inconsistent edges, and finally perform global SfM on the refined view graph. Extensive experiments on ambiguous, sequential, and unordered image datasets demonstrate that our method improves the robustness of global SfM under challenging conditions. Further evaluation with neural rendering shows that the improved camera estimation leads to higher-quality novel view synthesis results.

0.25

PhGS: Post-Hoc Pruning and Refinement of Single-View Feed-Forward 3D Gaussian Reconstructions

cs.CV ·2026-09-17 ·Rinto Yagawa, Han Cheng, Dieter Schmalstieg, Hideo Saito, Shohei Mori
similarity 0.65
Abstract

Recent single-view feed-forward 3D Gaussian Splatting (3DGS) generation predicts a fixed number of Gaussians per camera ray, introducing severe spatial redundancy. Most existing compaction strategies target multi-view setups to exploit cross-view consistency and are incompatible with single-image models. Instead of retraining the base feed-forward network to directly output compact representations, our insight is to keep the base models frozen and apply post-hoc pruning and recurrent refinement to the generated Gaussians. Consequently, we propose a backbone-agnostic compaction pipeline for single-view feed-forward 3DGS that couples an importance-score-based pruning mechanism with a trainable, lightweight recurrent refinement module, which iteratively updates the surviving primitives to restore image quality. Our results demonstrate seamless integration with existing baselines while preserving novel-view rendering fidelity and achieving high memory reduction. Furthermore, our method supports flexible inference-time keep ratios for application needs.

0.15

Carve VFM: Carving Specialists out of Generalists, Automatic Task-Specific Compression of Vision Foundation Models

cs.CV cs.LG ·2026-10-12 ·Lotfi Abdelkrim Mecharbat, Abdelrahman Elsayed, Ibrahim Almakky, Martin Takáč, Mohammad Yaqub
similarity 0.65
Abstract · 24 pages, 6 figures, 11 tables

Vision foundation models (VFMs) provide transferable visual representations, but their inference cost limits deployment in many settings. Fine-tuning specializes a VFM without shrinking it; distillation shrinks it, but through expensive teacher-guided training. Structured pruning offers a more direct route by extracting a compact subnetwork from the VFM. However, as compression gets aggressive, existing methods fail because they treat subnetwork selection and recovery as separate axes. Across layers, capacity must follow task sensitivity rather than spread uniformly. Within a layer, a removal cannot be judged by importance alone; its impact also depends on how well the lost contribution can be recovered from what remains. Selection and recovery must therefore be decided jointly. We introduce Carve VFM, which resolves this interdependence. Given a VFM, a calibration set, and a parameter budget, it (i) searches for task-specific capacity allocations across layers; (ii) guides the search via an adaptive recovery-aware fitness criterion; and (iii) reconstructs removed behavior through iterative closed-form low-rank corrections merged into the surviving weights. The result is a dense encoder produced in minutes on a single GPU without backbone retraining. Across twelve benchmarks and four models from DINOv3 and MetaCLIP-2, Carve VFM achieves the highest reported mean accuracy in seven of eight backbone-budget configurations among the evaluated dense structured-pruning methods. Further fine-tuning surpasses the strongest evaluated edge model (88.1% vs. 85.8%), and carved models cut compute and memory while delivering 1.3-2.0x higher GPU throughput than the uncompressed one. These results show that the compact model you need is inside the VFM; it only has to be carved out.

0.22

OmniPoint: Universal Monocular Metric Pointcloud from Any Camera

cs.CV ·2026-09-08 ·Botao Ye, Marc Pollefeys, Ming-Hsuan Yang, Abhijit Kundu
top venuecode/data similarity 0.64
Abstract · ECCV 20026. Project Page: https://botaoye.github.io/omnipoint/

Recovering metric 3D geometry from monocular images is a fundamental computer vision task, yet current methods remain heavily fragmented by fixed camera model assumptions and inflexible input schemes. We present OmniPoint, a unified framework designed to generalize metric reconstruction across diverse imaging sensors, including pinhole, fisheye, and equirectangular projections, while accommodating varying geometric priors. To overcome projection rigidity, OmniPoint abandons conventional planar depth regression. It instead adopts a decoupled ray and distance representation alongside a decoupled training objective, explicitly separating the camera projection model from the scene structure. To address the severe scarcity of training data for alternative cameras, we introduce a bidirectional augmentation strategy that explicitly bridges labeled perspective data and unlabeled omnidirectional domains in 3D space. Furthermore, to seamlessly integrate optional inputs like camera intrinsics or sparse depth without destabilizing the network through feature distribution shifts, we propose a robust information injection mechanism. This mechanism utilizes learnable input state embeddings to resolve architectural ambiguity and applies vectorized Gaussian smoothing to densify irregular measurements. Extensive experiments demonstrate that OmniPoint achieves state-of-the-art zero-shot performance across multiple benchmarks, establishing a robust new standard for unified monocular 3D reconstruction.

0.65

MonoMIP: Multi-Height Inverse Perspective Mapping for Monocular 3D Object Detection

cs.CV ·2026-10-13 ·Emir Ulurak, Furkan Kıraç
published similarity 0.64
Abstract · Accepted to ACCV 2026. 18 pages main paper and 14 pages supplementary material

Monocular 3D object detection methods increasingly rely on depth-guided transformers, but they operate entirely in the perspective image plane where spatial relationships are distorted by foreshortening. We propose MonoMIP, a dual-decoder framework that adds complementary 3D geometric reasoning through Bird's-Eye View (BEV) features constructed via Multi-Height Inverse Perspective Mapping. We perform IPM at K elevation planes spanning ground to rooftop, producing an ordered stack of height-conditioned metric BEV features that reduces above-ground misprojection and exposes depth-dependent appearance variation across planes. A BEV decoder with multi-scale deformable attention aggregates this multi-height evidence per query, while a depth-guided 3D decoder provides complementary perspective-space predictions. Without extra training data, MonoMIP attains 25.84% Moderate AP3D|R40 on KITTI val and 21.66% on the official test set for Car, outperforming recent published monocular methods on both the KITTI and Waymo benchmarks.

0.28