CS Paper Radar

ResCom: Activation Residual Compensation for Large Language Model Quantization

Ning Yang, Bohan Cui, Zhuowen Liu, Yuting Wang

cs.LG cs.AI ·submitted 2026-10-25 03:02 UTC · v1

Abstract

Low-bit weight--activation quantization reduces the memory and computation needed to deploy large language models, but activation rounding can still degrade accuracy after calibration. Reconstruction from rounded inputs cannot distinguish activations within the same quantization bin. We propose ResCom, a low-rank correction that uses the activation rounding residual to compensate for the resulting layer-output error. An output-aware calibration procedure selects residual directions by their contribution to output reconstruction and computes the correction in closed form, without gradient training or updates to the calibrated weights. On Llama-3-8B with 4-bit weights and activations, rank-32 attention corrections reduce WikiText-2 perplexity from 7.708 to 7.147, improve MMLU by 2.89 percentage points, and raise five-shot GSM8K accuracy from 23.96 to 36.16 percent. Evaluations on models from 1B to 70B parameters and on held-out C4 test the method beyond this setting. The evaluated FP32 implementation adds 2.25 percent to 4K prefill time; a separate compact-storage implementation retains a 27.7 percent peak-memory reduction relative to FP16.

Comment
25 pages (10 pages main text + appendix), 9 figures, 20 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Align, Then Correct: Training-Free Two-Stage Low-Rank Compensation for Extremely Quantized Large Language Models

cs.LG cs.CL ·2026-10-06 ·Seobin Song, Geonho Lee, Janghwan Lee, Jungwook Choi
hot direction similarity 0.71
Abstract · 17 pages, 5 figures

Low-rank quantization error compensation (LQEC) recovers the accuracy lost under aggressive weight quantization by attaching a closed-form rank-$r$ adapter beside each frozen quantized weight, without any training. We show that existing compensators are limited by two shared simplifications. They calibrate symmetrically, evaluating the full-precision and compensated weights on the same activation, which yields a compensation target that is inherently high-rank -- so a fixed rank budget captures only a small fraction of it. And they minimize only the second-order term of the loss, although the compensated model is not stationary: a first-order descent direction larger than the applied compensation itself remains in every layer, and no reconstruction objective can absorb it. We propose a two-stage closed-form framework that removes both simplifications. Stage 1 aligns each layer's output with the full-precision model under a Fisher-weighted asymmetric objective, concentrating the rank budget on a rank-compressible target. Stage 2 re-measures statistics on the compensated model and applies a rank-constrained natural-gradient step that absorbs the remaining first-order signal. Every adapter is the result of a single truncated SVD; backward passes serve only to collect statistics. At 2 bits under QuIP#, our method reduces WikiText-2 perplexity from 12.43 to 10.26 on Qwen3-8B and from 21.11 to 13.22 on Qwen3-4B. On the held-out C4 corpus, it recovers 51% and 84% of the gap to FP16, versus 31% and 63% for the strongest baseline, with consistent gains in the seven-task zero-shot average, at higher bit-widths, and under a distinct quantizer.

0.34

ResServe: Accurate and Efficient FP4 LLM Inference with Residue Compensation

cs.DC ·2026-11-05 ·Shuo Rong, Ruibo Fan, Jiawen Wen, Xiaowen Chu
code/data similarity 0.70
Abstract · 26 pages, 20 figures, 9 tables, including appendices. Code: https://github.com/ShawRong/resserve

Block-scaled 4-bit floating-point (FP4) quantization reduces large language model inference costs but can degrade task quality. Higher-precision computation can mitigate this loss at the expense of some of the efficiency gains from FP4 inference. Narrow matrix computations common in decoding often leave spare hardware capacity for low-cost precision recovery. ResServe combines an FP4 activation base with an FP4-quantized residue representing information lost during quantization. It uses this spare capacity to compute the residue's contribution and combines results on-chip, avoiding extra result transfers. We apply this principle to linear layers and decode attention, while selective compensation limits added work when processing input prompts. On NVIDIA B200, compensated linear kernels using the NVFP4 format improve numerical precision while retaining latency close to uncompensated execution for the evaluated operations with few rows. In the evaluated NVFP4 inference configurations, ResServe adds at most 3.4% request-latency overhead over W4A4 and reduces request latency by 22.4-53.3% relative to W4A8. Across five models, code-generation accuracy improves over same-format uncompensated inference, with mean relative gains of 15.04% for NVFP4 and 53.57% for MXFP4.

0.39

Q-PACE: Dynamic Precision Allocation for Quantization-Aware Training

cs.LG ·2026-10-06 ·Alexandra Volkova, Matin Ansaripour, Erik Schultheis, Christoph H. Lampert, Dan Alistarh
similarity 0.70
Abstract

Quantization-aware training (QAT) leverages lower-precision arithmetic to reduce the cost of LLM deployment, but aggressive quantization degrades final model performance. A common remedy is mixed-precision training, in which high precision is assigned to some of the layers to maintain performance while keeping the cost constrained. This approach then requires precision assignments for model layers during training. We provide a new approach, called Q-PACE, consisting of a second-order sensitivity model that predicts the loss increase as a sum of quantization noise MSE weighted by per-layer curvature coefficients. During training, we periodically re-compute these coefficients using perturbations across layers, and re-assign precision. Pretraining and supervised fine-tuning experiments on LLMs of up to 4B parameters show that Q-PACE consistently improves over existing mixed-precision training recipes, and achieves comparable loss at substantially lower total memory budgets. We further find that quantization sensitivity is highly predictable by depth and layer type, and its stability during training allows for infrequent, cheap recalibration.

0.15

ResQAdam: Residual-Preserving Adaptive Optimization for Memory-Efficient Quantization Aware Training

cs.LG cs.CL ·2026-11-06 ·Liqun Ma, Shengkun Tang, Liangyu Wang, Lin Zhao, Wei Luo +5 more
similarity 0.70
Abstract

Quantization-aware training (QAT) is the most reliable way to obtain accurate low-bit large language models (LLMs), but training with AdamW keeps two dense FP32 states for every weight matrix. We find that low-rank memory-efficient optimizers such as GaLore and LDAdam degrade substantially in QAT. A considerable part of the QAT momentum lies outside its top-r singular subspace, and projection-based methods discard this part at every step. We further observe that this residual remains useful when only its sign is kept. Based on these observations, we propose ResQAdam. It keeps a single BF16 momentum, applies Adam only to the r x r coordinates of the principal subspace, and adds a normalized sign update computed from the residual. We evaluate ResQAdam with two from-scratch QAT methods and three QAT fine-tuning pipelines, with weights quantized down to 2 bits. It reduces optimizer-state memory by 71% to 74% relative to AdamW, stays close to AdamW in most settings, and lowers training throughput by less than 2%.

0.19

AlignQuant: Tile-Aligned Mixed-Precision Quantization for Efficient LLM Generation

cs.LG cs.AIcs.CL ·2026-10-05 ·Hanzhi Zhang, Qiao Zhang, Qinglei Cao, Heng Fan, Yan Huang +2 more
code/data similarity 0.69
Abstract

Fine-grained mixed-precision quantization promises efficient large language model inference, but local precision choices can conflict with regular GPU storage and computation units. This precision-boundary mismatch limits the translation of compression into practical acceleration. We introduce AlignQuant, a post-training quantization method that uses GPU-compatible two-dimensional weight tiles as the common unit of precision allocation, compact storage, and execution. This shared partition lets precision follow sensitivity within output channels. Joint prefill/decode calibration scores precision reductions using projection-output perturbations weighted by language-model loss gradients under quantized activations. Phase-normalized scores prioritize higher precision for tiles important to either phase under a model-wide weight-storage budget. Each tile stores one selected representation, while phase-specialized kernels reuse the packed model and expand lower-bit weights for INT8 computation with 8-bit activations. Across four LLMs spanning 3B to 14B parameters, AlignQuant achieves up to $2.50\times$ generation speedup over BF16 while preserving model quality. Evaluations further cover three GPUs and contexts up to 64K tokens. These results show that local precision flexibility and regular GPU execution can coexist through a shared tile unit. The implementation is available at https://github.com/HanzhiZhang-Ulrica/AlignQuant.

0.34

Softmax Reparameterization for Output-Head Quantization

cs.LG cs.AI ·2026-09-25 ·Asim Kadav, Christian Flores, Chirag Arora, Varun Kotte, Hongbo Zheng +3 more
published similarity 0.69
Abstract · 32 pages, including appendix, ICLR 2027 submission

Large vocabularies make output heads a substantial inference cost in small language models. We introduce softmax reparameterization, a post-training method that searches over functionally equivalent output heads before quantization. The method subtracts a scalar multiple of the vocabulary-row mean from every output row and selects the coefficient by validation KL. For linear-softmax heads, these shifts preserve full-precision predictions exactly and require no decoder retraining; a rank-one correction extends the construction to nonlinear logit paths. Across seven output heads and three quantizers, W4 gains are largest where baseline quantization substantially distorts predictions: test KL falls by 93% on XGLM under RTN and by 73--77% on Phi, BLOOM, and BLOOMZ under activation-weighted MSE. Heads with low baseline error change little; at W2, used as a compression stress test, benefits extend more broadly. On Phi, the gains persist under stronger GPTQ calibration; a separate untouched holdout reproduces the improvements on Phi and BLOOM. Frozen WikiText-selected coefficients also transfer without retuning to C4 and OpenWebMath. Residual analysis on Phi shows how fidelity can improve despite greater total logit error: the selected representative reduces error on likely outputs and lowers its Fisher-weighted cost. For shift-compatible heads, the shift adds no inference operation. With the decoder held in BF16, a packed W4 Phi output head reduces batch-one generation latency by 10.8%, and reparameterization preserves this speedup.

0.61

The Structure of Quantization Damage in LLMs: Why the Next Bit Should Be Spent Globally

cs.LG cs.CL ·2026-09-01 ·Jundong Hu, Shekar Ramachandran
similarity 0.67
Abstract · Preprint. Under review at a NeurIPS 2026 workshop. 11 pages, 4 figures, 8 tables

Post-training quantization (PTQ) is widely used to reduce the cost of serving large language models (LLMs), but its accuracy cost is uneven and is often tuned per model. We study where quantization damage occurs and how to allocate a small additional precision budget. Using causal mixed-precision intervention as ground truth (raise each layer to 8-bit in turn and measure the accuracy it recovers) across 9 open-weight models in 4 architecture families, we test 3 intuitive hypotheses: that quantization damage lives in task circuits, where the model computes, or in weight statistics. None of them predicts which layers benefit from restored precision. Recovery is instead diffuse: for 8 of 9 models, recovering 75% of the gap takes roughly half the layers; the lone exception, Qwen3-8B, is sharply concentrated. At a matched precision budget, spending it globally on finer quantization granularity beats locally repairing the most recoverable layers for all 8 group-128-compatible models (all but OpenLLaMA, whose width rules out group-128), by 21-52 points, including the concentrated Qwen3-8B. We report 2 secondary findings: the residual is budget-limited (8-bit is near-lossless in our evaluation across RTN, GPTQ, and AWQ), and the location of peak recovery correlates with architecture within a family, though not across families. Within this budget setting, global granularity is a better default than selectively protecting critical layers. More broadly, cheap signals that correlate with quantization damage do not necessarily identify where restoring precision improves accuracy; this must be tested with causal intervention.

0.39

TileQuant: Tile as the Precision-Allocation Unit for LLM Mixed-Precision Post-Training Quantization

cs.LG cs.AI ·2026-11-04 ·Hanzhi Zhang, Qiao Zhang, Qinglei Cao, Heng Fan, Yan Huang +2 more
code/data similarity 0.66
Abstract

Post-training quantization (PTQ) reduces large language model (LLM) deployment costs, but preserving quality requires accounting for uneven weight sensitivity. Uniform PTQ uses one weight bit-width, importance-aware PTQ adjusts scales or reconstructs weights within that width, and column-wise mixed precision retains selected columns at higher precision. However, sensitivity varies within columns, so whole-column retention also protects less sensitive weights, while runtime outlier detection adds decoding overhead. We therefore introduce TileQuant, a training-free framework that assigns precision to hardware-aligned 2D weight tiles. Offline calibration provides input-activation-aware scoring from forward statistics for lower calibration cost and gradient-informed scoring from loss sensitivity for stronger quality preservation. Within each projection's retention budget, the highest-scoring tiles remain at 16-bit and the rest use 8-bit. The resulting map guides reconstruction into compact weight buffers, which the kernel reuses for native integer and 16-bit computation with local accumulation to reduce memory traffic. Experiments show that TileQuant reaches 2.66x the original model's generation throughput. Across language modeling, reasoning, long-context retrieval, and question answering, it preserves quality and surpasses quantized and original models on multiple tasks. These results support selecting precision units that capture local sensitivity while enabling efficient hardware execution. The implementation is: https://github.com/HanzhiZhang-Ulrica/TileQuant

0.26