CS Paper Radar

UT-HMR: Uncertainty-Guided Temporal Modeling for Robust 3D Human Mesh Recovery

Zhibo Wang, Sirisha Rambhatla, Yuhao Chen, Maria Koshkina, David Clausi

cs.CV ·submitted 2026-10-26 19:41 UTC · v1
published

Abstract

Monocular 3D human mesh recovery (HMR) remains unreliable under weak observations caused by long camera-to-person distances, occlusion, and motion blur. In challenging scenarios such as sports, these factors make the problem highly ambiguous, as different 3D poses may yield similar 2D projections. This ambiguity is especially severe for one-stage HMR, which recovers all meshes directly from the full image without person crops or external 2D cues. To handle this ambiguity, we present UT-HMR ( Uncertainty-guided Temporal HMR), to our knowledge the first one-stage HMR framework to capture correlated pose uncertainty across joints. Each person query predicts a Gaussian distribution over the full SMPL pose with a compact low-rank-plus-diagonal covariance, which is converted into joint-wise precision weights for heteroscedastic supervision while keeping inference deterministic. Temporal early fusion further injects neighboring-frame evidence before pose decoding, supplying the visual evidence needed to resolve the ambiguity that the uncertainty captures. With a lightweight ViT-B backbone, UT-HMR achieves state-of-the-art results on VIP-HockeyPose-v2 (ice hockey) and WorldPose (soccer), reducing MPJPE, PA-MPJPE, and PVE by up to 4.7%, 3.8%, and 5.6%, and remains competitive on 3DPW against methods with larger backbones and higher input resolutions.

Comment
Accepted at WACV 2027

Closest papers

Nearest neighbours by meaning across the whole index.

STA-TFM: Spatio-Temporal Aggregation Across Views TransForMer for Pose Estimation

cs.CV ·2026-09-21 ·Mena Kamel, Natalie Won, Amrut Sarangi, Sven Jager, Albert Pla Planas
publishedcode/data similarity 0.74
Abstract

Monocular 3D human pose estimation (HPE) remains challenging due to depth ambiguity, occlu- sions, and the need for temporal consistency. While multi-view methods provide superior accuracy over monocular approaches, they often require complex setups. We introduce STA-TFM, a transformer-based architecture that combines spatial and temporal information for multi-view pose estimation. The approach leverages DSTformer, a monocular feature extractor, to capture long-range pose dependencies within each view. A fusion transformer then aggregates information across views to produce coherent 3D estimates. To address training data scarcity, we use a data generation pipeline that transforms any existing 3D pose dataset into multi-view setups with controllable parameters. Experiments on various datasets demonstrate that STA-TFM outperforms existing camera-parameter-free multi-view methods. STA-TFM achieves 50.9% and 49.5% reductions in mean per joint position error (MPJPE) and mean per joint velocity error (MPJVE) on the DHP19 dataset. Furthermore, it achieves 6.7% and 7.7% respective reductions on HAA4D, and a 15.2% MPJPE reduction on TotalCapture. STA-TFM handles noisy and missing 2D inputs, supporting potential deployment in healthcare monitoring, athletic assessment, and immersive technologies. Code, training checkpoints, and data are available at https://zenodo.org/records/22832620.

0.37

DirtyMoCap: Robust Motion Capture from Unconstrained Markers

cs.CV ·2026-09-17 ·Long Wang, Shuting Zhao, Shen Yan, Siyuan Yu, Xiaoben Li +3 more
code/data similarity 0.73
Abstract · Homepage: https://wanglongzju.github.io/DirtyMoCap-Project-Page

Optical motion capture delivers high-fidelity human motion, but its reliance on strict marker layouts and clean trajectories severely limits its real-world applicability. In practice, tracking systems frequently output unconstrained markers: sparse, noisy, and unordered point clouds with unknown or varying configurations. To bridge the gap between corrupted raw markers and parametric human models, we introduce DirtyMoCap, a robust, marker-layout-free framework. Our core insight is to map unordered marker observations to a fixed set of "proxy anchors" comprising skeletal joints and body surface points, which serve as a stable intermediate representation. We first initialize and track these anchors over long sequences using a recurrent sliding-window architecture. Then, a custom differentiable Gauss-Newton solver fits the SMPL-H model to the tracked anchors to recover full-body pose, translation, and shape. By explicitly deriving geometric residuals, our solver learns adaptive observation confidence, smoothness, and prior weights end-to-end, adapting dynamically to the reliability of the input data. Extensive experiments on diverse, noisy marker configurations demonstrate that DirtyMoCap successfully generalizes across arbitrary layouts using only a single trained model. It consistently outperforms state-of-the-art configuration-specific baselines in both joint and vertex reconstruction accuracy, while our custom CUDA solver achieves up to a 100x speedup over standard PyTorch implementations. We further apply DirtyMoCap to heterogeneous raw optical MoCap recordings of traditional Chinese martial arts, yielding a Kung Fu motion dataset of temporally coherent SMPL-H reconstructions. Code and data are available at https://wanglongzju.github.io/DirtyMoCap-Project-Page.

0.56

CQF-HMR: Continuous Quaternion Flows for Probabilistic 3D Human Mesh Recovery from a Single Image

cs.CV ·2026-09-01 ·Cuong Le, Bao-Long Tran, Pavlo Melnyk, Tahereh Dehdarirad, Bastian Wandt +1 more
similarity 0.73
Abstract · Under submission

Recovering 3D digital humans from a single 2D image is an ill-posed computer vision problem due to the loss of depth information. Probabilistic 3D human pose estimation compensates for this by estimating a set of 3D hypotheses from a prior distribution via generative models. However, most prior work focuses only on 3D keypoints, which often leads to implausible poses that are difficult to apply to downstream tasks, e.g. animation or digital humans. SMPL-based methods are more scalable thanks to the explicit body priors, but it requires more complex modeling of the generation process due to the non-additive nature of the joint rotations. In this work, we propose a novel approach for probabilistic 3D humans using quaternion-constrained continuous normalizing flows conditioned on 2D pose estimations. Our proposed quaternion flows show significant advantages over approaches using other rotation representations. Experiments demonstrate state-of-the-art results of our method on Human3.6M, particularly in ambiguous settings, and comparable pose estimation accuracy on challenging 3DPW and EMDB benchmarks.

0.30

CJRR-Net: A Candidate-Joint Reprojection Ranking for Future-View Selection in Human Pose Estimation

cs.CV ·2026-11-10 ·Huiting Xi, Marsha Mariya Kappan, Eduardo Benitez Sandoval, Francisco Cruz
top venue similarity 0.72
Abstract · 10pages, 4 figures, 4 tables. Accepted for oral presentation at the Australasian Conference on Robotics and Automation (ACRA 2026)

Multi-camera systems support performance recording, sports and human-movement analysis, where selecting an informative viewpoint is important for reliable human pose estimation. We propose the Candidate-Joint Reprojection Ranking Network (CJRR-Net) for future-view selection among eight calibrated cameras in MPI-INF-3DHP. The model combines current-view pose observations, camera configuration, and candidate-specific geometric features obtained by reprojecting the estimated 3D pose and its uncertainty into each candidate view. CJRR-Net achieves a selected-view 2D mean per-joint position error (MPJPE) of 105.18 pixels, compared with 114.64 pixels for the shared-input MLP and 117.56 pixels for adapted PoseErrNet. It also achieves the lowest mean error among the listed policies in each evaluated occlusion group. A blender rollout illustrates repeated camera selection. These findings support candidate-specific geometry for single-view selection in the evaluated fixed eight-camera setting.

0.35

DreamHMR: From Video Generation to Human Motion Modeling via Structural Focusing

cs.CV cs.AI ·2026-10-14 ·Zhengjie Xu, Ruihao Gong, Xianglong Liu
code/data similarity 0.71
Abstract · 25 pages, 7 figures

Human mesh recovery (HMR) provides a geometric foundation for understanding human motion, but accurately reconstructing both body motion and fine hand articulation from videos remains challenging, especially in real-world scenes where occlusion and partial visibility are common. Video generation pretraining offers rich spatial and temporal priors for this task, but its focus on visual synthesis leaves a gap between these representations and explicit human geometry. We present DreamHMR, a general framework that adapts video generation priors for complete body-and-hand reconstruction. It follows a global-to-local strategy, first grounding video representations in human geometry and then refining body and hand detail with reliable local evidence. Global Body Representation Transfer trains the video backbone to predict complete human renderings, turning its native prediction task into a means of learning surface correspondence and posed geometry. Local Joint Feature Enhancement combines contextual estimates with reliable local evidence to recover fine body and hand detail, while limiting interference from occluders and background. Experiments on five datasets with four video backbones demonstrate strong reconstruction performance across backbone families. Under a unified evaluation protocol, our best model outperforms the best existing methods on all reported metrics of 3DPW, EMDB-1, and RICH, reducing body MPJPE by 4.2%, 4.7%, and 6.1%, respectively. In more challenging occlusion settings on held-out BEDLAM and EgoBody sequences, DreamHMR reduces overall body and hand MPJPE by 7.0% and 10.0%, respectively. Our code will be made publicly available.

0.25

MoRE: Motion-Regularized Encoding for Articulated 3D Generation

cs.CV ·2026-10-21 ·Guantian Zheng, Shan Jin, Tim Tso, Hongfei Cai
similarity 0.70
Abstract · 6 pages, 3 figures, 4 tables

Generating an articulated object from a single image requires recovering both its appearance and the mechanism governing its parts. A compact encoding of joint attributes does not by itself ensure that reconstruction preserves the resulting motion. We present MoRE, Motion-Regularized Encoding for articulated 3D generation. MoRE represents coordinate-aligned joint lines with axis classification and two axis-orthogonal Plücker moment coefficients, removing the arbitrary choice of an origin along the axis. During representation learning, decoded joint hypotheses are used to move corresponding three-dimensional anchors, and their motions are compared with those of annotated joints. A differentiable expectation over joint types and axis directions couples attribute reconstruction to the motion it induces. An image-conditioned flow learns the resulting functional latents, while a multi-state-adapted Gaussian model supplies appearance. At inference, recovered part assignments and joints articulate a single set of rest-pose Gaussians without regenerating the object for each state. Experiments on PartNet-Mobility and ACD show stronger part-box agreement, articulated-state geometry and visual similarity than the compared baselines, while joint prediction reduces axis, origin and range errors relative to ArtiLatent. Controlled ablations support the joint-line encoding and show that motion supervision reduces anchor-motion error. Code and pretrained checkpoints will be released in the future.

0.26

Body of Evidence: Triangulating 3D Human Pose with Geometry-Conditioned Depth

cs.CV ·2026-11-16 ·Erik Brorsson, Kilian Freitag, Josef Bengtson, Kristofer Bengtsson, Lars Hammarstrand +2 more
similarity 0.70
Abstract

Even in multi-camera setups, occlusions can leave individual body joints with only a single usable 2D observation. Such an observation defines a viewing ray but leaves the joint's depth undetermined. We introduce Body of Evidence (BoE), a multi-view 3D human pose estimator that predicts per-camera joint depths alongside 2D joint locations. To reduce monocular depth ambiguity, we propose geometry-conditioned depth prediction, which combines image features with previously reconstructed 3D body geometry as contextual depth cues. We further introduce learnable depth-aware triangulation (LDAT), which augments differentiable algebraic triangulation with predicted depth constraints, enabling reconstruction even from a single contributing camera while preserving the benefits of geometric triangulation when multiple views are available. The reconstructed 3D poses subsequently guide depth prediction in the next iteration, allowing depth estimates and 3D geometry to progressively refine each other. Experiments on CMU Panoptic demonstrate state-of-the-art in-domain performance and superior average performance across evaluated camera subsets and unseen camera arrangements. BoE is particularly effective under sparse camera coverage, outperforming the previous state of the art by 10.6 AP25 points in the challenging three-camera setting.

0.15

MetricPose: Flexible 3D Human Pose Estimation with Depth and Geometric Cues

cs.CV ·2026-11-06 ·Shifan Zhu, Sabad Modi, Hang Yang, Arushi Agrawal, Steven Gao +3 more
published similarity 0.69
Abstract · 9 pages, 3 figures, ICRA submission

In this paper, we present a 3D human pose estimator that predicts metrically accurate human joint positions in the camera coordinate frame. This task requires recovering the configuration of the body joints, scale, and metric camera-local placement. In monocular images, body size and camera distance are coupled through perspective projection and therefore cannot be determined uniquely from image alone. This ambiguity can be reduced by combining three complementary sources of information: learned RGB priors, direct depth measurements, and geometric constraints (e.g., ground contact) from the environment. We extend a pretrained full-body estimator with optional metric depth and geometry-processing modules that improve camera-distance estimation and depth-guided body refinement while preserving RGB-only operation. The resulting unified model supports RGB, RGB-Ground, and RGB-D using shared learned parameters. Unlike pelvis-relative error, camera-local error also measures placement relative to the camera. Compared with the existing foundation model SAM 3D Body, our methods with RGB, RGB-Ground, and RGB-D modes reduce camera-local joint-position error by 12.16%, 31.00% and 54.61% respectively.

0.31