CS Paper Radar

CuraEval: Evaluating Demonstration Curation on Mixed-Skill Robot Data

Jiuyi Xu, Meida Chen, Yang Ye, Yangming Shi

cs.RO cs.AI ·submitted 2026-10-28 03:19 UTC · v1
code/data

Abstract

Robot imitation learning uses demonstrations from operators of varying skill, but selecting training data remains challenging. Existing methods score demonstrations using smoothness, diversity, or estimated influence on policy performance, but differences in selection and evaluation protocols make it difficult to determine whether they outperform simple baselines. We introduce \textbf{CuraEval}, a framework combining mathematical analysis of demonstration scores with controlled comparisons against fixed size-matched random subsets and full-data training on mixed-skill robomimic data using Diffusion Policy and BC-RNN. We show that the evaluated PSD score depends only on episode length and squared position magnitudes, and produces nearly the same ranking as episode length on \textit{square} ($ρ=0.999$). With Diffusion Policy, selecting the shortest 50\% of demonstrations improves \textit{square} success from 70.7\% under random selection to 76.5\%. Compared with random selection, our adapted geometric-entropy LOO selector reduces success at 25\% retention from 94.7\% to 74.0\% on \textit{can} and achieves 41.7\% on \textit{square}, below the mean success rates of all three independently sampled random subsets (59.8--62.5\%). On the same 3 \textit{square} Diffusion Policy training seeds, length-based selection at 75\% retention improves success over full-data training from 76.7\% to 86.7\% under the original protocol, but lowers it from 80.5\% to 79.5\% after checkpoint reporting, rollout count, and evaluation seed change jointly. No evaluated curated condition significantly outperforms full-data training after Holm correction, although confidence intervals still permit useful gains. Code is available at https://github.com/jiuyixu25/CuraEval.

Comment
Accepted by the CoRL 2026 Workshop "Oops, I Erred". 10 pages, 2 figures, 2 tables

Closest papers

Nearest neighbours by meaning across the whole index.

SynIL: Leveraging Synergy for Offline Imitation Learning from Imperfect Demonstration Datasets

cs.RO cs.AI ·2026-09-28 ·Yuto Tanaka, Kyo Kutsuzawa, Martina Doku, Dai Owaki, Mitsuhiro Hayashibe
similarity 0.71
Abstract

Imitation learning enables robots to acquire complex skills directly from massive demonstration datasets, but its performance degrades severely when datasets are contaminated with suboptimal or noisy demonstrations. While prior quality-assessment methods attempt to filter or reweight data, they typically rely on manual pre-selection of expert reference data or task-specific heuristics, limiting scalability. To address this challenge, we introduce SynIL (Synergy-based Imitation Learning), a novel framework for automated, label-free demonstration quality assessment in offline reinforcement learning. Grounded in neuroscientific evidence that motor synergy, a low-dimensional coordinated structure in movement, correlates directly with motor proficiency, SynIL algorithmically quantifies synergy manifestation to generate dense, transition-level reward signals via self-supervised reward regression. Comprehensive evaluations on D4RL locomotion benchmarks and multi-human Robomimic manipulation datasets demonstrate that synergy-derived rewards correlate strongly with ground-truth rewards. Furthermore, SynIL substantially outperforms Behavior Cloning (BC) and achieves performance comparable to, and in sparse-reward human teleoperation scenarios, superior to, offline reinforcement learning trained on true environment rewards.

0.24

DiscoDemo: Discovering Efficient and Diverse Robot Demonstrations for Imitation Learning

cs.RO ·2026-10-23 ·Minho Park, Kinam Kim, Donghu Kim, Byungkun Lee, Dongyoon Hwang +4 more
code/data similarity 0.71
Abstract

Behavior cloning for robotic manipulation is highly sensitive to the coverage of its training data, yet collecting diverse successful demonstrations remains costly. We study reinforcement learning (RL) not as a deployable controller, but as a data generator for downstream visuomotor imitation learning. Our key premise is that multiple successful solution modes cover a broader range of successful trajectories than repeatedly collecting a single narrow solution. We introduce DiscoDemo, which trains a privileged latent-conditioned RL generator with a parallel reverse curriculum and a success-gated diversity objective to discover diverse solutions while preserving task success. The trained generator produces multiple successful closed-loop behaviors, which are safety-filtered and exported as a static dataset for downstream imitation learning. Across four manipulation tasks, DiscoDemo produces broader successful-state coverage and improves downstream visuomotor policies in both simulation and the real world. Averaged across tasks, downstream success increases to 62% from 40% for the strongest baseline in simulation, and to 78% from 39% on the real robot, respectively. These results suggest that successful solution diversity improves imitation learning for a pretrained flow-matching VLA and remains complementary to corrective data collection. Project page: https://davian-robotics.github.io/DiscoDemo

0.33

Mulligan: Performance-Guided Data Collection for Efficient On-Robot Learning

cs.RO cs.LG ·2026-10-05 ·Lars Ankile, Perry Dong, Rohan Bhowmik, Aneesh Muppidi, David D. Yuan +2 more
code/data similarity 0.69
Abstract · Project page: https://mulligan.page/

Learning from human demonstrations is a reliable way to teach robots new tasks, but the gains from each additional demonstration shrink as the policy improves. Continued improvement can instead come from supervised deployment, where an operator places the objects and intervenes when the policy fails. We ask how to maximize improvement from a fixed budget of supervised episodes on high-precision manipulation tasks with wide ranges of object placements. We observe that failures can concentrate in a small subset of initial states, so uniform collection spends much of the operator's time on states the policy already handles. Mulligan makes the initial-state distribution a decision, starting each round's episodes at observed failures and untried states. To further improve data efficiency, we augment interactive imitation learning with a value function trained on all data, including failures that imitation discards. Across three real-world tasks evaluated on 2,550 held-out, blinded episodes and two simulated tasks, Mulligan outperforms uniform initial-state sampling at matched collection budgets, and combined with value-based action selection, HiL-IDQL+Mulligan, improves final real-task success by 10-34 percentage points. With operator interventions, the human-robot team completes 98% of collection episodes, remaining productive while the policy learns. Videos, code, and data are available at https://mulligan.page/.

0.29

Smoothness Ranks Skill, Not Success: An Audit of Published Trajectory-Smoothness Curation Metrics Under Episode-Length Controls

cs.RO ·2026-10-12 ·Jaiveer Bassi
publishedcode/data similarity 0.68
Abstract · 13 pages, 4 figures. Accepted (poster) at the NeurIPS 2026 RoboPAD Workshop. Code: https://github.com/imjbassi/smoothness-metric-audit

Trajectory smoothness has been proposed as a cheap, training-free signal for curating imitation-learning demonstrations, most recently by rinse, which introduces Spectral Arc Length (SAL) and a contact-aware Trajectory-Envelope Distance (TED). We test whether these published metrics survive episode-length controls on real robomimic data. On can/mh, SAL separates better from worse operators with AUROC 0.952, but episode length alone achieves 0.957, and inside a duration-matched band SAL falls to 0.628 while raw mean jerk, the baseline rinse argues against, rises to 0.896. The confound replicates on square/mh. On can/mg, where every episode is exactly 150 steps, SAL is at chance (0.454) and TED is inverted (0.376) against task success, while jerk reaches 0.706. Training GMM behavior-cloning policies on each metric's curated subset (10 seeds), curating by TED costs roughly a third of downstream success relative to random selection of the same size (0.240 vs. 0.360, p=0.0001, surviving Bonferroni correction), while SAL and jerk are indistinguishable from not curating. Under a diffusion policy TED still ranks worst, though its deficit is not resolvable at five seeds, and jerk becomes significantly better than both baselines, so the curation decision does not transfer unchanged across the two policy configurations we tested. Inspecting trajectories shows why TED inverts: successful manipulation requires sustained high-deviation motion through contact, while failure is low-amplitude hovering that a smoothed envelope follows closely.

0.50

TUCO: Curating Simulation Demonstrations for Sim-to-Real Robot Policy Co-Training

cs.RO ·2026-10-04 ·Ning Zhu, Mengfei Zhao, Yikai Tang, Zhangyujie Sun, Peihao Li +3 more
similarity 0.68
Abstract · 28 pages

Simulation demonstrations can supplement scarce real-world data for robot policy co-training. However, the value of using data curation to actively select these demonstrations for sim-to-real co-training remains underexplored. Existing curation methods also lack a unified criterion for measuring trajectory-level utility and set-level coverage from closed-loop target behavior. To address these gaps, we present the first systematic study of data curation for sim-to-real robot policy co-training and propose Trajectory-level Utility and set-level Coverage Optimization (TUCO). TUCO uses influence functions to trace how each source demonstration affects target-domain scoring rollouts. Our key insight is that these effects can be decomposed into an overall contribution to target return and variation across rollouts, providing a common closed-loop basis for measuring trajectory utility and set coverage. We further propose a performance-aligned subset optimizer that combines these measures in a unified curation objective to reduce redundancy and select complementary demonstrations. Extensive experiments on RoboMimic and OmniReset establish the value of active simulation data curation for sim-to-real policy co-training and show that TUCO achieves state-of-the-art performance across single-simulator, sim-to-sim, and sim-to-real settings.

0.28

DSD: Learning Diverse and Reusable Motor Skills via Diffusion Skill Discovery

cs.LG cs.GR ·2026-09-15 ·Sun Woo Kim, Xue Bin Peng
similarity 0.68
Abstract

Humans efficiently learn new tasks by reusing a rich repertoire of motor skills across different goals and contexts. A similar strategy can also be used to enable simulated characters to efficiently perform new tasks by leveraging reusable motor skills. To support a wide range of downstream tasks, the learned repertoire should be diverse, consisting of distinct behaviors as well as spatial and temporal variation within each behavior. A commonly used method for learning diverse skills is by maximizing the mutual information between skill latents and the states produced by a policy. The marginal state entropy promotes broad behavioral coverage, while the conditional entropy encourages consistent behaviors from each latent. However, directly estimating the marginal state entropy is intractable in high-dimensional control problems. Prior methods therefore rely on indirect latent-space approximations or coarse estimators of the state distribution. These approximations may not effectively promote broad coverage of the state space, resulting in skills with limited behavioral diversity and reduced utility for downstream tasks. In this work, we propose Diffusion Skill Discovery (DSD), a skill discovery method that uses a diffusion model to approximate the entropy gradient of the policy-induced state distribution through score matching. The resulting objective encourages the discovery of skills that produce a broader range of behaviors for high-dimensional humanoid control. The learned skills are reused in two downstream control settings: hierarchical control with a task-specific high-level policy and zero-shot control through latent selection from offline trajectories. Our experiments show that DSD discovers a broader repertoire of reusable motor skills than prior skill discovery methods, leading to the emergence of complex and agile behaviors that can be reused across downstream tasks.

0.29

RoboFFT: Finetuning generative robot policy via online reinforcement learning with forward process

cs.RO ·2026-09-26 ·Yu Li, Shenghe Hu, Yuhan Wang, Yaoxiang Pu, Haotong Zhang +2 more
published similarity 0.68
Abstract · Accepted by CoRL2026. Project Website: https://student-of-holmes.github.io/RoboFFT/

Generative models, such as diffusion and flow-based models, have shown strong promise for robot policy learning by capturing complex and multimodal action distributions from demonstrations. However, policies trained solely with imitation learning often suffer from imperfect demonstrations and distributional shifts, while further improvement typically requires additional expert data. Reinforcement learning offers a natural solution through environment interaction, but effectively finetuning generative robot policies remains challenging due to the intractability of likelihood estimation. In this work, we propose RoboFFT, a forward-process reinforcement learning framework for finetuning generative robot policies, which applies forward noising to sampled actions and uses the weighted score / flow matching loss to construct a surrogate policy ratio for PPO-style updates. We evaluate RoboFFT with popular generative robot policies on representative simulation benchmarks, including long-horizon planning and sparse reward settings. Extensive experiments and analysis demonstrate that RoboFFT consistently improves performance while achieving better stability and training efficiency. We further integrate RoboFFT into a real world RL framework and demonstrate its effectiveness in real world tasks. Project website: https://student-of-holmes.github.io/RoboFFT/.

0.34

The Relative Value of Demonstration Data: Execution Time Limits and Operator Mixtures in Behavior Cloning

cs.RO cs.LG ·2026-11-09 ·Jiaxuan Guo, Xingyu Ren, Youran Sun, Jingxin Yang, Kejia Zhang +1 more
similarity 0.67
Abstract

Robot demonstration datasets combine demonstrations from teleoperators of uneven experience, so collection teams need to know how many demonstrations from one group match those from another. We measure this with a data multiple: the ratio of the numbers of demonstrations two groups need for their policies to reach the same success rate. On robomimic's simulated Square and Can tasks, we train behavior-cloning policies on demonstrations from the two teleoperators robomimic labels Better and the two it labels Worse, varying dataset size and the share of Worse demonstrations. On Square, within robomimic's 25-second time limit, an all-Worse training set needs 1.55 times as many demonstrations as an all-Better set. Most of this difference is late completion: policies trained on Worse demonstrations finish later, as the Worse teleoperators do, and with a 100-second limit the multiple falls to 1.11. On Can, most of the difference remains at 100 seconds. If each Worse demonstration were worth 1/1.55 of a Better one, as in an all-Worse set, a half-Better, half-Worse set on Square would need 1.22 times as many demonstrations as an all-Better set. In fact, it needs 13% more than that, and this excess persists at every time limit from 20 to 200 seconds. The excess remains when training draws demonstrations uniformly instead of in proportion to their length. On Square, within the 25-second limit, switching to these Worse teleoperators is cheaper at equal success only if they earn less than a third of the Better teleoperators' hourly pay, because Worse demonstrations also take longer to record.

0.11