CS Paper Radar

From Natural Language to Real Schematics: An Automated Workflow for Power Electronics Schematic Synthesis

Bowen Su, Huan Chen, Jiahua Ying, Ran Ou, Weilong Chen, Li Xue, Kai Sun

cs.AI ·submitted 2026-10-28 02:52 UTC · v1

Abstract

Designing power electronics converters traditionally requires intensive human expertise across topology sizing, commercial component selection, circuit simulation verification, and schematic drafting. While Large Language Models (LLMs) show promise in electronic design automation (EDA), applying standalone LLMs directly to board-level power electronics schematic synthesis suffers from severe engineering hallucinations, including inaccurate analytical sizing, fabricated or mismatched component part numbers, violated voltage derating margins, and broken topological connectivity. In this paper, we propose a Bounded Dual-Loop Automated Schematic Synthesis Framework that translates natural language specifications into verified, editable KiCad schematics and manufacturing deliverables. Our workflow integrates six stages across three functional columns: (1) requirement parsing and knowledge-driven power stage synthesis covering non-isolated (Buck, Boost) and isolated/resonant (Flyback, DAB, half-bridge LLC) topologies; (2) contract- and evidence-coordinated component selection grounded in distributor APIs and OEM datasheets, coupled with closed-loop ngspice transient verification and stress feedback; and (3) modular control hardware integration and multi-format deliverable generation featuring native KiCad netlist round-trip verification. End-to-end case studies on a 24-36V to 12V,2A Buck converter (29 positions, 83 verified terminals) and an isolated 48V to 24V, 0.5A, Dual-Active Bridge (DAB) converter (87 positions, 341 verified terminals), alongside comparative evaluations against a Vanilla LLM baseline, demonstrate that our framework improves component verification coverage from 22.2 to 98.6, nominal value consistency from 0 to 97.7, and SPICE simulation pass rates from 0 to 100.

Closest papers

Nearest neighbours by meaning across the whole index.

OpenLayout: An Open and Agentic-Driven Platform for Holistic VLSI Physical Design and Benchmarking

cs.AR ·2026-11-13 ·Qiufeng Li, Sizhe Tang, Quan Cheng, Zirui Wang, Wantong Li +2 more
publishedbenchmarkpositioncode/data similarity 0.69
Abstract · Accepted by ICCAD2026

Physical design automation of very large-scale integrated circuits (VLSI) has made significant strides, progressing from single-stage placement and routing toward increasingly integrated full-flow implementation. Yet, existing approaches struggle with the vast design space optimization (DSO) arising from diverse technology nodes, circuit designs, and varied constraints. The substantial runtime of physical-design tools further exacerbates this challenge, leaving industrial workflows heavily dependent on experienced engineers to navigate the design space and achieve power, performance, and area (PPA) targets, incurring significant engineering effort. We argue that large language models (LLMs) with strong reasoning capabilities, enriched with distilled human design expertise, offer a promising path toward efficient and automated DSO. Unlike traditional algorithms, LLMs can interpret complex design contexts and naturally incorporate human expertise expressed in natural language for reasoning, acting, observing, and adapting throughout the design process, a capability that conventional optimization methods cannot exploit. To this end, we present OpenLayout, an agentic platform that leverages multi-agent collaboration with embedded design knowledge to enable self-iterative DSO. We further introduce OpenLayout-Bench, a benchmark targeting advanced technology nodes with commercial EDA tools to systematically evaluate physical design automation capabilities of LLMs. Experimental results demonstrate that OpenLayout achieves state-of-the-art performance, with approximately 20% accuracy improvement over baseline methods. Our work is open-sourced at https://github.com/fenggev56/OpenLayout

0.44

AaLLM: An End-to-End Analog Circuit Design Framework from Topology Generation to Sizing Using Large Language Models

eess.SY cs.AI ·2026-08-13 ·Mohammed Ayman Habib, Rylan Hart, Morteza Fayazi
code/data similarity 0.67
Abstract

Analog circuit design is a time-consuming, iterative process in a nonlinear and high-dimensional design space that relies heavily on expert intuition. Among recent developments, LLMs have introduced a promising approach by bringing natural language reasoning to circuit design tasks. The majority of conventional LLM-based approaches provide fragmented solutions that focus either only on sizing or topology generation. These methods require adding specific technical knowledge manually, which is inefficient and prone to hallucinations during circuit sizing. Moreover, the inherent trade-off in meeting different specs makes current approaches iterative and tedious. Another shortcoming is the inability to create innovative topologies, which may lead to sub-optimal designs due to reliance on conventional topologies. In this paper, we present AaLLM, an open-source end-to-end multi-agent LLM workflow that takes user specs as input and outputs the appropriate netlist, encompassing both topology generation and circuit sizing. AaLLM automates the creation of a relevant knowledge base from research papers and textbooks to combat tedious manual data collection. A RAG model is implemented to emulate circuit design expertise using this knowledge base. Moreover, AaLLM uses a novel tri-agent feedback system comprising a Designer that determines circuit component values, a Critic that scrutinizes these values, and an Evaluator that minimizes circuit sizing iterations by arbitrating between the other two agents. AaLLM-generated novel topologies achieve a figure of merit (FoM) comparable to that of known topologies, and up to 3x higher for certain circuits. Testing on several circuit topologies, our results show a 3x - 4.5x decrease in the number of SPICE calls at inference when compared to SOTA multi-agent LLM pipelines. The results also show a 40x decrease in wall-clock time compared to existing approaches.

0.50

LLM-enabled Behavior Driven Development Workflow for Formally Verified Hardware Designs

cs.AR cs.SE ·2026-09-14 ·Luca Müller, Qian Liu, Rolf Drechsler
similarity 0.62
Abstract

Recently, the use of Large Language Models (LLMs) for different tasks in the Electronic Design Automation (EDA) life-cycle has been studied extensively, but an integrated view is lacking. Specifications are the foundation of this life-cycle, but they suffer from ambiguity when written in natural language, which especially affects the quality of LLM output. Formal specifications mitigate these ambiguities, but they come with their own challenges. On the other hand, Controlled Natural Language (CNL) specifications can serve as a middle-ground, reducing ambiguity while retaining interpretability. In this work, we propose an integrated view on the use of LLMs for EDA and establish an LLM-enabled behavior driven hardware development workflow. We introduce and define Formal Verification Gherkin Scenarios (FV Gherkin Scenarios), unlocking CNL specifications as the foundation for formally verified hardware designs via Formal Property Verification (FPV). Experimental evaluation shows that our workflow is able to outperform other established LLM-based methods by 2.48x in functional correctness of generated Register Transfer Level (RTL) designs and by 2.54x in formal coverage of generated assertions for FPV.

0.07

ICLayout-Bench: Benchmarking LLM Agents for Custom Circuit Layout Design

cs.AR cs.AIcs.SE ·2026-11-08 ·Zhangmai Li, Tianrui Ma, Zheng Weng, Mo Zou, Zidong Du +6 more
benchmarkcode/data similarity 0.62
Abstract · 12 pages, 7 figures, 3 tables, including appendices. Project page: https://lizhangmai.github.io/ICLayout-Bench Code: https://github.com/lizh…

Large language model (LLM) agents are being explored for circuit design, but their ability to produce high-quality custom layouts has not been extensively evaluated. ICLayout-Bench is a benchmark in which agents use electronic design automation (EDA) tools to construct and optimize GDSII layouts from transistor-level circuit netlists. These layouts are evaluated using physical verification, parasitic extraction, and post-layout simulation. Layouts that pass the physical and functional checks are scored on electrical performance and area. The benchmark includes 165 tasks across 13 process design kits (PDKs), covering technology nodes from 3 nm to 180 nm. The tasks span analog, mixed-signal, and digital circuits in open-source and commercial EDA flows. The experiments evaluate 22 configurations spanning seven models on 21 public and 19 private tasks. Mean layout scores range from 4.22 to 80.26 on public tasks and from 1.43 to 67.01 on private tasks, on a 100-point scale. Higher reasoning effort does not consistently improve mean scores, and configurations with comparable scores can incur substantially different model costs.

0.43

PCBnet: A Dataset and Automatic Construction of SPICE Netlists from Schematic Images

cs.CV cs.AI ·2026-08-28 ·Zhen Huang, Yuhao Gao, Yuzhi Liu, Daian Cheng, Chengyuan Shao +13 more
publishedbenchmarkdataset similarity 0.60
Abstract · Accepted at the 2026 IEEE International Conference on LLM-Aided Design (ICLAD 2026)

Printed circuit boards (PCBs) are fundamental to modern electronic systems, yet AI-driven PCB design automation remains constrained by the lack of large-scale paired schematic-netlist datasets. PCB schematics are particularly challenging due to diverse component types, complex wiring topologies, and noisy textual annotations. To address this gap, we present PCBnet, a large-scale PCB schematic dataset comprising over 300 real-world designs with annotated pins and paired SPICE netlists. It contains more than 50,000 component instances, 150,000 wires, 100,000 text regions, and 400,000 characters. We further develop an automated schematic-to-netlist pipeline that combines visual recognition, topology construction, and domain-knowledge-guided multi-agent correction. The proposed method achieves 94.54% component detection mAP, 98.57% text recognition accuracy, and 84.47% end-to-end connectivity accuracy. PCBnet provides a benchmark and data foundation for future AI-driven PCB design automation.

0.30

LLM-Driven, Datasheet-Aware Automated Hardware Compatibility Verification for Early-Stage, Pre-Schematic Embedded System Design

cs.AI eess.SY ·2026-08-25 ·Haotian Qiao, Robert P. Dick
similarity 0.60
Abstract

We present an LLM-driven, datasheet-aware framework for early-stage hardware compatibility verification that identifies documentation-level interface incompatibilities based on hardware datasheets and high-level component connectivity descriptions. It does not require, and can therefore be used, before detailed schematic simulation and implementation. We view trustworthy LLM-assisted design automation not as directly generating answers from documents, but as transforming engineering information through traceable verification stages. Given hardware datasheets and high-level component connectivity descriptions, the framework constructs a design graph that captures device connectivity and shared interaction domains, retrieves only the engineering properties required by explicit, domain-oriented verification criteria , and generates deterministic scripts for compatibility evaluation. By decomposing compatibility analysis into modular stages and preserving intermediate results, the framework reduces context overhead, improves transparency and tractability, enables scaling, and avoids reliance on LLMs for numerical computation. Evaluated on seven embedded-system designs comprising 34 datasheets, our framework achieves 97.5% compatibility-verification accuracy and an 8.6 times reduction in input context size compared with ``upload-and-query'' workflows. These results demonstrate the feasibility of LLM-assisted, specification-based hardware compatibility verification at an early design stage, as well as the need for, and substantial benefits of, modular task decomposition, formalized verification criteria, and task-aware compact context construction.

0.40

VHDLBench: Benchmarking and Fine-Tuning Large Language Models for VHDL-Based Chip Design

cs.AR cs.AI ·2026-10-19 ·Patrik Drazic, Benaoumeur Senouci, Boualem Benatallah
publishedcode/data similarity 0.60
Abstract · This paper is a long version of a paper accepted for the 4th International Conference on Foundation and Large Language Models, 2026

The rapid evolution of digital circuit complexity demands innovative approaches to hardware design automation. While Large Language Models (LLMs) have influenced software development, their application to Hardware Description Language (HDL) generation remains largely unexplored, particularly for VHDL. This paper presents a comprehensive study for AI-assisted digital circuit design, addressing gaps in current Electronic Design Automation workflows. The work introduces a VHDL dataset of 18,500+ syntax-verified examples from open-source repositories and converted Verilog designs. Five 7B-parameter LLMs were fine-tuned using parameter-efficient QLoRA technique, enabling deployment in resource-constrained environments. To evaluate model efficacy, a rigorous three-level pipeline was established: (1) syntax and synthesis validation, (2) functional simulation with testbenches, and (3) FPGA prototyping on Zynq SoCs. Results show fine-tuned models achieve up to 92% syntax correctness and 73% functional accuracy on common design tasks, with DeepSeek-Coder demonstrating the highest performance gains. Generated designs were successfully deployed on real hardware, confirming not only syntactic but operational viability. This work demonstrates that LLMs, when tailored with domain-specific data and lightweight fine-tuning can contribute meaningfully to the future of generative EDA workflows.

0.25

Analog-DB: An Agent-First Analog Integrated Circuit Database, From Blocks to Systems

cs.AI cs.AReess.SP ·2026-09-01 ·Danial Noori Zadeh, Mohamed B. Elamien
code/data similarity 0.60
Abstract · 23 pages, 5 figures, and 13 tables

Sharing analog integrated circuit designs remains difficult: foundry non-disclosure agreements restrict the process details a design depends on, and the testbenches behind published results are rarely released. We present analog-db, an open-source, versioned database built on a shareable design representation. A domain-specific language captures each design as a process-neutral topology, reusable testbenches, and a machine-readable datasheet under one schema, so a design is shared in full and re-simulates on the process kits it is bound to. A parameterization scheme exposes functional sub-blocks and device sizes as named parameters that carry their matching constraints, making circuits composable and retargetable; a schema-governed contract and queryable catalog let AI design agents discover and reuse them directly. Across the regulator corpus, all 23 circuit-kit bindings on three open kits meet their own recorded specification bands (typical corner, matched devices, no layout) and 10 of 23 meet a common class band. Seventeen of the 23 imported sizings failed their testbenches and closed under a gm/ID sizing loop driven by the annotated sub-block roles, typically within one to three iterations. In a supervised case study, a coding agent working from the released artifacts sized the op-amp cores of a chopper instrumentation amplifier on an open 130nm kit, locating four hand-entry defects and a missing common-mode feedback loop that the sizing-only baseline did not repair. The database holds 68 circuits across sixteen classes, verifiable at schematic level under a tiered harness and tracked on a power/performance scoreboard, released at https://github.com/MacAnalog/spicexplorer-release.

0.54