CS Paper Radar

AlbumVSR: Identity-Preserving Face Video Super-Resolution from a Personal Photo Album

Nianyao Du, Xijun Wang, Stanley H. Chan

cs.CV eess.IV ·submitted 2026-10-28 22:26 UTC · v1
benchmark

Abstract

Severe blur, downsampling, noise, and compression can erase the identity cues needed to faithfully restore a person's face. We therefore use photographs of the same person as an external source of identity. AlbumVSR conditions a frozen, one-step streaming diffusion transformer on a personal album. We use four MagFace/CLIP set tokens to encode the album, and 64 texture tokens which come from a fused UV atlas rendered at the current window's estimated face pose. These tokens are appended to the transformer's cached cross-attention context. On an identity-disjoint VoxCeleb2 benchmark with heavy synthetic degradation, AlbumVSR raises ArcFace similarity to the ground truth from 0.586 to 0.670 and face PSNR from 24.98 to 26.71 dB. On the 91 test identities, its mean identity similarity is higher than that of all 14 baselines.

Comment
5 pages, 2 figures, 2 tables. Nianyao Du and Xijun Wang contributed equally

Closest papers

Nearest neighbours by meaning across the whole index.

Toward Sub-1 kB Identity-Preserving Face Compression: A Benchmark of Codecs, a Custom Learned Codec, and Studies of Resolution, Demographic Fairness, Recompression, and Adversarial Robustness

cs.CV ·2026-08-24 ·Petr Hurtik, Jakub Sochor
benchmark similarity 0.66
Abstract

Storing face images under a hard sub-kilobyte budget, as required for identity documents, smart-card biometrics and bandwidth-constrained verification, forces a codec to discard most of the signal while keeping what a face matcher actually reads: identity. Generic codecs optimize pixel fidelity, not the embedding distances that drive verification, so which codec, resolution and setting best preserve identity at 1024 bytes or less, and how that degrades at 512, is unclear. We benchmark ten general and face-specific codecs across resolutions, byte budgets, two datasets (controlled Color FERET, in-the-wild AI-Solutions-KK) and four anchor face matchers, with a fourteen-model ViT and CNN roster confirming the ranking is backbone-invariant. We then train a custom identity-preserving codec that hits the byte budget exactly via binary search over a frozen gain table, and run four studies: resolution, demographic fairness, recompression, and no-box adversarial robustness. Sub-kilobyte identity preservation is feasible, but which codec to deploy depends entirely on the budget. At 1024 bytes and the 112 px working resolution the problem is close to solved: modern codecs hold Color FERET equal-error rate under 0.35 percent on the ArcFace anchor. At 512 bytes the field re-sorts: AVIF, HEIF, JPEG XL and legacy JPEG collapse to 28 to 98 percent false-non-match rate at FMR 1e-4, while WebP, JPEG-AI and our byte-budgeted learned codecs stay out of that band, with 24.3 percent for WebP against 6.9 percent for our accurate variant in the wild. That re-sort, not the 1024-byte ranking, is the operational result: a codec chosen at 1 kB is not the codec to deploy at half that.

0.16

IDPrior: Decoupling Identity Generation from Facial Image Synthesis

cs.CV ·2026-11-05 ·Fadi Boutros, Meriç Demirörs, Darian Tomašević, Vitomir Štruc, Naser Damer
publishedcode/data similarity 0.62
Abstract · Accepted at WACV 2027

Large-scale identity-labeled face datasets are essential for training modern face recognition models, yet collecting and annotating such data is costly and raises privacy and ethical concerns. Existing synthetic face generation methods typically derive identities from predefined class labels, unconditional image generation, or predefined latent sampling strategies, without explicitly modeling the underlying distribution of facial identities. In this paper, we propose IDPrior, a two-stage framework that decouples identity generation from image synthesis. We first learn a diffusion prior in the embedding space of a pretrained face recognition model to model the distribution of facial identities and generate novel identity embeddings. These embeddings are then used to condition a pretrained identity-conditioned diffusion model (DM), enabling the synthesis of multiple images of the same identity. This modular design provides a scalable approach to identity generation while remaining compatible with existing and future identity-conditioned DMs. Experiments indicate that IDPrior generates diverse and well-separated identities while maintaining a closer correspondence to the distribution of authentic identities. Face recognition models trained on datasets generated using IDPrior-generated identities achieve competitive or improved performance compared with existing synthetic-data-based methods across multiple face verification benchmarks. Code and generated datasets are publicly available at https://github.com/fdbtrs/IDperturb.

0.38

Benchmarking Spatial, Spectral, and Self-Supervised Cues for Face Forgery Detection under Realistic Degradation

cs.CV ·2026-09-01 ·Lucas Cunha, Lucas Sotomaior, Lucas Gasperin, Beatriz Caldas, Eduardo Pianovski +1 more
publishedbenchmarkcode/data similarity 0.60
Abstract · Accepted for presentation at the 2026 Conference on Graphics, Patterns and Images (SIBGRAPI)

Face forgery detectors often achieve strong results on controlled benchmarks, but their reliability under realistic image degradations remains limited. This paper presents a standardized benchmark for face forgery detection using the Multi-Dimensional Face Forgery Image (MFFI) dataset and evaluates performance on both clean and degraded test partitions. We compare six model families, including convolutional networks, transformer-based models, and a frozen self-supervised DINOv3 backbone, across spatial, spectral, and hybrid input representations. The results show that clean-set performance is not a reliable indicator of robustness under compression, resizing, and blurring. Xception with RGB obtains the best clean performance, reaching 0.884 mean ROC-AUC, but degrades substantially on the harder partition. In contrast, frozen DINOv3 achieves the strongest degraded-set result, with 0.726 mean ROC-AUC, while training only a linear classification head. The representation analysis indicates that Fourier-domain cues are most useful when combined with RGB information, whereas purely spectral inputs consistently underperform spatial representations. Qualitative attribution maps further suggest that convolutional detectors focus on localized artifacts, while DINOv3 relies on broader facial structure. These findings reinforce the need for degraded evaluation protocols and highlight self-supervised visual representations as a promising direction for robust face forgery detection. Our source code is publicly available at https://github.com/lucasdocunha/FaceForgery-Benchmark/.

0.35

ONOT/TONO-Print: A Paired Benchmark for Identity-Document Portrait Quality under Document Production Shift

cs.CV ·2026-10-24 ·Alexander Vinogradov
benchmarkunusual similarity 0.60
Abstract · 2 pages, 2 figures, 2 tables

Identity-document portraits are modified during document production by printing, engraving, and integration into the document template. These transformations may change image texture, contrast, colour, and other visual properties without necessarily changing the underlying biometric or presentation information. In this work, we introduce ONOT/TONO-Print, a small paired benchmark for evaluating face-image quality models under identity-document production shift. The benchmark is based on ONOT and TONO portraits and contains synthetic variants representing five common production techniques: toner, inkjet, dye sublimation, laser engraving, and thermal transfer. A smaller physical subset contains portraits printed and scanned using inkjet and toner devices. The benchmark is used to compare the behaviour of biometric and ICAO-related face-quality components before and after production. Results show that production can introduce substantial domain shift for some quality estimators, while other models remain comparatively stable.

0.23

HYDRO: Towards Non-Reversible Face De-Identification Using a High-Fidelity Hybrid Diffusion and Target-Oriented Approach

cs.CV ·2026-09-22 ·Felix Rosberg, Vitomir Štruc, Cristofer Englund, Eren Erdal Aksoy, Fernando Alonso-Fernandez
similarity 0.60
Abstract

Target-oriented face de-identification models aim to anonymize the identity of a target individual across different images or video frames, such that the target can no longer be reliably recognized, while maintaining key characteristics of the visual data. Such models commonly leverage generative encoder-decoder architectures to manipulate facial appearances, enabling them to produce realistic high-fidelity de-identification results, while ensuring considerable attribute-retention capabilities. However, target-oriented models also carry the risk of inadvertently preserving subtle identity cues, making them (potentially) reversible and susceptible to reconstruction attacks. To address this problem, we introduce in this paper a novel (robust) face de-identification approach, called HYDRO, that combines target-oriented models with a dedicated diffusion process specifically designed to destroy any imperceptible information that may allow learning to reverse the de-identification procedure. HYDRO first de-identifies the given face image, injects noise into the de-identification result to impede reconstruction, and then applies a diffusion-based recovery step to improve fidelity and minimize the impact of the noising process on the data characteristics. To further improve image fidelity and better retain gaze directions, a novel Eye Similarity Discriminator (ESD) is also introduced and incorporated it into the training of HYDRO. Extensive quantitative and qualitative experiments on three diverse datasets demonstrate that HYDRO exhibits state-of-the-art (SOTA) fidelity and attribute-retention capabilities, while being the only target-oriented method resilient against reconstruction attacks. In comparison to multiple SOTA competitors, HYDRO reduces the success of reconstruction attacks by 85.7% on average.

0.16

Domain-Tuned Diffusion Super-Resolution for 4K Facial Asset Maps

cs.CV cs.AIcs.GR ·2026-11-16 ·Elly Akhoundi, Mathieu Lamarre, Thibault Goyallon, Patrick Anderson, Étienne Danvoye
top venue similarity 0.60
Abstract · Accepted to SIGGRAPH Asia 2026 Technical Communications. 4 pages

Physically based facial assets require 4K albedo and displacement maps for cinematic close-ups, yet generative pipelines commonly produce them at only 1K. Naively applying photographic super-resolution is a poor fit: facial UV maps have domain-specific statistics, and displacement is a scalar height field whose errors directly distort geometry. We present a domain-tuned diffusion upscaler for 4x (1024 to 4096) facial asset super-resolution. Starting from a bilinearly upsampled map, we adapt a frozen SDXL backbone per modality with lightweight LoRA modules, while a Tile ControlNet preserves input structure as the diffusion prior restores pore- and wrinkle-scale detail. On held-out maps, our method produces sharper, more faithful detail than bilinear and off-the-shelf GAN and diffusion super-resolvers, reducing albedo LPIPS from 0.21 to 0.08 while avoiding misplaced or excessive displacement relief. These results show that lightweight domain adaptation can produce render-ready 4K facial asset maps without a custom super-resolution architecture.

0.45

Doctor Trigger: A Framework for Release-Bound Face Verification

cs.CR ·2026-10-12 ·Chia-Ming Lee, Chia-Yu Lin, Hung-Kai Huang, Yi-Ting Ku, Yu-Chen Liang +1 more
code/data similarity 0.59
Abstract · View our project page: https://ming053l.github.io/Doctor-Trigger/

Face swapping and generative editing enable realistic facial manipulation, while online redistribution complicates publisher oversight of circulating face images. Existing approaches establish provenance, detect manipulation, recover embedded watermarks, verify image integrity, or disrupt unauthorized face manipulation. These capabilities do not necessarily establish consistency with a specific publisher-enrolled release, limiting the evidence available for verification and human review. To address this gap, we introduce Doctor Trigger, a framework for verifying circulating faces against private publisher-held release records. Before publication, the publisher embeds a weak keyed Fourier-phase signal in each face while preserving visual fidelity and stores its spectral reference. Afterward, verification compares the circulating face with that reference and uses key projection to measure retention of the release-specific signal. Therefore, relation and key evidence jointly help publishers identify suspicious copies for review, potentially reducing the circulation of manipulated images. Experimental results across FF++, DFDC, and Celeb-DF show that spectral agreement separates tested face swaps and generative manipulations from enrolled releases, while the keyed signal distinguishes published versions from their unreleased originals under the evaluated key-preserving benign transformations. Doctor Trigger complements provenance metadata with release-specific face verification and record-linked evidence for further assessment.

0.40

FANVIDv2: Evaluating Video Super-Resolution by Face and Licence-Plate Recognition Under Compound Degradation

cs.CV ·2026-09-30 ·Kavitha Viswanathan, Vrinda Goel, Shlesh Gholap, Devayan Ghosh, Madhav Gupta +3 more
benchmark similarity 0.59
Abstract

Video super-resolution (VSR) is normally judged by PSNR and SSIM on clips that were downsampled bicubically, although in surveillance its purpose is to make faces and licence plates \emph{recognisable}. We present FANVIDv2, a benchmark that scores VSR by what a recognition pipeline can do with its output. FANVIDv2 provides $320\times180$ low-resolution (LR) clips with high-resolution (HR) references for 48 public figures (with one HR gallery image each) and 375 licence-plate clips covering 360 distinct plate strings. LR clips are generated with a randomised compound degradation (blur, resize jitter, sensor noise, JPEG compression, final downsampling) rather than bicubic downsampling alone. Two metrics score recognition \emph{inside} detections: FaceRecBox rewards a face only if it is localised and correctly identified, and TextRecBox scores plate transcriptions by normalised edit distance weighted by localisation quality. With a 2.3\,M-parameter VSR baseline (RCDM), FaceRecBox rises from 0.6864 to 0.7222, identity accuracy on matched faces from 84.35\% to 86.93\%, and TextRecBox from 0.3088 to 0.3667; a residual-map gated variant (RCDM-RMGF) reaches 0.3801 on plates. We describe the degradation model, the baseline architectures and the scorers in detail, and release annotations, metadata, download and degradation scripts and evaluation code.

0.25