CS Paper Radar

Dexterous In-Hand Object Pose Reaching with Learned Safety Filters

Ian Chuang, Hiya Shah, Vamsi Chilamkur, Iman Soltani, Claire Tomlin

cs.RO cs.LGeess.SY ·submitted 2026-10-27 17:58 UTC · v2
code/data

Abstract

Dexterous manipulation with multi-fingered hands is the next frontier of robotics, yet learned hand skills remain limited to simple grasps or basic repeated motions, such as rotating an object. As robots attempt more demanding in-hand maneuvers, safety, such as not dropping the object, becomes critical, yet it is rarely measured. We study in-hand object pose reaching, a task that demands diverse and difficult grasps: moving an object to almost any position and orientation within reach of the fingers, at any wrist orientation, through long sequences of consecutive goals. We present a recipe for training such policies for a LEAP hand in simulation without human data, built on a range of insights, from diverse resets and goals via generated grasp datasets to an adaptive friction curriculum. With careful system identification, the policies transfer zero-shot to the real hand, using either motion capture or a single wrist-mounted depth camera, and prove remarkably capable and robust. On top of the task policy, we add a learned residual safety filter with adjustable conservativeness, letting us tune the balance between performance and safety and greatly reduce object drops. In 13.3 hours of real-robot evaluation over 4,800 unseen goals across 4 objects and diverse wrist orientations, the state-based policy reaches 95.2% of goals within 2 cm and 0.4 rad, and the filter cuts its drops by 75% while still reaching 91.5% of goals. The policies can also spin a lightbulb held in an arbitrary pose, reach out-of-distribution goals, withstand fast arm motion and perturbations, and, needing only a wrist camera, serve as portable skills such as screwing in a lightbulb. We release the full recipe as a platform for studying performance, reliability, and safety in high-dimensional dexterous systems. Videos and more are available at https://ian-chuang.github.io/dexsafe/.

Comment
26 pages, 30 figures, 14 tables. Project page: https://ian-chuang.github.io/dexsafe/

Closest papers

Nearest neighbours by meaning across the whole index.

ArtManip: Category-Level Articulated In-Hand Manipulation

cs.RO ·2026-09-11 ·Yang Yang, Tengyu Liu, Puhao Li, Zeyuan Chen, Yuyang Li +4 more
similarity 0.79
Abstract

Category-level in-hand manipulation of articulated objects is a formidable yet underexplored challenge for dexterous robotic hands. This difficulty stems from two core bottlenecks: first, controlling an object's internal degrees of freedom is tightly coupled with maintaining grasp stability on a free-floating base; second, acquiring diverse object models and functional grasps at scale is highly labor-intensive, yet vital for generalization given the system's sensitivity to initial configurations. In this work, we present ArtManip, the first category-level articulated in-hand manipulation method that generalizes across object instances and diverse initial grasps. For initial configuration construction, we develop an automated pipeline that procedurally generates diverse articulated objects and synthesizes task-oriented functional grasps. For policy learning, we propose a robust two-stage training strategy that incorporates articulation physics randomization, reward curriculum, and latent representation distillation to handle complex contact and joint dynamics during deployment. Extensive experiments across four object categories demonstrate that our policy generalizes to unseen instances and varied configurations in simulation, and achieves zero-shot transfer to 12 real-world objects featuring diverse shapes and joint mechanics.

0.40

OATH: Object-Agnostic Tracking for Dexterous Hands, Enabling Rapid Physics-based Retargeting

cs.RO ·2026-10-09 ·Solvin Sigurdson, Prasanna Sriganesh, Juan Borbon, Joel Burdick, Dingqi Zhang +1 more
code/data similarity 0.78
Abstract · 8 pages, 7 figures, 3 tables. Project page: https://multiplylabs.github.io/oath/

Retargeting human demonstrations into dynamically feasible dexterous hand trajectories requires resolving complex contact physics, yet current methods either omit physical constraints or rely on computationally expensive sampling-based optimization in simulation. Reinforcement learning has previously been used to achieve planning and control through contact dynamics; however, standard policies require object-specific training and fail to generalize across arbitrary geometries. This work reframes physics-based retargeting as a residual learning problem, where we demonstrate that zero-shot generalization across objects relies on structured state representations. Specifically, formulating the observation space to include a localized contact-error signal guiding each robot link to its target coordinate on the object surface enables a single, unified residual policy to successfully grasp novel, unseen object geometries. Rolling out this policy in simulation on a kinematic reference trajectory yields a physics-based retargeter, OATH. Operating at 0.4 seconds of compute per second of reference, OATH achieves 2.4x faster-than-real-time performance and a 60-350x reduction in computational cost compared to sampling-based methods. The system recovers 58% of held-out and 54% of unseen-object DexYCB trajectories while maintaining a sub-2 cm tracking error.

0.29

Catch It All!: Generalizable Dynamic Catching with a Dexterous Hand

cs.RO ·2026-10-28 ·Arth Shukla, Kehlani Fay, Huaze Liu, Darin Djapri, Alexiy Buynitsky +1 more
similarity 0.78
Abstract

Catching arbitrary objects requires generalization to novel projectiles and real-time adaptation to unpredictable contact dynamics under noisy visual observations. This paper presents Catch It All!, a sim-to-real catching framework for humanoid robots that generalizes and adapts to unseen objects with variable physical properties for underhand and overhand catches, using only one egocentric camera. We learn policies which generalize to unseen objects with varying geometry, deformability, elasticity, and physical properties. Effective grasps which adapt real-time to object poses and shapes are learned through careful grasp reward design. We provide safety-aware curricula which enable safe, high-frequency action execution near hardware limits, including wrist torque limits as low as 5 Nm. We validate our system by deploying zero-shot on a Unitree G1. With only one egocentric camera, Catch It All! successfully performs underhand and overhand catches on 9 unseen objects not seen during training, including low-rebound plushes, semi-deformable toys and chip bags, and rigid-elastic objects with high rebound on contact.

0.17

Whole-Body Dexterity

cs.RO cs.AIcs.LGeess.SY ·2026-10-15 ·Conor Mc Gartoll, An Dang, Pranay Thangeda, Arjun Gupta, Carolina Higuera +3 more
similarity 0.77
Abstract · 20 pages, 13 figures

Current humanoid dexterous manipulation remains largely confined to end-effectors and simple grasps, falling short of humans' ability to engage the entire body by bracing and sliding bulky objects against the arms and torso. We introduce Whole-Body Dexterity (WBD), a general framework that uses the robot's body and appendages as contact surfaces to grasp and manipulate objects. Our sim-to-real pipeline first generates a dataset of feasible whole-body grasps, then trains reinforcement-learning experts on a general any-to-any repositioning objective by sampling initial and goal grasps from the dataset, and distills these experts into a single policy that uses proprioception and object geometry. We show that the distilled policy transfers zero-shot to a real Unitree G1, where it repositions a basketball and a cardboard box to regions around the torso and completes a long-horizon task that stows a box under one arm, carries it from a shelf to a table, and places it. The controller operates interactively, steered by coarse motion references from a human teleoperator. Across real-world whole-body manipulation tasks, the distilled controller completes 90% of trials, compared with 18% for direct retargeting and 4% for a generalist whole-body controller.

0.39

DexHOT: Learning Hand-Object Configuration Transfer for Dexterous Manipulation

cs.RO ·2026-11-03 ·Zhewei Gui, Anthony Bolton, Jiyao Zhang, Zeyuan Chen, Qiyang Yan +2 more
similarity 0.77
Abstract · 9 pages, 4 figures

Dexterous manipulation involves not only moving objects, but also arranging the hand around them to maintain useful contacts and enable subsequent actions. Yet many learning-based systems specify goals primarily through object poses or trajectories, leaving hand-object configurations to emerge implicitly. We introduce DexHOT, which formulates dexterous manipulation as hand-object configuration transfer: moving between feasible configurations that jointly specify hand articulation and object pose relative to the wrist. DexHOT learns a reusable relation-conditioned transfer primitive from synthetic feasible configuration pairs, without human reference motions, and composes long-horizon behaviors through closed-loop tracking of configuration subgoals. On DexHOTBench with 120 objects, a single policy achieves 80.5% transfer success on seen objects and 69.4% on unseen objects; on a real dexterous hand, it achieves 61.5% success over 200 real-robot transfers and 90% task success across six demonstration-guided tasks. These results show that explicit hand-object goals provide an expressive and composable interface for dexterous manipulation. More details and videos are available at https://dex-hot.github.io/.

0.27

PiHand: Latent Hand-Object Interaction Priors for Physics-Based Policy Learning

cs.CV ·2026-10-22 ·Niklas Berndt, Xianghui Xie, Enes Duran, Yixiao Wang, Gerard Pons-Moll
code/data similarity 0.77
Abstract · Project page: https://virtualhumans.mpi-inf.mpg.de/PiHand/

Synthesizing physically grounded dexterous hand-object interactions is important for VR/AR, gaming, and robotics, yet remains challenging because subtle contact dynamics, diverse object geometries, and target trajectories must be jointly respected while maintaining natural grasps. Existing methods either track mocap trajectories with limited transfer to novel objects, or rely on hand-only generative priors that fail to capture coupled hand-object motion, sacrificing contact fidelity and sample efficiency. To tackle these challenges, we introduce PiHand, a Physically grounded Interaction-aware Hand motion synthesis framework. PiHand first trains expert policies that track mocap demonstrations in simulation, distills them into a unified hand-object interaction prior using a goal-conditioned VAE, and finally solve diverse dexterous manipulation tasks through bounded residual exploration in its latent space. With only a single reward and no complex curriculum training, this yields general tabletop manipulation policies that generalize to unseen objects and trajectories on GRAB and DexYCB. The same prior transfers to object catching and bimanual handover, two tasks that are rarely seen in its training data. Across all tasks, PiHand consistently outperforms baselines in all metrics. We will release the processed data and model checkpoints.

0.24

DexArena: A Unified Benchmark for Long-Horizon Dexterous Manipulation

cs.RO ·2026-11-02 ·Haonan Ping, Jianshu Hu, Yimin Wang, Yi Zhu, Pai Liang +10 more
benchmarkcode/data similarity 0.77
Abstract · Project page: https://sipair-elastic.github.io/DexArena-website/

Long-horizon dexterous manipulation remains a fundamental challenge for robot learning, requiring the composition of multiple skills, precise bimanual coordination, generalizable visual understanding, and robust skill transitions. Yet existing manipulation benchmarks largely emphasize isolated skills or support only a limited range of end-effectors, making these capabilities difficult to evaluate systematically. We introduce DexArena, a benchmark designed to evaluate learning and generalization in long-horizon bimanual dexterous manipulation. DexArena features 10 long-horizon tasks and 30 stage-level tasks spanning diverse household and industrial scenarios. Each long-horizon task is composed of explicitly defined stages with physically grounded success conditions, enabling reliable evaluation of both intermediate progress and end-to-end task completion. A unified benchmark interface and verified human-teleoperated demonstrations enable testing different policy learning algorithms, with standardized simulation configurations, scene randomization, trajectory replay, and task-level evaluation. Through extensive baseline experiments, we identify substantial challenges in precise manipulation, generalization to scene variation, and skill composition. DexArena establishes a challenging and reproducible benchmark for developing robot learning methods that move toward generalizable long-horizon dexterous behavior.

0.23

DexMimic: A Generalist Dexterous Hand-Object Tracking Policy via Value-Guided Reset Allocation

cs.RO cs.AI ·2026-10-13 ·Zhexi Luo, Zhixuan Xu, Rui Yang, Zeyu Xiao, Yiwen Hou +1 more
benchmarkcode/data similarity 0.76
Abstract · 13 pages, including 4 pages of supplementary material. v2: Updated author affiliations; scientific content unchanged. Project page: https://…

Achieving human-like dexterous manipulation remains a central challenge in robotics. Learning from human hand-object interaction (HOI) datasets offers a promising pathway to diverse dexterous skills, yet existing physics-based approaches train specialist policies for individual trajectories, thereby limiting skill reuse at scale. We introduce DexMimic, a generalist dexterous hand-object tracking policy jointly trained across diverse HOI trajectories. Efficient joint training requires allocating each rollout to both an undertrained phase and a starting state that supports continued tracking. DexMimic realizes this insight through Value-Guided Reset Allocation, which adapts the initialization distribution online to prioritize difficult phases and select reset states with higher expected tracking returns. We further introduce a benchmark spanning training, fine-tuning, and generalization. Experiments show improved tracking success and training efficiency, faster fine-tuning, and the potential for zero-shot generalization to unseen trajectories and objects; larger training sets further improve efficiency and generalization. Finally, we validate DexMimic on a real-world dexterous manipulation platform.

0.31