CS Paper Radar

ObjectTwin: Measuring the Asset Correspondence Gap for Capture-Anchored Digital Twins

Zhenghe Guo

cs.CV ·submitted 2026-09-30 02:01 UTC · v1

Abstract

Object-wise reconstruction increasingly inserts generated meshes into captured scenes as editable proxies for observed objects. This use creates a requirement absent from isolated-asset scores and pose estimates: at the captured metric state, the proxy should reproduce calibrated observations of the same instance. We present ObjectTwin, a scan-grounded measurement protocol that freezes the instance, cameras, scan-projected support and recorded depth, metric anchor, and evaluation denominator, then replaces only the object representation. The resulting asset correspondence gap measures lost observation agreement relative to scan-derived visible geometry without treating the scan as complete physical ground truth. Across two indoor RGB-D capture domains and two generation backends, visible, anchored generated assets lose 0.302-0.497 MaskIoU under this replacement. Every tested scene-level estimate is positive, while same-input generator preference reverses across capture domains. Coverage and overlap-depth analyses locate disagreement in both visible support and surface placement; the evaluated conservative pose refinement does not systematically recover it. These results establish capture correspondence as a separately measurable interface between generated-asset quality and stronger physical or task-level evaluation.

Closest papers

Nearest neighbours by meaning across the whole index.

RenderBench: Benchmarking Render-to-Real Video Transfer with Reconstructed Digital Twins

cs.CV ·2026-10-06 ·Dicong Qiu, Zhiyuan Xu, Yaosheng Liu, Feng Han, Bo Ye
benchmark similarity 0.67
Abstract · 10 pages, 4 figures, 2 tables

Modern video models can generate realistic videos from real appearance references and proxy renders that specify scene structure, viewpoint changes, and motion. Evaluating this render-to-real capability requires a real target video depicting the same scene evolution, paired with an editable, geometrically registered 3D replica. Such data has traditionally required substantial manual modeling, calibration, and animation effort. We introduce RenderBench, a benchmark of 12 reconstructed real-world scenes spanning large-scale indoor environments and egocentric viewpoints, with both static and dynamic settings. Our construction pipeline combines visual geometry, neural reconstruction, and assisted 3D authoring. Each scene is decomposed into static objects and dynamic actors, registered to the capture cameras, and accepted only after multi-view geometric and temporal validation. Each evaluation unit contains appearance reference images, a held-out real target video, an editable digital twin, a matched proxy render, and renderer-native scene annotations. We evaluate transfer models against paired real target videos, retain PAI-Bench-C-compatible structural projections, and use scene annotations to localize failures by object, visibility, articulation, and motion. The first release retains 12 of 14 registered samples (85.7%), comprising 1,496 paired real-proxy frames. All released scenes pass file-integrity and environment-edit audits, while proxy diagnostics yield a depth si-RMSE of 0.2170 and instance mIoU of 0.3673. RenderBench provides paired real observations and editable scene state for assessing both appearance fidelity and preservation of geometry and dynamics.

0.25

Trainspotting: Learning Object-Centric 3D Reconstruction from Found Photos

cs.CV ·2026-11-04 ·Hanyu Chen, Noah Snavely
benchmarkdatasetcode/data similarity 0.66
Abstract · project page: https://hanyuc.com/trainspotting

State-of-the-art feedforward reconstruction models perform poorly on in-the-wild object-centric photo collections. They are trained largely on single-session object captures whose images vary in viewpoint while the object and its environment remain nearly fixed. Public photo archives contain a different form of multi-view data. They hold found photos of the same object or design: photos taken independently by many people across years, environments, cameras, and sometimes physical units. In this work, we introduce Trainspotting, a dataset of 12,068 objects and 311,886 photos from Wikimedia Commons. We reconstruct each object to recover camera poses, multi-view stereo depth, and object masks. We categorize the objects into three regimes: objects fixed at one site, objects that move between sites, and designs shared by many physical units. Evaluating recent feedforward reconstruction models on Trainspotting shows that they fail most severely in the last two regimes. Fine-tuning VGGT-$Ω$ on Trainspotting significantly improves camera pose, depth, and 3D geometry on held-out objects. We observe similar improvements on the independent NAVI in-the-wild benchmark, which contains photos of each object in different environments. Performance on conventional benchmarks remains largely unchanged.

0.26

CODA: Depth-Aligned Scene Completion and Object Decomposition from a Single RGB-D Image

cs.RO cs.CVcs.LG ·2026-09-22 ·Dongwon Son, Junhyek Han, Yoontae Cho, Minseok Lee, Hong-seok Choi +3 more
code/data similarity 0.66
Abstract · 8 pages, 7 figures, 3 tables. Project page: https://dongwon-son.github.io/coda-project-page/

Robots operating safely in cluttered everyday environments often need to infer scene geometry from partial observations. Methods that detect objects in 2D and reconstruct them independently struggle in such scenes: a missed object is never reconstructed, a merged detection can fuse two objects, and separately reconstructed meshes may overlap or fail to touch their supporting surfaces. We introduce CODA (Complete Once, Decompose Afterward), a generative model that instead reconstructs the complete scene geometry from a single unsegmented RGB-D image, then separates the surface into the surrounding environment and movable objects. Still, generated scene geometry can drift from the observed partial point cloud. To reduce this drift, CODA uses two explicit 3D grounding mechanisms to keep reconstructed geometry consistent with observed surfaces while completing unseen regions. Experiments on HomebrewedDB and our custom cluttered-scene dataset show more accurate reconstructions and a higher fraction of objects remaining in place under simulated gravity than both object-first and scene-first baselines.

0.27

A Reproducible Reconstruction and Evaluation Framework for Photorealistic Lunar Analog Scene Reconstruction Toward Digital Twins

cs.RO ·2026-10-31 ·Antar Mazumder, Ryan Hartzell, Luke Boyd, Alexander Robinson, Neha Sharma +2 more
benchmarkcode/data similarity 0.66
Abstract

In this paper, we present a reconstruction pipeline that empirically quantifies the photorealistic scene reconstruction accuracy from both human-controlled and rover mast camera monocular feeds against physical ground truth as a function of Lunar traversal effects (e.g., motion blur, haze due to lofted regolith, trajectory bias, and sparse views). First, we benchmark six variants of 3D Gaussian Splatting (3DGS) across three Lunar analog scenes on held-out test sets using standard photometric metrics. We then establish how under traversal effects, this test-set-specific Novel View Synthesis (NVS) performance does not proportionally scale to the same photometric metrics in the reconstructed DTs. Our results quantify that splat training metrics alone are insufficient predictors of Cross-Reconstruction Photorealistic NVS Fidelity (CRPNVS), and that factors such as rover trajectory bias and geometric scene coverage play a critical role in determining the photorealistic quality of the reconstructed scenes targeting Lunar analog Digital Twins. Additionally, we pilot study Coverage Score ($S_c$), a geometry-based diagnostic derived from COLMAP poses and point cloud structure that provides a meaningful heuristic about the highest achievable CRPNVS structural fidelity, independently of splat training performance in the absence of a human-controlled reference. These findings establish a standardized, human control-referenced evaluation pipeline for photorealistic scene reconstruction for Lunar-analog Digital Twin development and future planetary exploration. Code and project page: https://rose-lab-admin.github.io/rose-lunar-dt-rec

0.34

Martine: Benchmarking Multi-View 3D Surface Reconstruction Across Viewpoint Coverage, Resolution, and Lighting

cs.CV ·2026-11-08 ·Robin Bruneau, Baptiste Brument, Frederic Giraud, Bastian Sigrist, Sascha Jecklin +3 more
top venuebenchmarkcode/data similarity 0.66
Abstract · Accepted at the 40th Conference on Neural Information Processing Systems (NeurIPS 2026), Track on Evaluations and Datasets. 23 pages, 14 fig…

Controlled acquisition setups are widely used for high-accuracy multi-view 3D surface reconstruction, as they allow sensor configuration, image resolution, viewpoint distribution, and illumination to be specified. Yet benchmarking remains difficult, since reconstruction accuracy depends jointly on the reconstruction paradigm, object properties, and acquisition regime. Existing benchmarks often restrict viewpoint coverage, resolution, or illumination, which can bias comparisons towards methods suited to the chosen setting. Others lack accurate 3D ground truth or quantified image-to-geometry alignment, limiting their use for metric surface evaluation. We introduce Martine, a benchmark for controlled 3D object surface reconstruction. Martine comprises 28 objects, including transparent materials and fine structures, captured at 9568 x 6376 pixels from 84 views over a spherical cap under both single-light and multi-light regimes. It provides object-independent camera calibration, accurate 3D ground-truth scans, calibration and image-to-geometry accuracy quantified on test images, and 3D property masks for analysing errors by material properties, visibility, curvature and fine structures. Experiments across photogrammetry, classical multi-view stereo, neural implicit surfaces, Gaussian-splatting-based reconstruction, and multi-view photometric stereo show that Martine enables regime-aware evaluation with explicit control over reference-data accuracy. The benchmark resolves sub-millimetric reconstruction differences, with a best observed Chamfer distance of 0.058 mm over the evaluated visible surface.

0.55

Initialization-Free Bundle Adjustment Revisited: A Controlled Experimental Study

cs.CV ·2026-08-18 ·Simon Weber, Mateo de Mayo, Je Hyeong Hong, Carl Olsson, Daniel Cremers +1 more
benchmarkcode/data similarity 0.65
Abstract

Initialization-free bundle adjustment (InitFree BA) aims to recover camera poses and scene structure directly from image observations, avoiding the geometric initialization stages of conventional structure-from-motion pipelines. Recent methods based on Object-Space Error (OSE) formulations and Variable Projection (VarPro) show encouraging optimization behavior from random camera configurations. However, existing evaluations primarily measure optimization success, leaving unclear whether a low OSE objective yields a valid metric 3D reconstruction. We revisit InitFree BA experimentally through a unified evaluation framework combining a C++ implementation of existing OSE formulations with a Blender-based dataset generator providing exact ground truth and controlled camera configurations and observation densities. Our experiments reveal a previously overlooked optimization--reconstruction gap: projective solutions with similarly low OSE values can lead to substantially different Euclidean reconstructions after metric upgrade. We identify initialization priors, landmark observation density, and metric-upgrade stability as key factors governing reconstruction success. Overall, our results suggest that the main challenge of InitFree BA is not merely minimizing OSE objectives, but obtaining projective reconstructions that admit reliable metric upgrade. We believe that the proposed benchmark, implementation, and analysis establish stronger experimental foundations for future research on initialization-free bundle adjustment, a problem largely unexplored within the computer vision community. Project page is available at https://github.com/simonwebertum/InitFreeBA.git.

0.41

OfficeTwin: Realizing 3D Reconstruction of Redundant Scenes through Partial Viewpoint Perception

cs.RO cs.CV ·2026-11-06 ·Quanyun Wu, Kyle Gao, Daisy Li, Kshitij Goyal, Dayou Mao +3 more
similarity 0.65
Abstract

Feed-forward 3D reconstruction turns an uncalibrated monocular stream into a dense point cloud in a single inference pass, orders of magnitude faster than classical structure-from-motion (e.g., COLMAP), and reliable on the weakly textured, repetitive surfaces where keypoint matching fails outright. However, raw point clouds lack the object identity, physical properties, and watertight volume required for robot learning. This gap widens under robot-native capture. A camera mounted on a robot constrained to a few degrees of freedom sees each object only partially, and the repetitive, weakly textured structure of an office makes distinct workstations nearly indistinguishable, leaving redundant and partial observations that downstream reconstruction cannot resolve. Existing image-to-3D generation methods struggle with these conditions, hallucinating geometry under incomplete views and confusing repeated instances. We present OfficeTwin, a robot-native framework that converts these incomplete observations into simulation-ready digital twins. OfficeTwin first imposes metric and structural constraints, then exploits the office's structural redundancy by registering repeated cubicles into a shared canonical frame, where complementary observations recover geometry occluded in any single view without hallucination. On a real office scan, OfficeTwin recovers every cubicle as an individually watertight, metric solid, outperforming feed-forward reconstruction and generative baselines that fail to produce simulation-ready assets.

0.23

Syn2RealTrack: Bridging the Gap Between Synthetic and Real-World Datasets for Online Multi-View Multi-Target Tracking

cs.CV cs.AI ·2026-08-25 ·Duong Nguyen-Ngoc Tran, Ngoc Doan-Minh Huynh, Cu Quoc Le, Hoang-Khang Nguyen, Long Hoang Pham +8 more
publishedpositioncode/data similarity 0.65
Abstract · This paper has been accepted by the AI City Challenge Workshop of the European Conference on Computer Vision (ECCV 2026)

Multi-camera 3D perception systems for warehouse scenes are trained largely on synthetic data and evaluated on physically captured environments. The resulting synthetic-to-real gap, which corrupts ground-plane localization and cross-camera identity association, is usually treated as one deficiency for a single domain-adaptation module to absorb; we argue instead that it enters the pipeline at three separable points: the camera calibration, the object shape prior, and the assumption that the object census is known, each admitting a different local remedy. Our online pipeline, Syn2RealTrack, follows this decomposition: lens distortion is recovered from images alone under a calibration that provides none, detections are fused across views by a visibility-weighted part-based descriptor that abstains on occluded parts rather than guessing, person height is measured in closed form from calibration instead of copied from a synthetic prior, and a closed-world cardinality prior is paired with a causal filter that removes the phantom boxes the prior manufactures. The system therefore adapts by reallocating trust between geometry and appearance without retraining a feature extractor. On the AI City Challenge 2026 Track~1 evaluation server it reaches a 3D Higher Order Tracking Accuracy (HOTA) of 52.0118%. The code will be released at https://github.com/SKKUAutoLab/aic26_mc3dp

0.68