CS Paper Radar

Soft Temporal Alignment Distillation for Camera-to-mmWave Radar Human Activity Recognition

Jiuqi Yan, Chengbo Zhu, Chengdong Xu, Qisong Wu

eess.SP ·submitted 2026-10-27 04:50 UTC · v1

Abstract

Millimeter-wave (mmWave) radar provides privacy?preserving human activity recognition (HAR), but sparse point clouds limit its representation of body structure and motion. We propose a cross-modal knowledge distillation framework in which a teacher trained on camera-derived two-dimensional (2D) human keypoints supervises a radar-only student. The stu?dent combines PointNet-based point-set encoding, bidirectional temporal modeling, segment-level aggregation, and lightweight shared latent-channel scaling. The teacher retains contextualized states at every time step, whereas the student summarizes the radar sequence into a small number of segments, making fixed timestamp correspondence unsuitable for feature transfer. Soft Temporal Alignment Distillation lets each student segment adaptively retrieve and aggregate teacher temporal evidence into its distillation target. Alignment denotes student-conditioned representation-space matching rather than chronological or monotonic registration. On the Multi-Modal Non-Intrusive 4D Human Dataset (MM-Fi), the method improves radar-only ac?curacy from 87.04% to 89.17%, achieving the highest mean accuracy among the evaluated established and recent distillation baselines. It also obtains higher mean accuracy and macro?averaged F1 score (macro-F1) than the radar student under most evaluated point- and frame-dropout settings. Adaptation to our independently collected millimeter-wave Office Human Ac?tivity Recognition Dataset (mmO-HAR) improves accuracy from 80.33% to 87.75%, supporting the transferability of the distilled radar representation. The teacher and alignment branch are removed after training, enabling privacy-preserving radar-only inference without additional sensing or computational branches.

Comment
13 pages, 7 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Beyond Gait: Person Identification from Millimeter-Wave Point Clouds Across Activities of Daily Living

cs.CV ·2026-09-08 ·Xilai Wang, Zixiong Han, Saad Rhanmouni, Chenzhe Zhao, Yunze Lu +1 more
benchmark similarity 0.67
Abstract · v2: Revised the activity-identity learning framework, updated experimental comparisons, and improved manuscript presentation

Person identification from millimeter-wave (mmWave) radar point clouds has primarily focused on gait. However, since indoor walking is typically brief and fragmented, gait-based identification is largely constrained to designated passages that support continuous walking. Meanwhile, non-gait activities of daily living (ADLs) are pervasive and also encode discriminative personal signatures. In this study, we evaluate the feasibility of ADL-based identification from sparse mmWave point clouds using mm-ADL, a dataset comprising seven core ADLs collected from 11 subjects under controlled protocols. Moving beyond uniform gait introduces significant activity-dependent variations that confound identity representations. To address this challenge, we systematically benchmark three activity-identity learning paradigms: monolithic learning, joint multi-task learning, and two-stage activity-conditioned routing, under both closed-set identification (ID) and subject-disjoint re-identification (ReID) biometric settings. In parallel, we propose Dual-Stream Static-Dynamic PointNet (DS-SDPNet), an architecture tailored to radar point clouds that captures complementary spatial morphology and motion dynamics. Across seven ADLs, DS-SDPNet achieves 70.2% mean closed-set identification accuracy and outperforms existing baselines on both mm-ADL and mmGait. Moreover, benchmarking the three paradigms without ground-truth activity labels during inference yields up to 68.0% closed-set accuracy and 75.4% ReID mAP, providing a systematic baseline and confirming the feasibility of point-cloud-based biometric identification across diverse daily activities.

0.33

RaStream: Edge-Deployable Streaming Human Mesh Recovery from mmWave Radar

eess.SP ·2026-08-12 ·Jiazhen Dong, Lei Liu
benchmark similarity 0.67
Abstract

Millimeter-wave (mmWave) radar provides a privacy-preserving sensing modality for human motion analysis, yet continuous SMPL-X recovery on edge devices remains challenging because accurate reconstruction benefits from dense volumetric radar observations that preserve weak articulated reflections, while repeatedly processing such high-dimensional data over time incurs substantial computational cost. Temporal context is also necessary to resolve frame-local ambiguity, but SMPL-X attributes evolve at different rates, with body morphology remaining relatively stable and articulated pose, root orientation, and global translation changing rapidly. We present RaStream, a causal streaming framework that separates rich volumetric spatial perception from lightweight temporal reasoning. For each radar observation, a localization-conditioned spatial encoder exploits global scene context to estimate a coarse body location and focuses detailed reconstruction on a center-guided region of interest while preserving native 3D radar structure. Global and local features are then fused into a compact representation, allowing volumetric evidence to be extracted once per observation and temporal history to be propagated through compact representations and fixed-size persistent states. RaStream further maintains a slow morphology state for shape-related information and a fast motion state for pose, orientation, and translation. On the 661K-frame M4Human benchmark, RaStream reduces MVE from 90.90 mm for RT-Mesh to 84.27 mm with spatial-only inference and to 72.05 mm with causal temporal refinement. The Base configuration requires 26.93 ms per FP32 invocation on a Jetson Orin Nano. These results demonstrate practical edge-streaming radar mesh recovery through one-time volumetric evidence extraction and compact causal temporal propagation.

0.04

4D Radar Perception Algorithms for Autonomous Driving: A Review

cs.RO cs.CVeess.SP ·2026-09-16 ·Xumin Wu, Jun Zhou, Jilin Mei, Chen Min, Yu Hu
similarity 0.64
Abstract · 12 pages, 9 figures, 5 tables. Submitted to IEEE Sensors Journal

Research on 4D millimeter-wave radar perception algorithms has flourished in recent years, extending from signal processing and object detection to semantic segmentation, motion estimation, occupancy prediction, and dynamic scene reconstruction. This review organizes the field according to the evolution of perception tasks and algorithms. It first introduces radar fundamentals, data representations, and quality-enhancement methods, and then reviews object-level perception, motion and localization, local and dense spatial perception, and dynamic scene understanding. Across these directions, we compare radar-only learning, multimodal fusion, and cross-modal supervision and knowledge distillation. Particular attention is paid to how elevation, Doppler measurements, and radar physical priors are exploited across tasks. We further summarize the task coverage, input data, annotations, and evaluation protocols of existing datasets, clarifying the empirical support for different research directions. Finally, we discuss the common challenges and future directions of 4D radar perception for autonomous driving. This review provides a task-oriented perspective on the transition from sparse object perception to dynamic spatial understanding.

0.18

mmHRI: Towards Privacy-Preserving Human-Robot Interaction with Millimeter-Wave Radar

cs.RO cs.CV ·2026-09-28 ·Junqiao Fan, Yuxuan Hu, Bofan Lyu, Yanshuo Lu, Pengfei Liu +5 more
similarity 0.64
Abstract

Assistive robots increasingly operate in many human-centered environments and perform various human-robot interaction (HRI) tasks, such as object delivery. However, most existing HRI systems rely on RGB cameras that continuously observe humans to respond to non-verbal commands, such as hand gestures. This raises privacy concerns in privacy- critical environments, such as hospital wards or restaurants, where direct camera observation of humans is restricted. To develop privacy-preserving HRI, we leverage millimeter-wave (mmWave) radar, which can sense human motion through privacy barriers without identifiable imagery. We propose mmHRI, the first multi-modal robot manipulation framework that achieves mmWave radar-guided privacy-preserving HRI. mmHRI introduces two key designs to mitigate the sparsity and temporal inconsistency of radar data in cluttered robot manipulation environments. First, we propose a dual-stream architecture that jointly learns from unfiltered raw radar tensors and radar point clouds to estimate both human actions and 3D poses. To mitigate signal inconsistency, mmHRI further incorporates a memory-based state-space model (MSSM) that retains historical radar features to reduce abrupt changes in pose/action. These estimated human states are then converted into structured textual robot instructions, which control a vision-language-action (VLA) policy for closed-loop robot manipulation and human-aware reactions. Our evaluation covers human action recognition and closed-loop delivery and retrieval. In the privacy-preserving curtain setting, mmHRI achieves 85.09% action-recognition accuracy, outperforming existing radar-based alternatives. Robot trials further demonstrate successful delivery and retrieval under visual occlusion, with stable task performance across unseen subjects, clutter configurations, and environments.

0.57

PT$^3$: Prototype-Guided Self-Supervised Pretraining for Generalizable mmWave Human Point Cloud Representation

cs.AI ·2026-10-28 ·Ziyang Liu, Kieren Yu, Xiao Yang, Xin Yang, Kaishun Wu
similarity 0.64
Abstract · 30 pages

Multi-source millimeter-wave (mmWave) observations offer an opportunity to learn human representations reusable across sensing tasks. However, sparse detections and multipath effects make these observations unstable, challenging existing point cloud pretraining methods. We propose PT$^3$, a prototype-guided self-supervised pretraining framework for mmWave human point clouds. PT$^3$ represents local states in spatial regions as sparse compositions of shared prototypes and learns their temporal evolution through autoregressive prediction. Observation consistency further stabilizes representations under radar perturbations. After pretraining on unlabeled sequences from multiple sources, the same frozen encoder supports action classification, dense point generation, joint pose estimation, and future motion prediction on datasets not used for pretraining. Across these tasks, PT$^3$ outperforms the compared pretraining baselines and achieves competitive or superior performance to task-specific models.

0.30

RadarDINO: Distilling a Visual Foundation Model into mmWave Radar for Human Mesh Reconstruction

cs.CV ·2026-11-06 ·Furkan Mert Algan, Zhifan Ni, Eckehard Steinbach
similarity 0.64
Abstract

Millimeter-wave (mmWave) radar offers a privacy-preserving and illumination-robust alternative for human mesh reconstruction (HMR). However, high-fidelity radar HMR remains challenging. Sparse point cloud-based methods suffer from information loss and missed detections, while raw radar tensor methods like RT-Mesh lack fine-grained semantics and explicit local body modeling. In this paper, we propose RadarDINO, a radar HMR framework that distills visual semantics from a DINOv3 teacher into 3D radar representations and introduces explicit geometric supervision. DINOv3 descriptors are transferred to radar voxels via calibrated RGB-radar geometry, providing voxel- and body-part-level supervision for part-aware radar representations. We further incorporate vertex- and joint-losses to directly constrain reconstructed geometry. On the M4Human dataset, our method outperforms the SOTA baseline across all three evaluation splits.

0.19

A Universal Raw-IQ Radar Encoder for Cross-Sensor Human Sensing

cs.CV cs.LG ·2026-11-03 ·Jonas Leo Mueller, Dario Zanca, Sebastian Hoefler, Jan Petermann, Thomas Altstidl +3 more
publishedbenchmarkpositioncode/data similarity 0.63
Abstract · Accepted at the 2027 IEEE/CVF Winter Conference on Applications of Computer Vision (WACV)

Radar-based human sensing typically relies on end-to-end task-specific models trained on hand-chosen signal projections, which generalize poorly across unseen users, tasks, and hardware. We argue that the dominant signal processing choice, the micro-Doppler spectrogram, is a poor starting point for transfer because it keeps the Doppler axis, which carrier frequency rescales, and discards the angular axis, which carrier frequency leaves unchanged. We instead pretrain a convolutional beta-VAE without labels on clutter-removed raw radar measurements from four platforms spanning 60 and 77 GHz and 4 to 12 virtual antennas, aligned by a unified spectral interpolation grid. For every downstream benchmark the encoder stays frozen, and only a small supervised temporal classifier is trained on its embeddings. We compare against supervised models trained end to end on each benchmark and a pretrained radar foundation model across ten settings covering activity, gesture, sign-language, and gait recognition. When the test users and the radar are seen during training, our encoder is best on all five benchmarks. For users never seen in training, it leads on three of four benchmarks, by 4.8 to 23.2 points. On subject-disjoint gait recognition, it is best for each of the four held-out subjects and 8.3 points above the strongest baseline on average, even though its pretraining excluded every recording of this radar. Excluding the test radar from pretraining costs at most 5.3 points on any benchmark. Code is available at https://github.com/jonasmueler/UniversalRadarEncoder_WACV.

0.50

Floorplan-Context-Aware Cross-Environment Human Activity Recognition from mmWave Radar Point Clouds

cs.CV eess.SP ·2026-11-14 ·Zixiong Han, Xilai Wang, Chenzhe Zhao, Amr Mourad, Miodrag Bolic
similarity 0.63
Abstract · Submitted to ICASSP 2027

Human activity recognition (HAR) models based on mmWave radar point clouds and trained in controlled open spaces often experience performance degradation when deployed in furnished rooms. We propose a Floorplan-Context-Aware (FCA) HAR enhancement method that augments the input with subject-furniture relative position information to improve cross-environment performance. Because existing mmWave point-cloud datasets lack registered floorplans, we introduce a pseudo-landmark augmentation strategy for training the FCA model. In cross-environment evaluation on the mm-ADL-Home dataset, FCA achieves 77.70% accuracy and 65.49% macro-F1, improving upon the point-cloud-only direct-transfer baseline by 10.73 and 10.05 percentage points, respectively, and exceeding the strongest evaluated adaptation baseline by 7.37 and 6.27 percentage points. At deployment, FCA requires only a one-time registration of furniture landmarks, with no target-domain activity annotations or model weight updates.

0.21