CS Paper Radar

Zero-HLM: Generalizable Humanoid Loco-Manipulation without Real Robot Data

Dianyi Yang, Mengya Liu, Zhumei Wang, Yu Liu, Xiaochen Zhang, Yixuan Li, Le Ma, Yuhang Yang, Weiqi Huang, Wei Liang, Baoxiong Jia, Siyuan Huang

cs.RO ·submitted 2026-10-26 09:20 UTC · v1
code/data

Abstract

Learning generalizable humanoid loco-manipulation remains bottlenecked by costly real-world demonstrations. Simulation provides a scalable alternative, but requires visually faithful, physics-ready scenes and executable whole-body motions. We present Zero-HLM, a real-to-sim-to-real framework that transforms smartphone captures and simulated source demonstrations into scalable training data for humanoid loco-manipulation. Gaussian-guided agentic real-to-sim reconstruction aligns visual and physical scenes; motion-environment co-adaptation uses rollout feedback to correct whole-body references and interaction geometry. We generate 4,800 physically validated demonstrations for zero-shot transfer across three Unitree G1 tasks. Simulation-trained GR00T N1.7 achieves 66.7% mean full-task success, versus 46.7% with real-data training. On generalized configurations, expanded simulation training raises pooled success from 23% for base-trained real-data policies to 69%, without additional real demonstrations. Project page: https://young-bit.github.io/zero-hlm/

Closest papers

Nearest neighbours by meaning across the whole index.

FetchMan: Learning Visual Humanoid Loco-Manipulation Policies from Simulated Experiences

cs.RO ·2026-08-17 ·Omar Rayyan, Zhi Li, Max Argus, Yuxin Jiang, Chang Yu +2 more
benchmarkhighly cited similarity 0.80
Abstract · Project website: https://orayyan.com/fetchman

Visual loco-manipulation policies that can generalize to novel scenes and objects have long been a goal of robotics research. However, today's data-hungry algorithms make collecting sufficient demonstrations a struggle for tabletop manipulation, and even more so for humanoids that must also walk and balance. Learning from simulated data and transferring that behavior to the real world, as is commonly done in locomotion, sidesteps this struggle, so we replicate that recipe for loco-manipulation. In doing so, we find that cloning synthetic demonstrations results in a low performance ceiling no matter the amount of training data. Reinforcement learning breaks through it, and refining the cloned policy with Flow-GRPO on a single sparse reward yields performance that synthetic behavior cloning cannot match. Together, these stages form our end-to-end sim-to-real pipeline spanning more than 150,000 scenes, which we use to train FetchMan. We evaluate it on FetchMan-Bench, a simulation benchmark we release, and deploy it zero-shot on a real Unitree G1, where our single-object reach-and-pick policy walks to and grasps a target across unseen scenes at 73.3% success. Finally, we extend this recipe to multi-object training, a first step toward loco-manipulation generalist policies at this data scale.

0.51

$λ_0$: Scaling Open-World Egocentric Human Data for Humanoid Loco-Manipulation

cs.RO cs.CV ·2026-10-13 ·Lambda-humanoid Team, :, Chongyang Xu, Jin Chen, Jinhui Ye +12 more
dataset similarity 0.77
Abstract · Tech report, 24 pages

Humanoid loco-manipulation requires coordinated whole-body interaction with the physical world, yet collecting robot demonstrations at scale remains costly. Human demonstrations offer a scalable alternative, but existing egocentric human supervision often omits locomotion and posture, while embodiment differences and controller dynamics hinder accurate end-effector execution. We introduce HumanVerse, a 500-hour dataset of open-world human loco-manipulation pairing egocentric video with synchronized body and hand motion. Our human-to-humanoid pipeline aligns camera viewpoints and arm appearance, and refines motion references and controller inputs offline to reduce end-effector errors while preserving whole-body coordination. We validate the pipeline through zero-shot transfer to Unitree G1 on representative whole-body manipulation and long-range loco-manipulation tasks, without target-task robot demonstrations. Building on this pipeline, we develop $λ_0$, a humanoid foundation model for whole-body loco-manipulation, with robot-aligned human demonstrations providing supervision for mid-training. Increasing whole-body human data consistently improves downstream task progress. $λ_0$ achieves 90.0% success on SIMPLE and 62.5% across real-world loco-manipulation tasks. We expect this study to guide scalable whole-body human data collection toward humanoid foundation models for richer interaction with the physical world. Homepage: https://lambdahumanoid.github.io/

0.53

Beyond Retargeting: Low-Latency and Robust Humanoid Whole-Body Teleoperation with Learned Atomic Motion Primitives

cs.RO ·2026-10-06 ·Xiayan Xu, Jiyu Yu, Xingzhou Chen, Siyi Qian, Zongyu Ma +3 more
code/data similarity 0.77
Abstract · This paper is withdrawn pending acquisition of the required data-use license and completion of the company’s internal open-source complian…

Humanoid whole-body teleoperation translates human motion into stable robot behavior in real time. Existing systems typically rely on online motion retargeting to bridge human--robot morphological differences, but this process adds latency and can produce physically infeasible targets. Meanwhile, diverse, noisy, and partial human-motion observations often fall outside the training distribution, potentially causing unstable robot behavior. We propose a retargeting-free policy that maps raw human motion directly to robot joint commands in a single forward pass, eliminating online kinematic adaptation. To improve robustness, we learn a codebook of full-body motion primitives that projects out-of-distribution observations onto plausible motion prototypes and recovers full-body motion from partial inputs. Experiments on a Unitree~G1 in simulation and on hardware, using virtual reality, optical mocap, text-to-motion generation, and monocular video inputs, show that our method outperforms baselines in latency and robustness.

0.30

HandsOn: A Large-Scale Simulation Benchmark for Generalizable Dexterous Manipulation

cs.RO ·2026-10-19 ·Tianwei Luo, Yiming He, Hongjin Wu, Ting Pan, Debin Ren +12 more
benchmark similarity 0.76
Abstract · 56 pages, including appendices

General-purpose manipulation requires reliable behavior across embodiments, objects, and task demands. We introduce HandsOn, a composable simulation platform and benchmark for cross-embodiment dexterous manipulation. It supports five robotic arms, six dexterous hands, and approximately 200 rigid, articulated, and deformable assets in randomized scenes. The benchmark pairs 18,000 curated human demonstrations with 66 human-verified tasks: Core-50 supports demonstration-based learning and execution tests, while Transfer-16 evaluates asset and relation transfer, skill composition, and deformable manipulation without target-task training demonstrations. Qualitative real-robot rollouts illustrate sim-to-real transfer. Across diffusion, vision-language-action, world-action, and prompted VLM-based methods, the best trained multi-task policy achieves 29.1% Core-50 success. Without benchmark finetuning, GPT-6 using move_eef for palm-and-finger control achieves 5.2% on Core-50 and 1.9% on Transfer-16 over 660 trials. Trained-policy stage diagnostics expose failures in contact establishment, action coordination, and maintaining achieved goals, with additional sequencing errors in composed tasks. HandsOn provides a shared basis for investigating manipulation generalization and the limits of reliable physical interaction.

0.51

Demonstration Synthesis from a Single Scan via Gaussian Splatting for Visuomotor Policy Learning

cs.RO ·2026-09-17 ·Beichen Wang, Yuen-Hei Yeung, V. R. Sridhar Devarakonda, Xuesu Xiao
similarity 0.75
Abstract

Training a visuomotor policy calls for abundant demonstrations that closely match the target environment, yet collecting them anew remains expensive. Existing demonstration synthesis methods reduce this cost but remain constrained by high manual effort, limited visual fidelity, or heavy reliance on physics simulators. This paper introduces GaussianFactory, a high-fidelity data engine that mass-produces demonstrations with a single video scan as its only human input and no physics engine in the generation loop. Specifically, GaussianFactory reconstructs the scene as an editable 3D Gaussian Splatting (3DGS) replica and samples from the object-combination tasks the scene affords. For each task, it plans grasps and trajectories purely kinematically on the geometric reconstruction, rendering photorealistic demonstrations that visually match the target environment. Physical dynamics enter the pipeline only where contact force interactions dictate the outcome---during grasp formation, via a learned contact model pretrained once on an interaction dataset. To evaluate the downstream utility of the synthesized demonstrations, we implement an end-to-end scan-to-deployment workflow in two setups: a simulated scene that stands in for the real world to enable reproducibility, and a real-world workspace with a physical UR10e robot. In each setup, a standard diffusion policy trained solely on the synthesized demonstrations achieves 95.1% and 84.2% success rates, respectively.

0.40

Whole-Body UMI: Transferring UMI Manipulation Skills to Humanoid Whole-Body Manipulation via Real-Time Motion Generation

cs.RO ·2026-09-19 ·Yuxuan Nai, Leixin Chang, Liangjing Yang, Shuo Yang, Zhongyu Li
similarity 0.75
Abstract · 8 pages, 5 figures

Collecting whole-body demonstrations for humanoid manipulation mostly relies on teleoperation, which is costly and hard to scale up. The Universal Manipulation Interface (UMI) provides a scalable data collection paradigm, but end-effector trajectories alone underdetermine humanoid whole-body coordination, which is insufficient for whole-body demonstration collection. Therefore, we introduce Whole-Body UMI (WB-UMI), a task-agnostic, real-time and end-effector conditioned motion generator that decouples whole-body coordination learning from task semantics learning through a shared end-effector interface. A diffusion policy learns from native UMI demonstrations, while WB-UMI learns independently from retargeted motion capture, requiring no body trackers or paired image--whole-body demonstrations during task-specific data collection. In real deployment, an asynchronous hierarchy integrates the diffusion policy, motion generator, and a whole-body controller with latency compensation and measured-state feedback. Real-robot experiments on G1 support real-time closed-loop transfer across four tasks, achieving 90% success in drawer closing, 80% in shelf pick-and-place, 30% in ball toss, and 40% in Loco-PnP, which shows the effectiveness of this hierarchy in transferring native UMI skills to humanoid whole-body manipulation.

0.45

Whole-Body Dexterity

cs.RO cs.AIcs.LGeess.SY ·2026-10-15 ·Conor Mc Gartoll, An Dang, Pranay Thangeda, Arjun Gupta, Carolina Higuera +3 more
similarity 0.75
Abstract · 20 pages, 13 figures

Current humanoid dexterous manipulation remains largely confined to end-effectors and simple grasps, falling short of humans' ability to engage the entire body by bracing and sliding bulky objects against the arms and torso. We introduce Whole-Body Dexterity (WBD), a general framework that uses the robot's body and appendages as contact surfaces to grasp and manipulate objects. Our sim-to-real pipeline first generates a dataset of feasible whole-body grasps, then trains reinforcement-learning experts on a general any-to-any repositioning objective by sampling initial and goal grasps from the dataset, and distills these experts into a single policy that uses proprioception and object geometry. We show that the distilled policy transfers zero-shot to a real Unitree G1, where it repositions a basketball and a cardboard box to regions around the torso and completes a long-horizon task that stows a box under one arm, carries it from a shelf to a table, and places it. The controller operates interactively, steered by coarse motion references from a human teleoperator. Across real-world whole-body manipulation tasks, the distilled controller completes 90% of trials, compared with 18% for direct retargeting and 4% for a generalist whole-body controller.

0.39

MOTIO: Agentic Skill Engineering for Reality-Grounded Humanoid Loco-Manipulation

cs.RO ·2026-10-24 ·SpatialtemporalAI
code/data similarity 0.75
Abstract · 24 pages, including 11 pages of supplementary material

We present MOTIO, an agentic skill-engineering system that turns ordinary human-action videos, reality-grounded 3D assets, motion references, and reusable robot skills into executable humanoid loco-manipulation programs. Through in-context task and contact reasoning, an agent constructs staged robot-native interactions and improves them using physics execution, multi-frame feedback, and human validation---without task-specific teleoperation or robot demonstration collection. Agentic 3D supplies metric product and environment assets, while existing whole-body, inverse-kinematics, and dexterous-hand interfaces realize the programs. Across 33 timestamped first approvals, the median recorded agent-turn time is 97.0 minutes and request-to-approval duration is 2.80 hours. Simulation-side layout and object variation prepare a long-horizon bottle-disposal skill for a continuous 101.75-second physical G1 execution in a scanned office; physical refinement reduces screw-tightening thread residual by 76.0%. Agent-generated skills additionally supervise BC/DAgger distillation into one shared reference policy, completing 18 simulated tasks under the same checkpoint without inference-time expert intervention. Project page: https://iiiiqiiii.github.io/motio/

0.30