CS Paper Radar

AutoEnergyDesign: An LLM-Driven Agent for Automatic Energy System Design Optimization

Amedeo Buonanno, Salvatore Fabozzi, Maria Valenti

cs.AI stat.ML ·submitted 2026-10-26 10:25 UTC · v2

Abstract

The design optimization of building energy systems represents a complex, high-dimensional search problem involving discrete technology selections, continuous sizing parameters, and intricate economic trade-offs in which every candidate must be evaluated by a year-long simulation. This paper presents AutoEnergyDesign, in which a Large Language Model (LLM) agent reasons over past simulation results, proposes configuration changes and learns in context from each outcome, while a git-based mechanism reverts changes that do not improve the design. The agent couples a reasoning model with explicit memories, a constrained action interface, and an environment-grounded keep/revert feedback signal. The simulator covers eight technologies and computes the 25-year Net Present Cost (NPC). On a case study with measured building loads, the agent, instantiated with three Claude models (Haiku 5.5, Sonnet 5.5 and Opus 5.5; ten runs of 50 simulations each), is compared with random search, Tree-structured Parzen Estimator (TPE) Bayesian optimization and a (1+1) evolution strategy that shares the agent's acceptance rule (ten seeds of 300 evaluations). With all three models the agent reaches an NPC of 3.53MEUR, 1.20% and 0.23% below the best results of TPE and of the evolution strategy, and comes within 1% of it after a median of 18 to 27.5 simulations; among the baselines, only the evolution strategy does so, after a median of 192 evaluations. Every decision is recorded, making the search auditable.

Closest papers

Nearest neighbours by meaning across the whole index.

RestoreBench: Can AI Agents Restore Power Flow Convergence?

cs.AI eess.SY ·2026-08-31 ·Riccardo Mansutti, Andrea Pomarico, Robert Jakob, Qian Zhang, Alberto Berizzi +1 more
benchmarkcode/data similarity 0.63
Abstract

Large Language Model (LLM) agents increasingly automate multi-step engineering workflows through tool use, interpretation of intermediate results, and iterative planning. Diagnosing and resolving non-convergent power flow cases is a promising yet largely unexplored application, as it requires engineering judgment, experimentation, and decision-making within constrained action spaces. We introduce a benchmark that evaluates these capabilities across multiple LLMs and three architectures: \emph{chatbot}, \emph{single agent}, and \emph{multi-agent} systems. The evaluation covers two power grids and 46 cases per grid, each requiring one or more corrective actions to restore convergence. The benchmark defines the simulation environment, observation and action spaces, and evaluation metrics, providing a reproducible foundation for developing agentic AI systems for power system planning and operation. The code is available at https://github.com/Mansutti081/RestoreBench

0.41

The Smart Buildings Challenge: Learning Foundation Models for Real-World Optimization at Scale

cs.AI ·2026-10-13 ·Judah Goldfeder, Ayush Rai, Philippe M. Wyder, Na Li, Victoria Dean +9 more
similarity 0.62
Abstract · This is for a Neurips 2026 competition

Buildings cause nearly 40\% of carbon emissions in the US. Of total building emissions, HVAC systems are responsible for approximately 40-60\% and account for 15\% of global energy consumption. Despite advances in artificial intelligence, most buildings still operate as inefficiently as they did decades ago. Building optimization, perhaps more so than any other optimization problem, has enormous potential for Machine Learning (ML) driven impact on climate change, in both the short and long term. One of the biggest obstacles for building optimization is the lack of policy transfer. Most building control systems, whether simulation or learning based, don't generalize: they only work well for the building they were developed for, but not for other buildings. To solve this problem, we propose a challenge for the development of building foundation models that easily adapt to new buildings with minimal configuration and thereby enable building optimization to scale across the globe. Participants will build control policies on a set of simulated buildings, and have their policies evaluated on an unseen set of buildings. The buildings vary in size, layout, weather, material properties, and HVAC system. Successful outcomes from this initiative promise a massive leap forward in global sustainability efforts and demonstrate the great potential of ML to combat climate change.

0.33

Integrating Agentic Artificial Intelligence with High-Performance Computing for Grid Planning

eess.SY ·2026-09-03 ·Samim Konjicija, Slaven Peles
published similarity 0.62
Abstract · 6 pages, 3 figures, 3 tables. To appear in proceedings of EnergyCon 2026

We present AgentiGrid, an agentic artificial intelligence (AI) framework that integrates large language models (LLMs) intelligence and high-performance computing (HPC) to streamline and accelerate the multi-scenario power flow studies. AgentiGrid is an autonomous decision-making agent that proposes parameter modifications, invokes analyses through HPC analysis toolkit ExaGO, interprets results, and determines subsequent actions. ExaGO provides multiple power flow applications that can perform deterministic, stochastic and security constrained optimal power flow analyses. AgentiGrid provides backends to multiple LLMs (OpenAI, Anthropic, Ollama, and Ollama cloud) augmented with context specific and task specific prompts. Key features include interactive mid-search steering, goal-type-aware post-search analysis, and concurrent variant exploration for power flow optimization. A Streamlit-based graphical launcher provides real-time visualization of iteration progress and generates reports in natural language. AgentiGrid is capable of autonomously converging transmission constrained alternating current optimal power flow in under 20 iterations, with near-perfect reliability

0.25

TuneBench: Benchmarking AI Agents for Power System Dynamic Model Calibration

eess.SY ·2026-11-03 ·Andrea Pomarico, Salvatore Tessitore, Giorgio Giannuzzi, Alberto Berizzi
benchmarkcode/data similarity 0.62
Abstract

Large Language Model (LLM)-based agents can automate complex engineering workflows by interacting with tools, interpreting feedback, and making iterative decisions. This paper introduces TuneBench, a benchmark for evaluating Agentic AI in power system dynamic model calibration, where controller parameters are adjusted to reproduce target dynamic responses. The benchmark reflects a common Transmission System Operator (TSO) practice, in which equivalent models used for Dynamic Security Assessment (DSA) are calibrated against measurements from grid-code compliance tests when proprietary models are unavailable. Two cases of increasing complexity are considered: the governor and Automatic Voltage Regulator (AVR) of a synchronous generator and the control system of a Battery Energy Storage System (BESS), both tuned against active-power and voltage step tests within a budget of 15 simulations. LLM-based agents are compared with random search and Genetic Algorithm (GA) baselines over 10 independent runs. Only the most advanced models, Opus 5.5 and GPT-6, accurately reproduce all target trajectories, with median R2 above 0.995 in every test and tracking errors up to two orders of magnitude lower than the baselines. The agent logs show that these agents autonomously extract dynamic performance indices, such as settling time and damping, and relate them to specific control parameters, decomposing the tuning problem into physically interpretable sub-problems. The benchmark is publicly available at https://github.com/Power-Agent/PowerAgentBench/tree/main/benchmarks/dynamic/level3.

0.42

B2G-Agent: An LLM-Based Multi-Agent Tool for End-to-End Building-Grid Interactions

cs.HC ·2026-11-14 ·Xueyuan Cui, Qian Zhang, Xiaochen Liu, Yi Wang
code/data similarity 0.62
Abstract

Buildings are major electricity consumers and can interact with distribution network dispatch through flexible power scheduling. These interactions require distribution network operators (DNOs) and building energy managers (BEMs) to reconcile their operational constraints and perform complex cross-field computations. The lack of cross-domain expertise and unified computational workflows could lead to inefficient or physically infeasible interactions. To address this bottleneck, we develop an end-to-end large language model (LLM)-based multi-agent tool, B2G-Agent, that bridges DNOs and BEMs. The tool deploys three collaborative agents: a Translator for bidirectional cross-domain semantic mapping via hybrid retrieval-augmented generation (RAG); an Actor for automated configuration and execution of joint simulation and optimization through directed acyclic graphs; and a Reviewer for memory-augmented reflective failure diagnosis. This workflow abstracts away cross-field modeling complexities and enables both sides to focus on high-level operational decisions. Comprehensive evaluations across 200 synthesized tasks show that B2G-Agent improves the interaction quality score from 66.71 to 85.57 and increases the task success rate from 38.0% to 69.0% over the baseline while satisfying operational constraints. The open-source tool and interface are available at https://github.com/hkuedl/B2G-Agent.

0.41

LLM-Assisted Optimization for Simulation-Based Redesign

cs.AI cs.CEmath.OC ·2026-10-29 ·Chan-Eui Song, Jeremy J. Michalek, Christopher McComb
code/data similarity 0.61
Abstract · 17 pages, 12 figures, 11 tables. Submitted to the ASME Journal of Mechanical Design. Code: https://github.com/Chani-song/WAFER, data: https:…

Engineering design frequently involves redesigning a prior solution to adapt to changes in context, such as material prices or system requirements. Redesign often leverages simulators too complex and/or computationally intensive for traditional numerical solvers, which lack engineering knowledge and context, to ensure global solution quality. Large language models (LLMs) can interpret semantic information, including engineering knowledge about the system and changes in context, to help guide search, and recent studies have shown that incorporating this knowledge into optimization can improve search performance. However, how best to combine LLMs with numerical solvers in redesign remains unclear. We develop and test an integrated LLM-optimization approach for redesign and compare three methods for leveraging LLMs (warm start, variable fixing and ReAct) and four black-box solvers (Bayesian optimization, genetic algorithms, mesh adaptive direct search and random search) on an electric vehicle battery pack cost minimization case study across four types of redesign scenarios. We find that the integrated approach can match feasible design discovery of the numerical-solver baselines with 80% fewer simulator evaluations while tripling the fraction of runs that find near-optimal solutions. We find that the best LLM-solver integration approach and the way the prior solution is leveraged depend on the structure of the design requirement change, and that the benefit of increasing LLM model size grows with the extent to which the LLM controls the search. These results show clear potential for LLMs in redesign tasks for guiding or replacing numerical solvers.

0.44

AI Control Scientist: LLM-driven Agentic System for Automated Control Design

cs.AI ·2026-08-27 ·Haiteng Wang, Weihao Li, Jing Zhang, Lei Ren
similarity 0.61
Abstract

Control system design is critical for modern industry, such as chemical process temperature regulation and aero-engine control. However,traditional control design workflows rely heavily on expert knowledge and extensive manual parameter tuning, resulting in limited efficiency and scalability. To this end, this paper proposes AI Control Scientist (AICS), the first large language model (LLM)-driven agent capable of automatically generating optimized controller from language design requirements. Specifically, a Task Modeling Agent interprets user requirements to engineering constraints; a Controller Design Agent generate candidate controller structures and executable code; and a Parameter Tuning Agent refine controller parameters under closed-loop performance criteria. Experiments demonstrate that the proposed agentic system can automatically generate multiple representative control systems, outperforms existing automated baselines in both design success rate and optimization efficiency. This work has the potential to transform control system design from human-driven to agent-driven, paving the way for model predictive control and other advanced control systems design.

0.17

Agent Gym: A Framework for Continuous Evaluation and Evolution of LLM Agents Through Human-in-the-Loop Feedback

cs.AI ·2026-08-16 ·Pouya Ghiasnezhad Omran, Michael Zimmermann, Duncan Cambridge, Ashmita Kapoor, Tanya Dixit
code/data similarity 0.60
Abstract · 15 pages, 4 figures

Large Language Model (LLM) agents deployed in production environments face a fundamental tension: the agent's behavior is frozen at deployment time, while the business rules and edge cases it must handle continue to evolve. Existing approaches address agent construction and one-time evaluation but provide no structured mechanism for continuous post-deployment behavioral correction without modifying the agent's source code. Most of the approaches offered in the market, require intense collection of logs and traces, and re-examining the agent design by the engineering team, a process which is heavy, long and negates the economical value of agentic transformation. We introduce Agent Gym, a modular, domain-agnostic framework that wraps any existing LLM-based agent in a continuous evaluation-and-evolution loop. The framework provides six composable capabilities --- Act, Evaluate, Investigate, Correct, Learn, and Observe --- organized across three architectural zones: a constitution layer that codifies domain knowledge in configuration artifacts, a runtime inference pipeline that chains acting, investigation, and adaptive correction, and a learning loop that enables subject matter experts to discover and validate new correction rules through natural language interaction. The key technical contributions include a hybrid deterministic-LLM correction engine with 21 condition operators and three-tier actions, a three-layer investigation architecture for ground-truth-free compliance validation, and a programmatic safety loop that guarantees rule correctness before human approval. We further introduce the Spec-to-Note Gap, an autoencoder-inspired view of agentic system transparency. An open-source reference implementation for invoice processing demonstrates that the framework is fully operational and ready for adoption.

0.26