CS Paper Radar

Sparse tensor networks for individual tree diameter estimation in mixed forests

Clara Lößl, Fabian Ewald Fassnacht, Viacheslav Barkov

cs.CV ·submitted 2026-10-27 18:05 UTC · v1

Abstract

Measurements of tree diameter at breast height (DBH) are fundamental to forest inventories, but manual surveys across entire stands or regions are impractical. UAV-borne laser scanning (ULS) enables scalable automated forest surveys, yet canopy occlusion makes accurate DBH estimation from ULS point clouds non-trivial. Limited stem-level point density of ULS data constrains approaches relying on detailed stem reconstruction, such as Quantitative Structure Models (QSMs) and circle fitting. Empirical machine learning methods based on predefined point cloud metrics are an alternative. New deep learning approaches offer an even more principled solution, allowing models to learn directly from point clouds. Sparse tensor networks have shown particular promise, transforming forestry tasks such as tree species classification. We investigate whether these strengths can be extended to estimate individual tree DBH from ULS data across four mixed-species temperate forest plots in Germany. We further advance existing sparse tensor networks by introducing TreeNext, a lightweight deep learning architecture for direct individual tree parameter estimation from voxelized LiDAR point clouds. We present a fully automated forest inventory pipeline from individual tree instance segmentation to DBH regression, and quantify the impact of segmentation errors by comparing performance on automatically segmented and ground truth instances. TreeNext achieves an $R^2$ of 0.8355 on automatically segmented trees and 0.9380 on ground truth segments, outperforming strong tabular baselines including Random Forest and XGBoost. Segmentation quality emerges as the dominant error source in the automated pipeline. TreeNext proves highly data-efficient, performing well even in small data scenarios. Our findings establish sparse tensor networks as a practical foundation for automated individual tree DBH estimation from ULS.

Closest papers

Nearest neighbours by meaning across the whole index.

The Role of Radiometric Features in Cross-Site Leaf-Wood Segmentation of LiDAR Point Clouds

cs.CV ·2026-09-18 ·Roman Kaharlytskyi, Derek T. Robinson, Roberto Guglielmi
published similarity 0.76
Abstract · 5 pages, 6 figures. Accepted for presentation at IGARSS 2026 (IEEE International Geoscience and Remote Sensing Symposium)

Leaf-wood segmentation of individual trees from LiDAR point clouds is essential for quantitative structure models (QSMs) used in non-destructive biomass estimation. Existing segmentation methods typically exclude radiometric features (e.g., intensity, return number) to maximize cross-sensor compatibility. We challenge this design choice by evaluating cross-site and cross-platform generalization: training on the public Heidelberg dataset (terrestrial TLS, 1550nm) and testing on a novel dataset from Ontario, Canada (RPA-LS, 905nm). Results show that geometry-only methods - including state-of-the-art deep learning models trained on high-density LiDAR datasets - fail to generalize to the sparse, top-down geometry of aerial scans, achieving F1 scores <= 0.56. Incorporating radiometric features (intensity, return number, number of returns) improves F1 to 0.61, but more critically, increases wood recall by 119% from 0.16 to 0.35. Furthermore, geometry-only approaches often result in fragmented stem and branch components. We find that leveraging radiometric features preserves greater structural connectivity, resulting in more coherent architectures that are better suited for QSM reconstruction. We demonstrate that while geometric patterns are view-dependent and prone to overfitting scan patterns, radiometric features encode physical material properties that generalize across disparate sensors and environments.

0.32

CedarCypress3D: an annotated UAV-LiDAR dataset of individual trees in planted cedar and cypress forests

cs.CV ·2026-08-31 ·Katsuto Shimizu, Fumiaki Kitahara, Tomohiro Nishizono, Hideki Saito, Masayoshi Takahashi +6 more
code/data similarity 0.75
Abstract · 15 pages, 8 figures

Individual tree measurements derived from Light Detection and Ranging (LiDAR) mounted on Unmanned Aerial Vehicles (UAV) provide valuable information for forest inventory, ecosystem monitoring, and sustainable forest management. Recent advancements in machine learning have increased the demand for annotated datasets to develop and evaluate point cloud-based approaches, especially for individual tree segmentation. However, publicly available annotated UAV-LiDAR datasets in temperate forests are limited. In this article, we present CedarCypress3D, a manually annotated UAV-LiDAR dataset collected in Japanese cedar (Cryptomeria japonica) and Japanese cypress (Chamaecyparis obtusa) plantations in Japan. The dataset consists of UAV-LiDAR point clouds and field survey measurements from 34 circular plots across two sites with different topographic characteristics, along with terrestrial LiDAR point clouds available for a subset of 22 plots. A total of 1,627 trees were measured in the census field survey and manually annotated to match the corresponding trees in the UAV-LiDAR point clouds. For the subset of plots with terrestrial LiDAR data, semantic labels (i.e., stem and non-stem) were additionally assigned to tree points in the UAV-LiDAR data. CedarCypress3D provides high-quality annotated UAV-LiDAR data for developing and evaluating individual tree instance segmentation and semantic segmentation methods in temperate planted forests. The dataset can also support research on tree attribute prediction and multi-platform LiDAR analysis. The dataset is publicly available at https://doi.org/10.5281/zenodo.22168721.

0.33

Toward a foundation model for forest point clouds

cs.CV cs.RO ·2026-09-21 ·Yuanwen Yue, Stefano Puliti, Damien Robert, Atakan Topaloğlu, Binbin Xiang +5 more
code/data similarity 0.71
Abstract · Project page: https://prs-eth.github.io/ForPT

Forest inventories increasingly rely on artificial intelligence (AI) models to derive forest attributes from large-scale 3D point clouds. Current models are typically specialized to a single task, sensor, and forest type, making adaptation expensive in terms of annotations, computation, and expertise. We ask whether a single pretrained model can instead learn transferable representations across diverse forest inventory settings. Inspired by recent developments in language modelling and computer vision, we take a step toward a foundation model (FM) for 3D forestry. Using LitePT as backbone, we first establish a strong supervised baseline that sets a new state of the art on forest semantic and instance segmentation, tree species classification, and age regression benchmarks. We then curate a large-scale unlabelled corpus spanning airborne, UAV, and mobile laser scanning across diverse forest ecosystems, and pretrain the same backbone using self-supervised learning. We systematically evaluate representation learning strategies by comparing training from scratch, supervised pretraining, and self-supervised pretraining across four representative forestry tasks, under varying annotation budgets. Compared with training from scratch, self-supervised pretraining accelerates model convergence and consistently improves performance when annotations are scarce. Compared with task-specific supervised pretraining, self-supervised pretraining yields more transferable representations across downstream forestry tasks. These findings identify the practical regime in which pretrained representations are most valuable and suggest that instance discrimination, rather than forest semantics, is the main remaining obstacle to a general-purpose 3D forest foundation model. Code and models are available at: https://github.com/prs-eth/ForPT.

0.32

Transferable Above-Ground Biomass (AGB) Estimation Model from Multi-Sensor Data with Sparse Field Calibration

cs.LG cs.CV ·2026-08-12 ·Pann Thinzar Seint, Bryan Atwood, Subas Chhatkuli
similarity 0.65
Abstract

Spatially continuous quantification of forest above-ground biomass (AGB) is what makes carbon accounting credible and mitigation strategies actionable. While field inventories provide high localized accuracy, they are spatially sparse; conversely, spaceborne LiDAR from the Global Ecosystem Dynamics Investigation (GEDI) offers broad biomass samples but lacks spatial continuity and systematic underestimation of high-biomass forests. This paper presents an operational framework centered on a single globally trained convolutional neural network (CNN) that is seamlessly adapted to each new landscape through a lightweight empirical field-calibration workflow. The global model combines optical (Sentinel-2), C-band SAR (Sentinel-1), L-band SAR (ALOS-2 PALSAR-2), and terrain (DEM) data. It is trained once against GEDI Level-4A biomass reference data spanning multiple regions and both wet and dry seasons so that it learns the persistent woody-structure rather than a single-date appearance. To avoid retraining for every landscape, the framework applies a small number of local field plots to fit a scale-and-bias correction that aligns the global prediction with ground truth in each region. The pipeline harmonizes sensor data onto a shared 10 m grid, derives vegetation indices and polarimetric ratios, computes per-band normalization stats, and trains the CNN with a hybrid log-domain SmoothL1 with RMSE loss for skewed biomass distribution. On held-out validation the global GEDI-based model achieved R^2 approximately 0.78 and RMSE approximately 22 Mg/ha. A subsequent field calibration combining Random Forest fine-tuning under a 10-fold cross-validation eliminates localized regional biases. This improves local validation performance to R^2 approximately 0.82 and reduces RMSE to approximately 15 Mg/ha, outperforming both the uncalibrated global model and the ESA CCI Biomass product against field plots.

0.04

3Dtrees.earth: community research infrastructure for tree and forest analysis using close-range LiDAR data

cs.DL ·2026-10-27 ·Janusch Vajna-Jehle, Kilian Gerberding, Daniel Lusk, Teja Kattenborn, Julia Sophie Gäßler +273 more
similarity 0.63
Abstract

From individual trees to forest stands, three-dimensional structure shapes carbon, water, and energy flows, habitat conditions, and resource availability. Yet tree and forest structural attributes remain difficult to assess consistently across space and time. Close-range LiDAR (light detection and ranging) records detailed 3D structure from branches and trees to forest plots, including trees outside forests. However, broader reuse is constrained when data, acquisition context, processing, computation, and access conditions are maintained separately. We present 3Dtrees.earth, an operational community research infrastructure that brings close-range LiDAR datasets, analysis tools, and computing resources together while linking original observations to their metadata and processing outputs. As of 23 October 2026, the platform comprised 2,760 datasets, including 2,481 publicly visible datasets. These point cloud datasets span 46 countries on all six inhabited continents and include terrestrial, mobile, and uncrewed aerial laser scanning. Users can contribute and discover datasets, run standardized processing workflows on shared computing infrastructure, inspect point clouds and model predictions in the browser, and access data and processing outputs together with citation information. Workflows combine rule-based and machine-learning methods, with tools updated as methods advance. Outputs include raster products, individual-tree and semantic segmentation, and tree- and stand-level metrics. Original point clouds and processing records are retained, enabling reprocessing with improved tools while preserving provenance. With broader coverage, curation, and validation, this shared resource could extend individual surveys into a basis for model evaluation and benchmarking, cross-site synthesis, calibration and validation of larger-scale Earth observation products, and macroecological analysis.

0.19

Three LiDARs, Twenty-Five Datasets: Cross-Source Generalization in Tree-Species Recognition

cs.CV cs.AIcs.GR ·2026-10-15 ·Jae Joong Lee, Bedrich Benes
publishedbenchmarkcode/data similarity 0.63
Abstract · Accepted to WACV 2027

FOR-species20K is the largest public LiDAR benchmark for tree-species classification, pooling 25 independently collected terrestrial, mobile, and airborne laser-scanning datasets across 33 species. We introduce a multi-resolution, multi-view ConvNeXtV2 model that improves official hidden-test accuracy from 79.5% to 85.0%, ranking first at the time of submission. We then examine what this score measures. Because the hidden test is species-balanced, its overall accuracy is more comparable to a macro metric than to accuracy under the public set's long-tailed distribution. Moreover, the official random split places every source dataset in both training and evaluation. A logistic probe recovers source identity from out-of-fold model probabilities with 69% accuracy, while geometric features identify the source above 90% within two widely shared species; 18 of the 33 species occur in only one source. Under a source-species-cell holdout, evaluated on 5,566 trees from eight eligible species that retain the same LiDAR-type training support in other sources, the unweighted species mean falls from 82% to 36%, and tree-weighted accuracy falls from 95% to 60%. Count-matched retraining and experiments with two alternative backbones indicate that this gap is not explained by reduced training support alone, while an external PureForest experiment shows a smaller but consistent grouped-split effect. These results establish the 85% leaderboard score as strong in-distribution performance, but not as an estimate of source-disjoint generalization, motivating balanced metrics and source-aware evaluation. The code is available at: https://github.com/JaeLee18/FOR20K-lidar-tree-species

0.38

Mapping Woody Vegetation from Multi-Source Imagery and Prediction Fusion for Enhanced Data Efficiency and Accuracy

cs.CV ·2026-08-26 ·Kal Backman, Jared Wood, Adam Roff
published similarity 0.63
Abstract · Published in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing

Tree cover maps are a fundamental remote sensing product, used to derive ecological insights about the landscape and are essential to change detection, vegetation mapping and fire monitoring programs. However, comprehensive tree cover mapping requires reliable and high-quality imagery, free of cloud and weather defects to ensure accurate model outputs. Deep learning approaches can generate high quality maps with minimal human intervention but require large amounts of human annotated data to be successful. In this work we propose a framework consisting of methods that aim to improve the data efficiency and robustness of deep learning models using data fusion techniques to segment woody vegetation defined as vegetation over the height of 2m across the state of New South Wales, Australia. To improve robustness against varying image quality, we propose an image composition method that normalizes the imagery and removes defects, whilst also minimizing the reliance on individual image quality by proposing a prediction fusion method. The two methods resulted in an error reduction of 38.2% and 53.6% respectively compared to single-source imagery. To address deep learning approaches' limitation of requiring large amounts of data, we apply label transfer to multiple sources of imagery as a form of data augmentation to improve data efficiency. Learning from multiple image sources was shown to be the biggest improvement in performance, resulting in an error reduction between 28.1% to 76.2% across the different validation experiments, whilst reducing the standard deviation of performance across image dates by a factor of 13.

0.38

ForestQuery: Boundary-Aware and Spatially Anchored Query Learning for Unified Forest Point Cloud Segmentation

cs.CV cs.AI ·2026-10-02 ·Zhihao Zhan, Le Tao, Yifei Tian, Xin Liu, Jie Yuan
code/data similarity 0.62
Abstract

Forest point cloud segmentation is fundamental for fine-grained 3D forest scene understanding, yet remains challenging due to irregular tree structures, severe occlusions, density variations, and ambiguous instance boundaries. Recent query-based forest segmentation methods have shown promise for unified semantic and instance prediction, but they still insufficiently exploit forest-specific spatial structure and account for boundary uncertainty. In this paper, we propose ForestQuery, a boundary-aware and spatially anchored query learning framework for unified forest point cloud segmentation. ForestQuery enhances instance and semantic query learning through two complementary designs. Specifically, boundary uncertainty is explicitly modeled to guide reliable instance query construction and modulate query optimization through adaptive loss reweighting. Meanwhile, spatially anchored semantic query enhancement (SA-SQE) introduces learnable 3D anchors encoding forest vertical stratification priors to enrich semantic queries with explicit spatial references. We evaluate ForestQuery on multiple public forest point cloud benchmarks and a self-collected annotated real-world dataset. Extensive experiments demonstrate consistent improvements in both individual-tree segmentation and semantic segmentation across diverse forest scenes. Code and data are publicly available at https://zhan994.github.io/ForestQuery

0.22