CS Paper Radar

Progressive-Observation Physical-Layer Fingerprinting for Efficient Open-Set Ethernet Authentication

Chenming Zhang, Jiaxiang Geng, Aiqun Hu, Azzedine Boukerche, Peng Sun

cs.CR cs.LGcs.NIeess.SP ·submitted 2026-10-27 23:43 UTC · v1

Abstract

Physical-layer fingerprinting (PLF) has emerged as a promising authentication approach for Internet of Things devices. However, most PLF systems acquire and process a fixed-length waveform for every authentication query, burdening resource-constrained edge nodes. To address this issue, we propose a progressive-observation PLF method that adapts the waveform length to each query. Specifically, a lightweight convolutional neural network (CNN) first rejects clearly unknown devices from a short observation. Spectral matching then accepts clearly registered devices from a slightly longer observation. Only ambiguous queries proceed to the same matching on the full-length waveform, reducing both data acquisition and computation. Because fingerprints drift across days, we also design an adaptive calibration algorithm to avoid retraining the CNN. The algorithm realigns the features and decision thresholds using a few current-day references from registered devices. We evaluate the method with 100BASE-TX Ethernet devices of two controller types on held-out days. Compared with fixed-length processing, it keeps the false rejection and false acceptance rates equal or lower for both controller types on both days. It also reduces the waveform data per query by 75.1% and the CPU processing time on a Raspberry Pi 5 by 73.7% on average. With the same monitoring bandwidth, an edge node can therefore serve about four times as many authentication queries.

Comment
6 pages, 5 figures, 2 tables. Submitted to IEEE ICC 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Physical-Layer Fingerprint-Space Capacity Analysis for 100BASE-TX Devices in IIoT

cs.CR eess.SP ·2026-08-27 ·Chenming Zhang, Aiqun Hu
unusual similarity 0.59
Abstract · 12 pages, 7 figures, 5 tables. Submitted to IEEE Internet of Things Journal

Industrial Internet of Things (IIoT) networks widely adopt Ethernet technologies, such as 100BASE-TX, for industrial communications. As industrial networks continue to scale, reliable device authentication becomes increasingly important for preventing device impersonation and unauthorized access. Physical-layer fingerprinting (PLF) exploits device-dependent fingerprint features in transmitted signals and provides a hardware-based approach for terminal authentication. However, the distinguishable space supported by 100BASE-TX physical-layer fingerprints and its capacity boundary remain largely unexplored. To analyze the capacity of physical-layer fingerprints, this paper proposes a nonlinear and impulse-response model (NAIM) that characterizes device-dependent waveform differences in 100BASE-TX transmitted waveforms. The nonlinear component captures steady-state level deviations, while the impulse-response component describes the transition response during level transitions. The 100BASE-TX transmitter waveform requirements, the observation resolution determined by noise and analog-to-digital conversion (ADC) quantization, and the target bit-error ratio (BER) constrain the admissible fingerprint space. Under the NAIM model, the fingerprint-space capacity of 100BASE-TX terminals is derived as approximately $2.96\times10^{10}$ distinguishable states. Experiments on signals collected from 48 NICs under two cable conditions estimate a Gaussian-equivalent empirical capacity from the measured inter-device and within-device variations. Under the 5-m cable condition, empirical capacity and closed-set identification consistently rank the three NIC models, and a larger empirical capacity yields higher identification accuracy. These results demonstrate that the proposed capacity analysis provides a pre-deployment assessment for physical-layer fingerprinting in IIoT.

0.50

Robust Lightweight IoT Device Fingerprinting Under Network Traffic Anomalies

cs.NI cs.LG ·2026-10-19 ·Roya Taheri, Shamik Sengupta
similarity 0.59
Abstract · 6 pages

Accurate IoT device identification is essential for network security, yet many existing approaches rely on payload inspection, feature engineering, or long observation windows that limit scalability and often assume stable network conditions despite the inherent variability of real-world IoT traffic. We propose a lightweight IoT device identification approach based on packet headers and locality-sensitive hashing (LSH), generating compact fingerprint representations at packet- and window-level granularities. To evaluate robustness, we consider packet-level traffic anomalies including drop, perturbation, reordering, duplication, and packet injection. Experimental results show that the proposed approach achieves up to 99% accuracy while maintaining robustness under realistic traffic distortions using short bounded observation windows. Anomalies affecting global traffic structure produce the largest performance degradation, whereas window-level representations improve robustness by reducing sensitivity to localized distortions. The low computational overhead of the proposed approach enables scalable IoT device identification in resource-constrained environments.

0.25

Adversarial RL for Port-Scan Evasion: Attacker Feature Visibility in Edge-Deployed IDS

cs.CR cs.LG ·2026-10-05 ·Logan Andrew North, Priya Sanjay Kaluskar, Shasi Kumar Ramachandran Prabhu, Peilong Li, Suman Saha
similarity 0.56
Abstract

Machine learning-based intrusion detection systems (IDS) are increasingly used in resource-constrained Internet of Things (IoT) environments, yet their robustness is often evaluated against static attacks rather than adversaries that adapt to detection feedback. This paper investigates adaptive port-scan evasion against ML-based IDS models deployed on a Raspberry Pi 3B+. We implement a live Zeek-based IDS pipeline with XGBoost, a multi-layer perceptron, and a 1D convolutional neural network trained on TON_IoT telemetry, and use a Deep Q-Network (DQN) adversary to learn evasive combinations of probe timing, TCP flags, and payload size under black-box, gray-box, and white-box feature-visibility settings. Although the deployed IDS models detect conventional port scans at 91.1--99.8%, DQN final-50-episode evasion rates range from 61.9% to 98.3% across feature-visibility settings. Greater feature visibility does not monotonically improve evasion, and its effect is model-dependent: against XGBoost, the black-box agent achieves 92.9% evasion, compared with 61.9% and 76.9% for gray-box and white-box agents, respectively, whereas 1D-CNN is most vulnerable under white-box access at 98.1%. Because standard DQN can overestimate action values, we additionally spot-check representative conditions using Double DQN. The gray-box condition remains unstable in this check, providing no evidence that overestimation bias alone explains the observed instability. These results show that limited feature knowledge can still enable effective adaptive evasion against static edge-deployed IDS models, motivating more robust defenses for IoT edge environments.

0.28

Local Order Matters: A Lightweight CPU-Trainable CNN for Website Fingerprinting on Defended Tor Traffic

cs.CR cs.AIcs.LG ·2026-11-15 ·Puyang Xu, Zhizhao Wen, Yifan Jiang, Chao Wang, Yusi Gong
similarity 0.56
Abstract · 5 pages, 1 figure. Conference paper submitted to the 11th International Conference on Computer and Information Processing Technology (ISCIPT…

Website fingerprinting (WF) attacks let a passive adversary infer which site a Tor user visits from the encrypted cell sequence. On undefended traffic, hand-crafted-feature attacks are already near-ceiling, so deep learning offers only a marginal advantage there. We show that the decisive regime is defended traffic: against the FRONT padding defense, which injects dummy cells that corrupt the volume and count features feature attacks rely on, a compact 95,103-parameter 1-D convolutional network trained on the raw cell-direction sequence, on CPU only, stays robust while three implemented direction-only feature baselines degrade. On the closed-world WFlib FRONT set (95 sites), our model reaches 54.2% top-1 accuracy versus 38.5% for the strongest implemented feature baseline (k-FP-style RF), a gain of 15.7 percentage points (3 seeds; seed-0 paired-bootstrap 95% CI [+14.5, +17.0] pp on per-trace correctness, excluding zero). On undefended traffic the CNN reaches 94.1% versus 92.3% for k-FP-style RF. A controlled order-ablation permutes only nonzero traffic cells within each trace, preserving direction counts, retained length, and trailing zero-padding positions while destroying traffic order. This collapses the CNN below every feature baseline (from 54.2% to 7.6%, a 46.6 pp drop), showing that the model depends strongly on order-derived information under FRONT.

0.45

Dataset and Experimental Testbed for Deep Learning-Based Bluetooth Device Fingerprinting

eess.SP cs.CR ·2026-10-30 ·Haytham Albousayri, Bechir Hamdaoui
similarity 0.54
Abstract · 6-page paper; accepted and presented at the Experimental Research on Networking (ERN 2026) workshop, part of 17th International Conference o…

AI-enabled wireless networks have emerged as vital components of future-generation wireless communication systems. Among various wireless architectures, Bluetooth Low Energy (BLE) networks have attracted significant research interest due to their widespread adoption and low cost. In these networks, deep learning (DL) models can be integrated directly into the physical-layer infrastructure to perform diverse tasks, including environment sensing, localization, radio frequency fingerprinting (RFFP), and signal denoising. While highly effective under their original training configurations, these DL models often fail significantly when deployed in unseen environments---such as different rooms, varying temperature conditions, or altered carrier frequencies. Addressing this limitation requires rigorous benchmarking of models and algorithms against unseen configurations to evaluate their generalization and robustness. To bridge this gap, this paper makes two key contributions: i) we introduce a comprehensive, large-scale wireless BLE dataset consisting of raw IQ transmissions from 31 distinct commercial devices captured across diverse days, locations, environments, temperatures, receiver hardware, and frequency channels; ii) we present a case study evaluating state-of-the-art techniques for domain-robust RFFP to advance real-world AI reliability.

0.28

Adaptive Traffic Camouflage: Causal and Resource-Aware Defense Against IoT Fingerprinting

cs.CR cs.NI ·2026-09-22 ·Daniel Adu Worae, Spyridon Mastorakis, Nuno Moniz, Nitesh V. Chawla
similarity 0.53
Abstract

Encryption hides IoT payloads, but traffic shape can still reveal device identity through packet sizes, timing, direction, and packetization. We present Adaptive Traffic Camouflage, a causal, leakage-aware controller that characterizes traffic-shape leakage without runtime device labels and selects a budget-feasible transformation for the next traffic window from previous-window context. The controller chooses among padding, packet splitting, timing, and composite transformations, or leaves traffic unchanged when camouflage is unnecessary. We evaluate the design on CIC-IoT-2022, IoT Sentinel, and UNSW using classical and sequence-based fingerprinting models under clean-trained, defense-aware, and incremental-exposure settings, with fixed, random, and mean-bandwidth-matched baselines. Under the Balanced profile, camouflage reduces mean Macro-F1 by 13.2-23.3% relative to clean traffic with 4.88-7.47% average bandwidth overhead and at most 0.64 ms added latency. Under the larger Privacy profile, the reduction increases to 28.0-43.5%. Defense-aware training recovers much of the lost attacker performance on CIC-IoT-2022 and UNSW, while IoT Sentinel retains a substantial privacy gap. A non-causal same-window reference provides only modest additional benefit over previous-window control, and metadata-rich attackers remain effective outside the targeted traffic-shape surface. These results show that causal, resource-aware camouflage can reduce IoT traffic-shape fingerprintability under explicit communication constraints, while the persistence of protection depends on how readily the defended distribution can be learned.

0.35

FedSwitch: Federated Region Classification From Wireless Channel Measurements

eess.SP ·2026-10-02 ·Mattia Piana, Stefano Rini, Stefano Tomasin
similarity 0.53
Abstract

Wireless Internet-of-Things (IoT) networks can leverage locally observed channel state information (CSI) at base-stations (BSs) to perform region classification, i.e., infer the region of origin of a transmitter (TX), thereby enabling channel-based authentication. However, centralizing these measurements incurs substantial communication overhead and requires sharing location-dependent radio fingerprints. To address these difficulties, we propose an edge-native federated learning (FL) framework where BSs collaboratively train a shared classifier via a parameter server (PS) without exposing raw data, thereby supporting physical-layer security tasks like spoofing detection. To overcome the statistical heterogeneity arising from diverse BS locations and propagation conditions, we introduce FedSwitch, a personalized FL algorithm that automatically transitions edge nodes from collaborative training to local fine-tuning upon loss stagnation. We provide theoretical convergence guarantees for the proposed collaborative training phase and derive analytical bounds linking classification errors to statistical discrepancies. Extensive evaluations on synthetic channel measurements demonstrate that FedSwitch significantly improves region-classification accuracy over standard FL baselines.

0.17

RepTC: Representation-Aware Optimization for Efficient Traffic Classification on Edge IoT Devices

cs.NI cs.LG ·2026-10-03 ·Adel Chehade, Edoardo Ragusa, Paolo Gastaldo, Rodolfo Zunino
similarity 0.53
Abstract · 17 pages, 10 figures, 13 tables

Traffic classification (TC) is crucial to secure Internet of Things (IoT) networks, whose edge nodes often operate under privacy, bandwidth, and energy constraints. Yet, encrypted payloads and limited computing power make accurate, real-time TC a challenging task. Existing learning-based TC approaches often fix the input configuration a priori, even though it directly influences both predictive performance and computational cost. This paper presents RepTC, a representation-aware hardware-constrained strategy that addresses session-level TC through joint model and input optimization. The method co-optimizes network architecture, session length, and header preprocessing; this enables joint control of model complexity, input scale, and data representation within a unified resource-constrained design space. The proposed approach enforces microcontroller-class constraints on memory, model size, and computation, and yields compact models deployable on low-power edge devices. A gateway monitors traffic by aggregating sessions and either performs inference locally or offloads to a low-power edge node. Both scenarios are validated on heterogeneous embedded hardware, including a Raspberry Pi 3B+, STM32 Nucleo-F401RE, and XIAO ESP32-C3, spanning Cortex-A, Cortex-M, and RISC-V processor architectures; measured inference latency ranges from 0.63 to 18.59 ms, with MCU-side inference energy between 0.50 and 1.41 mJ per session. RepTC yields configurations that achieve high accuracy on a variety of established benchmarks: 96.21% on ISCX VPN-nonVPN, 99.62% on USTC-TFC2016, and 99.97% on Edge-IIoTset; at the same time, model size and computational requirements were reduced by up to three orders of magnitude compared with state-of-the-art methods. The results show that representation-aware optimization can improve efficiency while preserving competitive classification performance.

0.16