CS Paper Radar

Volley3D: Unified 3D Full-Sequence Reconstruction from Monocular Broadcasts

Noâm Boussouf, Adrien Maglo, Mohamed Chaouch, Hideo Saito

cs.CV ·submitted 2026-10-28 06:56 UTC · v1

Abstract

3D reconstruction from single-view sports broadcast is a pivotal capability for automated analytics and immersive AR/VR replays, yet notoriously ill-posed due to difficult-to-calibrate moving cameras and depth ambiguity. Unlike widely studied racket sports, team sports such as volleyball feature unpredictable multi-contact sequences and high altitude jumps. These dynamics categorically invalidate the standard planar projection assumptions relied upon by existing methods. To resolve these limitations without 3D training supervision, we propose a complete, physics-grounded pipeline tailored to monocular broadcast volleyball. First, we include a correction module to the perspective drift induced by ground-plane projection by coupling temporal jump spotting with Newtonian interpolation for 3D player placement. Second, for 3D ball trajectory estimation, we design a dedicated sub-trajectory segmentation architecture alongside a collision-matching algorithm. By anchoring physical equations to reconstructed 3D hand vertices, we lift noisy ball 2D detections into a spatiotemporally coherent 3D scene. Evaluations on multi-camera benchmarks demonstrate our approach significantly reduces 3D spatial drift compared to 2D-reprojection baselines.

Comment
8 pages + 10 pages of supplementary. Videos available on the project webpage: noambsf.github.io/Volley3D

Closest papers

Nearest neighbours by meaning across the whole index.

TAPVid-MV: A Benchmark for Tracking Any Point in 3D Across Multiple Views

cs.CV ·2026-09-01 ·Skanda Koppula, Frano Rajic, Abdullah Faiz Ur Rahman, Yi Yang, Ignacio Rocco +7 more
benchmarkcode/data similarity 0.70
Abstract

Multi-camera systems are increasingly practical for robotics, AR/VR, and autonomous driving because complementary views reduce depth ambiguity and preserve visibility under occlusion. Existing point-tracking benchmarks, however, focus on a single video or static multi-camera rigs. None test long-term 3D point tracking across several synchronized views under camera motion. We introduce TAPVid-MV (Tracking Any Point in Video across Multiple Views), the first benchmark for this setting. It contains a curated set of 238 sequences, 1,004 calibrated camera streams, and 74,147 point tracks across seven subsets spanning indoor and outdoor domains, from robotics and human activity to driving and synthetic procedural scenes. We obtain these trajectories using dataset-specific auxiliary modalities: sensor depth, LiDAR, SLAM and SfM points, human meshes, posed object meshes, and simulation. Every sequence and trajectory is visually verified by human annotators. Across more than 30 baselines, no method comes close to solving the task. Surprisingly, existing multi-view point trackers do not consistently outperform monocular point trackers. By evaluating reconstruction and point tracking on the same datasets, TAPVid-MV helps distinguish errors in recovered geometry from errors in point correspondence. Through this joint analysis, we identify geometry recovery as a major bottleneck for accurate 3D point tracking. Beyond multi-view 3D point tracking, our released annotations support monocular 2D and 3D point tracking, future-trajectory prediction, and 4D reconstruction. Project page: https://tapvidmv.github.io/

0.46

Field Converter: Geometry-Initialized Temporal Residual Refinement for World-Grounded Player Pose Estimation from Soccer Broadcasts

cs.CV ·2026-09-09 ·Simon Khan, Laurent Gajny, Jennyfer Lecompte, Sébastien Laporte
code/data similarity 0.70
Abstract · 11 pages, 5 figures. Code available at https://github.com/KhanSimon/field_converter

Recovering 3D human pose from monocular sports broadcasts remains challenging when players must be localized in a shared metric world coordinate system rather than only reconstructed relative to their own body. We introduce Field Converter, a geometry-initialized temporal residual framework for world-grounded 3D player pose estimation from calibrated soccer broadcasts. Our method first uses camera and pitch geometry to initialize the player root through ray-ground intersection, then predicts a temporal residual correction from pose, image, camera, and geometric cues. On match-disjoint evaluation sequences, residual refinement reduces root error from 49cm with geometry alone to 14cm with a frame-wise MLP and 10cm with a TCN, while a Transformer achieves a comparable 11cm. The resulting world-space MPJPE reaches 13.2cm, and ablations show that residual prediction clearly outperforms direct global-root regression while temporal context matters more than the specific temporal backbone. Failure analysis further identifies airborne motion as the main limitation of the ground-based geometric initialization.

0.37

PVDepth: Panoramic Video Depth Estimation via Geometry-Aware Spatiotemporal Adaptation

cs.CV ·2026-11-05 ·Chuanxin Song, Peixi Peng
publishedcode/data similarity 0.69
Abstract · ICML 2026, Project Page: https://chuanxinsong.github.io/pvdepth-project-page

Panoramic video depth estimation is pivotal for applications such as Virtual Reality and World Models. However, advancements in this field are impeded by two primary obstacles: the scarcity of large-scale training data and the unique spatiotemporal challenges of Equirectangular Projection (ERP), which hinder the direct transfer of perspective models. In this paper, we first present PanoCARLA, a large-scale synthetic RGB-D panoramic video dataset, featuring natural motion trajectories and drone-like roaming perspectives. Building on this foundation, we propose PVDepth, an end-to-end framework adapted from perspective video depth models. To tackle ERP-specific geometric distortions and consequent non-linear temporal dynamics, we introduce two core mechanisms: (1) A Progressive Sphere-aware Noise Initialization strategy that anneals the noise distribution from planar to spherical, guiding the model to adapt to non-uniform information density; and (2) A Cube-rectified Temporal Modeling module that incorporates an auxiliary cubemap temporal branch to rectify non-linear temporal dynamics in the ERP domain. Extensive experiments demonstrate that PVDepth achieves superior performance, generating geometrically accurate and temporally consistent depth sequences. Code and data will be released at https:// github.com/ChuanxinSong/PVDepth.

0.39

PIVOT: A Multi-Trajectory Dataset and Testbed for Pose, Intrinsics, and Novel Viewpoint Evaluation in Real-World 3D Reconstruction

cs.CV cs.AI ·2026-08-26 ·Mary Raymond
benchmark similarity 0.68
Abstract

Neural radiance fields (NeRFs), 3D Gaussian Splatting (3DGS), and related novel-view synthesis methods are commonly evaluated under capture and reconstruction conditions cleaner than those encountered by robots, drones, and autonomous systems. Benchmarks often rely on reconstruction-friendly trajectories, optimized camera poses and intrinsics, and held-out views sampled from trajectories represented during training. These assumptions can obscure performance with measured poses, reusable camera calibration, and structurally different camera paths. We introduce PIVOT (Pose, Intrinsics and Viewpoint Oriented Testbed), a multi-trajectory dataset, processing pipeline, and evaluation framework for independently studying these factors. PIVOT captures each scene using diverse camera trajectories and retains, where available, both sensor-derived measured poses and COLMAP-optimized poses, together with calibrated and optimized camera intrinsics. It defines three benchmark families: (1) seen versus unseen trajectory novel-view generalization, (2) measured versus optimized pose sensitivity, and (3) calibrated versus optimized intrinsics sensitivity. We also introduce a directed pose-space Chamfer distance to quantify how well training poses cover an evaluation trajectory. PIVOT v1 contains five real-world scenes captured with a DJI Mini 4 Pro and provides an open processing and Nerfstudio-based evaluation toolchain. Benchmark results show a consistent quality gap between held-out views on represented trajectories and unseen trajectories, as well as substantial sensitivity to pose source and camera intrinsics.

0.06

Event Detection in Table Tennis Videos using 2D Keypoints

cs.CV ·2026-10-06 ·Rainer Lienhart, Daniel Kienzle, Shin'ichi Satoh, Anastasiia Bilinska
similarity 0.67
Abstract · Accepted at the 9th International ACM Workshop on Multimedia Content Analysis in Sports

This paper addresses the challenge of automatic, frame-accurate event detection in table tennis videos. Current methods for estimating 3d ball trajectories and ball spin typically require that key events, such as ball-racket contacts, have already been identified in advance. This requirement makes it difficult to apply these methods to longer, unedited video recordings. To overcome this limitation, we propose EventNet, a two-stage pipeline to detect key events: (1) 2d keypoints are extracted of the upper-body poses for both players, table corners and ball center. A small keypoint transformer combines them into a compact representation that is robust to changes in viewpoint, lighting, and background clutter. (2) The temporal sequences of these frame-based representations are processed by a transformer encoder that predicts two time-to-event values for each frame, indicating how close the current frame is to the next and previous ball-racket contact. One novelty is a new, temporal cosine-like target signal. Furthermore, we introduce viewpoint augmentation via 3D reprojection and frame-rate augmentation to improve robustness and generalization. Our extensive ablation study gives deeper insights into the importance of various architectural and training aspects. Experimental results show that the proposed approach achieves an F1 score of 91.16% and a mean frame deviation between ground truth and predicted frame of 0.42 on the Latte-MV dataset and 73.08% / 1.16 on the challenging TTHQ dataset. Overall, our work demonstrates that 2d keypoint-based temporal modeling with our EventNet architecture is a promising and practical approach for automatic event detection in table tennis videos.

0.15

PhyMo: Learning Physical Dynamics with Accurate and Continuous Motion from Multi-View Videos

cs.CV ·2026-10-21 ·Shangjia Liu, Jinxi Li, Siyuan Zhou, Bo Yang, Bing Wang
top venue similarity 0.67
Abstract · Accepted at NeurIPS 2026

Recovering dynamic 3D scene geometry, appearance, and the physical motion states that govern scene evolution from multi-view videos is important yet challenging. A key difficulty is that appearance can be deceptive. Under rendering supervision alone, a model may fit the observed images by changing color or opacity to compensate for inaccurate deformation, rather than recovering the true evolving geometry and motion. This issue is especially severe in scenes with fast or locally complex motion, where inaccurate trajectories can still produce plausible images over the observed frames, but lead to unreliable reconstruction and discontinuous future prediction. In this paper, we propose PhyMo, a framework for learning evolving dynamics from multi-view videos. We introduce a Motion-Aware Trajectory Representation that drives the model to recover accurate motion from deformation, rather than relying on appearance shortcuts to explain observed motion. On top of this, we propose a Continuous Motion Evolution module with bidirectional kinematic continuity constraint to promote temporally consistent evolution of displacement, velocity, and acceleration. Together, these designs yield geometrically faithful interpolation and continuous motion extrapolation. Experiments on four dynamic scene benchmarks demonstrate state-of-the-art performance.

0.33

A Plug-and-Play 2D Motion Interface for Real-World Motion Language Models

cs.CV ·2026-08-17 ·Kaname Yokoyama, Norimichi Ukita
top venuecode/data similarity 0.67
Abstract · Accepted to HCMIW at ECCV 2026 (Oral Presentation). Code and demo: https://github.com/irajisamurai/2D-Motion-Interface

Motion Language Models (MoLMs) typically understand human motions by tokenizing 3D motion and processing the resulting tokens using a language model. However, obtaining accurate 3D motions from monocular videos is challenging, limiting their real-world applicability. To address this issue, we introduce a plug-and-play 2D Motion Interface that enables 3D-pretrained MoLMs to accept 2D motion inputs without modifying or fine-tuning the original models. Experiments on public datasets show that our method achieves performance comparable to 3D motion inputs across multiple MoLMs and outperforms training MoLMs from scratch on 2D motions. We further construct a monocular real-world video motion evaluation dataset and introduce a real-video adapter, demonstrating the usefulness of 2D motions over 3D motions under the evaluated monocular pose-estimation setting. These results suggest that 2D motion provides a practical interface for deploying MoLMs in real-world motion understanding settings. Code is available at https://github.com/irajisamurai/2D-Motion-Interface.

0.73

EpiTransfer: Sparse, Training-Free Long-Range Depth Estimation from Temporal Monocular Aerial Frames

cs.RO cs.CV ·2026-09-27 ·Diksha Aggarwal, Rutvik Dagadkhair, Sanjana Srivastava, Bradley Denby, Kevin Kochersberger
similarity 0.67
Abstract

Reliable 3D spatial understanding is essential for autonomous navigation, obstacle avoidance, and scene reconstruction. While state-of-the-art learned depth estimation techniques achieve high accuracy in-distribution, they often generalize poorly to novel viewpoints and altitudes. This paper presents a geometrically derived, training-free depth estimation method using epipolar transfer with only two monocular images and camera pose estimates. By leveraging camera motion to synthesize a virtual stereo pair with a freely chosen baseline, our approach transforms temporal correspondence into a stereo triangulation task while mitigating geometric degeneracies inherent to direct two-view triangulation. Validated across outdoor drone flights (to a maximum range of approximately 90\,m) and indoor OptiTrack environments against LiDAR ground truth, the method achieves an indoor AbsRel of 0.092 and $δ< 1.25$ of 0.940, comparable to direct triangulation (AbsRel 0.073) while retaining valid depth over a larger fraction of challenging scenes, and substantially outperforms off-the-shelf learning-based baselines such as ZoeDepth (AbsRel 0.225) and Depth Anything V2 (AbsRel 0.570), which are not trained or fine-tuned for this domain, with no training data required.

0.16