CS Paper Radar

Tap2Listen: Instant Target Switching for Streaming Audio-Visual Speaker Extraction

Hansol Park, Minkyung Song, Zinu Kim, Yujun Lee, Hoseong Ahn, Hyunjin Choi, Kyuhong Shim

cs.SD cs.AI ·submitted 2026-10-27 05:03 UTC · v1
published

Abstract

Streaming audio-visual target speaker extraction (AV-TSE) uses a target speaker's face to extract the speaker's speech from an input audio mixture in real time. However, existing systems fix the target speaker for an entire clip, while conversation demands frequent and immediate target switches. To address this problem, we propose Tap2Listen, a streaming AV-TSE model designed for instant response to target switches. The model separates computation by modality: the target-agnostic audio encoder processes only the mixture, while the target-specific visual cues of the selected face condition only the decoder. A switch requires only a 0.12ms re-projection and takes effect immediately. We also design component-wise losses: a prediction loss for the encoder and a supervised extraction loss for the decoder. For evaluation, we measure how quickly output quality recovers after a switch. On the standard LRS3-2mix test set, Tap2Listen improves SI-SNRi from 8.85 to 9.68 dB at a comparable parameter count. After a switch to a known face, the model produces full-quality output from the first frame, whereas the baseline needs about 1 second to recover. Finally, we show that the proposed streaming AV-TSE model runs in real time on a single CPU core.

Comment
NeurIPS 2026 Workshop on On-Device Intelligence

Closest papers

Nearest neighbours by meaning across the whole index.

Adapting Personalized Speech Enhancement for Low-Latency Audio-Visual Target-Speaker Extraction

eess.AS cs.CVcs.SD ·2026-09-24 ·Rayhan Rashed, Senja Filipi, Ross Cutler
hot direction similarity 0.71
Abstract

Online audio-visual target-speaker extraction aims to remove competing voices while preserving speech quality and bounding lookahead. Existing extractors are built and evaluated for separation on synthetic mixtures, leaving listening quality and meeting behavior largely untested. We introduce Audio-Visual Personalized Voice Quality Enhancement (AV-PVQE), which approaches these requirements from the other direction. We start from a personalized speech enhancement model that reconstructs a requested voice at high quality but confuses the target in 46% of two-speaker mixtures despite clean enrollment. Adding mouth features at its speaker-conditioning input and jointly fine-tuning the visual and reconstruction networks reduces this rate to 1.6%, with no future frames and 20 ms of algorithmic delay. Compared with an online autoregressive audio-visual extractor, AV-PVQE yields separation gains on two synthetic benchmarks and larger gains on recorded meetings, and keeps its advantage on excerpts with more speakers than the fine-tuning mixtures. In personalized P.835 listening tests on two meeting corpora, it improves overall quality over this extractor by 0.57 and 0.63 MOS, with similar mean rating relative to the starting model. Preservation and rejection tests show that it keeps the target intact when no competing voice is present and suppresses competing speech when the target is absent.

0.21

Dialogue-Based Streaming Audio-Visual Target Speaker Extraction with Predictive Dialogue Information

cs.SD eess.AS ·2026-09-25 ·Shuhan Zhang, Wenxuan Wu, Haizhou Li
benchmarkcode/data similarity 0.68
Abstract · Submitted to ICASSP 2027

In face-to-face, real-time communication, a talking agent must track the target speaker through natural pauses, turn-taking, and backchannels, often amid background cross-talk. Most target speaker extraction (TSE) studies, however, rely on simulated mixtures with full or sparse overlap and ignore the turn-taking of real conversations. We therefore introduce, to our knowledge, the first benchmark for online audio-visual TSE (AV-TSE), built from intact dyadic interactions with independent third-party interference. Observing that anticipating upcoming activity from semantic, acoustic, and facial cues benefits online AV-TSE, we propose an LLM-based target-speaker voice activity projection (TS-VAP) module. Unlike conventional VAP with separated speaker channels, it forecasts the future activity of the target and conversational partner directly from the overlapping mixture, drawing on the linguistic and conversational knowledge of a speech-LLM, and uses this prediction to guide a low-latency separator. We further combine this predictive context with historical and synchronous speaker context. Experiments show that TS-VAP consistently improves streaming extraction across multiple AV-TSE backbones, and that further combining historical, synchronous, and predictive context yields nearly 1 dB gain on real AV conversations. Project page: https://jjjjiaozi.github.io/TS-VAP/.

0.34

Adding Voice Cloning to Text-to-Audio-Video Models with a Single Zero-Initialised Layer

cs.SD cs.AIcs.LGcs.MM ·2026-08-16 ·Ivan Mikheev, Viacheslav Vasilev, Anna Dmitrienko, Alexey Letunovskiy, Ivan Kirillov +2 more
benchmark similarity 0.67
Abstract

Text-to-audio-video (T2AV) generation models produce a video and its soundtrack from a textual description, but offer no control over whose voice speaks in the output. We show that a base T2AV model can be turned into a voice-cloning model by adding a single zero-initialized linear layer on top of its audio backbone, fine-tuning for a comparatively short training schedule, and conditioning on a short reference recording at inference time. The reference is injected through two complementary signals: its diffusion latents are prepended to the audio stream, and a global speaker embedding modulates token of the target audio. On a benchmark of 674 speaker-text pairs spanning 30 speakers we compare against five strong voice-cloning text-to-speech baselines: our enhanced 5B model attains the highest speaker-encoder cosine similarity (SECS) across three independent verification networks (ECAPA-TDNN, WavLM-SV, Resemblyzer), statistically significantly outperforming every baseline. A side product of the architecture is that the audio path can be evaluated without the video path at inference time, yielding a ~30x speed-up over the full audio-video diffusion loop while preserving the voice-cloning behaviour.

0.04

The ISCSLP 2026 Real-World Audio-Visual Speech Enhancement Challenge: A Benchmark with Natural Mixtures and Degraded Video

eess.AS cs.SD ·2026-08-24 ·Kai Li, Wenze Ren, Junjie Li, Cheng Yu, Peijun Yang +9 more
benchmark similarity 0.66
Abstract · The First Real-World Audio-Visual Speech Enhancement (AVSE) Challenge; Submitted to ICASSP 2027

Audio-visual speech enhancement (AVSE) uses a target speaker's visible articulation to recover that speaker's voice from overlapped speech. Yet most evaluation protocols rely on synthetic mixtures and reliable video. The ISCSLP 2026 Real-World AVSE Challenge addresses both gaps. Track~1 combines naturally recorded two-talker mixtures, which lack a clean reference, with reference-available remixes of the same speakers; Track~2 additionally degrades the target video in five ways and adds 3-m far-field recordings. Sixteen and twelve teams were ranked on speaker-disjoint test data by rank averaging over waveform fidelity, predicted quality, transcription accuracy, and speaker similarity. On Track~1 remixes, the best system reaches 12.7~dB SI-SDR and 0.85 STOI, but natural recordings remain harder: even the lowest CER rises from 9.0\% to 14.7\%. The leading systems use video mainly for speaker attribution rather than signal reconstruction, and the top two lose under 0.5~dB SI-SDR on Track~2. UTMOS and DNSMOS rank systems differently from the other metrics, so no single metric captures target-speech recovery. We release the baselines, evaluator, and official results.

0.23

Separate First, Then Associate: A Two-Stage Approach for Real-World Audio-Visual Speech Enhancement

eess.AS ·2026-08-14 ·Tongtao Ling, Zhong-Qiu Wang
similarity 0.65
Abstract

Audio-visual speech enhancement (AVSE) aims at extracting target speech from multi-speaker mixtures by exploiting visual cues. Although recent studies have reported strong performance on simulated datasets, the performance, however, often drops dramatically when they are applied to real-world audio-visual recordings. To bridge this gap, the Real-World AVSE Challenge held in the ISCSLP 2026 conference calls for participants to design a practical solution for AVSE under real-world conditions, where speaker overlap, acoustic interferences, room reverberation and visual degradations naturally co-exist. In our submission to the challenge, we propose a decoupled separation-then-association approach. It consists of two stages: a separation stage in which a trained, audio-only model (i.e., not using visual cues) is used to separate input multi-speaker mixture to individual speaker signals, followed by an association stage, where an audio-visual CLIP model is used to identify the separated speech signal with the highest similarity with the target speaker's facial video via cross-modal similarity matching. Evaluation results on the challenge dataset show the effectiveness of our proposed approach.

0.04

UniSwap: Streaming Audio-Visual Identity Swapping for Talking Videos

cs.CV cs.SD ·2026-08-12 ·Yuxuan Zhang, Haozhong Xiong, Jiayi Song, Jinpeng Yu, Yang Shi +3 more
similarity 0.65
Abstract

Talking-video character replacement requires coordinated transfer of appearance and voice while preserving the source motion, scene, linguistic content, and audio-video timing. Existing methods use separately optimized models for the two modalities, making audio-visual consistency difficult to enforce. We present UniSwap, the first framework for streaming joint audio-visual identity replacement in talking videos. Given a source video, a reference image, and a reference voice clip, UniSwap transfers the reference appearance and vocal timbre within a single audio-visual diffusion transformer while preserving the source content and dynamics. To address the scarcity of aligned cross-identity training pairs, we introduce a swap-and-reconstruct pipeline that removes visual and vocal identity from real clips and uses the original clips as reconstruction targets. Starting from a bidirectional backbone, we progressively adapt the model through In-context Pretraining for joint replacement, Conditional Streaming Adaptation for block-causal KV-cached generation, and Efficient Self-forcing DMD for mitigating exposure bias and reducing sampling from 30 to 3 denoising steps per block. Efficient Multi-LoRA Switching enables the three DMD roles to share a single frozen backbone. Feature-RoPE Decomposition keeps cached positions within the training range, supporting stable long-form inference. Experiments demonstrate strong audio-visual synchronization, competitive identity preservation, efficient streaming, and stable long-form generation.

0.34

A Lightweight Dual-Branch Visual Front-End for Efficient Audio-Visual Target Speaker Extraction

eess.AS ·2026-10-27 ·Zhan Jin, Peijun Yang, Juan Liu, Ming Li
similarity 0.64
Abstract

Audio-Visual Target Speaker Extraction (AVTSE) uses face-related visual cues to extract a target speaker from a speech mixture. In many AVTSE systems, visual features are obtained from convolutional image encoders, and their computation may become a non-negligible part of the overall system when lightweight separation backbones are used. This work proposes a dual-branch visual front-end that reorganizes visual information according to its spatial characteristics. A compact lip region of interest is used to model local articulation cues through convolutional processing, while facial landmark coordinates are used to represent global geometric motion with a lightweight temporal convolutional network. The two representations are integrated into IIANet and SpatialNet with limited fusion overhead. Experiments on LRS3-2mix under a unified reduced training protocol show that the proposed method achieves a performance-computation trade-off close to the lightweight image-based baseline. Compared with the ResNet18-based visual encoder, it reduces the module-level visual encoding computation by more than 90% across both evaluated separation backbones, with a moderate performance gap. This comparison excludes face detection and landmark estimation and therefore applies to systems where landmark coordinates are already available from preprocessing. Demos are available at https://anonymous.4open.science/r/Lightweight-Visual-Frontend-E46E.

0.22

PromptSep-Speaker: Generative Target Speaker Extraction via Multimodal Prompting and Semantic Alignment

cs.SD eess.AS ·2026-10-16 ·Yutong Wen, Ke Chen, Prem Seetharaman, Haonan Chen, Oriol Nieto +3 more
similarity 0.64
Abstract · Submitted to ICASSP 2027

Target speaker extraction (TSE) isolates a desired speaker from a multi-speaker mixture using cues that identify the target. Prior work has explored acoustic and textual cues, such as enrollment audio and different types of speaker descriptors, but typically relies on a single cue family. Yet no single cue is both broadly available and reliably discriminative. Moreover, most TSE systems adopt mask-prediction models, which are prone to audible artifacts and generalize poorly across acoustic conditions. To address these limitations, we propose PromptSep-Speaker, a generative TSE model based on latent diffusion that unifies four interchangeable cues: speaker temporal order, transcript, enrollment audio, and speaker caption. The generative formulation delivers higher separation quality and multi-modal prompting improves applicability across scenarios. To fully exploit each cue, we further introduce a frozen WavLM representation with an auxiliary alignment loss that supervises query-mixture cross-attention without extra labeling. Across four evaluation sets and a listening study, PromptSep-Speaker achieves state-of-the-art performance over TSE and universal source separation baselines, improving separation accuracy and quality across cue modalities.

0.11