CS Paper Radar

Deeper Backpropagation or More Updates? Training Looped Language Models Across Budgets

Jiarun Shen, Xiao Li

cs.CL ·submitted 2026-10-28 08:08 UTC · v1

Abstract

Repeating transformer layers can improve language model performance without adding parameters. However, the added computational depth increases both forward and backward computation costs during training. Training such models requires choosing a backward window that controls how many final layer repetitions retain gradients during backpropagation. Longer windows improve per-token learning efficiency but increase per-update cost, while shorter windows reduce per-update cost but sacrifice per-token efficiency. Understanding which window performs better requires examining different training budgets. Prior work compares backward windows across computational budgets. When training budgets increase, it remains unclear whether the same window continues to perform best. We measure how the relative performance of two windows shifts as training budgets grow. Our method isolates per-token efficiency by training both windows on identical data, and compares complete training recipes at approximately equal training time at each budget. Results show that shorter windows lose much of their advantage as budgets grow. Controlled experiments show that both benefits decrease at larger budgets, with a greater decline in the benefit of extended training. Backward window comparisons depend on the available budget, and the preferred window among the tested candidates can change as the budget grows.

Closest papers

Nearest neighbours by meaning across the whole index.

Truncate or Not? A Scaling Study of Looped Transformers with Truncated Backpropagation

cs.LG stat.ML ·2026-10-19 ·Xuyuan Xiong, Siyu Chen, Zihan Shao, Yue Su, Weiyang Jin +3 more
similarity 0.73
Abstract

Looped transformers reuse a shared block of layers to increase computational depth without increasing the number of trainable parameters. They are trained with backpropagation through time (BPTT). To save training compute, BPTT is often truncated to the last few loops, but truncation yields biased gradients that may weaken the benefit of looping. In this work, we study the value of truncation in looped transformer training in a systematic way: we jointly vary model size, training tokens, and forward and backward loop counts across nearly 600 training runs and fit a unified scaling law that captures the effects of looping and truncation through effective parameters. Despite the training-compute savings of truncation, our fitted law favors full BPTT when forward and backward loop counts are jointly optimized. In matched-compute runs, full BPTT through fewer loops consistently outperforms truncated settings of the same compute. The law further shows that at fixed model size, the compute-optimal loop count and training-token budget both grow with compute. When model size is also free, the law identifies two fully trained loops as the best looped setting. Experimentally, this setting achieves lower validation loss than the compute-optimal non-looped model with about 27% fewer non-embedding parameters and only 8% more training compute.

0.51

One Model to Loop Them All: Elastic Latent Recurrence for Language Models

cs.CL ·2026-10-08 ·Faisal Ladhak, Shantanu Acharya, Santiago Akle Serano, Simeng Sun, Boris Ginsburg +1 more
highly cited similarity 0.70
Abstract

A latent recurrent language model applies a shared block of layers repeatedly, so one checkpoint can trade inference compute for accuracy by changing the loop count. At one loop, however, such models typically fall well short of a non-recurrent model of the same size, a one-loop tax that makes a separate non-recurrent model the better choice whenever latency matters. We present Elastic Latent Recurrence (ELR), a recipe for training looped language models without this tax. At one loop, an ELR model costs the same to serve as a non-recurrent model of the same size and, trained on the same data, reaches similar accuracy. Each additional loop then buys more accuracy for more inference compute. Three choices make this work: a gated state update with a learned step size, loop counts mixed within each optimizer update, and conditioning each pass on its loop index and budget. The first two preserve one-loop accuracy, and the third lowers loss at every additional loop. Mixed depths can be introduced late in pretraining to limit the added training cost, and with zero-initialized conditioning added at the switch, this late schedule reaches lower loss than mixed-depth training from scratch. In MoE models, reusing first-loop expert routes on later loops cuts mixed-depth update time by 11.7% with no measurable change in accuracy. At inference, keeping only the last loop's attention KV cache holds attention KV memory at its one-loop level while retaining most of the gain from additional loops. On 4B dense and 30B-A3B MoE hybrid models, ELR at one loop is 0.52 points below and 1.04 points above its matched baseline on a ten-task average, and four loops add 7.25 and 4.75 points. Carried through post-training, the recipe yields Koi-4B, a single checkpoint that scores an estimated 18 on the Artificial Analysis Intelligence Index at one loop, matching Qwen3.5-4B, and 29 at four loops.

0.37

Closing the Loop: Practical Training Recipes for Looped Language Models

cs.CL cs.AI ·2026-09-30 ·Andrei Marchenko, Viacheslav Bezrukov, Oleg Kashurin, Inessa Fedorova, Dmitry Bocharov +3 more
benchmarkhighly cited similarity 0.70
Abstract

Looped language models increase effective depth by repeatedly applying a shared block of layers, but existing large-scale recipes require multi-stage training over trillions of tokens, while the benefits of recurrence remain difficult to separate from differences in data and training. In this work, we establish practical training recipes for looped language models, with three main results. (1) We develop a compute-efficient from-scratch pipeline that reduces the training budget from 7.7T tokens in Ouro to 310B tokens while retaining strong reasoning performance. Pretraining followed by high-quality mid-training, together with learning-rate warmup and stronger exit-gate regularization, enables stable recurrent training without prior multi-stage schedules. (2) Under controlled comparisons, our 1.4B LoopLM outperforms a parameter-matched dense model trained on the same data and token budget on all 12 evaluated benchmarks, including +14 points on GSM8K, +10 on MATH, and +22 on DROP. At matched inference compute, it approaches a 3.9B dense model on mathematical reasoning and reading comprehension while using only 36\% as many parameters. (3) We introduce a minimal recipe for converting pretrained dense models into looped ones: a single learned input-mixing scalar and a smoothed exit loss, with no step-specific parameters. Applied to Qwen3-1.7B-Base, Looped Qwen improves over an identically continued dense baseline on every evaluated benchmark across two data regimes, with statistically clear gains on GSM8K, MATH, and MMLU-Pro on the curated mixture. Together, these results make looped language models substantially cheaper to train from scratch and practical to introduce into existing pretrained checkpoints, while isolating the gains due to recurrence itself.

0.43

LSTM-Style Looped Transformers with Shared KV Caches

cs.LG ·2026-10-23 ·Andreas Kirsch
similarity 0.70
Abstract · 12 pages + 14 pages appendix

Recurrent transformers reuse weights to perform deep computation with fewer parameters. We study an LSTM-style transformer that also shares one key--value cache across its recurrent core. At width 1024, it uses 40.4% fewer parameters than an untied control at nearly matched forward FLOPs, and reduces persistent cache sets from fifteen to four. Parallel training supplies cache entries from a standard-attention pass, whereas continuation reads entries produced recursively using shared attention. We address this mismatch by aligning the two training passes' cache entries with a consistency loss during the final 10% of a fixed training-token budget. Across three model widths on FineWeb, this removes 81--89% of the continuation-loss penalty relative to full-cache evaluation. The improvement replicates on disjoint documents for two training seeds. Across four widths and 1.05--4.19B training tokens, the loss cost of weight tying is smallest at lower token budgets, suggesting an opportunity to use recurrent computation when data and model storage are limited.

0.12

What Makes Recurrence Effective in Looped Language Models?

cs.LG cs.CL ·2026-09-29 ·Xinlin Zhuang, Siyuan Wang, Imran Razzak, Weiyang Liu
similarity 0.70
Abstract · Preprint, under-review

Looped language models (LoopLMs) increase computational depth through parameter sharing, offering a path to scale inference computation without adding parameters. However, it remains unclear when additional recurrence is beneficial and how architectural choices affect its effectiveness. Through controlled experiments, we systematically examine (1) when recurrence helps, (2) where it should be applied, and (3) how its conditioning affects performance. Our evaluation covers inference budgets below, within, and beyond the training horizon under knowledge and reasoning tasks. (1) We find that recurrence can improve reasoning beyond the training horizon while degrading knowledge performance, but harder reasoning instances do not consistently benefit more. (2) Performance also depends on how distinct layers and recurrent iterations are allocated, showing that effective depth alone is insufficient to predict behavior. Non-recurrent output layers improve robustness to under-unrolling, while the preferred placement of input and output layers varies with inference budget. (3) Finally, we find that conventional initial-state injection offers limited robustness to varying recurrence depth. We therefore propose history-state injection as an alternative, and show that channel-wise history-state injection combined with timestep conditioning offers a low-cost and more effective design, better preserving knowledge under extended unrolling while improving robustness across inference budgets. Overall, our results clarify when recurrent computation helps, where it fails, and offer practical guidelines for designing LoopLMs across variable inference budgets.

0.19

UpLoop: Training Looped Transformers via Upcycling at No Extra Pretraining Compute

cs.LG cs.CL ·2026-10-30 ·Cheng Liang, Tengfei Zhang, Ya Zhang, Yanfeng Wang, Zhouhan Lin
similarity 0.69
Abstract

Looped language models can strengthen reasoning through repeated computation with shared weights, increasing execution depth without adding independent parameters. However, each additional pass increases training floating-point operations (FLOPs), making these gains more expensive to obtain. To address this cost, we propose UpLoop, a pretraining schedule that uses upcycling to train looped Transformers while exactly matching a standard dense baseline in final parameter count, total training tokens, and training FLOPs. Specifically, UpLoop begins with a shallow Transformer, progressively grows its depth by copying learned layers, and uses the computation saved early to support repeated execution of a shared middle block later in training. Experiments across model scales show improvements in language modeling and downstream performance, with the average score across 22 downstream tasks increasing from 22.99 to 27.52 at 1.3B parameters. These gains also extend to mathematical reasoning after supervised fine-tuning.

0.13

One Model, Two Paths: Balancing Single-Pass and Looped Performance in Language Models

cs.CL ·2026-10-24 ·Jiarun Shen, Lei Zhao, Xiao Li
similarity 0.69
Abstract

Repeating Transformer layers can improve language-model performance without adding parameters. A pretrained model can be adapted to support both single-pass and looped inference by reusing middle-layer weights for additional computation. Because both paths share weights, training to improve looped predictions can degrade single-pass quality. We study joint training strategies using weighted losses on both outputs, with guidance from the frozen original model. Joint supervision substantially reduces single-pass degradation compared to looped-only training, while preserving looped gains over ordinary continued training. Most of this benefit comes from adjusting the single-pass loss weight, with guidance from the frozen original model further improving the looped output. With validation-selected weights, our method preserves single-pass quality within a predefined tolerance of ordinary continued training while improving looped predictions.

0.12

LoopFold: Parallelizing Recurrent Depth in Looped Transformers

cs.CL ·2026-10-26 ·Feichen Song, Boyi Zeng, Yiqin Hao, Shixiang Song, He Li +5 more
similarity 0.69
Abstract

Looped Transformers increase computation per token by repeatedly applying a shared backbone, offering a way to improve language modeling and downstream task performance at a fixed backbone parameter count. However, each loop depends on the preceding loop, so increasing recurrent depth also increases decoding latency. Existing approaches include Parallel Loop Transformers, which reduce latency by overlapping loop computation across token positions, but yield rapidly diminishing marginal accuracy gains at larger depths. To address this challenge, we introduce LoopFold, which folds computation at multiple recurrent depths into parallel batches for the same token prefix. A lightweight predictor estimates inputs to later loops so they can start before earlier loops finish. A corrector then refines the outputs of these later loops using newly available results from earlier loops. All components are trained jointly using only the final next-token prediction loss. In experiments with 1.4B models, deeper LoopFold configurations achieve progressively higher average zero-shot accuracy across eight tasks, rising from 53.41% to 56.38%. Vanilla looped models and PLT show limited gains over the same depth range. Compared with a nine-loop vanilla model, LoopFold uses five sequential stages and additional parallel computation to reduce decoding latency by 46%.

0.07